selectoneradio gets not selected while filtering in grid...

Similar Questions

• the desktop icons getting not selected & right click of the mouse does not

  When I start the system everything is normal but after completing the office do not get selected items either through the mouse or the touchpad and even click right does not work. Search Advisor.

  Hi Kishore Peddi,

  You did changes to the computer before the show?

  Method 1
  I suggest you to run the fixit from the following link:

  Difficulty of broken desktop shortcuts and common system maintenance tasks
  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us
  
  Method 2
  Step 1: I suggest to start the computer in safe mode and check if the problem persists.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2: I suggest you perform the clean boot and remove the program that is causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: Follow step 7 clean boot KB929135 article to reset the computer in normal mode.

• Get the selected row of grid

  Hello
  
  I use JDev 11.1 with ADF, I have the grid, I need to get the selected row in the grid when I press the button, how can I do this?
  
  Thank you

  Hello

  You have a table in your page that is based on a viewObject iterator and you must get the selected line in your bean to support when you click on a button.
  Did I get that right?

  If yes then you must add an actionListener on this button that executes a method in bean support.

  the code for the button:

  In this method, you add the code like this:

    public void buttonActionListener(ActionEvent actionEvent) {
      BindingContext bindingctx=BindingContext.getCurrent();
      DCBindingContainer bindings=(DCBindingContainer)bindingctx;
      DCIteratorBinding iter= bindings.findIteratorBinding("iteratorName");
      Row currentRow=iter.getCurrentRow();
    }
  

  If this isn't what you need to give more details.

  Gabriel

• my mac book does not light and I get three beeps while it tries to start

  my mac book does not light and I get three beeps while it tries to start

  Three beeps is almost always a problem of memory RAM.

• get the index of the item selected in the image grid

  Hello

  use the latest version of bbui.js and I am facing a problem in getting the selected item (but click or press event) to image grid.

  given that all images have the same class name and bb-type of data and the only difference between them is data-bb-img I need to shoot an event handler when you select a specific grid image and passing the argument index...

  can someone help me please?

  function jQuery Event.Target solved the problem! Thank you

• We get an error ' ' operating system not found "while tyring to windows 7 boot

  * Original title: only F11 can start

  I installed Windows 7 from a USB on a new ssd using F11. Now I can only access Windows by pressing F11 at startup upward. Otherwise, I get "Not found operating system". I have a Vaio S.

  Hello

  This problem may occur if one or more of the following conditions are met:

  (a) basic input/output system (BIOS) does not detect the hard drive.

  (b) the hard disk is damaged.

  (c) sector 0 of the physical disk has an incorrect or malformed master boot (MBR) record.

  Note: Some third-party programs or alteration of the disk can damage an MBR.

  (d) an incompatible partition is marked as Active.

  (e) a partition which contains the MBR is no longer active.

   

   

  Method 1:

  I suggest that you update the basic input/output system (BIOS) to the last version by contacting the motherboard or computer manufacturer, and the Coachman.

  Important: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  BIOS: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/BIOS-frequently-asked-questions

   

  Method 2: Please follow the steps in the following article and check.

   

  Error: the OS not found or lack of operating system.

  http://www.KB.Sony.com/selfservice/microsites/search.do?cmd=displayKC&docTypeID=DT_KNOWLEDGEARTICLES_1_1&docType=kc&externalId=C1001886

  For more information, see the link:

  What are the system recovery options in Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

   

  If the problem persists, I suggest you to contact the Sony Support for assistance.

  http://eSupport.Sony.com/us/Perl/select-System.pl?Director=contact

  Let us know if it helps!

• Exception while trying to get the selected value for the choice of SelectOne in ADF Mobile

  I added the following code after arriving through this post https://forums.oracle.com/thread/2536419

  DCBindingContainer dcBindings = (DCBindingContainer) BindingContext.getCurrent () .getCurrentBindingsEntry ();

  DCIteratorBinding iterBind = (DCIteratorBinding) dcBindings.get ("facilitySelectItems");

  Attribute String = (String) iterBind.getCurrentRow () .getAttribute (0);

  But Jdeveloper complained class BindingContext wasn't available and I get the jar file adfm.jar has not been added to the project. I added it manually the path C:\JDeveloper11r24\oracle_common\modules\oracle.adf.model_11.1.1\adfm.jar. Once I've deployed code on an android emulator, I get the below error. Can someone please?

  07-25 13:18:03.812: D/CordovaLog (869): [SEVERE - oracle.adfmf.framework - adf.mf.internal - logError] request: {classname: oracle.adfmf.framework.api.Model; method: evaluateMethodExpression; params: [0: #{pageFlowScope.IBCMSearchBean.getSearchParams}] [1:] [2: {}] [3:] ;} exception: {message: oracle/adf/model/binding/DCBindingContainer (unsupported major.minor version 50.0); the severity: ERROR; .Guy: oracle.adfmf.framework.exception.AdfException; .exception: true ;}}}

  The version of the compiler maximum the JDev shows that 1.4. And I'm using version 11.1.2.4.0 for JDeveloper. The JDK version is 1.6.0_24.

  Sorry I missed the question!

  First of all, to get the value of selectedItem in selectOneChoice do not have another function in the domain controller. Here is an excellent article by Frank that explains this. Or you can use the below function to get the selected value immediately. Here the market is the value of selectOneChoice attribute. I wasn't aware of this method until you have read this article.

  {} public void getAndSetMarketValue (market of the object)

  ValueExpression ve = (ValueExpression) AdfmfJavaUtilities.getValueExpression ("#{bindings.marketSelectItems}", Object.class);

  AmxAttributeBinding attrBinding = (AmxAttributeBinding) ve.getValue (AdfmfJavaUtilities.getAdfELContext ());

  access the iterator that populates the list of values in

  the selectManyChoice component

  AmxIteratorBinding amxListIterator = attrBinding.getIteratorBinding ();

  the AmxIteratorBinding is a wrapper for the BasicIterator

  iterator which sets out the information we need

  ListIterator BasicIterator = amxListIterator.getIterator ();

  for each index value, query the name of the service (you can

  access and attribute from the line) to display

  SelectedValue = string

  (String) listIterator.getAttributeValueAtIndex (((New Integer ((String) market))) .intValue (), "Value");

  }

  Second, you can use #{row} in commandLink's action since it is something that is evaluated when the user clicks on the link and we do not have access to #{line} after that the entire component is rendered. To remedy this give an action for the commandlink which is a function in the bean and the function of bean back to the action of the link selected.

  ListOfReports.amx

  .......

  .......

  LoginBean.java

  ......

  public String returnClickValue() {}

  Option of string = AdfmfJavaUtilities.evaluateELExpression("#{viewScope.selectedItem}").toString ();

  return option;

  }

  ......

• I get a message that my real time is not selected. I press 'Activate' and it stills is not correct the problem.

  Essentials microsoft security on my toolbar is shown in red. When I open it, it tells me that my real time is not selected and that I should turn it on. I press turn on button but it still does not correct this situation.  However, he told me that I am protected.  I've updated everything and I also ran a full scan but still does not help.

  Hi jomarie285,

  Uninstall and reinstall a new copy.

  Microsoft Security Essentials.

  http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download

• Some photos are not selected when I try to import ("do not import possible double images" is turned OFF!)

  Some photos are not selected when I try to import. I used Lightroom 5 since it launched and do not have this problem until a month ago (select: "do not import possible double images" is turned OFF!). I really have to control my import in the opposite case, it miss a few images, but don't know what to do when the picture is not selected. How can I import the correctly without making stuff and that's why spoil my archive carefully planned? My archive is too packed and I have double numbers ore something? What I need Lightroom 6?

  Thank you very much for your help!

  Best regards, Enith

  "Photos are indeed grey, but the imported photos are new assignments, so this:" ","then it means that you have previously imported photos in Lightroom, and so it is not necessary to import them again ', is not the case.

  While you are probably right, if the photos were just captured, the problem is that Lightroom think that these are the same pictures that were previously imported, and so until you can determine why Lightroom think that you won't progress.

  You need search for any of these photos in your Lightroom Catalog. Follow these 4 steps in order

  1. In the catalog Panel on the left side of the library Module, click all photographs
  2. Develop all batteries (picture-> stacking-> develop all batteries)
  3. Disable all filters (once or twice Ctrl-L)
  4. Search for one of these photos by file name

• Not selectable DataGrid row when using the custom itemRenderer

  I placed created an itemRenderer customized for use in a DataGrid in Flex 3.2, however, when I click in the cell in the grid using this itemRenderer, the line is not selected. (the DataGrid.selectable property is set to true).  Abolition of the use of the converter back the expected features. Here is my renderer object, is there any reason why I should expect this behaviour?  I have other itemRenderers not causing this, but their anatomy is the same... nothing manifestly different about them.

  Thank you

  Muaddib

  <? XML version = "1.0" encoding = "utf-8"? >
  " < = xmlns:mx mx:HBox ' http://www.Adobe.com/2006/MXML "
  Width = '100% '.
  horizontalAlign = "center" >
  < mx:Script >
  <! [CDATA]
  public private static var millisInSec:int = 1000;
  public private static var millisInMin:int = 60 * millisInSec;
  public private static var millisInHour:int = 60 * millisInMin;
  public private static var millisInDays:int = 24 * millisInHour;
  public private static var unknownMsg:String = "UNKNOWN";
  
  public var _data: Data;
  private var _valueUpdated:Boolean = false;

  private void getFriendlyFormat(millis:Number):String {}

  ...

  formattedString return;
  }
  
  override public function set data(value:Object):void {}
  if(null == value)
  return;

  var newData: Data = value in the form of data;
  If (newData! = _data) {}
  _data = newData;
  _valueUpdated = true;
  }
  }
  
  override protected function commitProperties (): void {}
  {if (_valueUpdated)}
  var finalDate:Date = new Date();
  Update 'timeLabel"according to on_data
  _valueUpdated = false;
  }
  }
  []] >
  < / mx:Script >
  < mx:Label id = "timeLabel" / >
  < / mx:HBox >

  If you are not ' going to call super.data = value, you should probably have a get

  According to the data

• Make the midi recording when the track is not selected

  Hi, asking for my friend and will try and find a solution when I get home, but...

  My friend (using logic 9.1.8) made some record with about 12 actors/singers alive. I suggested to him that he must save the midi for keyboard player (who is also the composer of all parts) as well as the audio just to give them some flexibility later. It is a great keyboard player and uses its own external keyboard. (i.e. not logic instrument). All the other singers/actors are all audio.

  So it is easy to implement but as such sessions can become a little hectic and although the midi for keyboard track is in record mode, the midi does not record unless the track is selected on the left. Sometimes, in the madness of him the entire midi track remains not selected and if the midi data does not get saved. Is it possible to routing in the environment where the midi will get recorded although the midi track is not selected? Don't forget, the midi track is always made armed.

  Thank you very much

  Looks like you entered only followed for the targeted track has allowed...

  This picture isn't in X 9 - but it's the same setting...

  Make sure that this is not the case-

  

• the menu items have _1 add to get a selection of used Menu

  I read in the text of a spreadsheet file and I create menu items to aid insertion of Menu items.  The menu looks very good.  I click on the menu and I can't see the following:

  My Menu

  Section A

  Item B

  Point C

  I use get a selection of menus to see one that the user has selected.  When the user selects the element B the element tag of me returned by get a selection of Menu says "Point B_1" the same for the other choices.

  I've been using get a Menu selection for a long time without problem.  The only difference here is that some of the items in my Menu also appear in my Menu others.  Is it possible that the element tags must be unique on all menus? And if so, how do I get around this?

  David Lieberman says:

  Is it possible that the element tags must be unique on all menus?

  Yes. This is specified using LabVIEW.

  And if so, how do I get around this?

  You can not. They must be unique. You can always set the tags yourself. As long as they are unique.

• I get this error while turning on the firewall manually ": {26EE0668-A00A-44D7-9371-BEB064C98683}\3\::{4026492F-2F69-46B8-B9BF-5654FCO7E423}" "."

  I get this error while turning on the firewall manually

  Here are a few steps to try troubleshooting:
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  http://Windows.Microsoft.com/en-us/Windows7/cant-connect-to-a-network

  If those who do not work, let us know exactly what is happening and when.
  B Eddie

• Get «not responding error»

  I get not responding error

  What is the processor and RAM how much your computer have? Make a right-click on the icon my computer on your desktop and select properties for this information.

  Try Ctrl + Alt + Delete, select Task Manager, and then click the performance tab. Under Commit Charge, which is the Total, limit, and the pic?

  I'd be interested to see a report of Disk Defragmenter. Open Disk Defragmenter and click analysis. Select view report, and then click Save as and save. Now find VolumeC.txt in your My Documents folder. Open the file, and place the cursor anywhere in the file, select Edition, select all to select all the text and copy and paste into the body of your message. To do this, before you run Disk Defragmenter because it is more informative.

  Select Start, run, type cmd and press ENTER. Type "chkdsk c: /f /r" without the quotes and press ENTER. Make sure you include the spaces indicated. Enter Y when asked if you want to run chkdsk on restart the computer. Quit and then restart the computer.

  Marking bad sectors on a hard disk takes time so be patient. Delimiting does not repair a defective sector. He places pointers to the reader by saying the system not to read or write to these areas that have been damaged.

  If the number of defective sectors continued to increase after using the procedure above several times, then you should replace the disk. If an important system file is written to a bad sector, you can corrupt the registry hives and lose the entire contents of the disc.

  However if have run chkdsk you not see more new bad sectors, then the reader can work for you for years.

• Windows mail. When sending a new email, I want to use the BCC field, that I can not select because it is not on the new Message. __How make CCB to come when I create a new message? This something __Is I can add tools please?

  Windows mail. When sending a new email, I want to use the BCC field, that I can not select because it is not on the new Message.
  How can I get the future BCC when I create a new message?
  Can I add tools please?

  Thanks for the reply Bruce Hagen. I am very grateful.

  Dave.

  In a new message window: view | All the headers. Check it out. Or, simply click on the button to easily add to your contacts list to: To, CC, or BCC.

  Bruce Hagen ~ MS - MVP [Mail]