Server file throwing error include

Similar Questions

• Two updates - for "SQL Server 2005 Service Pack 3 'and 'Power Poin 2007", throwing errors when installing Code FF Code 80070663

  Original title: two updates - for "SQL Server 2005 Service Pack 3 'and 'Power Poin 2007", throwing errors during installation

  For several months, one day each on ' Windows Vista Bussiness "and"MS Office Professional 2007' install.

  Relevant updates are:-

  1 security Update for SQL Server 2005 Service Pack 3 (KB2494113)

  2 update for Microsoft Office PowerPoint 2007 (KB2535818)

  The lifted message when the update is "patch installer has stopped working".

  Finally, the "errors:" are: -.

  Code FF  Windows Update has encountered an unknown error

  Code 80070663  Windows Update has encountered an unknown error

  I tried nmerous solutions suggested on the forums but nothing helped.

  Please suggest what you please!

  Hello

  Have what troubleshooting steps you tried?

  Answer to the above question could help us by providing the best troubleshooting steps.
  However, visit the link below to download and install the update of security for Microsoft Office PowerPoint 2007 (KB2535818) update.
  http://www.Microsoft.com/download/en/details.aspx?ID=24723

• Partition to opt on fabric interconnect an includes file system errors

  After a downgrade from painful recovery (failed upgrade from 2.2.3d to 2.2.6d) everything works again, but I see

  Partition to opt on fabric interconnect an includes file system errors (see attachment)
  

  To remedy this unpleasant error advice are appreciated.

  Hello Walter.

  The bug that you run is;

  https://Tools.Cisco.com/bugsearch/bug/CSCus79160/?reffering_site=dumpcr

  I stumbled upon this problem in the past, the TAC will load the debugging plugin and just check a few blocks. Anika, a system launch is another fix but it is a longer process, if you open a TAC case don't forget to mention the bug above and they can try this work around first.

  I would like to know if you have any other questions or need help.

  Qiese Sa'di

• openDataOutputStream() file system error (12)

  the code online "outstream = fileconn.openDataOutputStream (); (complete code below) throws an exception with the message "file system (12) error? the funny thing is that the exception is not thrown the first time the WriteXml(); is called that is convened first in each lifetime of the application, the write file completes successfully, but all subsequent calls after the first failure and throw this file system error? our application works on first reading an XML and then writing a (WriteXml()) if the user presses Save (which works first time), but if the user presses record once again, writing doesn't work anymore. When I close the application and then restart it, the first re-record works very well, but not the following? any ideas how to solve this problem? Cheers.

  import javax.microedition.io.Connector;
  import javax.microedition.io.file.FileConnection;
  import java.io.DataInputStream;
  import java.io.DataOutputStream;
  import net.rim.device.api.ui.component.Dialog;
  import org.kxml2.io.KXmlParser;
  import org.kxml2.io.KXmlSerializer;
  import org.kxml2.kdom.Document;
  import org.kxml2.kdom.Element;
  import org.kxml2.kdom.Node;
  
  public class Filer {
  
  private String filepath = "file:///SDCard/Blackberry/TelliT.xml";
      private String ip = "192.168.1.1";
      private String port = "80";
  
  public void WriteXml() {
  
  try {
              FileConnection fileconn = (FileConnection) Connector.open(filepath,
                      Connector.READ_WRITE);
              if (!fileconn.exists()) {
                  fileconn.create();
              }
  
              Document doc = new Document();
              Element root = doc.createElement("", "TelliT");
              Element server = doc.createElement("", "server");
  
              Element ipelem = doc.createElement("", "ip");
              ipelem.addChild(Node.TEXT, ip);
  
              Element portelem = doc.createElement("", "port");
              portelem.addChild(Node.TEXT, port);
  
              server.addChild(Node.ELEMENT, ipelem);
              server.addChild(Node.ELEMENT, portelem);
  
              root.addChild(Node.ELEMENT, server);
              doc.addChild(Node.ELEMENT, root);
  
              DataOutputStream outstream;
  
              outstream = fileconn.openDataOutputStream();
              KXmlSerializer serializer = new KXmlSerializer();
              serializer.setOutput(outstream, "UTF-8");
              doc.write(serializer);
              fileconn.close();
  
          } catch (Exception e) {
              Dialog.alert("Data could not be saved: " + e.getMessage());
          }
  
  }
  
  }
  

  You must close the stream of output as well as the connection of files.

  Note a minor - there is no reason to use a DataOutputStream instead of simply an OutputStream. Outstream-an OutputStream to change and change the call to fileconn.openOutputStream (); It will save a little bit of overhead.

• Creation of stand-alone executable file with similar library files without errors of link

  I have an Executive Test that is run on two different test systems. Each stand has another card ARINC429. The old card use 429dll32.lib, while the most recent map use pci429.lib. Test Exec code only loads a single library file (using LoadExternalModule) depending on what the test bench has the card, but since there are many similar functions in both, ICB does not test Exec be built as a stand-alone executable.

  In CVI 5.0.1 I opens the "Create stand-alone executable file" and select "add files to the executable. I check the 429dll32.lib and the pci429.lib to include in the creation of executable, and then click 'OK '. When I click 'OK' to create the executable I have several link errors, one for each function both .lib files have in common.

  Is it possible for each of these .lib files to be included in the compilation without having to create two separate executables?

  eatmontr:

  If you use LoadExternalModule(), you need not include the .lib files in the Executive test project.  Refer to the CVI for LoadExternalModule help.

  Here's the info on the help:

  LoadExternalModule loads an external object module file. You need not list the file in your project or loaded as a module of an instrument.

  The file may be an object (.obj) file, a library file (.lib) or a library (.lib) import DLL.

  Here are a few articles to OR who can help.

  To access the plug-ins with CVI (with sample program) http://zone.ni.com/devzone/cda/epd/p/id/133

  How do I call dll if I have two functions with the same named in two different dll? http://digital.NI.com/public.nsf/allkb/5299ED8D43F3B5FE852563BF0056EBA6

• Reviews for .dll file loading error when starting the laptop

  After removing an infection from malware Thinkpoint of my laptop and reconstituted at almost normal speed, a notice of a .dll file loading error appears while booting.  What are the options to eliminate that?

  This isn't a lot of information to go, but it's because forums MS Answers does not prompt for information, when a new question is asked.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  Read this and see if it looks like your question and if it is not, let us know exactly what you see and we will always fix it:

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.

  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information
  .  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• Cannot copy file names that include the slashes, commas, etc.

  Hello.

  I am trying to copy files from my old Mac G5 tower (about 10 years).  But my copy fails with an error message when trying to copy a file name that includes a special character.  Is there a way to get around this?

  To clarify: when it runs in a file with special characters, it gives me the error message that the file name is too long or contains special characters.  The problem is that when I click 'OK' to confirm the error (not), the copy is aborted.

  Any ideas?

  Thank you!

  E. -.

  Oh!  Well I guess you will have to wait for someone with a Mac experience for you then help.  I do not have one.  I'm sorry.

  BTW, you should post your question on Apple/Mac forum.  Many experienced people who can help you.   Good luck.  :-)

• The error message is im like error: 0xC004D401 Description: the security processor reported a system file mismatch error. After doing the update of windows Vista.

  There is a problem with your license so notifications will no longer appear
  You will no longer receive communications, including those concerning your license or activation.
  To try and fix this problem click on one of the links below.
  Error: 0xC004D401
  Description:
  The security processor reported a system file mismatch error.

  Vista Service Pack 2 (SP2) is installed?

  ==========================

  1. Download this diagnostic tool, save it to your desktop, then right click on the saved file and select run as administrator to run the utility: http://go.microsoft.com/fwlink/?linkid=56062

  2. once the race completed, click the continue button, and then click the copy button (on the Clipboard).

  Note: You can open a new file in Notepad, paste the contents of the Clipboard in it & keep for future reference.

  3. start your own, new thread in the following Microsoft Genuine Advantage forum and paste the results of the diagnosis of MGA tool in your post, and a clear description of your problem:

  http://social.Microsoft.com/forums/en-us/genuinevista/threads

  4 Troubleshooting specialist will analyze the data and recommend an appropriate solution.

• IO error: C:\Users\Shravan\AppData\Local\Temp\widgetGen.13585025011375276733210. tmp\sampleapp (the system cannot find the file specified) [ERROR] CAP exception has occurred

  C:\Program search in Motion\BlackBerry 2.3.1.5 > bbwp SDK WebWorks
  C:\apps\sampleapp.zip o C:\apps\Output2
  [INFO] Parsing of the command line options
  [INFO] Bbwp.properties analysis
  [INFO] Validation of archive application
  [INFO] The analysis of config.xml
  [WARNING] Cannot find an element of
  [INFO] The application of filling source
  [INFO] Compilation of application BlackBerry WebWorks
  IO error: C:\Users\Shravan\AppData\Local\Temp\widgetGen.13585025011375276733210
  . tmp\sampleapp (the system cannot find the file specified)
  [ERROR] CAP exception has occurred

   

   

   

  How do I solve this problem

  The tools are not compatible with JDK7. You need to install JDK6 and it must be the 32-bit version.

  If you have several versions of the JDK, you can modify bbwp.properties in the subfolder bin of your SDK WebWorks to include the following text:

  C:\Program Files (x86)\Java\jdk1.6.0_31

   

  
  You would update the JDK version to match your own, but note that this is the SEO Program Files (x 86); the path 32-bit installations. This way you can have several JDK if you need, but the command bbwp must reference the appropriate JDK.

  In short, he must be JDK6 and it must be 32-bit.

• Backup has encountered a problem during backup of the C:\windows\system32\config\systemprofile\Desktop\music file. Error: (System does not find the specified path. (0 x 80070003))

  I had to uninstall iTunes a few months ago and successfully re-installed, but part of my music was missing.   At one point, following the instructions on a thread on the forums Apple or Microsoft, I saved my music library on the desktop. Since then, I do not have a library of music on the desktop file.  In my looooooong hours trying to fix things, I do not know if I deleted it or what.

  Now, I get the message:

  "Backup has encountered a problem during backup of the C:\windows\system32\config\systemprofile\Desktop\music file. Error: (System does not find the specified path. (0 x 8007003)) "whenever I have backup my computer.

  As I understand it, that does not affect really any other files, they rely on the spot (I think), but

  HOW CAN I GET RID OF THIS MESSAGE? or what is the cause?  Of course, I could use help in simple English, step by step, as I'm not very techno...

  Thank you!!!

  Try to be...

  SereneJulie

  Hi serene,

  Thanks for posting your query on the Microsoft Community.

  As indicated by the error, this problem appears, when these files/libraries that are saved automatically are not present on your computer. I suggest you to follow the steps below and check, if it can help solve the problem.

  • Create missing files that are listed in the error message.
  • Exclude files from the files to backup in the backup settings and then include these files in their original location. To exclude folders in other communities and to include these files in the original location, follow these steps:
    1. In Control Panel, open backup and restore.
    2. In the section back up , click change settings.
    3. In the dialog box Configure the backup , click Next.
    4. In the dialog box that you want to save , click Let me choose, and then click Next.
    5. Expand data files, library, expand additional locations, and then click to clear the check boxes folder AppData, Contactsand Research .
    6. Expand computers, expand the element of your system drive (for example, expand Local disk (c)), expand users, , and then click to select the checkboxes AppData, Contactsand Research if they exist.
    7. Click Next, and then click Save settings and exit.
    8. Backup and restore, click back up now to perform a new backup. The backup operation must complete without errors.

  If the problem persists, I suggest you follow the steps in the following article for troubleshooting backup problems.

  Windows backup or restore 0 x 80070001, 0 x 81000037 or 0 x 80070003 errors

  http://support.Microsoft.com/kb/973455/en-us

  Come back and let us know the State of the question, we will be happy to help you. We, at tender Microsoft to excellence.

• Download Manager "Server returned an Error" when you try to reinstall SQL Server 2008 R2 180-day free trial

  I'm trying to install the trial version of SQL Server 2008 R2 on my computer for the second time within the period of 180 days, because last time it has installed without Analysis Services, I needed. The first time it installed fine.

  I do not get a specific error message - once the Download Manager comes to extract the SQLFULL_x86_ENU.exe file, a box opens and says "the server returned an error. Would you like to try again? "and continues to appear if I try again and block the Download Manager.

  I have Windows 7 and a 32-bit computer. Is the question the fact that it is the second time that I install, or something else? I would have thought that the error would have been more accurate, if that were the case. If so, what can I do to get the software installed on my machine for the rest of the trial period?

  Thanks please help!

  Hello RobPeterscheck,

  If this is your 2nd time to install, did you uninstall the original SQL version until you tried to reinstall?

  You can temporarily disable the download manager in Internet Explorer and then activate once you have installed the download you want. This will help to highlight if Download Manager is the problem.
  Log on with an account that has privileges Administrativer.
  Open Internet Explorer.

  Click on 'Tools' on 'Internet Options'.
  Go to the Security tab.
  Go to custom level.
  Go to the downloads Section.
  Find the file downloads tab and disable the option button.
  Click OK.

  Restart to save the changes.

  Please reply back and let us know if this can help.

  Sincerely,

  Marilyn

• OBIEE 11 g, Nq server file system - is quickly filling up

  Hello

  We must work on the project of Migration OBIEE 10 g and 11g. Reports that are run very well in 10g are fill the Nq 11 g and error causing server file system.

  Configuration DB - OBIEE 10 g - current 11i.

  New Configuration - OBIEE 11g - 12 DB

  QL Server space is same in both configurations. and the report is exactly the same in the environment.

  There is a report that works very well in 10g is now generation huge file to the NQ server to 11g. If several users are running this report, with different parameters, it server NQ fills up quickly and causes the error.

  We have checked logical queries, they are exactly even.

  Physics questions, is slightly different but the result is exactly the same.

  Ideas or guidelines to debug this problem.

  Kind regards

  GHE.

  The solution was about length of database column.

• Why multiple selection in parameter throwing error BI publisher 11g?

  Hi all, I have under SQL statement with parameters.

  Select 'TABLE_A '. "" s_number "as"s_number. "

  'TABLE_A '. "" SM "like"sm. "

  'TABLE_A '. "" Loc "as"loc"

  'TABLE_A '. "" Co "as"co. "

  'TABLE_A '. "" s "as"dry. "

  'TABLE_A '. "" m_days "as"m_days. "

  'TABLE_A '. "" b_time "as"b_time. "

  'TABLE_A '. "" e_time "as"e_time. "

  'TABLE_A '. "' build ' as"build. "

  'TABLE_A '. "" RM "as"rm"

  'TABLE_A '. "" aid_credits "as"aid_credits. "

  "TABLE_D. "" Co "as"co_1. "

  "TABLE_D. "" co_des "as"co_des. "

  "TABLE_D. "" pre_co_des "as"pre_co_des. "

  "TABLE_D. "" cont_cou_des "as"cont_cou_des. "

  "TABLE_D. "' end_sm ' as 'end_sm '.

  "St." » « « « dbo ». » TABLE_A' 'TABLE_A '.

  "Left outer join"st. " """dbo"."" TABLE_D""TABLE_D.

  on ('TABLE_A'. "Co"= "TABLE_D". ("" Co ")

  where ('TABLE_A'. ("" in(:PSM) SM "or: PSM is null)

  and ('TABLE_A'. ("' in(:PLOC) Loc" or: PLOP is null)

  and ('TABLE_A'. ("" in(:PCO) Co "or: BCP is null) and"TABLE_D. "" end_sm "="

  order by 'TABLE_A '. "' s_number ' ASC

  I defined in the parameter section

  multiple selection is enabled

  can select all is selected

  NULL value last selected for all parameters: PSM, PLOP, BCP

  now my question is that if I select more than one value in the settings it throws error «an error has occurred on xml data recovery»

  oracle.xdo.XDOException: java.sql.SQLException: type [Hyperion] [SQLServer JDBC Driver] [SQL Server] non Boolean expression specified in a context where a condition is expected, near ', '.

  Please help me what is?

  Kind regards

  Sam

  For this reason, the error is: PSM is null,: PLOP is null and: BCP is null.

  Because it is possible to assign multiple values to a variable to link plain. You must manage this in different ways.

  If she is Oracle DB - decode(:PCO,null,columnxxx,'dummy')

• After effects error: the Photoshop file format error (- 1). (45: 35)

  After Effects worked PERFECTLY for me earlier today. Now, he won't cooperate.
  I only use AE to correct the colors and the rendering/export short sequences to use first or Final Cut...
  Im working with DNG that have been converted from MLV files, sequences (I use the video hack gross magic lantern on a 5 dm 3).

  
  Out of nowhere, whenever I try to import any DNG sequences, sequences of CR2, CR2 or DNG files, I get this error...

  After effects error: the Photoshop file format error (- 1). (45: 35)

  
  No matter which set of DNGS I open gives me error. Ive tried re-conversion of several files MLV (perhaps there were corrupt officials?) and their import again, but no luck.

  Ive tried uninstalling AE and re installation with no luck.
  I tried the updated Camera Raw to the latest version with no luck too. (Adobe - Adobe Camera Raw and DNG Converter: for Macintosh)

  
  Does anyone know why AE would simply stop working with my DNG sequences all of a sudden?
  It makes absolutely no sense to me.

  (Running on a macbook pro end 2013)

  Well, after 4 hours of trying to understand this point, I did.
  Including use of that Camera Raw 9.5 it won't work with AE. 9.1 will alone.
  Still doesn't explain why it has just stopped working in the first place well...

• vCenter Server displays the error message: unable to connect to the host

  vCenter Server displays the error message: unable to connect to the host

  Symptoms

  • vCenter Server cannot connect to a host when you perform operations such as:

  •

  o Storage vMotion

  o cold migration

  o cloning a virtual machine

  o the model deployment

  • Newspapers vpxd that contains an entry similar to:

  [2009-06-04 19:27:16.326 error "App" 4444] [VpxdInvtHost] IP address change for 10.223.122.143 to 10.223.127.197 unhandled, verification of the SSL certificate is not enabled.

  • You see errors similar to:

  Unable to connect to the host o

  o [2009-06-04 19:27:09.952 'Libs' 3902384 WARNING] [NFC ERROR] NfcNewAuthdConnectionEx: unable to connect to peer (numRetries = 2). Error: Unable to connect to the host 10.223.122.143: connection timed out

  • vCenter Server shows the VMS as being disconnected then connected.

  Hello

  Resolution

  Cause

  This problem can occur if an ESX host's IP address is changed while being managed by vCenter Server.

  Check the cause

  To check the cause of the problem:

  1. Log in as root to the ESX host using a SSH client.
  1. In the file etc/opt/vmware/vpxa/vpxa.cfg, find the IP address of the host. The entry looks like:

     
     10.21.48.121
     

     Note: for more information about editing the files, see installation in VMware ESX configuration files (1017022).

  Troubleshooting

  If the IP address is incorrect, perform the following steps in order. If the operation does not resolve the problem, continue to the next step. Don't skip a step.

  1. Disconnect and then reconnect the host:
  1. Right click on the ESX host in vCenter Server and click Disconnect.
  1. Reconnect the ESX host in vCenter Server.
  1. Restart the VirtualCenter agent on the ESX host:
  1. Stop the service of vpxa with the command:

     # service vmware-vpxa stop

  1. Open the /etc/opt/vmware/vpxa/vpxa.cfg file in a text editor and correct the IP address of the ESX host.
  1. Start the service of vpxa with the command:

     # service vmware-vpxa start

     Note: for VMware ESXi, you may have to restart all the management agents. For more information, see restart the agents on an ESX or ESXi Server (1003490) management .

  1. Rebuild the VirtualCenter agent on the ESX host configuration file:

     Attention: this step removes all the Statistics counters historical host and the virtual machine. If VMware ESX host is running in virtual machines that starts in a permitted CVS environment, you maybe won't be able to add the host without stopping the virtual machines first.

  1. Right click on the ESX host in vCenter Server and click Disconnect.
  1. Remove the ESX host disconnected from vCenter Server.
  1. Backup the file vpxa.cfg with the command:

     # mv /etc/opt/vmware/vpxa/vpxa.cfg /etc/opt/vmware/vpxa/vpxa.oldcfg

  1. Add the ESX host disconnected to the server vCenter inventory.
  1. Run the following command to view the contents of /etc/opt/vmware/vpxa/vpxa.cfg and confirm that the host IP address is correct:

     # cat /etc/opt/vmware/vpxa/vpxa.cfg