Server 2008 R2 and SQL 2008 SP1

Similar Questions

• How to change SQL Server 8.00.760 to SQL server 2008 SP1 on a Server Win 2003 SP2 SE?

  Looking to upgrade SQL Server 8.00.760 (SQL Server 2000/MSDE 2) TO SQL server 2008 SP1 or later version (or SQL Server 2005 SP3 or later) on a Win Server 2003 SE SP2 required to upgrade to the latest version of a software management AV.  A detailed procedure or links would be appreciated.  WIN 2003 server is not connected to the internet.  Thank you.

  Please repost your request in one of the most appropriate Windows Server Forums.  Thank you!

• Query for windows small business server 2008 SP1

  Hello

  I have windows small business Server 2008 SP1, I am installing the additional DC for windows small business server 2008 on another server, I gave the DC ip addr as 192.168.1.2 subnet 255.255.255.0 Gateway 192.168.1.1 and 192.168.1.2 dns. On another server where I am trying to install AD DC 192.168.1.3 ip subnet 255.255.255.0 Gateway 192.168.1.1 192.168.1.2 dns... By running the dcpromo and the replication active directory, the installation is in error during replication... the error is

  Active directory could not install,

  Replication failed to allocate memory.

  cmd prompt nslookup also displays the server ip and domain name. Then any body tell me, if we can install AD DC for small business server 2008, and how is this replication error could not allocate memory. How to solve this error.

  Your comments will be appreciated

  Hello

  I have windows small business Server 2008 SP1, I am installing the additional DC for windows small business server 2008 on another server, I gave the DC ip addr as 192.168.1.2 subnet 255.255.255.0 Gateway 192.168.1.1 and 192.168.1.2 dns. On another server where I am trying to install AD DC 192.168.1.3 ip subnet 255.255.255.0 Gateway 192.168.1.1 192.168.1.2 dns... By running the dcpromo and the replication active directory, the installation is in error during replication... the error is

  Active directory could not install,

  Replication failed to allocate memory.

  cmd prompt nslookup also displays the server ip and domain name. Then any body tell me, if we can install AD DC for small business server 2008, and how is this replication error could not allocate memory. How to solve this error.

  Your comments will be appreciated

  Hey AAAAAAAAAAAAtif

  It's an instance of vista installation

  Try the link below sbs forum

  This forum is for General Discussions on Small Business Server 2008, R2, 2003, 2003 SP1, 2003 and earlier versions. Gateway available NNTP Client if you wish to participate via a Newsgroup Reader. Read the sticky at the top of the forum Post.

  http://social.technet.Microsoft.com/forums/en/smallbusinessserver/threads

  Walter, the time zone traveller

• SQL * Server 2008 SP1 applied but still tries to download and install from Windows Update

  I installed SQL * Server Express 2008 portable and applied the SP1 update. This shows that when we look at the programs/updates from Control Panel and management console confirms the 10.1.2531 version is running.

  Whenever I use windows update service pack is listed as needing to download / install - the same KB968369 is given as a reference. I ran it a couple of times, but the update is indicated as unique every time.

  Any ideas how to solve this problem?

  Thank you

  Colin

  Try the repost in the SQL Server Setup & Upgrade forum for appropriate assistance, Colin: http://social.msdn.microsoft.com/forums/en-US/sqlsetupandupgrade/threads/

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Update error - SQL Server 2008 SP1

  Hello

  I am using Windows 7 Ultimate 64 bit

  I installed VS2010 Trail, then I installed SQL Server Express Studio

  My Windows shows update there is a update for SQl Server 2008 Service Pack 1

  But when I try to install this update

  I get an error like below

  Error Code 84 B 20001

  a few times with error below

  WindowsUpdate_20000001 WindowsUpdate_dt000

  What should I do to fix this

  Thank you

  Harsha

  RedandBlue,
  The link Shalini gave about the clean boot procedure provides detailed instructions on the use of MSConfig.  I think you have just misunderstood the steps listed above.  When you open msconfig, click on the button beside selective startup. Then uncheck (clear) the box "Load system services" and "Load Startup items" and then apply and restart.

  If you have not seen this thread , you can read through it, because it covers the same error you see. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Server 2008 SP1: The C:\Windows\winsxs folder consuming 15Gb (!) of disk space.

  It's really annoying because at the time of installation, we thought that 25 GB should be plenty for the drive that contains the operating system only! Now we ran out of disk space on C:! (The only software installed on top of Windows is SQLServer 2008...). We organize this server and it's VERY expensive to get the C drive extended by our provider. So I'm looking for a solution urgently... and I can't seem to find it.

  Three questions:

  1. is there a tool offered by microsoft to reduce the size of this folder?

  2. upgrade to Windows 2008 R2 reduces disk space on C:\Windows\winsxs. In this way we can (temporarily) expand the capacity, perform the upgrade and return to 25 GB.

  3 - is Windows 2008 R2 also having this winsxs 'feature '?

  Kind regards

  Merijn

  Here is the Vista Forums.

  http://www.Microsoft.com/windowsserver2008/en/us/forums-blogs.aspx

  Above link is Server 2008 Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• SQL Server Management Studio and SQL Azure

  Hello:

  I want to test SQL Azure - before be recommended to a customer.

  The last time I performed a test of SQL Azure - I couldn't use SQL Server Management Studio to:

  • Create tables with table designer
  • Add - or remove - the columns of the tables with table designer
  • Create diagrams

  You know, the basic things you need to do to build, manage a database. Then... I told my customer that they would be better to stay with SQL Server, until Microsoft up to speed with SSMS.

  Now I heard the new SSMS versions allow the use of designer tables and diagrams with SQL Azure. My questions are:

  1. Is it true that newer versions of SSMS for use of the table Design and diagramming with SQL Azure?
  2. If Yes, what version of SSMS and what version of SQL Azure?

  Thanks in advance - MM

  Hello

  Post your request in the forum for better support.

  SQL Azure

  Thank you.

• Services for SQL Server 2008 Express are not listed. No error message when installing.

  Hello community,

  I installed SQL Server Express 2008 (without SP but with SQL Management Studio) on a Windows XP 2002 SP3 32-bit. Used to install operating system user is a member of the administrator group
  The SQLManagementStudio_x86_ENU.exe installation file was downloaded from http://www.microsoft.com/en-us/download/details.aspx?id=7593 . Express Edition has been selected during the installation. All prior checks have been adopted (with the exception of 1 and 2 does not apply). I chose this version with management tools that I will need them for a quick change at a later stage.

  Then I installed on SQLServer2008SP1-KB968369 - x 86 - ENU.exe, which is the general Service Pack 1 for SQL Server 2008, which has been downloaded from http://www.microsoft.com/en-us/download/details.aspx?id=20302. All prior checks have been adopted (with the exception of 1 and 2 does not apply). The installation window title was SQL Server Service Pack 1. In the step select the components, I had no other choice than the selection of shared components / basic management tools. To the right of the screen, it says "Express with Advanced Services" edition / Patch level: 10.0.1600.22

  It ended with a message saying that your SQL Server 2008 upgrade completed successfully. The information contained in the mentioned log at the end of the installation displays no error message.

  Here is the troubled part

  Then I tried to install a different SW that has SQL Server 2008 SP1 as a sine qua non. What he did not. Then I rebooted and wanted to see what version was indeed installed.

  Control Panel - Add/Remove software : 5 entries, Microsoft SQL Server 2005 backward compatibility / Microsoft SQL Server 2008 / Microsoft SQL Server 2008 Native Client / Microsoft SQL Server 2008 political / setup of Microsoft SQL Server 2008 supports files (no mention of SP1, can this be correct?)
  Control Panel - Services : there is no service of any kind that has SQL Server on its behalf. This is very probably a major problem, a google for that advice that there should be more of them
  Regedit - HKLM - SW-MS - MS SQL Server - 100 - Bootstrap Release - current Version : 10.1.2531.0 (Diffferent than SP1, think?)
  Cmd - osql-u its Pei : named pipes provider: could not open a connection to SQL Server [2]. / Login timeout expired

  I reboot several times since then.
  I don't know the status of the installation before installing the SP1, I knew I'd need SP1 anyway.

  I suppose that services SQL Server issue resolved would be a big step forward.

  Anyone has an idea on what I could check?

  Thanks in advance, Laurent

  SUPPORT IS LOCATED IN THE SQL SERVER FORUM:
  http://social.msdn.Microsoft.com/forums/en/category/SQLServer

• For TMS Win2008 Server and SQL Server client access licenses?

  Where, I read that the TMSXE interface requires a CAL on the Exchange Server.  What I can't seem to locate is all information about client access licenses how are required to Win2008 R2 Server Standard Edition and SQL Server 2008 R2 Standard.  Is there a reference document that I'm missing with this information.  It seems that according to Microsofts definitions, you might need a CAL by user device and/or managed web that connects to the web interface.

  Can someone clarify the situation?

  Hello world

  So should put the closure of this thread, I have now clarified what follows when it comes to TMS and MS licenses:

  Users and administrators to connect to TMS authenticate AD, the server that hosts the TMS must be allowed to support authenticated connections. Don't authenticate TMS Managed/configure with AD devices via the web server. As a result, and as managed devices does not authenticate against IIS with AD login, these types of connections don't require licenses. Only users who connect to the Web site would be.

  The issue of Exchange and SQL are similar, that is, authenticated connections how are made?

  Of MSDS, all connections to SQL server use the same authenticated account, by default uses a SQL login.  Web site users are not authenticated to SQL Server. Therefore, and in the case of an external SQL Server, this would be equal to one.

  When communicating with Exchange, all connections are through a unique service account. Created for managed systems the mailboxes are not connected by users or MSDS for normal operation. As a result, and as with an external SQL Server, this would be also equal to one.

  Hope that clarifies completely now

  Rgds,

  Dale

• Anyone know when the SP1 for SQL Server 2008 R2 is available

  We have a problem that is related to parallel processing (MAXDOP) and were informed that this would be solved in SP1 for SQL Server 2008 R2.  Can anyone provide indications as to when that is being released as a download?

  You the problem are solved better post on the TechNet forum: http://social.technet.microsoft.com/Forums/en-US/w7itproinstall/threads

  J W Stuart: http://www.pagestart.com

• Using Reporting SERVICES report server cannot open a connection to the report server database in SQL server 2008 R2 sp1

  Hello

  I'm running Reporting SERVICES Version 2007.0100.1600.022 ((SQL_PreRelease). 080709-1414 in Visual Studio 2008 with Microsoft SQL Server 2008 R2 Express Edition with Advanced Services (64-bit) on Windows NT 6.1 SP1.)
  Everything seems to work fine except that I can't deploy: "the report server cannot open a connection to the report server database."
  Connection test ReportServer as OK in the Configuration service report manager and Visual Studio. Run reports in Visual Studio against ReportServer and my other databases.  Deployment fails on a report of VM. Remote access is enabled in the firewall, pipes is enabled in configuration Manager SQL server, the permissions for all access in Windows.
  The error in the log file of report Service:
  Library! WindowsService_1! 12ac! 09/23/2012-21: 05:12: e ERROR: ServiceStartThread: Exception caught during the startup of service. Error: Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerDatabaseUnavailableException: the report server cannot open a connection to the report server database. A connection to the database is required for all applications and treatment. ---> System.Data.SqlClient.SqlException: a network-related or instance-specific error all by establishing a connection to SQL Server. The server is not found or inaccessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - error Search Server/Instance specified)
  Any ideas?
  Thank you.
  -Phil

  Just, I solved the problem I had.

  It turns out, there, there were two questions... first concealing the second.

  SQL Web browser has not been activated.  solution: in properties SQL server configuration manager, transformed the startup to automatic mode and activated the service.

  Microsoft Visual Studio project property targetdatasourcefolder had a server name that precedes the name of the folder. Removed the name of the server.  This works.

  Everything unfolds right now.

• Expiration date and time in SQL server 2008 Enterprise Edition

  Please tell me the exact expiration Date and time in SQL Server 2008 Enterprise, and 2008R2 edition?

  Please tell me the exact expiration Date and time in SQL Server 2008 Enterprise, and 2008R2 edition?

  Hello

  Please post this question in the SQL Server forum.

  Category of the SQL Server:

  http://social.technet.Microsoft.com/forums/en-us/category/SQLServer

  Concerning

• Windows server 2003 and SQL server 2008

  Is
  SQL Server 2008 Standard Edition for small business Compatible with SBS 2003 Standard edition? Try SQL 2000 and he was not.
  Thank you
  Michael Coleman
  ADDA USA
  Fr. resp.
  Orange, Ca 92867.
  714-674-7920.

  Hi mikecoleman_us,

  Please see article about your question:

  http://www.Microsoft.com/sqlserver/2008/en/us/small-business.aspx

  If you still need assistance, I suggest posting your question in the following forum:

  http://social.technet.Microsoft.com/forums/en-us/category/SQLServer

  I hope this helps!

• compatibility of Windows 7 Home Premium with Visual Studio 2010, Visual Studio 2012, Sql Server 2008 and can be Sql Sever 2012.

  Hi, I'm going to buy a new laptop in which I get Windows 7 Home Premium. I'm going to use MS Visual Studio 2010, Visual Studio 2012, Sql Server 2008 and can be Sql Sever 2012. I'll use the other tools of development also. I just want to know fact these races of software in this operating system.

  It's the operating system have a compatibility issue with these software or other tools of development.

  Best place to look is the MS site for these products and consider the requirements specified

• SQL Server 2008 R2 CPU and RAM requirement for HFM/FDM

  Summary of the problem

  ---------------------------------------------------

  Requirement of SQL Server 2008 R2 for HFM/FDM

  Description of the problem

  ---------------------------------------------------

  We install a new EPM 11.1.2.3 - HFM and FDM on one server that hosts the services of the Foundation and FR. Our question is on the CPU and Ram needed on the SQL Server. We have 2 users with 4 GB of data, but we have to get the good performance of SQL server.

  Please provide me with a white paper link or just tell me what it takes.

  Thanks in advance.

  4 CPUS and 16 GB of RAM should be more than enough to support your needs

• Windows Server 2008 R2 Enterprise Edition x 64 + SQL Server 2008 STD SP1 on paravirtualized VMDK = crashes?

  Hi all

  So far, I have a problemin of deployment with SQL Server 2008 STD SP1 Windows Server 2008 R2 Enterprise x 64 installed on Paravirtualized VMDK for best performance.

  but when I run SQL Server Mgmt. Studio to browse the database inside the paravirtualized disk blocks can always 100%?

  I'm also unable to perform a backup of this virtual machine using VCB:

  Creating snapshot of the Virtual Machine

  * Cannot

  create a suspended because the create snapshot snapshot operation

  timed for the outfit out of e/s in virtual jelly

  machine *.

  No chance in this guys case?

  Kind regards

  AWT

  My Installation of SP1 SQL 2008 hangs on the audit of the rule on a Windows Server 2008 R2 on vSphere ESX 4.1. So, I changed my SCSI controllers type of ' paravirtual' LSI SAS parallel, then it works fine.»