Serial number Mac Book Pro?

Similar Questions

• I have a Mac Book Pro, which does not include a CD slot and I bought the Suite Adobe 6 CD. Download the program from the Web site using my serial number?

  I have a Mac Book Pro, which does not include a CD slot and I bought the Suite Adobe 6 CD. Download the program from the Web site using my serial number?

  Hi Haley,

  Please download Creative Suite 6 applications

  Kind regards

  Sheena

• IV already bought cc for my iMac but also well want it on my Mac book pro. How can I do this? IV downloaded it on my Mac book but the serial number doesn't work

  Hi guys. IV already bought a year of CC and have it on my iMac. I now like it on my Mac book pro as well. How can I do this? I think I can have it on both machines at the same time

  Hi Clint,.

  Please refer to the help documents below to download the application Adobe CC:

  Creative cloud to desktop

  Download, install, update or uninstall applications

  Terms of license: licenses and terms of use | Adobe

  Kind regards

  Sheena

• I bought the edition student CS4 design premium since 2009, I have a new mac book pro without CD rom recently, I went to the apple store to help install, but the application CD 2 is not working, how can I install my cs4 now? I have my serial No.

  I bought the edition student CS4 design premium since 2009, I have a new mac book pro without CD rom recently, I went to the apple store to help install, but the application CD 2 is not working, how can I install my cs4 now? I have my own serial number adobe can give me a link or any suggestion for me? ! Thank you very much

  Download through the page linked below and use the serial number, you need to activate it.

  CS4 - http://helpx.adobe.com/creative-suite/kb/cs4-product-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS3 and CS4: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html

• I bought the Creative Suite 5 cloud in June 2010 (Ser # DELETED) if I recall with two licenses, one for my laptop iMac book Prod and one for my iMac 27 "flat screen.  My Mac Book Pro needs to be replaced by a newer Mac Book Pro wi

  I bought Cloud Creative Suite 5 in June 2010, if I recall with two licenses, one for my laptop iMac book Prod and for my iMac 27 "flat screen.  My Mac Book Pro should be replaced with a new Mac Book Pro with recent operating system software upgraded OS.  What can you do for allowing me to transfer my course in Creative Suite 5 for my new Mac Book Pro?

  [NEVER SEND A SERIAL NUMBER IN AN OPEN FORUM.]

  [personal information... [Mod - https://forums.adobe.com/docs/DOC-3731]

  [This is an open forum, not the Adobe support, please do not post personal information]

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <===> NOTE DAYS AND TIME

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Serial number and activation support (non - CC)

  http://helpx.Adobe.com/x-productkb/global/Service1.html

• Installation on a Mac Book Pro

  Hello

  My PC crashed, and he had Adobe Photoshop elements on 11. I just bought a MAC Book Pro, and I would like to install elemets again, but just noticed there is no CD or DVD drive. Is there a link that I can use? I always have the serial number of the previous software that I used. Thank you.

  Download Photoshop Elements products | 10, 11, 12, 13

• I got a mac book pro with Yosemite. Today started to ask me to enter in the first series. Uninstalled all the app from adobe and I loggin and install all the app and still the problem

  I got a mac book pro with Yosemite. Today started to ask me to enter in the first series. Uninstalled all the app from adobe and I loggin and install all the app and still the problem. What do I do?

  If you are prompted for a serial number in the creative clouds, see this link:

  https://helpx.Adobe.com/creative-cloud/KB/CCM-prompt-serial-number.html

  Guinot

• I installed Adobe CS6 Design &amp; Web Premium on my Mac Book Pro a few years ago, but repeatedly encountered problems with programs freezing or do not open correctly. It is a students and teachers version so a University identity is required, but I'm

  I installed Adobe CS6 Design & Web Premium on my Mac Book Pro a few years ago, but repeatedly encountered problems with programs freezing or do not open correctly. It is a student and teacher license version so a University identity is required, but I'm no more a student - can I always reinstall it from my academic ID may no longer be valid?

  Erin Elzo as long as serial number has been registered under your account at http://www.adobe.com/ , then you should be able to continue using the software.  You can find details on how to locate your serial number registered to find your serial number fast - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.

• I have LR5 on my iMac. I also have it on my new Mac Book Pro.

  have LR5 on my iMac. I also have it on my new Mac Book Pro. Can I use the same product code?

  Yes.

  Download LR 5.4 Adobe

  http://www.Adobe.com/support/downloads/detail.jsp?ftpID=5740

  Install and enter your serial number.

• LR 4 install not on Mac Book Pro

  LR 4 will not install on Mac Book Pro. System requirements have been met. Installer "fails" contact software manufacturer

  Go to the Adobe website - www.adobe.com.  Go to the download section and download the trial version of the latest version of Lightroom 4 (4.2).  So which installs OK, then use your serial number of every time that you got 4 LR to activate.

• By the end of 2011 Mac Book pro 15 inch battery indicating zero

  I have a 2011 Mac Book Pro (end) retina which really is not used as a laptop display. (always connected)

  Just today, he showed zero percentage battery icon.

  I have reset the SMC and that did not help

  Should I try to disconnect the battery to see if it would help

  Is the battery shot just like that?

  Thanks for the help

  In addition, if the battery needs to be replaced can I do it myself?

  Hello

  The battery may be necessary replacement.

  Check the number of maximum cycle. Instructions here > Determining battery cycle count for Mac notebooks

  http://www.Apple.com/batteries/service-and-recycling/

  You can replace the battery yourself > https://www.ifixit.com/Guide/MacBook+Pro+15-Inch+Unibody+Late+2011+Battery+Repla cement/7511

  But if you have never done this before, I recommend you take your Mac to an Apple Store. You can make a reservation in advance at a Genius Bar.

• how much is a new battery for mac book pro 13 inch?

  How is a battery for mac book pro 13 inch?

  depends on MacBook Pro you have and if you buy oem or aftermarket. An oem battery is the way to go, after that the markets are proved to be unreliable. I'm to do it the good way market if its all the same. But I have a few experiences where they don't acknowledge or reload. And ive seen have poor performance and cost of life. OEM go from 30ish used with a number low cycle to 70

• How to connect a microphone to capacitor for Mac Book Pro?

  Hi all

  After recently to buy a NW-700 Neewer and set up, I plugged it on my which seems to me to be a model 2012 or 2013 the Mac Book Pro, only to see that he has been received as headphones and tab out of my sound preferences. I don't think that there is something wrong with the microphone as I had also bought and hooked to a phantom power source. After you pass the cables through the power source, I plugged my card TRS in a TRS FosPower additional to the PLUG adapter, knowing that Mac does not accept audio TRS jacks. And then after all that, I plugged this card into my computer which was accepted as a helmet instead of a microphone.

  I have a theory, that the FosPower adapter converts only the input signals and the computer then thought of as a helmet. What do you think?

  Here are some pictures to help.

  The Mic

  

  Phantom power

  

  Adapter

  

  Before the plug-in

  

  Once the adapter is connected

  

  

  Thanks for your help,

  G

  Hi garretthelp,

  I understand that you are having trouble to get your microphone Neewer NW-700 to be recognized as a device on your MacBook Pro.  If the TRS FosPower to adapter PLUG does not work for you, have you tried using an audio interface with standard XLR connections for your audio configuration?    Which application you use on your Mac?  No matter what settings are you using in the Mac system preferences should also be done in the settings of the audio application as well.  I will include information for GarageBand below for your reference.

  I found the Web site of the manufacturer of your product and enter the SKU for the microphone Support page, but they do not have a manual available at the moment.  So, if using an interface standard audio does not resolve the problem, you will need to contact Neewer for more information.

  Plug in a microphone

  You can connect a microphone to your computer to record your voice, an acoustic instrument or any other sound on an audio track in GarageBand. You can connect a microphone to the port of audio input of your computer, a USB port, or, for better audio, an audio interface connected to a FireWire or USB port on your computer. You can also use your computer's built-in microphone to record sound.

  After you connect a microphone, you choose the input source for the range that you want to save in, and then turn eventually followed. Monitoring allows you to hear you play so you can hear the part you want to record as well as the rest of the project.

  Connect a microphone to your computer

  Do one of the following:

  • If you use your computer's built-in microphone, select the Microphone as the source of entry into GarageBand > Preferences > Audio > devices.

  • Plug the microphone on your computer audio input port (if she has a), then choose integrated input as input source of the track.

    

• Connect a USB microphone to a USB port on your computer. Choose the USB microphone as input source of the track.

  

• Connect an audio interface to a USB or FireWire port, then a microphone for the audio interface for recording.

  

• Connect a console audio mixer or console in an audio interface connected to your computer.

Set the input for a microphone source

1. Select the audio track.

2. Click the Smart Controls to open the smart controls, and then click the Inspector button of .

3. In the recording settings section, choose one of the following on the shortcut menu of the entry:

   • If you use your computer's built-in microphone, choose the built-in Microphone.

   • If you use a microphone connected to your computer's audio input port, choose built-in input.

     If the integrated entry does not appear in the menu, choose GarageBand > Preferences, click Audio / MIDI, then choose enter integrated in the context menu of the Audio input.

   • If you use a microphone connected to a USB port, select the microphone.

   • If you use a microphone connected to an audio interface, choose the number of the channel for the microphone.

     If channels audio interface do not appear in the menu, choose GarageBand > Preferences, click Audio / MIDI, then choose the audio interface in the context menu of the Audio input.

   Make sure the format matches the microphone or instrument. Choose a mono for monophonic instruments (with a single channel), then a stereo input to stereo devices (with a pair of channels).

4. Drag the recording level slider to change the level of input to the sound source volume.

   If the recording level slider is dimmed, you cannot change the volume of entry in GarageBand. In this case, use the volume control on the unit.

Take care

• What is the battery life expected to a new stack in a Mac Book Pro?

  What is the battery life expected to a new stack in a Mac Book Pro?  I am running OS X El Capitan10.11.3

  I just had my battery replaced, and today, I looked at that and I got 7 1/2 hours on a charge.  This doesn't seem much.

  Apple announced 8-9 hours on the 15 "MacBook Pro 2010. This is an extremely optimistic number in light, ideal operating conditions.

  Your 7.5 hours is fine.

• How can I transfer the Adobe products (Photoshop, Lightroom, Dreamweaver) of an old Mac Book Pro for a new?

  I just bought a new Mac Book Pro and transferred all my files and programs from my old computer to the new. Among the programs were Photoshop CS5, Lightroom CS5 and Dream Weaver CS6. According to the license agreement, I cannot use these programs on a computer. How do I UN-titles or remove them from my old computer and re-register on the new?

  Your license allows you to have two facilities enabled, so you should be able to keep the original intact installation and use it as a backup if you wish.  If not then the minimum you need to do is turn it off by opening one of the applications and selecting Help-> Deactivate

  You are more likely to have a problem with is by transferring an installation from one machine to the other.  He rarely works with Adobe products.  You must install using the installation files and serial numbers.

  CS5 - http://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html

  CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html