Satellite P25-S507 is not out of sleep mode

Similar Questions

• Satellite L850-A635 does not wake from sleep mode

  purchase date: June 6, 2012

  When I put it in mode 'sleep', he goes to sleep, but when I start, it awakens me unless I have remove the battery, put in place and turn it back on.

  Please advise me how I can solve this problem

  Hello

  What happens if you press the power button / stop 4 sec long?

  Please run a HARD drive recovery procedure: (F8, fix my computer-> Toshiba HDD recovery)
  Don't install any software, but test the "sleep mode" immediately after that drive HARD recovery is completed.

• Satellite P25-S507 - HARD drive replacement

  Hello

  I have a Toshiba Satellite P25-S507, which more is under warranty and has begun to report S.M.A.R.T. errors.

  SmartMonitor reports a lot of questions especially marked as old age so I need to replace the disk. I was wondering if I can replace it with any standard 2.5 "ATA as an ATA-100 player. as the disk of 60 GB specification is ATA - 5.

  Any help appreciated.

  Maybe no one has replaced the HARD drive on this laptop because it s Autric series and is a European forum of Toshiba, and most of us have European workbooks

  But the P25 is very similar to the P20 series.
  The P20 supports an improved IDE (ATA-5) interface.

  Then you should be able to use IDE hard drives.

  If you want to use a faster disk (ATA-6 or later), then possibly the controller would have only allows the performance of ATA-5;
  ATA - 5 = Ultra DMA 66 = 4, = 6 MB/s UDMA-66 ;)

  Greetings

• Satellite A80-128: pointer gel coming out of sleep mode

  I have persistent problems with gel pointer coming out of sleep mode. I have to reboot to get it working again. All this experience? (I also had two new hard drives mounted so far due to problems of pointer!)

  Hello

  Have you installed your device with the Toshiba Recovery CD?
  On this CD, you will find a Windows image with all the drivers, tools and patches.
  (Quickfix engineering) QFE patches East of patches from Microsoft you can also find on the Microsoft Web sites.

  But if you have installed the operating system with the Toshiba recovery image all have to factory with no problems.

• Remote usb mouse freezes for bout 45 seconds after coming out of sleep mode

  Remote usb mouse freezes for bout 45 seconds after coming out of sleep mode

  Hi Aubrey,

  Step 1: Put the computer to boot and see if the problem still occurs

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 not waking from sleep mode

  Hello

  Lately, my DELL Inspiron 580 (Windows Home Basic) caused problems when I try to take out the "sleep mode".

  The symptoms are:

  * Moving the mouse, the LED monitor and Tower remain 'orange '.

  * When I press a key on the keyboard, the Tower starts to emit a higher than normal Purring noise level, it seems to be the fan, but I'm not sure. Monitor LED lights too but shortly after, the monitor switches to "energy saving" mode and doesn't. The Tower continues to emit "fan noise" and its LED remains white, but it does not start, or so it seems that the monitor remains dark.

  * In this State, if the Menu button on the Dell monitor is presses pressed, it flashes a message indicating that no signals are received from the PC.

  * If I turn off the Tower, the Tower power button, and try a bit later, the PC starts, but after a few attempts.

  I would be grateful to receive advice and suggestions.

  Aksa8

  Hello Aksa,

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  You made any hardware or software changes on your computer before the show?

  Thank you for details on the question and your efforts to resolve.

  This problem can occur for the following reasons:

  -Powers are damaged or incorrect.
  -BIOS reduces power to the port to which the input device is connected.
  -Point keyboard in Control Panel is not configured to wake the computer when you press a key on the keyboard.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run Troubleshooter of power and control.
  Reference:
  Open the troubleshooter of power
  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  If this does not help, use method 2.

  Method 2:
  Please use the suggestions contained in this Microsoft Knowledge base article and check the issue.
  Reference:
  The problems of wake the computer from sleep mode
  http://Support2.Microsoft.com/kb/266283

  Important notes:
  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry

  Information with dubbing:
  Sleep and extended: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Recently started - can't get out of sleep mode

  XP SP3 - after PC switch mode 'sleep', cannot get out of sleep mode with mouse, keyboard, or by opening the cover on the top of the Tower - must press the power button.

  I checked the control panel / Dipslay and don't see any necessary adjustment automatically exit mode "Eve"

  Any suggestions on how to fix?

  Hello

  · What is the number and the model of the computer?

  · Do you remember all the recent changes on the computer before the show?

  Try the steps listed in the link below: how to solve the problems of hibernation and standby in Windows XP: http://support.microsoft.com/kb/907477

• Windows 7 - new computer - changes in size of text coming out of sleep mode

  I have DPI set at 125% but when out of sleep mode, the screen goes to 150%, even if she is still set to 125% - so no reason, he goes back to the right size.

  Enjoy all the proposals/solutions.  Linda H.

  For anyone else having the problem; Open the Device Manager, graphics cards and update the drivers from the Chipset.  In addition, make sure you have the correct display resolution.  It worked!

• Need info on updating graphics card for Satellite P25 s507

  Can someone give me a list of a toshiba satellite p25 s-507-compatible graphics cards? for example, is a "nvidia geforce 6800 go" ultra compatible?
  10 x a lot

  I guess you want to know which graphics cards are compatible, because you want to upgrade the graphics card. Am I wrong?
  As you probably know, mobile technology is not the same as the desktop PC simply and it s is not possible to replace or change the graphics card.

  Especially chips are set on the map and it of not possible to improve it. Also the BIOS, chipset utilities and other application would not accept the new graphics card.

• Satellite L750 - does not wake from sleep mode

  Hello

  I just bought a Satellite L750 and he didn't wake up from sleep mode. I force with button stop / stop each time in switching mode 'sleep'.

  Any ideas?

  Are you using the original pre-installed OS that you got with your laptop?
  Have you noticed the same problem with the hibernation mode?

  Did you install additional software?

• The mouse does not work when coming out of sleep mode

  I move the mouse to the computer of the mode "Eve".  Our journal 3 on tiles appear.  My husband,. admin Acct and finally my user account.  Admin account and my acct have the same privileges.  In any case... The mouse will not move the cursor at all once the computer wakes up from sleep mode.  My husband tile is highlighted and so I either hit tab again so he can highlight other options that I can hit enter too and I hope that the mouse starts to move the cursor.  It won't let me spend the good user.  If I type his password on his account, sometimes it works and other times it won't.  So I tabulate between change username and password reset and cancel until he started working.  Very frustrating!  I changed the batteries in the wireless mouse and it would work for a day or two and then same problem.  I also tried to return to an earlier point when the computer worked as it should.  Again... problem would return.  I have tried installing and re - install the intermittent operation of device (mouse) and then the next day would not.  Finally uninstalled this mouse and bought a new Logitech wireless mouse.  He began to do the same.  Help, please!

  Hello

  (1) work well before?

  (2) don't you make changes to the computer until the problem occurred?

  I suggest you to try the steps below and check if it helps.

  Method 1: Make sure to enable the option to allow this device to wake the computer for the mouse and keyboard and check if this can help, follow the steps provided below.

  1. click on Start.

  2. now type devmgmt.msc in the search for files and programs.

  3. on the screen of the Device Manager, right click on the mouse and other pointing devices.

  4. Select Properties.

  5. now you must click on the power management tab.

  6. now check box allow this device to wake the computer.

  Method 2 : You can also try to create a new power plan and check if it helps, here is the link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-create-or-delete-a-power-plan-scheme

  Hope this information is useful.

• PC will not come out of Sleep Mode

  I've had several incidents of attempt to wake from Sleep Mode where the screen remains black.  My only recourse is to stop and restart the computer.  Using the Standby Mode allows me to avoid to run the computer continuosely or make several stop / restart, but I need to eliminate anything that causes this problem.

  Hello

  Thanks for posting your query to the Microsoft forum. I will definitely help you with this.

  This could be due to pending updates or due to some changes in power settings.

  Check the same Windows update history .

  Restart the computer and check the issue. If the problem persists, follow the steps below:

  Method 1: I suggest you to run the Troubleshooting of power utility to adjust the power of your computer settings and check if it works properly.
   
  Here are the steps:
   
  1 open the Troubleshooting of power utility by clicking the Start button, then Control Panel.
  2. in the search box, type Troubleshooting, and then click Troubleshooting.
  3. under system and security, click improve power consumption.
   
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
   
  For more information, connect to:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  Method 2: I suggest you check the allow this device to wake the computer includes a graduation.

  Here are the steps:

  1. click on Start, type Device Manager in the search box.
  2. go into Device Manager.
  3. click on keyboard, it will display your keyboard, right-click and go to Properties.
  4. Select power management.
  5. check allow this device to wake the computer.

  For more information:

  Sleep and extended: frequently asked questions  
  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

  Let us know if you need more assistance. We will be happy to help you.

  ___________________

  Thank you best regards &,.

  Isha Soni

• Laptop will not go into sleep mode

  Mode, Sony laptop Vaio VGN-FE855E
  Intel centrino Duo 1.67 Ghz
  2 GB RAM 667 Mhz Kingston
  120 GB HDD
  Mobile Intel 945 Express Chipset Family
  All the latest drivers as of April have been installed on the hardware.
  with Windows Vista SP1

  After receiving the last windows update for Windows Vista Premium, when you try to enter standby the computer hangs and will not enter sleep mode.
  Before reveiving updates he managed to switch mode sleep without problem and did every time. It will enter is no longer waiting for any means.
  I tried windows backup and Restore Center. After you select an older version before April 12, 2009, he was able to enter standby mode once more. Only after that the new updates, it was uninstalled had been relocated was not able to enter standby again.
  Initially, the computer starts to enter standby by closing the form. Then it goes weird after that, by the computer itself (which he never did before) inhibition and then it just hangs and the power light will not go to the flashing red indicating standby remains just green, who is running.
  The Hard drive is still spinning and accessing the hard drive very fast and light second every two seconds.
  When any key on the keyboard is hit the computer restores the sound itself and a sound through the speakers, which he has not already done. It then the screen turns on and brings the computer to lock screen / connection of the computer. I am able to log in and use normally.

  Hello, Justin

  Standby is activated in the Plan of high power Performance?

  You can check it out by going in the Power Options, click on change Plan under High Performance settings and check the computer put to sleep. If this option is enabled, click on change advanced power settings click on [+] Multimedia settings, when sharing media and change the setting to allow the computer to sleep.

  Let us know if that helps.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Windows 7 home prem OA: my laptop won't come out of sleep mode after starting upwards!

  Hello I have a HP Windows 7 home prem AO. And I can't raise the lap top the sleep mod after departure. I tried rebooting with the removable battery according to the HP video help. But it does not help me I done all I can! If anyone can help me please!

  Hi there @Zotya15,

  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, HP experts and other support staff. I understand that you have a problem with the computer not to wake. I'll be happy to help you.

  Please post the complete product and the operating system on your computer. Check out the following, if you need assistance with this information.
  How can I find my model number or product number?
  Is the Version of Windows on my computer 32-bit or 64-bit?

  I will do everything I can to help to get more information.

• Windows Vista crashes when coming out of sleep mode

  When I get out of mode 'sleep', the computer crashes and I get a message of dump of crash that don't last long enough to play entirely. I have to start the computer in safe mode, and then restart windows vista safe mode. This just started happening in the last few days. Ideas for a fix. ?

  Hi bissie,.

  Thanks for posting on the Microsoft answers Community Forums.

  Sometimes an error occurs on your computer and you're immediately struck by a mistake. The only problem is that the screen flashes if fast as you rarely get to see what may have caused the error in the first place. Once we get to know the error that we would be in a better position to solve the problems on the issue.

  First of all, we will try to disable the auto restart so that we get the full error. Follow the steps to disable it.

  1. click on the Start button

  2. from Start menu click Control Panel

  3. in Control Panel, click on the system icon

  4. in the window system to look on the left side of the window and you will see a list of options. Click the advanced system settings option

  5. because the management of the computer requires administrative privileges, you can find the user account control is displayed. If she then enter the required information (if you are not the administrator) or, if you are the administrator, click on the button continue

  6. in the advanced settings window, look for the startup and recovery section and then click on the settings button

  7. in the startup and recovery window, find the marked section of the system failure and delete the "tick" of the option 'automatically restart '. Now press the OK button

  8. Finally, click the OK button in the System Properties window, and then close the system window.

  Let us know the error message you get after recovery from sleep mode.

  You can try the Microsoft article that fixes most of the problems with sleep

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista:

  http://support.Microsoft.com/kb/950686

  Also as you mentioned that this was happening a few days ago then you can try to perform a system restore. Restore the computer to a point while it was working fine.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  2. in the System Restore dialog box, click on choose a different restore point and then click Next.

  3. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  4. click on finish.

  The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  Click on the link below for more information on restoring the system

  System Restore: frequently asked questions

  http://windowshelp.Microsoft.com/Windows/en-us/help/517d3b8e-3379-46C1-B479-05b30d6fb3f01033.mspx

  Hope the above information helps.

  Kind regards.

  Nicolas Mathieu

  Visit ourhttp://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.