Similar Questions

• Double TIS, a VPN works, and the other routes not

  I have an ASA5505 and having everything-Connect configuration so that I can use my iPhone or iPad and get my internal IP of Cisco VC240 cameras as well as other devices on my network, but they are the main reason that I have configure the VPN.  It works like a champ and I don't have to change the settings of the iPhone/iPad app when I'm in the office or outside the office.

  I've added since an additional service provider because of certain other services on my network.  I use the ASA track feature to follow the road to an access provider and if it fails, the other ISP resumes the connection.  I copied the orders for the 1st access provider, changed the names to the second ISP and placed orders in the SAA.  I can now connect through any connection or another ISP on the iPhone/iPad.  If I connect to my ISP later, I am connected but the ASA does not traffic to me.  My stats on the iPhone shows data sent, but no receipt.  I can not ping any device, to access my camera, etc.  But when I connect to another ISP, it works fine.

  I didn't know if that's even possible with the ASA but assumed that it would be like most everything works, so it seems miss me probably a small order and it would work on either.

  Anyone know if this is possible?  And if so, any idea what could cause one to work and the other does not work?

  Hello Todd,

  What about this entry:

  NAT (inside, evertek) static local-network local-network destination source static Anyconnect client Anyconnect client

  Running from sh I see that he is not exempt from nat.

  Best regards

  Eugene

• Cannot receive emails through my Outlook Express 6 account all of a sudden. I have 2 computers set up with it, a Windows XP and the other Windows Vista.

  Cannot receive emails through my Outlook Express 6 account all of a sudden.  I can send messages but not receive. I removed all mail rules and blocked senders and I still cannot receive anything.  I tested it by sending a mail to it through different accounts (gmail, yahoo) so I know that there must be some messages.  I also had people reply to my email that I send to what they do, but I don't get their answers.  I have 2 computers in place, using Windows XP and the other is Windows Vista.  I've never had a problem until now. Any help?

  My server contacted me and told me to check my spam using their webmail account, because it was full.  It seems that when I used the rules of the mail I had clicked on delete from the server, just "do not download".  My spam folder was so full that I couldn't receive. Thanks for all your advice!  Mark as resolved.

• Hi, I have a problem with a basic movement scroll effect.  I've already looked and read every tutorial out there about it and even tried the cat to adobe support, but the guy at the other end of the line disconnected me..., he probably didn't unde

  Hi, I have a problem with a basic movement scroll effect.

  I've already looked and read every tutorial out there about it and even tried the cat to adobe support, but the guy at the other end of the line disconnected me..., probably he did not understand what I wanted him, because English is not my native language, so one will try to be very clear on this one...

  Please note that I am new to dream, this is my first project ever.

  My idea is as follows:

  When the customer comes to our site of companies, he sees just our logo on a white background. the logo is composed of, say, four elements. When the client makes a scrolling down, the logo begins to transport: first the first part of the logo flies on the left side of the site, then the second part of the logo disappears down, then the third part of the logo flies to the right, then the fourth part of the logo flies upward and out of sight of customers. given what I've seen, it is possible to do...

  so...

  now I have four parts of my logo imported as png files in muse and was assembled in design mode to build our companies logo. I select each of the four parts and go to the effects of scrolling to the left tab next to the tab layers first I get the same values for each of the four parts: first movement: x 0 and x 0 again for the movement of the left and right; key position (t-handle): 0px; final movement: x 0 and x 0 for the value of left and right.

  now, I hit "Preview". : the logo is "pinned" to the correct location, I can scroll but the logo stays where it is. So far so good...

  now, I select all four components again and go to the tab scroll to 'final motion' effecs, I click on the drop down arrow and enter 1 x. I struck an excerpt...

  When I scroll the WHOLE grave logo down... well.

  NOW, I want the first part of the logo down, THEN part II to move left, THEN the third part to go to the top, THEN the fourth part to go right.

  so I select ONLY the first part, go to the request of scroll, to the 'final movement' tab, I click on the left arrow, then I go 1 x. (the value of up-down, I put to 0 again)... I struck an excerpt...

  the first part of the logo is left as soon as I start to scroll, the other three parties still go down at the same time...

  NOW, I want the second part of the logo to start to move, when the first part left, not at the same time as the first part.

  THEN I SELECT THE SECOND PART AND DRAG ITS HANDLE IN T (KEY ITEM) DOWN, LETS SAY: 200PX. THEN IT STARTS TO MOVE ONLY AFTER THE CUSTOMER HAS REACHED THIS POINT, RIGHT?

  BUT WHEN I SAW THAT *, THE LOGO IS NO LONGER TOGETHER, THE SECOND PART IS FLOATING ANYWHERE, BUT WHERE IT SHOULD BE... WTFF?

  short: when I move the t-handle, the initial position of the object changes. That's what I said to the adobe employee, but he said, this is the expected behavior...

  But if that's the case, how can I have my four parts correctly together, so they form my logo, but with different t treats, so they all start to move at different times?

  Pleeease help me, I will die of frustration here...: () this behavior is not normal, right?

  Thank you very much to everyone who reads this message and tries to help him...

  All the best,

  Niki Lapan

  I'm not good at explaining things that im going to download the file, I did for you. hope this helps you solve your problem

  https://www.mediafire.com/?xiild0yhr5cna7s

• Why Apple can't do two systems? First of all, we are protected, and the other is free just like android, but in the style of the iOS and Apple needs a request so we can manage and see new products from an application and do not go on this site!

  Why Apple can't do two systems? First of all, we are protected, and the other is free just like android, but in the style of the iOS and Apple needs a request so we can manage and see new products from an application and do not go on this site!

  and I don't know that if Apple make a system more freely, there no need for any device on Earth but iPhone.

  http://www.Apple.com/feedback/

• I have an iphone 6 times and after the installation of new iOS 9.3 when I receive or make a call the person on the other end cannot hear me but I can hear them.  If I change speaker and then they are able to hear me.  Any help?

  I have an iPhone 6 plus and have upgraded to the new iOS 9.3 but now when you receive or calls the other person on the other end can't hear me. The only way to make this work is to allow the speaker.

  I power off, the hard reset, and this problem still exists.

  Can anyone help?

  Test your low microphone by going on record and taking a test recording.

  (When you put it on the loudspeaker, he uses the microphone before located next to the cylinder head box.)

• When I try to make a video call via Skype. I can see and hear the people on the other end, but they cannot hear me.

  I just got a new laptop with the latest softwear Microsoft and McAfee. Everything works fine EXCEPT when I try to make a video call via Skype. I can see and hear the people on the other end, but they cannot hear me.  The microphone settings seem to be OK.  the antivirus that was installed would cause the problem?  I tried to ask Skype. but do not seem to be able to communicate with them...

  The following support Skype may have something that will help: http://support.skype.com/en-us/category/CALL_QUALITY/

• Hi I would like th different creative cloud buy 2, only photoshop/lightroom one and the other with all pack.is it is possible because I saw that we can only install on 2 different computers at the same time

  Hi I would like th different creative cloud buy 2, only photoshop/lightroom one and the other with all pack.is it is possible because I saw that we can only install on 2 different computers at the same time

  Creative desktop cloud applications can be downloaded and installed on multiple computers, regardless of the operating system. However, the activation is limited to two machines per individual related to the composition, and you may not use the software on these devices simultaneously.

  You can also see:

  FAQ: Can I install Creative Cloud on several computers?

  You can either sign of Creative cloud on a computer to connect to another, or as you said, buy a membership second using an AdobeID different so that you can leave, signed at on 4 computers.

• Hello I have PC and pay monthly. We are a small company. Question 1: For two years I have a full subscription to Adobe all programs. But the other day I would open an another user InDesign documents and could not open this with the error message: the

  Hello

  I have PC and pay monthly. We are a small company.

  Question 1: For two years I have a full subscription to Adobe all programs. But the other day I would open an another user InDesign documents and could not open this with the error message: "the document is done a new version than my version of InDesign. How should I do to upgrade my version to a version more recent?

  Question 2: I already have a license to use the software on two computers. Am I not allowed to use the same version I've taken down on adobe.com til two computers or terms here.

  Sincerely

  Stefan Svensson

  Hello

  Please see update requests in your desktop CC application.

  CC Adobe license can be activated on 2 machines using the same Adobe ID, but only one at a time.

  Reference: licenses and terms of use | Adobe

  Kind regards

  Sheena

• HI, I can buy an extra App and that it is used by 2 different people on 1 account at once? The apps are PS en ID. So the first person will use ID all day and the other uses ID all day?

  HI, I can buy an extra App and that it is used by 2 different people on 1 account at once? The apps are PS en ID. So the first person will use ID all day and the other uses ID all day? and this account a 1

  Hello

  Please see licenses and terms of use | Adobe

  License Adobe CC can be activated on 2 machines using the same Adobe ID, but can be used alone at the same time.

  Kind regards

  Sheena

• I have 2 MacBook Pro, we are years and the other is 8 years old, I got photoshop cs2 on the former. After cleaning the disc hard I couldn't load the cs 2 on any of my laptops. Can I purchase an upgrade for it? I have all the DVDs, serial number and pack

  I have 2 MacBook Pro, we are years and the other is 8 years old, I got photoshop cs2 on the former. After cleaning the disc hard I couldn't load the cs 2 on any of my laptops. Can I purchase an upgrade for it? I have all the DVD, the serial number and packages, but I can't use it.

  Pricing plans and creative Cloud membership | Adobe Creative Cloud

• Media Center Question can I have set up as a server and the other two as clients, each using two of the tuners of the card?

  I have 3 computers running Windows 7 Professional, one of them has a four installed tuner DVB - s2 card. I want to configure it as a server and the other two as clients, each using two of the tuners of the card. I understand the media library is able to use the basic network TV tuning cards, so there must be some way for me to configure the server to send the information over the network.

  Any ideas?

  On Fri, September 19, 2014 12:28:56 + 0000, SamJ008 wrote:
   
  > I have 3 computers running Windows 7 Professional, one of them has a four installed tuner DVB - s2 card. I want to configure it as a server and the other two as clients, each using two of the tuners of the card. I understand the media library is able to use the basic network TV tuning cards, so there must be some way for me to configure the server to send the information over the network.
  >>
  >>
  >>
  > Any ideas
   
   
  Start reading here
  http://TheDigitalLifestyle.com/w/index.php/2010/01/29/why-all-the-excitement-over-network-tuners/
   
  You will not be able to use your existing tuners like tuner network. Microsoft has
  arrested development of Media Center, so don't expect any new hardware/software to
  appear.
   
   
   
  __________________________________________________________________________________________________
  Barb
  MVP Windows Entertainment and connected home
  My Blog - http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   

• Why one of our identities have only 3 folders (Inbox, sent, trash) and the other a whole lot more?

  We have two identities/addresses. Mine has like 9 folders (Inbox, sent, trash, all mail, spam, important, Star) and the other 3 just (Inbox, sent, trash). We had a guy put this email (Thunderbird) in the computer client. There is no do. So, why this difference? One of these important extras (sorry), or others Miss?

  Well, yours is a gmail IMAP account. (All mail is a give) the other account is probably a pop account to your Internet service provider. That is why only a couple of the local folders.

  See here for some basic details about IMAP and pop https://support.mozilla.org/en-US/KB/glossary-Terms-including-types-Accounts#w_mail-Accounts

• Firefox open two copies of each time, one with my tabs and the other without, and if I close one, both close.

  Since a few days ago, whenever I open Firefox it opens two copies. Got my tabs from the previous session and the other only my home page. If I close is exemplary, the other closes as well. How can I get rid of the second copy?

  I am running version 27.0.1 in Windows 7 on a 64-bit operating system.

  Tried to delete the attributes read-only files that the above suggested. There is no additional file numbered as he said, there might be, however. Doesn't seem to help until I closed the second copy with the ability to close all tabs. This simple action closed just a single copy and left me with one that I still wanted to open. I closed and reopened, and always gave me one copy, so I guess it's all fixed.

  Thanks to those who tried to help!

• If I'm on a phone call, the person on the other end can hear my call waiting beep?

  I just want to know how rude I can be seen if the caller on my line can hear my phone jump on the other side. Incoming call beeps are so distracting and I would like to know if my current call is able to hear the call notifications in the same way that I do. I hope not.

  The person at the other end of the line does not hear the beep.