Send to the printer

Similar Questions

• Queue: print jobs are automatically send to the printer

  Original title:

  Queue

  I often work on the laptop when I'm not at work.

  My laptop I send jobs to the printer to work. The next day when I turn on the computer in my office, jobs are automatically send to the printer.

  Printer at work has changed to a new one (Minolta) and I can't do this anymore.

  What I can do!

  Thank you

  If you have been sending documents to the specific printer then you should be able to start the computer when you are at work and locate the printer in devices and printers. Right click on the printer and choose to see what's printing. When the print queue is displayed with your documents, choose printer, printer to use online.

  Note that older documents which have kept the printer used previously (Word documents and Excel workbooks are two examples of programs that keep the information on the printer), and then you should make sure that you send the print job to the printer.

• I want only to convert an Excel file to a .pdf file to send to the printer... I don't do this very often... there at - it a simple way to subscribe to this service?

  I want only to convert an Excel file to a .pdf file to send to the printer... I don't do this very often... there at - it a simple way to subscribe to this service?

  JT

  Hi jotall3,

  You can use the Pack of PDF from Adobe to convert an Excel file to PDF format. You can subscribe here: http://cloud.acrobat.com. I think you will find that it is a simple web interface to create PDF files.

  Best,

  Saara

• Files to send to the printer remains in the print queue

  My printer Brother HL-5470DW many years and has worked well as recently as a couple of days. Now start yesterday, everything I send to it (I've tried so far to print from Word, Notepad and Adobe Reader) just sits there in the print queue. (Also, I hear no sound, as if no communication to the printer took place; "I think that I do not usually such a sound, as if the printer wakes just.)

  It has always been possible to click Cancel for work out of the queue (which is what I do to ensure that each test is not blocked by the one who joined the queue before him). But by clicking on restart has not led to a change. No sound. Nothing, as if I had not clicked on it at all.

  I restarted the computer and that did not help. By turning the printer off and on again did not help either. The other printer on my network works, so the problem is specific to this printer. This printer is networked, too, but the network seems to recognize since, when I pull the ethernet cord our back, my computer seems to usually two tones you hear when you unplug a USB device as an external drive, and you hear the other standard two-tone when you plug the power cord back in - even ethernet once the same two-tone means when you plug a USB device.

  Troubleshooting Windows app recognizes a problem, presenting little yellow triangle used with an exclamation mark inside), but can't find anything wrong, despite the announcement of a great many things he checked with the result "there is no Question."

  This must be a common problem? But I have found no solution so far.

  I also opened a trouble with the brother society report on this subject, but they have not responded.

  Thanks for your help.

  I suddenly remembered that I have an account with Geek Squad which entitles to support me on their part so I called them, and the problem is now resolved. As a public service to anyone who is interested, I will present a report which re-start the computer, turning the printer then next turn, and re - installing the printer driver did not help (even if by turning the printer and turn it back on (that is, unplug and plug again at least there the message in the window of the printer to 'Pause' in 'Ready').)

  After these changes, we have reached at least point jobs were sent to the printer (they were no longer in the print queue), but when they got to the printer the results was simply that 'Data' and 'Error' lights came.

  Finally, something else has been tried: taking the paper out of the feeder and everything put back in. There is no reason that I see why this would work, but now all of a sudden he made. He had been without paper jams in this printer for months and months so that should have nothing to do with it!

  Although I don't see the connection, the tech support guy said that it had to do with the configuration of the printer port. And that fits at least with the fact that it is a new computer. According to that is the fact that - once we have solved the problem on this new computer - the old computer could no longer print: actually there now have exactly the same problem the new computer was seen: files sent to the printer simply remain in the print queue.

  If someone saw to offer as to how something so strange by removing the paper and put it back could solve that problem, I would like to know about it. Is there a way that this incident can be changed to a question in a discussion?

  Can anyone enlighten me as to what type of configuration of ports is involved and how you achieved it?

• Can I have Thunderbird automatically send an email to my printer on arrival? Maybe set a filter to send it to a folder that then sends to the printer?

  I'm going to set up a customer to receive emails of a service request form online... He of not tech saavy and wants that all incoming emails to print to the printer on arrival. When he arrives at the end of the day, he wants a stack of emails/forms, where it can return calls. I know it can be done in MS Outlook (ugh)... hoping that you can do the same or better! I am a long time user and rely on Tbird...

  https://getsatisfaction.com/mozilla_messaging/topics/how_to_print_e_mail_automatically

• How to change font size, that computer sends to the printer?

  Screen shows info of regular print, size but the printed product is super, super small.

  Just print up a few google documents.  Much to my surprise, the first two printed 'exactly' like they should.  On the third try, the impression returned to the small print.  I am completely stupid-based!

• When I export my file in jpeg format (so I can send to the printer) the picture is too small.

  not sure if it of the settings or how to get the right size for printing online.  at present it shows really small on the site of the printing company to the top

  What is the size of your document in Indesign? The printer requires a jpeg file? Most would a pdf.

• Is there a way to specify the print size when sending to the printer?

  Or is the only way to change the size of the image?

  No, the print size is managed by the printer.

  Thank you!

• Windows Vista cannot communicate with a lexmark printer. my computer continually refuses to send to the printer

  can someone pease help me to get my computer to communicate with my printer lexmark X 7675

  can someone pease help me to get my computer to communicate with my printer lexmark X 7675

  Printer problems in windows
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  The tutorial consists of 3 parts:
  Step 1: Check hardware
  Step 2: Use a troubleshooting tool
  Step 3: Update drivers

  Application Microsoft Support Fix It:
  http://support.Microsoft.com/mats/printing_problems/en-us

  Try this Windows tutorials:
  It consists of many themes that you can click and read the tutorials.
  There also an Fix It application
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Here is the main link with: Support for Windows Vista and troubleshooting technical issues - print
  http://support.Microsoft.com/ph/11732#tab11

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Cannot connect to the printer application

  I have access to and use all of the applications on my OfficeJet Pro, except for "On Demand" 8610 When I choose at the request of the printer, a screen to Log In just ask Email and password. Fill these fields with my HP account e-mail address and passowrd, but when I press "Login", it says "incorrect entery. Please try again. »

  This require a different password? Why is it not work?

  Thank you.

  Hi @mikedog

  Thank you for taking the time to answer.

  If you send to the printer use ePrint printer email print job prints without you being there.  With sweater print when you send the print job will stay in your print queue print pull until you connect to a printer to support (for example your Officejet 8610) and choose to print the document.  The document will automatically delete after 3 days, if you printed the work or not.

  I do not recommend that if you have questions about JetAdvantage from HP that you post on the HP JetAdvantage Support Forum-Forum on the sales of HP Support Forums.

• How can I disable the printed confirmation email?

  It is a 'feature' cute, but I don't need more junk emails!

  Hawkerman,

  To turn off the confirmation emails that you receive when you send a job to ePrint, you want to set up a list of senders.

  First, sign in to your account at http://www.eprintcenter.com.

  To the left of "Recent print jobs", you should see a button that says "ePrint Settings." Go ahead and click on that.

  The first page that appears is the settings "senders".

  You want to choose "Only authorized senders" and enter an email address that will send to the printer printing jobs. After you add an e-mail, he adds the e-mail address to a list below. You will then see a box next to the email address for "Email Job Status". If you uncheck this box, this e-mail address will no longer receive confirmation when it sends the work on behalf of the ePrint.

• Unable to start after the installation of the printer driver

  I have a dell with vista 32 pc I recently replaced a broken with an identical printer printer, but what either the reason society printer when sending to the printer installation instructions sent replacement and this includes reinstalling the driver for the printer, so I followed the directions to reinstall the driver. After all, the n is the desired computer restart, so it was the case, but OS could not open sent me to a silicone black white screen saying there was a problem with windows and does not, and I could launch a system repair or start windows normally. well repair luanching systems but it won't do anything at all and when you try to start normally it's just a black screen with a white bow doubled by a green line through it and now he used to statrt al all? can u help please

  original title: Please help__

  Follow these steps to try to solve your problems of boot.

   

   

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Dell recovery options:

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  Above is Dell to reinstall Vista from the DVD on your computer.

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  And that way if you have a recovery partition on your hard drive.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery, if required:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon. Mick Murphy - Microsoft partner

• Cs6 save the file for the printer company

  Question on master Parent AI file, or art presented in another file I send to the printer?

  I created a leaflet (2.83x11) that I can now add 3 to a sheet of 8.5 x 11 for 3 leaflets per leaf.  When I save the master flyer (the 2.83x11), I crushed my text in text outlines to 1200 dpi and rasterized my art at 400 DPi and then saved the file. Ok

  Then I open a new Board art 8.625 x 11.13 (to bleed) printing on the edge (border less) then place my Flyer 3 times on my plan of work and when I'm going to save this option to send to the printer here in lies my question (s)

  1. when I record a new workplan with a related Parent file this related info will save the file so that when my (printer) opens this file I. I bring the file Parent bound with it too on my USB key? Or the artboard will save all the contours and raster art on 8.65x11 the work plan?

  Take me to a second question

  2. when I go to save this new artboard flyer and 8.5 x 11. I'm asked or warned of 72 dpi rasterization of the newly placed flyer to be saved and then placed in the 1200 and 400 dpi in as mentioned above. But I think I should go effect > rasterize > high or other (fill in PPP)

  Here's the question if I save which place Parent, or the linked file and then rasterize, choosing 1200 as is the text of the first file is saved, it errors and says big enough to rasterize the 1200 dpi.  IF I rasterize say 400 dpi does now that sharp text I saved in the Parent bound 1200 file?   In other words how save you this file as it is stored in the master or the parent Flyer when you place it on a work plan for a printer?

  CS6 AI not cloud.

  Here's what I do.  I would like to see the screenshots of the dialog where you are notified to rasterize.  But, that aside except (ad I will continue when I have more time), the text in the presentation are vector curves.  No need to convert to text converted to outlines.  Leave the direct text, unless the printer ask contours.  When you generate the PDF file, the text becomes incorporated.  Resolution is located in the "exit".  You set the resolution of pixelation in Illustrator, if you applied some type of effects of rasterization (such as shadows).  It is, as far as I know, a maximum of 300 PPI in pixelation effects.  In General, when using a CTP (computer-to-plate) pre-press, a 5080dpi output resolution is common to generate a point as thin as 150 lines per inch.  Now get you to a point where you can understand the fundamentals and they understand no pixelation.  No deer at the level of the sender.

• My Lr5.7.1 does not recognize my printer Epson XP-760 and after customize printing in the print Module, printing options (lower right AND Main Menu > Archive > print) are disabled

  I am running Lr5.7.1 on an iMac, retina 5K (OS X Yosemite 10.10.1).) My printer (Epson XP-760) works fine with all other applications, but not with Lr! After choosing my printing preferences in the print Module, it works if I select print file and save it to the desktop and then return to preview and print from there. This is not what I want. I expect that the print button (bottom-right) should be disabled and not disabled and send to the printer directly from in the Lr print Module. It doesn't matter if the printer is turned on Wi - Fi or USB (or even both).

  What is the problem? What else can you or should I do to make it work as I hope?

  Gunnar

  My Swedish is not good, but I think that you print on file. Did you try chaning where it says JPEG it changed printer?

  You might also on 5.7. On Lr if you go to the Help\System of information, what is the version number? If she is 5.7, you're not on 5.7.1. Yo can still update manually, go to Adobe - Lightroom: for Macintosh: Adobe Photoshop Lightroom 5.7.1, download the dmg and install.

• HP Deskjet 3720: Reshape the photo on the document of the iPhone 6 before sending it to the printer with the Remote AIO app.

  I have yet to adapt a picture with AIO HP application form document before sending it to the printer.

  Harvest funtion works on the next screen, but I don't get a reduced version of the original photo when moving the adjustment screen to another, despite the reorganization of the Blues and lines points (that capture the doc OK outline)

  I have one using IoS iPhone6 9.3.5

  Any ideas please?

  Hello

  Try to use the fit to the screen options in conjunction with cropping - because of differences in proportions between your phone photo and paper size, it will be very difficult to get in, but with the help of cultures and adjust to page, you should achieve something close to what you are after.