Sending user to different URLs with alert message

Similar Questions

• Problems with alerts Messages blackBerry Smartphones

  For some strange reason, my BB Curve shows that I have 1 Missed call, but when I go into the phone and close, call messages remains on the screen.

  How can I clear it so I don't keep thinking I missed a call.

  Have you tried removing the battery for 30 sec?

• Send a message electronic alert message when user connections

  Does anyone know how to set up an alert for a notification e-mail when a user connects to the VMWare cluster?  We have specific users who have a specific role, but my management would like to keep under lock and key in the event where all admins to get hit by a bus, a plane crash, drown in a boating accident, etc. at the same time a user of emergency.  In order to ensure that this user is only used during the terrible events listed, I'd like to as notification out when this user logs on.  All those put up something like this?

  In vSphere, you can create a custom alert data center with a triggen on the user login.

  With old Server vCenter, you must find the table DB was connection (and other events) are stored and develop a DB trigger.

  André

• Whenever I send an email error message box comes up (with no message displayed)

  Whenever I send an email error message box comes up (with no message) and the email is sent to the Outbox, even if the email is actually sent and received by the addressee. Enamel and then continually gets sent unless I have delete the email from the Outbox file. Anyone know why this is happening and what can be done to remedy this? It's frustrating because I don't get a copy of the email in my file sent as back up.

  CrystalBall told you use Outlook Express. Fix? You have corruption of dbx files.

  Spend most of your messages out of the Inbox and then create new folders to send and sent items box after having moved the messages you want to save to a local folder that you create.

  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.

  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.

  With OE closed, find the DBX files for the items in the Outbox and sent and delete them.  New ones will be created automatically when you open OE.

  After you're done, followed by compacting your folders manually while working * off * and do it often.

  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.

  General precautions for Outlook Express:

  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.

  Information on the maximum size of the .dbx files that are used by Outlook Express:
  http://support.Microsoft.com/?kbid=903095

  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3

  Why you don't need your anti-virus to scan your email
  http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

  Note that for some AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck analysis when the option is the result of e-mail messages.

  Compact often as specified above.

  And backup often.

  Outlook Express Quick Backup (OEQB Freeware)
  http://www.oehelp.com/OEBackup/default.aspx

• Photos will not send with the message.

  When I try to send a message using Windows Live Mail with photos I get a message saying (one or more of the pictures in this message could not be found.) When you send this message, these photos will not be included. "Are you sure you want to send this message?) Yes or no if yes, some people have photos but in a different format as a message where they are not supposed to be. The Geek Squad at best buy didn't. If type of ruins a good joke, if the image is not included. I thank Bill

  Sounds like your transfer this / these jokes and does not not enamel photo?

  http://answers.Microsoft.com/en-us/search/search?searchterm=forwarding+pictures+not+sending&CurrentScope.ForumName=windowslive&CurrentScope.filter=LIVEmail&askingquestion=false

• "RunDLL" error starting with a message "there was a problem starting C:\Users\Patti\AppData\Local\Temp\MicrosoftGames\djdhrmx.dll.

  Whenever I start my laptop I get a "RunDLL" window with a message "there was a problem starting C:\Users\Patti\AppData\Local\Temp\MicrosoftGames\djdhrmx.dll the specified module could not be found."  How can I solve the problem and stop this message from appearing?

  original title: RunDLL

  Chooses a different path by doing a system restore. For me, it was a less complex approach. In any case, thanks for your response.

• Help urgently needed! -User profile takes a long time to load and the rest of the screen with the message "Please wait loading profile service user.

  Hello

  Every time that connect us to servers of TS farm, the profile of the user load for a long time and she stays with a message "Please wait for the user profile service" for longer than 5-6 minutes. We work in two areas which is configured as "an endorsement of forest transitive way." The domain (domain A) with TS farms hence connect us a cross forest profile disabled so we cannot load the roaming profile in this area, whereas another domain (domain B) roaming profile user's roaming profile.

  Also in the directory the Active directory of the domain B, TS/RDS settings is enabled for the problematic profile.

  TS / RDS--> roaming profile path and TS home folder is configured. TS/RDS settings is configured because we use other farms of machines/TS citrix other than the one in which there is problem.

  When disable us TS/RDS of the directory settings active directory domain B, then it is extracted to improvement in time. But we're in a situation were we cannot disable TS/RDS settings as we use other Citrix machines also. So we tried configuration GPO in A TS domain as

  Which allows to "allow only the local user profile".

  Allowing 'profiles itinerant Prevent password propagation to the server.

  This allows to "Allow asynchronous user group policy processing when you connect via Terminal Server Services"

  But still, there is no improvement in the time taken by the server to connect. What is the adjustment to make in the field of A TS, such that he will not try to charge the roaming of the B domain user profile, even if TS/RDS settings for the user profile are configured?

  Forums of evil: you want to Technet forums.  It's more domestic consumption...

  https://social.technet.Microsoft.com/forums/

• Install the latest version of Flash Player for internet Explorer, I stopped at the end with the message "User does not have sufficient privileges to install"

  I stopped at the end of the installation of Flash Player for Internet Explorer with the message "User lacks sufficient privileges to install" despite having Flash Player installed because I bought my computer. My internet Explorer browser will now display the videos saying that I have the latest version of Flash Player. Videos had previously shown fine on Int.Explorer over 5 years and see the normally on Flash Player using Google Chrome.

  Hi James Goldberg,.

  I recommend you install it using your administrator account on your system or right-click on the configuration file and choose "Run as Administrator".

  Hope that helps, please let me know if you face any problem.

  Kind regards

  Rahul Tyagi

• How can I send docs to multiple signatories with different addresses on sign of Echo?

  How can I send docs to multiple signatories with different addresses on sign of Echo?

  Hello

  In EchoSign, you simply have to add e-mail addresses to each signatory in the box 'To' and set the saved order. If you have to close, you must enter your last e-mail address and check the box "I need to sign. The shape that you send must have signature of blocks for each signatory but apart from that, there are other special rules or the necessary implementation. If you continue to experience problems try this, detail your problem here and I'll do what I can to help.

  See you soon!

  EchoSign-Rob!

• alert message that displays until the user click on a cross to close

  Hi all

  Can someone point me in the right direction to create an alert message that, once the user button click Close or something simlar it disappears?

  Wooops!

  I forgot a line in the javascript code, add the "BOLD"...

• What's up with the messages 'alert '?

  Hi guys.

  This may sound stupid, I know, but it seems that I am not able to use alert messages...

  I built an extension using Flash Builder and Extension Builder and sometimes I simply use "Alert.show ("message of Muy")" to quickly debug a value, but I don't see anything in the extension.

  What is the problem with that?

  Thank you!

  Try this: Alert.show ("My Message", "Title", Alert.OK, Sprite (mx.core.Application.application));

  It's kind of hidden, but the docs explain this in the section "Setting up alert dialog boxes to an extension", you can find here: http://cssdk.host.adobe.com/sdk/1.0/docs/WebHelp/programmers_guide/customizing_the_ui.htm.

• How can I send a different URL than the States of text in Acrobat?

  Hello

  I know how to create links URL in my document using Acrobat, but

  How can I create a link that leads to a desintation for different URL other than that of the text States?

  For example

  the States of text

  www.AAAAA.com

  and I want to clarify,

  but I want the link to direct to

  www.AAAAA.com/abcdefghijkl

  ?

  I don't want to have to create a link object, I want him to stay as text?

  Is it still possible?

  Any advise?

  Thank you

  Unless you create a link object, then it is of course impossible. Text is just text, there should be no special function.

• Create different group with VPN remote access

  Hello world

  The last time, I ve put in place a VPN for remote access to my network with ASA 5510

  I ve access to all my internal LAn helped with my VPN

  But I want to set up a vpn group in the CLI for a different group of the user who accesses the different server or a different network on my local network.

  Example: computer group - access to 10.70.5.X network

  Group consultant network - access to 10.70.10.X

  I need to know how I can do this, and if you can give me some example script to complete this

  Here is my configuration:

  ASA Version 8.0 (2)
  !
  ASA-Vidrul host name
  vidrul domain name - ao.com
  activate 8Ry2YjIyt7RRXU24 encrypted password
  names of
  DNS-guard
  !
  interface Ethernet0/0
  nameif outside
  security-level 0
  address IP X.X.X.X 255.255.255.X
  !
  interface Ethernet0/1
  nameif inside
  security-level 100
  address IP X.X.X.X 255.255.255.X
  !
  interface Ethernet0/2
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface Ethernet0/3
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface Management0/0
  Description Port_Device_Management
  nameif management
  security-level 99
  address IP X.X.X.X 255.255.255.X
  management only
  !
  2KFQnbNIdI.2KYOU encrypted passwd
  passive FTP mode
  DNS server-group DefaultDNS
  vidrul domain name - ao.com
  access-list 100 scope ip allow a whole
  access-list extended 100 permit icmp any any echo
  access-list extended 100 permit icmp any any echo response
  vpn-vidrul_splitTunnelAcl permit 10.70.1.0 access list standard 255.255.255.0
  vpn-vidrul_splitTunnelAcl permit 10.70.99.0 access list standard 255.255.255.0
  inside_nat0_outbound list of allowed ip extended access all 10.70.255.0 255.255.255.0
  pager lines 24
  Outside 1500 MTU
  Within 1500 MTU
  MTU 1500 management
  IP local pool clientvpngroup 10.70.255.100 - 10.70.255.200 mask 255.255.255.0
  ICMP unreachable rate-limit 1 burst-size 1
  ASDM image disk0: / asdm - 602.bin
  don't allow no asdm history
  ARP timeout 14400
  Global 1 interface (outside)
  NAT (inside) 0-list of access inside_nat0_outbound
  NAT (inside) 1 10.70.0.0 255.255.0.0
  Access-group 100 in the interface inside
  Access-group 100 interface inside

  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout, uauth 0:05:00 absolute
  dynamic-access-policy-registration DfltAccessPolicy
  Protocol RADIUS AAA-server 10.70.99.10
  AAA authentication enable LOCAL console
  the ssh LOCAL console AAA authentication
  LOCAL AAA authorization command
  Enable http server
  http 192.168.1.2 255.255.255.255 management
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
  Dynamic crypto map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs
  SYSTEM_DEFAULT_CRYPTO_MAP game 65535 dynamic-map crypto transform-set ESP-DES-SHA ESP-DES-MD5
  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
  outside_map interface card crypto outside
  crypto ISAKMP allow outside
  crypto ISAKMP policy 10
  preshared authentication
  the Encryption
  md5 hash
  Group 2
  life 86400
  Crypto isakmp nat-traversal 30
  Telnet 0.0.0.0 0.0.0.0 inside
  Telnet timeout 5
  SSH 0.0.0.0 0.0.0.0 outdoors
  SSH timeout 5
  Console timeout 0
  outside access management
  dhcpd manage 192.168.1.2 - 192.168.1.5
  dhcpd enable management
  !
  a basic threat threat detection
  Statistics-list of access threat detection
  !
  class-map inspection_default
  match default-inspection-traffic
  block-url-class of the class-map
  class-map imblock
  match any
  class-map P2P
  game port tcp eq www
  !
  !
  type of policy-card inspect dns migrated_dns_map_1
  parameters
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the migrated_dns_map_1 dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the netbios
  inspect the rsh
  inspect the rtsp
  inspect the skinny
  inspect esmtp
  inspect sqlnet
  inspect sunrpc
  inspect the tftp
  inspect the sip
  inspect xdmcp
  Policy-map IM_P2P
  class imblock
  class P2P
  !
  global service-policy global_policy
  vpn-vidrul group policy internal
  vpn-vidrul group policy attributes
  Protocol-tunnel-VPN IPSec
  Split-tunnel-policy tunnelspecified
  Split-tunnel-network-list value vpn-vidrul_splitTunnelAcl
  value by default-field vidrul - ao.com
  test 274Y4GRAbNElaCoV of encrypted password privilege 0 username
  username admin privilege 15 encrypted password bTpUzgLxalekyhxQ
  attributes of user admin name
  Strategy-Group-VPN-vpn-vidrul
  username, password suporte zjQEaX/fm0NjEp4k encrypted privilege 15
  type tunnel-group vidrul-vpn remote access
  vpn-vidrul general-attributes tunnel-group
  address clientvpngroup pool
  Group Policy - by default-vpn-vidrul
  IPSec-vpn-vidrul tunnel group attributes
  pre-shared-key *.
  context of prompt hostname
  Cryptochecksum:d84e64c87cc5b263c84567e22400591c
  : end

  What you need to configure is to imitate the configuration on the tunnel-group and group strategy and to configure access to specific network you need.

  Currently, you have configured the following:

  vpn-vidrul group policy internal
  vpn-vidrul group policy attributes
  Protocol-tunnel-VPN IPSec
  Split-tunnel-policy tunnelspecified
  Split-tunnel-network-list value vpn-vidrul_splitTunnelAcl
  value by default-field vidrul - ao.com

  type tunnel-group vidrul-vpn remote access
  vpn-vidrul general-attributes tunnel-group
  address clientvpngroup pool
  Group Policy - by default-vpn-vidrul
  IPSec-vpn-vidrul tunnel group attributes
  pre-shared-key *.

  What you need is to create new group policy and the new tunnel-group and configure the tunnel split ACL to allow access to specific access required.

  The user must then connect with the new group name and the new pre-shared key (password).

  Hope that helps.

• A doubt about the alert Message...

  Hello
  
  I am very new to Oracle Forms & I use Forms 6i.
  
  As I practice some bases as 'Validation' a text element I went by a few examples of code to bring or poping-up alert messages...
  
  Here is my Code... in this I don't understand Y... .do write us the 'Message ('no msg')' line TWICE... ??
  
  Although I commented on the 2nd one... but there must write two times... & wat is the logic behind it...?
  
  Help, please...
  
  ---------------------------------------------------------------------------------------------------
  Begin
  
  If (: aijaz_emp_master.em_dob >: aijaz_emp_master.em_doj) then
  
  set_item_property ('em_dob', current_record_attribute, 'VA_ERRORS');
  
  -If (: aijaz_emp_master.em_dob is not null and (: aijaz_emp_master.em_doj >: aijaz_emp_master.em_dob)) then
  message ("DOB must b higher or NULL MJ '");
  -message ('wort upper b DOB or NULL MJ');
  
  raise form_trigger_failure;
  
  on the other
  set_item_property ('em_dob', current_record_attribute, 'VA_NOnERROR');
  end if;
  
  end;
  ---------------------------------------------------------------------------------------------------------

  MIRA,
  I agree that this can be a little confusing, but once you understand the difference between messages and alerts it will make sense.

  In Oracle Forms, a 'Message' is any information that is displayed in the 'Message' of the forms Console line and requires no interaction with a user. The console is displayed at the bottom of the window and includes the 'Message line' and 'Statue line. If the message line already has a message, and then forms will promote the message in an alert (popup window) and the nouveau/deuxieme message is displayed in the message line. In general, many forms developers will use this "Double-Message" method to display information in an alert because it is less lines of code to assign the text of the message in an alert and then display the alert. It is advisable to always call the built-in function Clear_Message() before calling Message built-in to prevent unintential * promotion message.

  An alert in a physical object in a form of Oracle (note: there is a 'Alerts' node in the browser of object of forms). There are three types of alerts of forms: Note, attention and stop. Display the notes information, precautions display warnings and errors off display program, or critical information. In order to display an alert, you must first create an alert object in the Alerts node. You can create an Alert object for each of your posts, but this creates clutter and can be confusing. I prefer to use three alerts - one for each type (Note, attention, Stop) and then programmatically set the title, the text of the message and the buttons (max 3). As you can see, there is more work involved to display an alert. In addition, the integrated Display_Alert() is a function if you need a variable to receive the value returned by the call to Display_Alert.

  Here is an example of using e-mail in the forms:

  /* Standard message */
  BEGIN
     Clear_Message;
     Message('Display in the Message Line only');
  END;
  
  /* Message to display Alert */
  BEGIN
     Clear_Message; -- make sure you don't accidentally promote a different message
     Message('Display in the Default Alert');
     Message('Display in the Default Alert');
  END;
  
  /* Message displayed in a Note Alert */
  /* Assumes an Alert of type "Note" has already been created. */
  DECLARE
     al_id      ALERT;
     al_btn    NUMBER;
     v_msg    VARCHAR2(200); /* Max Characters that can be displayed in an Alert */
     v_title    VARCHAR2(78);  /* Max title characters */
  BEGIN
     al_id := Find_Alert('Note');
     IF NOT ID_NULL(al_id) THEN
        v_title := 'This is an informational message';
        v_msg := 'This is an informational message that requires the user to acknowledge the message';
        Set_Alert_Property( al_id, TITLE, v_title);
        Set_Alert_Property( al_id, ALERT_MESSAGE_TEXT, v_msg);
        al_btn := Show_Alert( al_id );
     END IF;
  END;
  

  Personally, we have a library package, we have created to simplify the display of alerts and allows you to set the properties of the alert and display it in a single call.

  /* In this sample, I use named notation to
  illustrate the meaning of the different parameters
  in our wrapper package. */
  DECLARE
     al_button  NUMBER;
  BEGIN
     IF (:aijaz_emp_master.em_dob > :aijaz_emp_master.em_doj) THEN
        set_item_property('em_dob', current_record_attribute, 'VA_ERRORS');
        al_button := message_pkg.warning( TITLE => 'Warning: DOB Required',
                                    MSG_TEXT => 'DOB must b NULL or Greater tahn DOJ',
                                          BUTTONS => 'OK');
        raise form_trigger_failure;
     ELSE
        set_item_property('em_dob', current_record_attribute, 'VA_NOnERROR');
     END IF;
  END;
  

  Hope this helps,
  Craig B-)

  If someone useful or appropriate, please mark accordingly.

  Published by: Silvere December 13, 2010 10:31

• How can I get help outlook express? When I send a mail, I get an error message indicating the e-mail was sent not.

  Had problems with Outlook Express.  When I send a mail, I get an error message indicating the e-mail was sent not.  The e-mail has been sent, but it never leaves the output area.  I have to go and delete the e-mail.  Then I don't have a folder of e-mails, except in my deleted file.
  Any help would be appreciated.

  You have apparent dbx file corruption.

  Spend most of your messages out of the Inbox and then create new folders to send and sent items box after having moved the messages you want to save to a local folder that you create.

  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.

  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.

  With OE closed, find the DBX files for the items in the Outbox and sent and delete them.  New ones will be created automatically when you open OE.

  After you're done, followed by compacting your folders manually while working * off * and do it often.

  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.

  General precautions for Outlook Express:

  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.

  Information on the maximum size of the .dbx files that are used by Outlook Express:
  http://support.Microsoft.com/?kbid=903095

  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3

  Why you don't need your anti-virus to scan your email
  http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

  Note that for some AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck analysis when the option is the result of e-mail messages.

  Compact often as specified above.

  And backup often.

  Outlook Express Quick Backup (OEQB Freeware)
  http://www.oehelp.com/OEBackup/default.aspx