Server has not reported OK, got 452 (error Code)

Similar Questions

• error when you try to update: "windows has not can find new updates, error code A 8024, 000.

  Original title : I can't update my computer... can anyone help me?

  I use Windows vista ultimate and I get the same message when trying to update-"Windows not can find new updates, error code 8024A 000 can someone help me?"

  See this thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/Windows-Update-error-code-8024a000/562845f3-78d5-42A0-bed5-e3fd39f01df7

• Cannot convert Server 2008 R2 Machine get error: Instant The VSS cannot be stored, because there is not enough space on the source volumes or because the source computer does not all NTFS volumes. Error code: 2147754783 (0x8004231F).

  I have a couple of server 08 R2 machines where the P to V conversion fails.  I did some research and the problem seems to be related to the system reserved Partition that has 0% available 100 MB free space.  Conversion fails with the error below.

  VSS snapshots cannot be stored because there is not enough space on the source volumes or because the source computer has not all NTFS volumes. Error code:
  2147754783 (0x8004231F).

  
  

  Someone had this problem and came to the top with a solution or to get around?
  

  
  

  Thanks in advance
  

  Guessed it.  My snapshots Appassure did not also exist with a similar error, so that's what I did to solve it.  My servers now converted without any problem.

  1. Open disk management.
  2. Look at the partition of the PRS and see if it is 100% full.
     • If Yes, proceed to step 3.
     • If this is not the case, check if there are readers who have no more of 300 MB free (minimum requirement to use VSS).
  3. Click a drive, select properties and then select the instant snapshots tab.
  4. Ensure that all shadow copies are disabled and no limit on all players.
  5. Go to the partition of the SRP and assign the B:drive letter.
  6. Open the B: drive via disk management, and then locate the folder System Volume Information. Note: if necessary, change the folder options so that you can view hidden files, folders and drives.
  7. Right-click the System Volume Information folder, and then select Properties.
  8. On the Security tab, click Edit, and then add the group with full control everyone in the folder.
  9. Open the System Volume Information folder (you should see log files are full), open a running as an administrator command prompt and then type the following commands to unload the filter driver.
     • B:
     • B:\>FLTMC UNLOAD AAFSFLT
  10. Navigate to the System Volume Information folder, and then type the following commands:
      • B:\>CD System Volume Information
      • B:\System Volume Information > AALOG_ DEL * (this will remove all of the log files, and then re-create a new)
      • B:\System Volume Information > CD\
      • B:\>FLTMC LOAD AAFSFLT
  11. Close the command prompt window.
  12. In Windows, right click on the reserve system folder and remove the Group everyone.
  13. In Disk Manager, remove the B: drive (and click Yes when prompted with a warning window).

• Windows SP1 - "the server has not responded.

  Hello!

  I perform a clean installation on the machine of my old mother. In fact, service of the only operation I can install is Windows XP Pro. I downloaded the sp1aexpress_usa.exe file to automatically perform the update.

  After a few checks performed by the program, he prepared to download the Service Pack 1 files. A few seconds/minutes later, the following error message appears: "the server has not responded.

  I spent nearly 3 hours to dig the web to see if I can download SP1 from somewhere within Microsoft, without a bit of luck. Is it possible to upgrade correctly from this machine to SP1 - SP2 - SP3 and thus now or should I format the computer once more and try an operating system open source?

  Thanks for your time

  Pablo

  SP1 (SP1a) is totally useless. All you need to do is to install SP2 and SP3. For more details:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_install/recovery-CDs-and-XP-Home/3256a8db-F1C1-40f5-A6AC-82f4c3c4266a

• I can access the internet but can no longer send or receive mail. I get a message that the POP 3 Server has not responded.

  I can access the internet but can no longer send or receive mail. I get a message that the POP 3 Server has not responded. Nor do the SMPT server. 0x800CCC19 error number is given in both cases. I have no help when I type the error number in the help Windows Mail. How can I solve this problem?

  original title: can't send or receive emails.

  Tools > accounts > select your account > properties > Server tab, ensure that 'Connect with password' is not enabled.

  Or you might want to try the new port settings.
  http://www22.Verizon.com/residentialhelp/highspeed/email/setup+and+use/questionsone/124289.htm

• Server has not then attempt to restart (restart count = 1)

  Hi all
  
  Today, we have seen our wls server automatically restarted
  no errors detected in the newspapers with the exception of the below
  can you please help here?
  
  < s FINEST > < NodeManager > < waiting for the process to die: 27023 >
  < INFO > < NodeManager > < server has not then attempt to restart (restart count = 1) >
  < INFO > < NodeManager > < start WebLogic server with command line: $DOMAIN_HOME/bin/startWebLogic.sh

  When you're on 32-bit system - Linux can manage files more than 2 GB (the limitation is due to the size of the 32-bit integer, which gives the largest possible file of 2 ^ 31-1 bytes).

  In most of the Linux kernels, however, the changes made in support of large files: http://www.suse.de/~aj/linux_lfs.html and http://people.redhat.com/berrange/notes/largefile.html

  Something to note: Some Linux distributions may include a limit of file size of software as an installation by default, most common
  is the restriction of 1 GB. To check your system runs the command 'ulimit-f '. If printing result is 'unlimited' there is
  No software limit.

  If it is the case that your system does not support large files, you can change the logging in weblogic as the
  the log files are turned when they reach a certain size. (http://download.oracle.com/docs/cd/E21764_01/apirefs.1111/e13952/taskhelp/logging/ConfigureAndViewLogs.html)

• The server has not completed the compliance audit of the licenses. If the server is joined to a domain, make sure that the server can connect to a domain controller.

  Hi all

  Can I confirm with expert from Microsoft, it's windows foundation server 2012 may not be the first domain controller (which means that the first AD in the forest)? It must be attached to the root of the forest as a domain controller. If I'm promoting it to be first DC in new forest, he invites you to "the server has not completed the compliance audit of the licenses. If the server is joined to a domain, make sure that the server can connect to a domain controller. If the license compliant check cannot be completed, the server will automatically close in 9 days...

  Thank you & best regards
  Andy

  Hi Andy,.

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en/category/WindowsServer

  Hope the helps of information.

• XP5.1 SP1a download "the server has not responded.

  I had to reinstall XP 5.1 and I try to install SP1a.  On the attempt to download - I get the message "the server has not responded.  I have an internet connection - I asked the download from the MS. download site  For some reason machines updates do not work and I need to install SP1a to get to SP3. Location that is not responding is 'HTTP:xpSP1.micrsoft.com/isapi/pstream3.dll/xp/SP1.USA.1106a '.

  THX

  I had to reinstall XP 5.1 and I try to install SP1a.  On the attempt to download - I get the message "the server has not responded.  I have an internet connection - I asked the download from the MS. download site  For some reason machines updates do not work and I need to install SP1a to get to SP3. Location that is not responding is 'HTTP:xpSP1.micrsoft.com/isapi/pstream3.dll/xp/SP1.USA.1106a '.

  THX

  Were you recently doing a Clean Install? I ask because you are implying in your installation of Windows XP is in 'gold' or SP0 (i.e., pre - SP1) level. Well sure, automatic updates will not work!
  You can use this path to level – says in passing:
  Gold XP to XP SP2 to XP SP3.
  Note that installing SP1a is TOTALLY USELESS!
  Here are the detailed instructions:

  1. download the installation of SP2, SP3 and IE8 files. I prefer to keep these on a USB key, but this is optional. Here are the links to all the installation of three files:

  http://www.Microsoft.com/download/en/details.aspx?ID=28 (for SP2)

  http://www.Microsoft.com/download/en/details.aspx?ID=24 (for SP3)

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=43 (for IE8)

  And if you wish, download the Setup file of a good anti-virus program. I recommend Avira free Antivirus:

  http://www.Avira.com/en/Avira-free-antivirus

  2. disconnect Internet.

  3. temporarily disable the automatic updates.

  4. install SP2. Reset.

  5 install the SP3. Reset.

  6 switch to IE8. Restart TWICE.

  7 install an Antivirus software.

  (What happens very often is that someone has their software antivirus running as they try to install SP3, which often translates into chaos! "This is why it must be done after installing SP3 and IE).

  8 make sure that firewall Windows is activated (it should be).

  (Now you can physically reconnect to the Internet.)

  9 visit Windows Update to download and install only the critical security updates.

  10 re - enable automatic updates.

  After the back if you need guidance.

• Facebook does not European site in my borwser all I receive this error code "this site has been blocked for you" or "error code: ssl_error_no_cypher_overlap'.

  Hi guys Icant open my Facebook I receive this error code (this Web site has been blocked for you) or (error code: ssl_error_no_cypher_overlap)

  Hi Dhivyaraj,

  Thanks for choosing Microsoft Community.

  I see that you get an error message "this Web site has been blocked for you" or "error code: ssl_error_no_cypher_overlap' while accessing the Facebook. .

   

  It would be useful, if you answer this question:

  Did you do changes on the computer before the show?

   

  I suggest you follow the provided methods to solve the problem of face book:

  Method 1: Clear the SSL State.

  a. Click Start and type run in the search bar...
  b. in the prompt to run it, type inetcpl.cpl and press to enter.
  (c) in the properties of Internet window, click on the content tab.
  d. click Clear SSL State.

  Method 2: Try optimize Internet Explorer and check to see if it helps, here is the link:

  http://support.Microsoft.com/kb/936213/ro

  Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Note: if the problem persists, you can contact facebook support.

  http://www.Facebook.com/help/community

  If you need help with the Windows operating system, just tell me and we will be happy to help you.

• I got the error code 646 on uninstalled updates. Does anyone know what this means?

  What is called NVIDIA GeForce 8300GS tried to install something on my computer yesterday.   He ruined my size and audacity of things on my computer.   When I am gone to see if it was of Micorsoft I discovered that I'm not getting their fixes is installed on my computer since May.   I got an error code today for 3 correct code 646 was, but I don't know what that means?   Is that what someone else has this problem and is there a solution for this?

  Vicki M

  Screen resolution:

  ·

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not fix it:

  Go to the Web site of the manufacturer of your laptop computer-graphics/computer card > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  Then:

  http://Windows.Microsoft.com/en-AU/Windows-Vista/change-screen-resolution

  Change the screen resolution

  Screen resolution refers to the clarity of the text and images on your screen. At higher resolutions, items appear sharper. They appear also smaller, so more items adapted to the screen. At lower resolutions, fewer items adapted to the screen, but they are larger and easier to see. At very low resolutions, however, images may have serrated edges.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Error 646:

  http://support.Microsoft.com/kb/2258121/en-AU

  You receive the error code 0 x 80070646 or 646 error code when you try to install Microsoft Office updates

  http://www.Microsoft.com/downloads/en/default.aspx

  Put the KB numbers in the search at the above link > download them manually.

  If the above does not solve it:

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon

  Mick Murphy - Microsoft partner

• Upgrade Windows xp to Windows 7 Professional. During installation I got the error code 0 x 80070005. Solution?

  error code 0x80070005

  Upgrade Windows xp to Windows 7 Professional. During installation I got the error code 0 x 80070005. Solution?

  How to troubleshoot the error codes Activation Volume Windows 7, Windows Server 2008 and on Windows Vista computers
  http://support.Microsoft.com/kb/938450

  Error code 0x80070005

  Symptom
  When you try to use a KMS host, a KMS client, or a MAK to activate one or more computers, you may receive the following error message:

  0x80070005
  Access denied that the requested action requires elevated privileges.

  Cause
  This problem occurs if the user (UAC) access control does not allow activation of process run in a not high command prompt.
  Workaround
  To work around this problem, follow these steps:

  1. Click Start, click principally made programs, accessories, right-click Guest, and then click Run as.
  2. click on the next user and then select Administrator in the user name list.
  3. click on OK.
  4. at a command prompt, type the following command and press the "Enter" key: slmgr.vbs

  J W Stuart: http://www.pagestart.com

• I got the error code "WindowsUpdate_00000643" "WindowsUpdate_dt000"

  I got the error code "WindowsUpdate_00000643" "WindowsUpdate_dt000" when I try to install update ' update dla programu Microsoft .NET Framework 4 w systemach Windows XP, Server 2003, Windows Vista, Windows 7, Server 2008 i Server 2008 R2 dla systemow opartych na procesorach x 64 (KB2468871). I tried 'http://support.microsoft.com/kb/958052 ' but it is does not work. How to upgrade?

  Try the following to see if it solves the problem:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_update/Win7-HP-update-failed-for-framework-4/9480305c-1a57-4798-bf6a-37a5573c7c3c >>

  UTC/GMT is 23:30 on Wednesday, November 16, 2011

• I tried to download for kb973636 auto update and got an error code 646, then I've done a manual download and got an error code 1327 showing invalid drive: o:\ location, how can I change the drive to c:\ drive.

  I had trouble to download the kb973636 update as it failed and I got the error code 646.  So I did a manual download to computer and got the error code 1327 telling me I have invalid drive o:\ and not c:\ drive somewhere.  How can I fix it and it will not happen in the future?    Ronald E Fish

  Hi captainron57,
   
  Welcome to Microsoft answers community forum!
   
  You can follow these links for a detailed resolution:
   
  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/4a971145-86ca-4B80-A545-93a36536d690
  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/6e716883-7af4-4A9F-8665-2f4dd57eee8d

  Post back with the State of the question, for additional help or even if the issue is resolved.

  Hope this information helped!

  Thank you, and in what concerns:
  Aziz Nadeem - Microsoft technical support.
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• File\i386\C-437.NLS could not be loaded. The error code is 32768

  Would somebody get out me of my question below?

  When I set up my operating system professional Window XP, an error message popped up as "File\i386\C_437.nls could not be loaded. The error code is 32 768. Setup cannot continue. Press any key to exit. "It's a brand-new product of geniue which I bought in Singapore from Microsoft on the Web.

  Now, I want to have the problem fixed so that I can be able to configure system. Thank you very much.

  Hello

  You can clean your system by using the disk cleanup utility (i.e. remove unwanted files from the system). I suggest you return the item mentioned below.

  Description of the tool in Windows XP disk cleanup

  http://support.Microsoft.com/kb/310312

  I also suggest you to extend the system C:\ drive and check if the problem is resolved.

  The partition size is extended, but the file system remains the original size when you extend an NTFS volume

  http://support.Microsoft.com/kb/832316

  How to extend a data volume in Windows Server 2003, Windows XP, in Windows 2000 and in Windows Server 2008

  http://support.Microsoft.com/kb/325590

  How to use disk management to configure dynamic disks in Windows XP

  http://support.Microsoft.com/kb/308424

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Windows not can find new updates error code 80073712

  I have a Dell Inspiron 1525 with Windows Vista, Intel Core 2 Duo. I get this error code: Windows could not search for new updates - error Code 80073712. A view of my previous updates log indicates that the last time I received updates Windows has been 14/07/12. I tried a system restore, but the first restore point was 04/09/12. I tried restoring the system anyway, and there no reolve the problem.  I went on the web and the fixer online Windows did not work. Don't know what to do.

  Have you tried any of these terms of the resolution?