Cs6 save the file for the printer company

Similar Questions

• Is there a way to 'batch' record as very? We have a customer who regularly sends files without all the embedded fonts. To clean the files for digital printing, save us as Postscript and pass them through Distller. "Save as Postscript is most of time consu

  Is there a way to 'batch' record as very? We have a customer who regularly sends files without all the embedded fonts. To clean the files for digital printing, save us as Postscript and pass them through Distller. "Save as Postscript is the longest part of the process, then I would be able to automate it.  Any ideas?

  This is the worst absolute way to embed fonts for PostScript through deletes dynamic transparency, color management, bookmarks, hyperlinks, etc. Yucck!  You are in many ways to ruin the files, do not clean them.

  Acrobat Preflight has a correction for embedding fonts. Takes only a few seconds per file PDF. And if you have a bunch of these files, you can create an action to do this.

  -Dov

• save multiple files for the web in JPEG max at a resolution of 800%

  I had more than 200 created illustrator files. They all have the same dimensions. I wanted an adobe illustrator script that saves all files for the web in jpeg.

  Export options must be max.resolution of all files should be increased to 800%.

  I think it's the reasoning

  Open a folder with all the files

  loop through each file

  Save for web each in jpeg format to the quality of resolution and up to 800%

  the names of all jpeg files should be the same from these illustrator files (if possible)

  I will be very thankful to you if you could help me

  Best regards,

  Hassan Ali

  As far as I understand your request it is also possible with a simple action in batch mode.

• How can I save my files for printing?

  I can't find out how to save a file for printing. The file must be transferred to a company that prints your photos on glass (Fracture) they want the file between 16-20MB. Whenever I save it, it is too big. Of course, I want to be high resolution, so I put that at 300 DPI. (resampled to 72). Help, please.

  I think that you will be very disappointed with the results if you use a 1867 x 1200 for this image.

  When you resample an image, Photoshop has invent the missing pixels, and in this case, the majority of the pixels in the image will have to be invented.

  If the image is from a digital camera, get your hands on the original, which is can be much larger.

  According to the homepage of Fracture, they want a 6480 x 8460 image at 300ppi for your format.

  300 DPI is probably overkill for this size, my guess is that 180 dpi might be enough.

  In this case, the image must be 4320 x 5760, which is what would produce a 24 megapixels.

  You might even get away with upsampling an image from a camera megapixels 15 or 16 years.

  Ask what they think of the Fracture.

  Regarding the 20 MB limit, save the file in jpg format, and then choose the highest quality that will not exceed 20 MB.

  To get a better understanding of how how digital images work, take a look at this page: which is a digital image?

  RECTANGLES (Portrait or landscape)

  Size	Print size	Weight	Printing resolution	Price
  Small	4.8 x 6.4 inches.	0.26 lbs	1440 x 1920 px	$18
  Medium	7.2 x 9.6 inches.	0.38 lb	2160 x 2880 px	$40
  "Classic".	10.8 x14.4 in.	1.26 lb	3240 x 4320 px	$65
  Large	15.6 x 20.8 in.	1.64 lbs	4680 x 6240 px	$85
  Extra Large	21.6 x 28.8 in.	5.21 lbs	6480 x 8640 px	$125

• CS6 save the trace appears not

  Hello

  I made a path in photoshop cs6 and you want to save and load it back in, but the save path does not come more from the drop path, make a right click or double click...

  Also I have not seen where I would put the path on my HD and how to load a path in return?

  Pls share how it works.

  Kind regards

  Frank

  When you double-click a way to work a way save as dialog for path name. The path is then stored in the Panel traced and stays there when you save the document.

  However, if you need the path of access to another application, you can goto file > export > traces to illustrator. This will create a file I that contains a path with no line and no fill. Just keep in mind when you view it in another application. It requires a program such as Illustrator to give it a fill and a stroke or.

• DeskJet D1341 new software message said "save the print media as" but then won't print

  HP has made a software change, so now when I try to print it says 'save the output as', but there are two problems: (1) I don't want to save the output of printing to a file - I just want to print the document, like HP used to let me do. (2) even if I enter a file name, it does still not print.

  Hi @M156

  The default value is generally Adobe, but on my computer, I opened a PDF file and the file opens in Internet Explorer, with an intake in Adobe.

  I suggest you go on the Tools button and then press or click on Manage Add-ons. Under display, tap or click all add-ons. Make sure that your Adobe add it is activated.  - Source

  

  I suggest making sure you have all your Windows updates and verification of updates of Adbove too.

  Keep me posted, thank you.

• Two questions - cannot save the printer shares with the error code 0x000006d9 and part of the Machine is not accessible from the network of working groups

  I think this are problems, but here is the separately questions, first of all - the basics:

  4 PC network using the working group with two Windows 7 (ultimate) and two xp.  Everything worked fine with the a previous vista / xp 3 network.  All except the Windows 7 Desktop behave well. The network is connected with a modem cable to a 5XT netscreen NS (firewall hardware to the outside and the inside hub), a netgear wireless access point and Windows workgroup use (as mentioned above).  Name all is correct on all machines, all the discovery settings are in place and each has Norton Internet security for its local protection services. Upgrades of Windows 7 have been computer vista laptop connected wireless and wired desktop previously running XP Professional sp3.  XP conversion was assisted on the desktop of the wizard upgrade Laplink PC Mover.  Applications executed in appearance on the two level computers.

  On the desktop - I can't share printers. When I use "networks and printers" in the start menu to share on a printer I get code 0x000006d9 error saying something like the configuration cannot be saved.  All local jobs printing works well.

  On the desktop - the name of the computer records also of all as on the network (it is discovered and mapped by each PC) but when I try to access it from any other machine I get a general error says something like "check your spelling of the name mannequin." This desktop computer Win 7 can browse shared folders on the network of and write about everything.  Somewhat added data - this device can ping all others in the network sucessfully but none get a ping successfully into the offending machine either with ip address or computer name (times out waiting for a response or said the name is not found).  He himself can ping successfully.  It accesses the internet very high hand.

  Solutions have been attempted without a firewall (Firewall Norton Smart Internet - 2010), with the firewall and various changes to authorization.  A final discovery was that Windows Firewall will not allow because BFE is not able to start - error 5 - access denied (this was discovered by train to allow a possible solution because of some internet chatter that the Windows Firewall must be running to implement shared printers).  All other dependencies are running to get a break on why BFE is not (it turns on the Win 7 laptop as well as the firewall).  Authorizations have been verified in the registry for settings of firewall and BFE (ports, permits, etc.) have also been looked at with a very critical eye.  SFC has been run with no problem.  All ports for net drivers, Win 7 networking and other actions are open in the firewall.

  Then people - I did some internet research and I tried a lot of suggested solutions nothing doesn't.  My apologies in advance if a person provides a solution and I say "tried".  Any help is very appreciated

  You can mark this as resolved problem!
  The program involved, causing this error is firewall Windows, here is what you need to do to fix this...
  If like me you have disabled windows firewall, I use Security Suite of ZoneAlarm, you will need to re-enable the firewall to share the printer.

  If you have disabled or turned off the Windows Firewall. (and in my case this error was caused by exactly that)
  Step #1 - disable any other firewall can be installed. Stop to load at startup and restart your PC.

  Step #2 - go to the tools of Admin folder > Services > Windows Firewall > double click and is it set to manual or automatic and keep it.

  Step #3 - open Control Panel > system & security > Windows Firewall > enable or disable the Windows Firewall > (Enable) turn on the Windows Firewall > save
  Then go to Restore Defaults > click on restore default button > save
  (you only do this IF you have changed the settings of the firewall, but it is always a good idea and will ensure that there are no problems during the proceeding)

  Step #4 - click Control Panel Home > view devices & Printers > Select / click on your printer > screen printer properties > share > share this printer > OK

  Step #5 - go back to firewall Windows and the tower he walks back > save

  Step #6 - go back to Services > and the Manual value Windows Firewall (or turn it off if you want, I recommend the manual)

  Step #7 - reboot and re-enable your firewall preferred to start at startup > Reboot

  Step #8 - take a deep breath and sigh of relief! :)

• CS6: save the psb in pdf format. only the options psb, thought, & tiff!

  Hello!

  I use photoshop cs6 and I need to save my file of psb in pdf format so that I can send by e-mail. I've already flattened the layers and it's 8-bit/channel. Is there something I can do?

  Thank you!

  Save as tiff and then save them in pdf format. There is no option to convert directly from the psb in pdf format.

  Gene

• do not save the print settings

  I am trying to print to a Zebra GK420d printer and firefox don't remember my paper size once a label is printed. Ideas on how to force a format of paper and do remember?

  I'm on windows 7 and have changed the size of my printer paper, preference and properties of the printer and it will print successfully in Notepad.

  Hi jpoeffel,

  Have you looked at the article Knowledge Base, solve the printing problems in Firefox? There is some good information in there troubleshooting. I suggest that you try to reset the print settings.

  If this does not work, you should look at article unsaved Preferences.

  Hope this helps!

• my printer says I'm missing a driver paid for a download of file wiafbdrv.dll__I file, but I need to know where to insert this file for my printer.

  Printer is a Kodak all-in-one model 3250

  Hi bilkomike,

  1. when exactly you get the error message?

  We recommend that you reinstall the printer and check the result.
  see How to download and install the latest printer driver from your printer manufacturer's Web site .
  b. follow the instructions on the Web page correctly to install the printer successfully.
  c. restart the computer and check the difference.

  For additional troubleshooting, see resources for the resolution of the printer in Windows XP problems

  For further assistance, please contact Kodak support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Save a file for a PES file default .psd and not ps.

  Hello world

  I am currently taking a college class on Photoshop and digital photography online.  I use Photoshop Creative Cloud and save all my work as .psd files to allow my teacher to display my work flow. I also have Photoshop Elements on my laptop that I used to use as my program prior to the go - to photo editing class.

  When I save a file in Photoshop CC as a .psd file, the icon logo "pse" (Photoshop Elements) instead of "ps" (Photoshop) logo.  It does look as if I worked in the elements and not in the program Photoshop CC required, even if I did not open the photo in elements, working exclusively in the creative cloud and convert to 16-bit immediately, which is not compatible with the elements.

  I suppose that elements is somehow selected by default because it is first install the program. But how can I do Photoshop CC my program by default when you save .psd files? Any help will be greatly appreciated. I've exhausted google!

  Right-click on a psd file in Windows Explorer and then choose open with > choose default program...

  In the next dialog box, select Photoshop and check always use the selected program to open this type of file.

  

• I have an Aspire 571 V3 that I thought that I was restoring the factory settings and save my files for

  Hi everyone, I hope that there is someone out there who can help me. I have an Aspire 571 V3 that I picked up at the factory settings, or so I thought. After all the files had been cleared and the system recovered it restarted and displayed a black screen with 'the installation program starts services' and a flashing light below are progressing. It has been that way for hours eight (8). is this normal or should I worry? In its current form, I have no control on the machine on the touch pad or mouse. I have provided with Currys computer recovery discs, but they are not to be recognized.

  Kalimera

  8 hours is a little too, you can try to stop it and repair the resumption of the process.

  do a long press on the power button to stop it

  at the next startup, press Alt + F10, and then check if you are able to start the Acer recovery process

  If it isn't

  Enter the BIOS by pressing F2 at startup

  enable F12 boot menu if not already enabled

  Save and exit

  put your first recovery disk on your laptop

  stop your laptop making the long press the power button / stop

  at the next startup, press F12, and then on the startup list select DVD/CD player

• Save a file for later

  I want to know if you can save files in LR as you can the PS as a psd. so that I can continue where I started. I had a picture I was working on that and just left open LR because I had to leave, and when I power was out and I had to start because I didn't save it. I do not want to save in JPEG format if I'm not finished, then how do I save my current research

  I don't really know what happens if the power goes out in the middle of editing, but I suspect that most of your changes (maybe not a last) will be recorded.

• Could someone come back to save a file for me?

  I have a 7.5 Indesign file that I need to open with CS5.

  Someone could tell me where I could send my file and get it registered return?

  You can export the CS5.5 file as a .imdl file and open in CS5. Unless of course you have CS5.5, then PM me and I'll send you an email address.

• When I export my file in jpeg format (so I can send to the printer) the picture is too small.

  not sure if it of the settings or how to get the right size for printing online.  at present it shows really small on the site of the printing company to the top

  What is the size of your document in Indesign? The printer requires a jpeg file? Most would a pdf.