Selectively underline character to the Boolean text

Similar Questions

• How to create a custom control for a button where the look apply to everyone else but not the Boolean text?

  Hi all

  I would like to create a button custom as a master, so that if I change the look of the master all other buttons are changed.

  I did it with a custom control, such as a 'type strict def' otherwise the look will change , BUT if I do this as a strict type def I can't change the Boolean text more which should be different on each button.

  How to create a master control of a button where the look apply to everyone else but not the Boolean text?

  Steve Chandler wrote:

  I don't think that you can do. I just looked and as I suspected the Boolean property text is read only for strict typedefs, you cannot use the nodes property to change the text.

  As a just solution make it a typedef. When you want to change the open look the typedef and strict rendering, make your changes, then make no strict again. You will need to update the text Boolean yet once for all instances. Kind of pain. This is perhaps something for the exchange of ideas.

  Alternatively, remove Boolean text and replace with legend

• Selection of group and the radio text box

  I have a form with a question like: "How did you who are we?" and a radio with some choice group. One of the radio group choice is "other - please describe! When selected, a text box changes to 'read only' and the user can write something. I'm not able to update a record with the user's selection in a field in a table (I can save either text or radio group selection area). Any help? Thank you!

  You should check the value of the selected option button. If it's not ' I have this answer: ", assign the value to $_POST ['Proposal_text'].

  If ((isset($_POST["MM_update"])) & ($_POST ["MM_update"] == "form1")) {}

  If ($_POST ['proposal']! = ' I have this answer: "") {}

  $_POST ['Proposal_text'] = $_POST ['proposal'];

  }

  
  

  $updateSQL = sprintf ("UPDATE sarcini SET solutie_6 = %s, introd_6 = %s WHERE id_question = %s",

  GetSQLValueString ($_POST ['Proposal_text'], "text").

  GetSQLValueString ($_POST ["'Full_name"], "text").

  GetSQLValueString ($_POST ['id_question'], "int"));

• Boolean text disappeared after the creation of the exe

  Hello!!!

  Deploy an exe of a National Instruments touch panel touch panel. The exe contains a value Boolean LED indicator which is supposed to is set to display the Boolean text (multiple string function is also checked). However this function does not work it means that boolean works properly but no text is visible. If anyone can help with this?

  Thanks in advance

  Good morning thorfano,

  I happened to notice that none of your Boolean texts are on the indicator, while mine are.  If you move your boolean text on the indicator or simply right click the indicator and choose "Text" lock at the Center, you should be able to review your text.

  A variant of this bug has been reported to R &D; I am trying to add this specific case to our documentation.  I apologize for any inconvenience this issue may cause you and hope that the solution to moving your boolean text is acceptable.

• Boolean text in table

  Hello

  I wonder if there is a much easier way to do it.  Basically I have a few Boolean checkboxes associated frequencies.  If the user wants to test the frequency, then they can check box.  I need to take these frequencies and put them in a table.  The example I show has only 3 frequencies.  However, the real program a lot more.  Y at - it a faster way to get the Boolean text label in order to convert the label in a frequency table.

  Thank you.

  Put only the frequency selected in the table, you can do as in the VI attached.

  Ben

• How to select a part of the message under macOS Sierra?

  In previous versions of Mac OS x, I was able to select a part of the message (text / iMessage) in the Messages application. Now, if I try to do the same, Tapback is enabled. It's really annoying, as I often have to copy the entire message body, paste into an editor and then to do the editing.

  Which should not happen if you simply select the text of the message by double-clicking or click-and - drag. That action works the same way it always has.

  Tapback happen if you press and hold - in other words, if do not quickly move the cursor.

  If you are still unable to work, please review your Trackpad preferences. Maybe change a setting arbitrary will correct what you are experiencing. Check accessibility > mouse and Trackpad in the same way: change a setting to determine if what it fixes.

• invisible special character in the column of table all_source-text

  Hi all

  Query:

  SELECT P.TEXT, S.TEXT, P.LINE, S.LINE, LENGTH (P.TEXT), LENGTH (S.TEXT), LENGTH (REPLACE (P.TEXT,' ', ")), LENGTH (REPLACE (S.TEXT,' ',"))

  All_source p, all_source@LINK_TST. S WORLD

  WHERE p.TYPE = 'FUNCTION '.

  AND p.owner = 'ASAP '.

  AND P.OWNER = S.OWNER AND P.TYPE = S.TYPE AND P.LINE = S.LINE AND

  P.NAME = S.NAME AND

  AND LENGTH (TRIM (P.TEXT)) <>LENGTH (TRIM (S.TEXT));

  Clarification:

  This query returns the line offset accordingly.

  1 line of a function is driven on the request, seeing that the two text values are similar.

  1 TRIM feature works TRIM (text) <>TRIM (text)

  2.length (Trim (P.Text)) <>LENGTH (TRIM (S.TEXT));

  3. used function REPLACE not working LENGTH (replace (P.TEXT, ' ')) <>LENGTH (replace (S.TEXT,' '));

  I checked that a function a invisible extra character in the column of text which the query should return an incorrect value.

  How to exclude the invisible character in the query?

  Thank you

  Fabrice

  You see invisible characters

  Maybe...

  REGEXP_REPLACE (text, "[^ [: print:]]'")

• [JS] CS6-&gt; how to insert character at the first location of text style range

  Hello

  I have a string of text that has a block of text, anchored in the first character position of a range of text Style.

  The I normally updated text is to insert text around the ankles and that works, but I can't seem to make it work if the anchor is located at the first character.

  Example, where [a] represents the location of the anchored object (the special character):

  [a] my text

  new text:

  Under the pretext of [a] my updated text

  If this is not possible, then it is possible to move the anchor point?

  Any ideas? Thank you

  Hello

  Because you selected the frame, you can try to feed the fist PointInsertion content:

  App.Selection [0] .insertionPoints [0] = .silence 'before the anchor. "

  HTH,

  Loïc

• How to determine the Boolean value selected in a mouse down event pane?

  I have a lot of Boolean controls and indicators in my VI and I would determine what boolean is selected (left click) on a mouse down event pane.  Can I do this without having to specify each of the Boolean in the case of event configuration?

  Thank you.

  Jim

  If you get a ref to your Boolean all they have properties that define it location and size. Compare the location click with the limits of each boolean and where

  Left< click=""><>

  AND

  Back to top< click=""><>

  you have found the Boolean value that ended the click.

  It may be easier to use the Boolean refs table to create a dynamic event and then use the ref returned by the mouse down to get the label of the Boolean value that has been clicked.

  Have fun

  Ben

• Rotate the text with the character within the text block style

  I would like to apply a paragraph or character style to a certain character in a text frame. I would need to rotate 90 degrees in the framework, separate from the other text. Is this possible?

  Insert the text block in the block of text as an anchor and rotation you need.

• By creating a form that has several text boxes to a single character on the same line, how can I get the cursor to go in the next text box automatically after inserting a character?

  By creating a form that has several text boxes to a single character on the same line, how can I get the cursor to go in the next text box automatically after inserting a character?

  Create a text field and use the option 'comb n characters.

• You can move the inserted text to a different location on the picture, if yes how?  How can I put the character and the Panel clause up in the photo shop when you type test?

  You can move the inserted text to a different location on the picture, if yes how?  How can I put the character and the Panel clause up in the photo shop when you type test?

  Yes.  I find it easier to type text, and then use the move tool (shortcut V) (looks like an arrow) to place it where you want.

  To bring up the character and paragraph panels go to WINDOW > CHARACTER or WINDOW > PARAGRAPH.

  I hope this helps.

• Insert a special character at the beginning of each page in the body of the text running?

  Hi all

  How can I go about writing a script that can insert a character (the same character) on each page of a document (say a book) in the body of text running?

  It would be different from a head of the race or the page number. A single character at the beginning of each page!

  Thank you

  Sorry, Jarek and thanks for pointing out the error...

  for (p = 0; p

  {

  app.activeDocument.pages [f] .textFrames [0] .lines [0] .insertionPoints [0] .silence = "Book";

  }

  Vandy

• I worked on a banner for my website.  I have my background layer, my image photo layer and I try to make my text layer.  I'm haven been able to do this all morning.  Now when I select horizontal T, place the cursor and type... I get only one

  I am designing a banner for my website.  I have a background layer, a layer of photo image and I try to create my text layer.  I select horizontal T, place the cursor in the desired position and type.  I get a horizontal line... no letters.  Can someone tell me what is the problem and how to solve this problem, so I can't see letters?  Thank you!

  Right now, your question is marked as "not responded". If my or anyone's answer solved your issue. Mark your question as answered and mark the answer displayed as 'correct', only you can do. It helps when the moderators of the forums of audit.

• ADF Skinning - change the Boolean select box image

  Hi guys. Can someone help me? -I am try to my skin ADF application, and is one of the steps that I intend to change the Boolean select box image by using the skin. Is this possible? I use JDev 11.1.1.6 (and can not improve it until due 11.1.2.x our runtimes is 11.1.1.6) and skin with project in 11.1.1.5 11.1.2 editor format
  
  My file of trinidad - s skins.xml:
  

  <?xml version="1.0" encoding="windows-1251"?>
  <skins xmlns="http://myfaces.apache.org/trinidad/skin">
    <skin>
      <id>AMPSkin.desktop</id>
      <family>AMPSkin</family>
      <extends>fusionFx-v1.1.desktop</extends>
      <render-kit-id>org.apache.myfaces.trinidad.desktop</render-kit-id>
      <style-sheet-name>skins/AMPSkin/AMPSkin.css</style-sheet-name>
      <bundle-name>resources.skinBundle</bundle-name>
    </skin>
  </skins>

  I'm trying to add inside the AMPSking.css next file strings (the images are copied to the project):
  

  af|selectBooleanCheckbox.powerButtonCheckbox af|selectBooleanCheckbox::unselected-icon
  {
    content: url("images/af_selectBooleanCheckbox/icoPowerOffGrey16d.png"); 
  }
  af|selectBooleanCheckbox.powerButtonCheckbox af|selectBooleanCheckbox::selected-icon
  {
    content: url("images/af_selectBooleanCheckbox/icoPowerOn16r.png"); 
  }

  - but nothing happens: image box does not change. I have not marked questions to window status for the .css file and in the window properties of selectors nothing are marked as incorrect. Image files are also presented in the file system - both are .png files 16 x 16 pixels, size about 3K each.
  
  Thanks for any help...
  
  Published by: obereziuk on 08.08.2012 09:52

  Hello

  The icons you (selected and unselected) would apply to immutable SBCs.

  Check out the demo of counting

  http://jdevadf.Oracle.com/ADF-iPad/faces/components/skinningKeys/selectBooleanCheckbox.JSPX

  Arun-