Selecting every nth object in my selection

Similar Questions

• Deletion of every nth frame (new)

  Hey all,.

  I have a video where every single 5th picture is a duplicate. So I need frames 0,1,2,3 - 5,6,7,8 - 10,11,12,13 - etc...

  I saw this post , but I myself am not familiar with the expressions enough write just by that one proposed by the person.

  I found some suggestions the name such as:

  f = timeToFrames();

  n = Math.floor (f/5);

  framesToTime (n-f);

  Also this video YouTube randomly I can not find:

  f = timeToFrames();

  p = Math.floor (f/1);

  framesToTime(p*1.5);

  Neither work. Executives are starting to jump erratically. 2 images at the same time, then 150 executives, etc. etc.

  Programming generally go and ignore every nth number I would just do a modulo check and ignore any sum 0. Something like:

  f = timeToFrames();

  n = f 5%;

  If (n == 0) {f ++ ;}}

  framesToTime (f);

  This product also some really weird framework counties even if she's not jump to hundreds eratically. It simply doesn't get it.

  How would jump all 5 images?

  Thanks for the tips!

  Try this as your time remapping of expression:

  framesToTime (Math.floor (timeToFrames () * 1.25)+ 0);

  IMPORTANT: you need to replace the ' + 0 ' at the end of the expression as an integer between 0 and 4 that SUITS YOUR NEEDS. '+ 1' worked for me, but your video on determines this number, you need to try all 5 integers.

  Not an elegant solution at all, but it worked for me.

• I don't get the desired pulse a counter in an SMU-6363 on every nth in pulse.

  I am in a position certain characteristics of the impulses of the encoder. I need to generate a pulse ON this about-face with every pulse of the nth encoder in.

  This impulse generated will be used to trigger measures andcounter analog acquisition on other counters in the SMU-6363.

  I have attached my code. I expect to have a pulse on the same length of high and low.

  This is not the case. What I'm doing wrong here? I use SMU-6363.

  Magyar salvation,

  It is not a voltage divider (the 6363 input impedance is > 10 GOhm), but rather what we call 'ghosts' where high source impedance increases the time of the multiplexer and causes channels to affect another.  The behavior you reported in your other post has the same cause.

  I think that the same behavior is at the origin of many of the dupilcate to be registered where the output of the ctr is 0V and the output of the encoder is 5V (or perhaps transiiton of 0 to 5V).  When the MUX switches to 0V on the 5V channel, it takes time to charge the capacitor 100 pF on the ADC.  The amount of time it takes is relatively high due to the resistance of 10kOhm (on your encoder) that the capacitor will charge through.  Meanwhile, the line (as evidenced by the counter input source) is obviously drawn below the TTL and causing a double edge to be registered.

  

  Digital filtering still may not be a bad idea, even with the encoder active drive as source counter line is always connected to the entrance of a multiplexer - when there is no doubt that I generally include it for good measure.

  Best regards

• Object grants to users and roles

  A question about the Oracle grants. Searched and found wires that are close, but not exactly what I'm looking for.
  I'm on an Oracle 10 g Enterprise Edition (64-bit) database running on Sun Solaris 5.10
  
  We have a test database (say TEST1) having 2 schema SCHEMA1 and SCHEMA2. These patterns have nearly 2000 items in each of them.
  Then we have a different database (say TEST2) with the same 2 schemas with the same name and containing as many objects.
  
  My goal is to export these two patterns of TEST1 and import them into TEST2. By doing this, I chose the path is, am I completely drop every single object from the 2 diagrams in TEST2. And then, do an import. I do import with grants = y option enabled.
  
  The dilemma I am, is that, although the DDLS objects are identical between SCHEMA1 and SCHEMA2 TEST1, SCHEMA1 and SCHEMA2 TEST2 respectively, users on the databases are different. Of course, I like to keep all subsidies of the object to other users in TEST2 after my import just the way which is prior to importation. So, looking for a way to pre-generate a script before the Tomb object so that I can just run the script and retrieve all my grants do lose I. as...
  GRANT SELECT ON TEST2.table10 to USER01;
  GRANT INSERT ON TEST2.table10 to USER02.
  GRANT INSERT ON TEST2.table20 to USER02;...
  
  (I really don't like if the TEST1 grants is imported when you import, thus introducing unnecessary grants... wanted to just make sure that TEST2 does not lose a thing)
  
  Another round here, is that we also have a good amount of roles that have received subsidies for SCHEMA1 and SCHEMA2 of TEST2 database objects. How to generate a script that has something like...
  
  GRANT SELECT ON TEST2.table1 to ROLE1.
  GRANT INSERT ON TEST2.table1 to ROLE2.
  GRANT INSERT ON TEST2.table2 to ROLE2;...
  
  Thank you

  You can start from these scripts:

  SQL> grant select on a.t13 to b;
  
  Grant succeeded.
  
  SQL> select 'grant ' || privilege || ' on ' || owner || '.' || table_name || ' to ' || grantee || ';'
    2  from dba_tab_privs
    3  where owner = 'A'
    4  /
  
  'GRANT'||PRIVILEGE||'ON'||OWNER||'.'||TABLE_NAME||'TO'||GRANTEE||';'
  ------------------------------------------------------------------------------------------------------------------------------
  grant SELECT on A.T13 to B;
  
  SQL> create role role1;
  
  Role created.
  
  SQL> grant insert, delete on a.t10 to role1;
  
  Grant succeeded.
  
  SQL>  select 'grant ' || privilege || ' on ' || owner || '.' || table_name || ' to ' || role || ';'
    2  from role_tab_privs
    3  where owner = 'A'
    4  /
  
  'GRANT'||PRIVILEGE||'ON'||OWNER||'.'||TABLE_NAME||'TO'||ROLE||';'
  ------------------------------------------------------------------------------------------------------------------------------
  grant INSERT on A.T10 to ROLE1;
  grant DELETE on A.T10 to ROLE1;
  

  With greetings
  Krystian Zieja

• write to the file of the measure to every n iterations

  Hi guys,.

  I would like to help with recording data labview 2010 SP1 (database development system). I use a 'writing custom wire express VI' inside a while loop and the DAQmn Read data is wired on the signal in the "writing custom wire express VI.

  How I wired it's the VI saves the data to a text file after that he recorded 100 samples (the nuber of samples to read in this case was set at 100). I would like to know if there is a way to control the speed at which the express VI saves the data. As in, I want the express VI to record data at specified time intervals or every nth iteration. I have attached the main VI and its 2 screws Sub for reference. Please let know if someone can help me solve this problem. Thanks for your time and your contributions in this regard.

  REDA

  

  Savings of 1000 words

• Is possible to name the objects in the HTML code of muse?

  I'm a graphic designer to work whit a programmer to make Web sites. We want to work togher me taking care of him and graphic part work whit code PHP CSS and all other coding things in really offen my programmer, Web sites have to work whit code the HTML of my muse sites and they have a lot of problem to find the names of the objects in the code because muse give them nemes as CFG67 and for him it's really hard to find an object in the Code since I can't give them a few names.

  Therefore, it is possible to give a name to every graphical object, I did Muse?

  Hello

  Please see the post on the forum for the same below.

  Adding Custom id, & css to the elements class

  in the Muse, you cannot change the classes, IDs that are generated by Muse, however you can click on the link below and vote in favour of the idea of introducing this feature of Muse.

  Add id and custom classes

  Concerning

  Vivek

• HOWTO return a new object of a script object

  Hello

  I wonder about the fact that it is not able to return a new object from an existing script object in a field of LiveCycle Designer.

  Let's say we have follwing situation:

  1. a Script object named 'LcdObjects' with a 'field': object

  function Field(som) {
   this.som = som;
   
   this.hideField = function() {
    som.presence = "hidden";
   }
  }
  

  2. now I want to create a new instance of the object of 'field' in a text field (in the case of 'click'):

  f = new LcdObjects.Field(this);
  f.hideField();
  

  3. the code above doesn't work with the text field. It seems that there is no new object created.

  4. it seems that I must create an auxiliary function for each object in the script object to get a successful return of a new object:

  function newField(som) { 
      return new Field(som); 
  }
  

  5. with the auxiliary function, I can create a new instance of the Field object in my text field:

  f = LcdObjects.newField(this);
  f.hideField();
  

  But I'm not very happy with this solution, because with this workaround, I have to create an auxiliary function to return for every single object which does not seem to be very smart to me.

  Are there any general solution to return an instance of an object without using this kind of workaround?

  Thank you.

  Hello

  You can add a function to a script object that returns your "Field" object with the method hideField. So, as a function;

  function Field (field)

  {

  var that = {'field': field};

  that.hideField = function()

  {

  This.Field.Presence = 'hidden ';

  }

  Back to this;

  }

  Could be called by

  LcdObjects.Field (TextField1) .hideField ();

  Concerning

  Bruce

• Strange display with dynamic objects problem

  I ran on a question which is kind of a killer for me at the moment because it affects such a large percentage of my current project.

  I am building a sheet of sprite to hand off to developers for the iPhone, and the way I put it in place is each separate item, that I need to come back, I created a dynamic object. It seems, however, that it is question of rendering that affect almost every dynamic object I in the document.

  All I can say, the lowest line of pixels of the dynamic object is taken directly underneath, and the highest row of pixels is cut off. This happens even if the content of the dynamic object are not touching the edges of the canvas.

  Here is an example, the only difference between these two screenshots is that the first icon is surrounded by empty space, and in the second I added a layer to fill the background. The issue is still occurring the second shot, it happens just the background rather than the layer

  
  http://DL.dropbox.com/u/1400235/screenshots/screen%20shot%202011-04-18%20at%2012.55.33%20P M.png

  http://DL.dropbox.com/u/1400235/screenshots/screen%20shot%202011-04-18%20at%2012.55.45%20P M.png

  You can see in the first there are two rows of pixels above and below the circle and in the second row from the top is cut off and the last row repeats.

  Happening in CS4 and 5 and seems to be making every smart object in the document.

  We never seen it before?

  Set up the order of processing for one of these smart objects - and ensure that it is not offset by half a pixel due to odd size or rotation.

• Change the default object attributes

  In a document that I created, I mistakenly put in place so that each new form, I create, a box for example, takes on several corners rounded such as effects drop shadow and outer glow, I want.

  I asked these attributes to an object sometimes return to this document, but it was intended only for that one. Now, it happens to every new object.

  How to simply set things back to neutral?

  Window > object Styles

  You may have created a new Style of object or changed the graphic block by default

• Effectively reach views with the same underlying objects?

  I have 3 views of the end user, and they all 2 underlying objects in common (1 table, 1 review).
  
  Example:
  a = table
  b = view
  c - e = support for tables
  
  View 1:
  Of a, b, c
  WHERE THE...
  
  View 2:
  Of a, b, d
  WHERE THE...
  
  View 3:
  Of a, b, e
  WHERE THE...
  
  Is there a way to allow end users to bring together these 3 points of view while limiting the number of times that the underlying objects are accessible? Ideally, Oracle would have access every underlying object only once by request of the end user, even if all 3 views are used in the query. Oracle is hitting the underlying objects once by the sight of the end user in the query.
  
  In addition, the underlying view (b) cannot be converted to a materialized view because of the size of the data obtained.
  
  1 option would be to combine all the columns in the view end user 3 in 1 larger view. However, they currently each have their own use functional and consequently were designed to be separate.
  
  Thanks for your suggestions.

  The general with this kind of structure problem of the view, it is essentially impossible to the optimizer to know that this table should only be consulted once because the logic in any particular view could exclude a line that another view would return or could cause a single row of has to join several lines in table B. It is generally not possible for the optimizer determine that a query that joins A table in three different views could be rewritten to have a single reference to a rather than an intentional 3-way table A self-join.

  You will find many people who complain the performance of queries that use views not because the views improve intrinsically, but because someone has designed a very generic view layer and apparently simple queries join now to a bunch of tables, they don't really need to get the columns are not referencing or perform some other inexpensive filter which is not really necessary.

  If performance is a problem, you could change the view layer so that users do not have to join three distinct views of which attached to the same table? Or you could allow users to reach the underlying tables for queries that require higher levels of performance?

  Justin

• How to display all the other images in the image indicator

  Hi all

  I use IMAQ for capture and record high freq and images high resolution. I have an indicator of image directly from 'Image Grab acquire'. Thus, the indicator image displays images at very high frequency too. To display frames, but not necessarily all alone (enough so that the operator can see what's happening). So, I wonder how I can view, say all the other images (for example all the odd/even number of images), or jump on two and show the third?

  Any help will be appreciated!

  Thank you!

  Wenlong

  Here are some general observations.

  • Image acquisition is "a horse of a different color" - in contrast to many other I/o devices, the memory containing the data (here called the "buffer") is handled by the driver and is not directly available for LabVIEW.
  • I'm guessing that you are using hardware OR video, because you use the IMAQ functions (I used only IMAQdx).  Is this true?  What camera do you use?
  • The (probably) "Awakenings" IMAQ extraction buffer herself to the camera (I say 'probably' because I don't know the hardware you use).  This means that While the loop containing it will work at the rate of the camera images (so you can easily calculate the frame rate, as your example code).

  This looks like a routine NI Demo, so I think that you don't have much experience with the treatment of Vision.  If you have a lot of other LabVIEW experience, you should be able to make the leap to the vision, once you have the idea of the functioning of the buffers.  Unfortunately, there isn't much in the way of tutorials and white papers on Vision than on other subjects of LabVIEW.

  Yes to your question - how to view every Nth frame.  This is the loop key (which arises directly from your code):

  

  As menioned above, this routine is 'clocked' by the function of extraction buffer.  What you do to display each image is th is to place control of the Image inside something like a Case statement that "triggers" each nth time.

  Here is a version of 'Nth' of the loop above (details omitted)-

  

  We always roll the filling of each buffer with a frame loop.  But we then use the whole function divide to select the nth image (those who have a remainder of 0 when i is divided by n-th) and of the 'image' line (it does not really an image) for 'Image' control, with the other case being "Default" (for all the other Valentine go) and nothing inside.  Thus each nth time in this loop, the output of the extraction buffer is the wire to an Image (and displayed), the other N-1 times the thread is going nowhere.

  Bob Schor

• At halfway to filling of forms

  I'm on a Mac using InDesign CS6.

  I'm trying to create a square, circle or any shape and fill it with a color or a picture and it only fills to half way. How can I get the whole form to fill out? A I hit a wrong button somewhere?

  with nothing selected, go to object > effect > gradient feather

  It is verified and must be unchecked. He applied every new object you create.

• FocusEvent.MOUSE_FOCUS_CHANGE bug...

  When an object with tabEnabled = false is clicked, the default behavior is to remove the development of the object that currently has the focus and set to null, after firing a MOUSE_FOCUS_CHANGE event.

  That event and the behavior is supposed to be voidable, but it fires at all and the problem occurs in any case, when the selected object is already activated.

  The problem is that when you click on an object in flash, tabEnabled is false by default, so a MOUSE_FOCUS_CHANGE event occurs.  If you do not cancel the default behavior, the focus is set to null and a FOCUS_OUT event is triggered on the object that is used to have the focus and relatedObject property event is null (because the update becomes null).

  I tried to override this default behavior to prevent FOCUS_OUT events have relatedObjects null, because for some objects like the context menu, I would check if the object receiving focus is a child of the context menu, in which case I don't want to close the menu.  Because the default mechanism affects the focus to null when the user clicks on an object with tabEnabled, I have tabEnabled true for every conceivable object that may appear as a child in the menu (sorry, not going to happen), or I have to prevent and override the default behavior of MOUSE_FOCUS_CHANGE and give focus to the object despite his tabEnabled property in order to ensure the relatedObject FOCUS_OUT event is not null, then the Manager can check if focus leaves actually higher for the context menu container.

  It's exactly what I did.

  But it does not work when the selected object is already activated.

  In this case, focus is force removed from the object without any event MOUSE_FOCUS_CHANGE never fired.  As it is easy to see how it was unnoticed, because technically the object with the focus is activated, if no event is generated.  However, it is always follow through with the "tabEnabled = false null so the update" behavior, without bringing a change of focus of the mouse event.  It is obviously a simple programming error in Flash Player.  If the focus will be changed as a result of a mouse click, then the mouse focus change event should fire, giving me the opportunity to cancel it.  Furthermore, if the selected object already has the focus and the player opts not to a focus change event, then he subsequently should not set the focus to a null value, as is currently a diligent and illogical way to.

  You can see this behavior exposed by running the following code on the main timeline script; It is a completely stand-alone:

  import flash.events.MouseEvent;
  import flash.events.Event;
  import flash.events.FocusEvent;
  import flash.display.InteractiveObject;
  import flash.display.Sprite;
  var box:Sprite = new Sprite();
  box.graphics.beginFill( 0x000000, 1 );
  box.graphics.drawRect( 100, 100, 100, 100 ); //100x100 rectangle offset 100px on each axis
  box.graphics.endFill();
  box.tabEnabled = false; //focus not assigned by mouse click; we will override this behavior
  box.mouseChildren = false; //treat as single region for sake of clicking, do not distinguish clicks on child objects from that of the parent
  box.addEventListener( flash.events.MouseEvent.MOUSE_DOWN, mouseDown, false, 0, true );
  box.addEventListener( flash.events.FocusEvent.FOCUS_IN, focusIn, false, 0, true );
  box.addEventListener( flash.events.FocusEvent.FOCUS_OUT, focusOut, false, 0, true );
  addChild( box );
  stage.addEventListener( flash.events.FocusEvent.MOUSE_FOCUS_CHANGE, mouseFocusChange, false, 0, true );
  
  function mouseDown( e:MouseEvent ):void {trace( "mouseDown on " + e.target );}
  function focusIn( e:FocusEvent ):void {trace( "focus gained on box, focus used to be " + e.relatedObject );}
  function focusOut( e:FocusEvent ):void {trace( "focus lost on box, focus becoming " + e.relatedObject );}
  
  function mouseFocusChange( e:FocusEvent ):void
  {
   if (e.relatedObject != null) //object receiving the focus
   {
   trace("mouseFocusChange to " + e.relatedObject + " from " + e.target );
   if (!e.relatedObject.tabEnabled)
   {
   //override default behavior that would set the focus to null, and go ahead and give focus to the clicked object in spite of its tabEnabled value
   trace("overriding tabEnabled=false behavior, and assigning focus to clicked object anyway");
   e.stopImmediatePropagation();
   e.preventDefault();
   stage.focus = e.relatedObject;
   }
   //else proceed with default mouseFocusChange behavior
   }
   else
   trace("mouseFocusChange to nothing from " + e.target );
  }

  When you run this, click on a box and observe the output.  The default behavior is overridden, as the focus of the mouse change event is cancelled and development is attributed to the area despite its false tabEnabled value.

  
  Display of debugs after 1 click:

  mouseFocusChange to [object Sprite] [object Stage]

  the substitution of tabEnabled = wrong behavior and assigning focus to the selected still object

  Update won on the box, development used to be null

  mouseDown on [object Sprite]

  When you click on the box, a second time, I would expect either nothing would happen, because the object is already activated, OR I expect the focus change event to fire again, as the player (as you'll see) always plans to set the focus on a null value because tabEnabled is false.  Instead, you will see that the focus is set to null, but no MOUSE_FOCUS_CHANGE is never sent in advance to give you the opportunity to cancel the default behavior.

  Display of debugs after 2nd click:

  lost on the box, development becomes null

  mouseDown on [object Sprite]

  If you check a second time, you will see that it is the first release since the selected object has no focus more.  It toggles back whenever you click on it.  Unless I'm missing something, it is a critical flaw in case the system that makes the interception of the MOUSE_FOCUS_CHANGE useless, since the default behavior cannot be intercepted or prevented when the selected object already has the focus and tabEnabled is false.

  I hope that someone who is interested after I submitted a bug report, now that we have talked about this a little, but anyway... I did a workaround solution that is a kind of common ground.

  This will work with all existing complex controls, more that you don't have to bother with setting tabEnabled on any of her children, and fundamentally changes the default focus behavior from Exchange:

  "If tabEnabled is false on the selected object, set the focus to null.

  TO

  "If tabEnabled is false on the object selected, walk the parent chain until find you one with tabEnabled = true and set the focus to the"

  The new logic works MUCH better than the default, it avoids the edge case to leave the focus on an object not compatible tab, and there to side effect to allow the update to bubble up to a parent object that is supposed to have the focus.  All you have to do is to make sure that the main command has set tabEnabled true and you can leave all children objects only.  You can even keep true mouseChildren to allow events occur on children, such as when your control is so complex he sub-controls on it.

  The Manager are:

  private void mouse_focus_change (e:FocusEvent): void

  {

  If (e.relatedObject! = null)

  {

  target: var InteractiveObject = e.relatedObject;

  If (! target.tabEnabled)

  {

  try to find the parent with tabEnabled object and set the focus to the

  var p:DisplayObjectContainer = target.parent;

  While (p! = null)

  {

  If (p.tabEnabled)

  {

  override the default behavior, which could affect the focus to null,

  and go ahead and give focus to the selected despite its tabEnabled value object

  or rather to give focus to the first parent tabEnabled = true (due to a bug that occurs if we focus on a non-tabEnabled object)

  trace ("mouseFocusChange rerouting to" + p + "instead of" + e.relatedObject);

  e.stopImmediatePropagation ();

  e.preventDefault ();

  stage.focus = p; assignFocus (p, GUIFocusManagerEvent.DIRECTION_NONE, GUIFocusManagerEvent.CAUSE_MOUSE);

  return; //

  }

  p = p.parent;

  }

  }

  }

  }

• Large black spot on the page and pasteboard

  I use CS3, InDesign worm. 5

  I have 100 pages (type, a book page 440), with a large, 1 x 3, solid black spot (a double sequence) that extends from the top of the chessboard of paste into the document of 1.5 inches on a single page. Sometimes it disappears, sometimes it reappears. I exported the file to PDF (for printing high quality). It was not visible in the PDF, but it printed (printing of digital book CreateSpace).

  The task cannot be selected, moved, etc.

  The file contains four layers. The task is primarily associated with a single layer. However, when I turn this layer or all the layers off the coast, only the part of the task inside the text box disappears. The part which exceeds the frame of text on the page and the remains of cardboard.

  The blemmish appeared during a crisis of sneezing (allergies) while I was working on the document. I touched or that you clicked on something, but I have no idea what.

  • I moved out of the page, the text block, and a new time, not linked, given. Most of the task moves with the original text block (everything that was inside the frame and the part on the outside). I made a new image and the task has returned - now in two locations: in full size on the page, and most of it on the block of text on the pasteboard.
    
  • I deleted the page, created a new page and created a new block of text. As I entered the new text, the task has reappeared.
  • I exported the File Interchange format. The task remained.
  • I deleted the default settings of InDesign and saved data files. The task remained.

  I can cover it with a full framework of white: However, I do not know if it will work in fact when the book is printed. And if this is the case, I can't delete the part that covers the text.

  Walton

  waltonm wrote:

  I've linked a copy of page problem here is a postal fold of the indd file packed; Therefore, the fonts are included.

  Walton.

  I exported the IDML file and also as RTF. Opening the IDML retained the task.

  Placing the RTF into one new file has also retained the task; even if the fonts were all gone, the glyphs appeared in applied fonts. A strange thing is that the police of DickChamberlainsDeathF na not show coloring and missing fonts in the menu drop-down police in Control Panel, there is no brackets around his name (parentheses indicate missing fonts).

  Someone at - he a clue about this strangeness?

  I exported the text file. The form disappeared when the text file has been placed in a new document.

  Then, I reapplied the fonts for the text - named police has been applied to all paragraphs in the police force. No character.

  The default size is 12pt. I've selected all the text in the frame and increased the font size to 15pt and BINGO! It's BAAACK! He remained as I unstapled each action step by step.

  I suspect that the task is triggered by a character in one of the fonts. It does not go away when the fonts are changed to fonts known to normal. If these fonts are not major fonts foundries creations, or if they have been changed by a scientist crazy fonts, the problem is probably a calculation error in the view of the police.

  If you want to really find the source of the problem, I would suggest to start with a new file, set the default to a known a type font, course new samples of text for a set of glyphs, copy and paste the glyph to make enough for your samples, and then save this file, and then save it under a new name. One, apply a suspicious police to a set of glyphs. Save under a new name that indicates the applied font.

  Open the first saved file, save it with the name of the second font that you want to test. Apply this font on the second set of glyphs. Save again.

  Browse through this routine until you have a set of files which have all games of glyphs, but that one policy applied to each file. If the task has not appeared, start back in the first file with a font applied. Select the text with the applied font and change the size from 15pt point. If that does not cause the problem, save the file as a new file with 15pt in name.

  Repeat this test for all files. If the task appears, you will have an idea of what font causes.

  If the task has not appeared, start over with the first file who first applied at 15 PT fonts, save it under a new name. Select the second group of glyphs and apply the second font. Record. If no stain, increase the font size of the second group of glyphs to 15pt. If no spot, save and repeat with all other files, apply the n - th police to the n-th glyph group. Save new names. Change font at 15 PT etc.

  If still no spot, start over with the first file. Register a new name. Apply every nth font in each group of the n - th glyph, in this one file. If this does not display imperfections, try the same strategy with the remaining files.

  HTH

  Kind regards

  Peter

  _______________________

  Peter gold

  Know-how ProServices

• Extract data from files of the NRF

  Hello!

  So, I'm working on a project where I have files of data that are written on 12 channels in a .nrf file.  As the NRF seems to be a pretty unique file format I don't come with a better than DIAdem Software for open data.  I'm looking for a way to take data from each of the channels and enter the values programmatically every x number of data points.  I use Visual Studio, written in c#, using the Library COM DIAdem.

  At this point I wrote a very basic program that uses CmdExecuteSync ("DataFileImport (" "+ file.)") FillName + "')"); to import the .nrf file in DIAdem, but from there, I'm lost.  I tried to export the data using the DataFileSaveSel function, but unfortunately the CSV output ends up being almost a gigabyte in size, which is too big for my needs.  I hope there is a way to perform the operation, that I need in tiara and if so someone could help get me pointed in the right direction.

  Thank you very much in advance for any help.

  Hi Kub,

  I recommend you use the loading capacity reduced by tiara, like this:

  n = 10
  SectionBegin = 1
  
  SectionEnd = 1000
  
  Call DataDelAll
  
  Call DataFileLoadRed (FileDlgName, "", "", "IntervalWidth", N, 1, SectionBegin, SectionEnd)

  This will load every nth value from value 1 to the value 1000.

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments