Send an order via UDP bytes

Similar Questions

• Send instant messages via email from yahoo with the new version of firefox

  I can't send instant messages via email yahoo in the new version of firefox, how do I fix this problem

  Hi hwkangel,

  It looks like a known issue reported here:

  https://Bugzilla.Mozilla.org/show_bug.cgi?id=713014

  There was a workaround solution posted, but I have not tested it myself. Here are the steps.

  1. Go to the Yahoo Messenger Options - change the window in the tab menu and press OK.
  2. Then go back and switch to the small window and press OK.

  The bug has already been fixed. So, you can download the beta version of FF 10 If this is a really important feature for you.

  Hope this helps!

• Send or receive via bluetooth does not

  Hello
  Thanks for the great site and great forum.
  I did because I have a problem with my vaio VPCS111FM.
  First of all, I'm of the Syria and I bought it a month ago and it is really GREAT.
  but the problem is that I can't send / receive anything via Bluetooth. (

  He continues to display this message every time I try to send a file:

  

  even when I'm sure that it is turned on and working 100%.
  It can even show the other devices that are turned on but cannot send them anything.
  Here are my settings and make sure it's really :

  

  

  

  I thought to remove the bluetooth driver and put it back
  but I don't know how to do it! (especially remove it)

  any help please? It is important and I can't live without a bluetooth

  Thank you in advance.

  Hello

  Check if the physical hardware switch is turned on. It is located near the touchpad.

  Reinstall the bluetooth driver and update:

  Broadcom Bluetooth driver

  Broadcom Bluetooth Firmware update

  If the problem persists, see the following steps to troubleshoot bluetooth connectivity:

  https://us.en.KB.Sony.com/app/answers/detail/A_ID/31923

  If the problem persists, restore the system to an earlier date.

  https://us.en.KB.Sony.com/app/answers/detail/A_ID/31528

  In case, if the problem persists, our next step is the full recovery of the system to eliminate the problems of material as being the cause.

  https://us.en.KB.Sony.com/app/answers/detail/A_ID/35585

  If the problem persists, contact Sony at 1-239-768-7676 in the Syria, because you stand out-United States

  If my post answered your question, please mark it as an "accepted Solution".

• How to send frames to header + 1 byte of data in network LIN?

  Hello

  I use USB-8476 to communicate to a slave in a LIN network. Can someone tell me how I can send a header file more 1 byte of data to the slave in a LIN network.

  I need to send a sync + id 00 X 34 break, followed by a byte of data. I don't know how a master can send this extra 1 byte of data. I need to send this command to the LED and byte 1 to control the level of illumination of the LED lights.

  If anyone has examples for this, can share you here?

  Thank you

  Hi Andreas,

  This error has not yet been documented, but I got the information on the other forums.

  Error name error Code (hex) description

  Task-master of 1040 LinBusErrorTxSyncTimeout LIN interface is trying to send a

  synchronize the bytes and not not not receive the sync byte

  during the period.

  This is the description. The problem is solved, the baud rate I gave was higher than the speed of the slave units. Now, it seems to work correctly.

  Thank you.

• FASTRACK SUPREME - send command ATD via RS232?

  I'm working on the project, based on a FASTRACK SUPREME, that must receive the orders via a serial RS232. The

  It is:
  When I use HyperTerm the command ATDxxxxxxxxx; works very well.
  When I use the CVI RS232 library, nothing happens. Is it possible that my order stuck in

  the series buffer?
  Here is my code:

  #include
  #include
  #include
  #include
  #include
  #include
  #include

  int configurePort (void);
  int sendCommand (void);
  int port_open;
  int error;

  int main()
  {
  configurePort();
  sendCommand ();
  return 0;
  }
  int configurePort()
  {
  port_open = 0;
   
  error = OpenComConfig (4, "COM4", 115200, 0,8,1,0,-1);
  If (error)
  {
  printf("Error!\n");
  }
  If (error == 0)
  {
  port_open = 1;
  SetXMode (4, 0);
  SetCTSMode (4, 0);
  SetComTime (4, 0);
  }
   
   
  return 0;
  }
  int sendCommand)
  {
  char bufferWrite [100];
  FMT (bufferWrite, "%s", "ATD0040761768027");
  ComWrt (4, bufferWrite, 18);
  return 0;
  }
  Where is the problem? Help, please!

  Hi years,

  working with a modem can involve a few extra precaution to work with other serial devices.

  First of all, you say in Hyperterminal the modem receives orders: I remember that Hyperterminal always adds a newline at the end of each command so that you can try this first:

  ComWrt (4, 'ATD0040761768027; \r', 18);

  (BTW you can avoid passing through a string, unless you need to dynamically format during the show)

  Then, I would check in Hyperterminal if you use a form of handshake between the PC and the modem: If so, you need to satisfy the hanshaking even in your application of CVI.

  Third clue, that your modem may need an initialization to before it can satisfy a command AT; under Windows, you can configure the connection of modem to it creates a log file: create it and test it to find out the set of commands exchanged between HT and the modem.

  I guess this also addresses question of this thread : it is advisable to open only one thread per question so that everyone can add his experience and avoid the dulicating questions / answers unnecessarily.

• I can no longer send you pictures via my Panasonic Lumix program or the range of file photos. I can via Windows Live Mail but it is tedious to do.

  I can no longer send you pictures via my Panasonic Lumix program or the range of file photos.  I can via Windows Live Mail but it is tedious to do.  The problem started when I change my ISP AOL to Comcast (I think).  When I try to do as I have always done in the past, I get this message:

  Here is the message I get:
  The message could not be sent. The authentication setting are may not be wrong for your e-mail [SMTP] Server outgoing. To resolve this issue, go to help, search for "Troubleshoot Windows Mail" and read the section "I have problems sending e-mail". If you need help to determine the appropriate server settings, contact your e-mail service provider. The rejected e-mail address was '{removed email address}'. ' Subject ' Emailing: PTC Joan Huntsman 001.jpg, account: 'Imap', server: 'smtp.comcast.net', Protocol: SMTP, server response: ' 550 5.1.0 required authentication ', Port: 587, secure (SSL): no, Server error: 550, error number: 0x800CCC78

  Help!  Thank you

  original title: have trouble sending pictures

  How can I set up/configure Outlook Express, Windows Mail & Windows Live Mail to E-mail from Comcast?
  http://customer.Comcast.com/pages/FAQViewer.aspx?GUID=5be34cb1-B190-4FC1-BEAA-818778a54aed

• Not able to send multiple files via bluetooth

  I have had this problem since I bought my laptop. I am able to send only one file. In other words, when I right click on the file you want, there is a separate option "send to Bluetooth" allows me to transfer a single file to my phone or another laptop. But when I select several files and right-click on it and select ' send to--> Bluetooth device ", a window opens but it doesn't detect other bluetooth devices. I would also like to add that the drivers are updated and devices are in the range. The options "Send to Bluetooth" and "send to--> Bluetooth Device" are different. I'd be happy if someone gave me the solution.

  My laptop: HP Pavilion DV6 - 6006tu
  Operating system: Microsoft Windows 7 Home Premium

  Thank you.

  Hello

  Method 1:
  Try first to add and pair the device and then try to send files via Bluetooth. You can follow the below mentioned article that will give you information on add a Bluetooth device to your computer:
  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer
   
  Method 2:
  You can see the laptop manual to see the steps on how to send multiple files via Bluetooth or check Bluetooth section for the information you are looking for.
   
  Let us know if it helps!

• Cannot send/receive pictures via the BlackBerry Q10 Q10 blackBerry text

  Someone else do the new update and you are unable to send/receive pictures via text? I get an error "General problems" which tells me nothing. I've restarted and nothing works. I wish that I have never update could someone please help me. Thank you

  New...

  1. that already set you your incoming message? I think you set never receive MMS (multimedia media services)

  2. you can ask your provider to help the setting of their side...

• How to send an @ character via SMS?

  I hope it's a simple question for a person.

  I try to send my application SMS messages that contain the @ character (for an automated SMS), when received these messages show the "@" replaced by "i".

  I guess that this is related to the 7-bit character set, but given that I can send and receive SMS with this character manually there must be a work around?

  I use the DatagramConnection method to send, as this excerpt:

   
             byte[] bytes = sb.toString().getBytes();
              connection = (DatagramConnection) Connector.open( "sms://1234");
              Datagram datagram = connection.newDatagram( bytes, bytes.length );
              connection.send( datagram );
  

  Thank you!

  Bruce

  Nevermind the character 0 x 00 is the character in the encoding of 7-bit @.

• BlackBerry Smartphones can send/receive emails via my blackberry curve

  Hi I'm new to this forum and am not a user, even if were using a older Bay to work emails for the last 3 years; just got this new bberry lcurve ess than a month ago at best buy and they have set up to receive emails from my 2 separate and personal Treaty, no email work. It worked great until today about 05:20 Pacific when my last GSM 2 I sent were stuck and marked with a red 'x'. The last email I received was 05:08 and none after that.  I can receive/send emails normally via the portable and desktop.  I even checked the billing, and I'm not behind in payments. I was frustrated that I couldn't find any online help desk, so I hope a good person kindly help me to solve this problem.  Thank you!

  What is your service indicator in the upper right?

  Also have you tried pulling the battery and put it back?

• I have just recibe enamel of adobelicensing, where they send the order number and a link to download the software I purchased. But, when I try to download, after login, it gives me a message saying im not a user allowed to download. Help, please.

  I have just recibe enamel of adobelicensing, where they send the order number and a link to download the software I purchased. But, when I try to download, after login, it gives me a message saying im not a user allowed to download. Help, please.

  Download the free trial version Adobe Captivate | Adobe Captivate 9

• Error of TCP connection when sending MODBUS for WAGO controller 750-881 orders after 113655 bytes of data have been sent

  Hi all

  I'm new in the world of labview and trying to build a VI that sends commands to a controller of the WAGO 750-881 at regular intervals of 10 ms.

  To set each of the WAGO comics at the same time, I try so to send the Modbus fc15 command every 10ms using Labview standard TCP write module.

  When I run the VI it works for about a minute before receiving an error message 56 telling me the TCP connection has expired. This strange thought, I decided to record the number of bytes sent via the TCP connection while running the program. In doing so, I noticed that the link broken after exactly 113655 bytes of data have been sent each time.

  Thinking can I have sent too many messages, I increased the delay of the loop of 10ms to 20, 100 and 200 ms, but the error remained. I also tried to play with the TCP connection timeout and the writing TCP timeout, but none of these had no effect on the problem.

  I do not see why this error occurs, such as the program works perfectly up until what brand 113655 bytes.

  I've attached a screenshot of the base VI (simply showing a MODBUS command sent every second) and a more advanced VI (where I am able to control each of the WAGO manually by setting a frequency at which the DO is to switch between ON and OFF).

  If anyone has any ideas on where the problems lie, or that I could do to debug more program this would be greatly appreciated.

  AvdLinden wrote:

  Hi ThiCop,

  Yes, the error occurs after exactly 113655 bytes each time. Time-out control, I would like to use is 10ms, but even that will rise to 1 s or 10s does not error, which leads me to believe that's not the issue (as well, do not add any delay in the while loop, so let it run at the maximum speed showed that the TCP connection is able to send all the bytes 113655 in less than 3 seconds again directed towards control of time-out) is is not the issue here).

  I tried the suggestion of Marco but having difficulty to translate the string returned in a readable string (rightnow the answer given is "-# +" ' ").

  As for your second suggestion, I've implemented something similar, where I created a sub VI to establish a TCP connection, send a message and then close the connection. I have now to build each message and then send the string to the Subvi, which sends the command to my application successfully. While not the most elegant method to solve the problem, it solves the problem of time-out, which means that I am able to send as many orders as I want. So in this sense, the problem has been resolved.

  If you have advice on how to properly read the TCP read the output, I want however to see if I could not get my first program to work because it is slightly more robust in terms of timing.

  MODBUS RTU TCP is a binary protocol, as you show in your base VI, where you put in the form the data stream using byte values. So you have to interpret the returned answer accordingly with the Modbus RTU spec in the hand. Now what is probably happening is that the connection is suspended after a while because you do NOT read data from the device sends as response to your commands. The TCP/IP stack cushions these bytes and at certain point of overflow internal buffers and the connection is blocked by the battery. So to add playback of TCP in strategic locations (usually after each entry) is the right solution for this. Is there a reason any that you do not use the PROVIDED Modbus TCP library?

• FPGA for PC via UDP connection

  Hi all

  Background

  I am currently working on a project to interface an FPGA with a PC, to send a UDP load prepared on the FPGA for the PC. The FPGA is preparing a payload of 18 hexadecimal bytes from h00 8' to 8' h11 and then transmits it via a local network on port 1024, between the FPGA and a second network card in the PC, with static IP assigned to the second network card and the FPGA. Packages leave the FPGA and reached the PC (tested with wireshark) but the vi does not appear meet the payload and display it on the screen in the vi. The vi is based on that comes with labview and only has a few adjustments for most simply to write the final packages saved to a text file.

  Problem:

  Initially, when the vi was run the length of the chain kept evaluate to zero and so he perceived no bytes don't read from the port. I then inserted the flatten channel vi after the UDP read and before the comparison of string length (after reading something on the forum), now the length of the string is not evaluated to zero to 4 instead of this, I also changed the display to the spell option but the same 4 Hexagon keep coming through '0000 0000 0000 0D0A' , but they are not those who have been sent from the FPGA (are they an error message?) and not those taken over by wireshark. In summary, I seem to not be able to read the data of the UDP payload in Labview.

  I tested the VI locally using the Protocol UDP send labview vi and vi (slightly) custom receiver and it still works. The receiver that VI is attached.

  Any suggestions would be great,

  Thank you

  James.

  You can share the wireshark log (preferably in a format based on text that I did not install Wireshark)?

  Are you sure that is no firewall problem? If you are using a firewall, disable it completely for this network card or at least ensure that it accepts connections on UDP Port 1024.

  In addition, set the UDP sender VI on another computer and see if you are still receiving data. If it works, compare logs wireshark compared to what is sent by the FPGA and search for differences. If this does not work, then you have a network like a firewall problem.

• Send the order through a time series?

  Hello everyone...

  I am trying to send commnad linux to my robot through labview...

  I connect it by VISA. Bluetooth via USB.

  I faced poroble 2.

  1. it keep sending the same order everywhere in time.

  2 - timeout problms.

  My attached VI...

  Please help me

  manesaid wrote:

  How can I conect the button with the envent case. What is the right way to do

  If you don't know how to use the Structure of the event, you should definitely go through some tutorials online (many of which are free).

  Introduction of 3 hours
  Introduction of 6 hours
  Bases LabVEW
  Paced self-study for students
  Self Paced Training beginner to advanced, required SSP
  LabVIEW training Wiki
  OR learning
  Getting started with products OR

  But in a nutshell, you simply ask a Structure of the event, right-click on it and click on add event cases.  Opens a dialog box that allows you to create a folder for the value of the button change.

• Send the datagram via private WiFi network problem

  I'm confused with the sending of datagrams through the private wifi network!

  There are four examples of url to send the datagram in the sample RIMJUDPClient.java

  UDP://10.1.0.122:5029;19780/rim.NET.GPRS
  UDP://127.0.0.1:5029;19780/rim.NET.GPRS: use the Local testing this string
  UDP: / / < public IP >: < Port UDP >; 19780/proxy: use this String with AT & T Service GPRS
  UDP: / / < public IP >: < Port>;19780/internet3.voicestream.com UDP: use this string with T - Mobile GPRS Service

  However, I would like to send the datagram through the private wifi network and find an example url for non-GPRS network in "Development Guide:

  For example, the address for a connection of CDMA network would be udp://121.0.0.0:2332; 6343.

  So I tried the url ' udp://iport1; port2 /; interface = wifi", but it does not work in the 8320 (v4.2.2.180) device. the send() throw Exception content 'null '.

  My udp support private wifi network connection.

  My url is correct? Can you show me an example url used to create the connection for the private wifi network?

  Appreciate for any help!

  UI = wifi parameter has been added in version 4.5.0 of BlackBerry API set.  You will need to upgrade your BlackBerry device software in order to to use.  Please see the web site of your operator for an upgrade.