Server managed by IOM reached often into account maximum data sources

Similar Questions

• 2d line, numbers and dates. How to take into account the date value when drawing a 2d line?

  Hello. I just encountered a problem when tracing a line 2d with numbers.

  I have the following table:

  Date	Total
  2015 12-31	R $150 000,00
  2016 03-19	R $159 000,00
  2016-03-25	R$ 166,090.00
  2016-04-01	R$ 159,250.90
  2016 04-10	R$ 165,343.41

  But when I create a 2d line chart it does take into account the fact that the 1st line is in December. Numbers do not fit the distance between the data symbols according to the date, but instead just consider the dates like any other label. Which causes the curve final not not to be specific

  

  Is it possible to make account numbers of dates when tracing of graphics?

  If you don't want the dates to be spaced when you do not have uniform intervals so you can use a cloud of points in 2D instead of a 2D line and turn on the connection line, something like this:

  

  Note that with the Scatter 2D (unlike with 2D line) you do not want to be defined as a column header in the left column.

  SG

• Win2012 Server. Y at - it a shortcut to reach the Collections to the remote desktop Services without going through the Server Manager

  Win2012 Server. Y at - it a shortcut to reach the Collections to the remote desktop Services without going through the Server Manager?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Unable to see the Collections in remote desktop Services in Server Manager

  It doesn't seem to be a category for Windows Server for some reason, so I apologize if this is in the wrong category:

  We recently had an administrator leave our of the it group, and he was the one who had set up our fund services / remote server.  Recently, we wanted to deploy another remote application and found that we were not able to see the "Collections" option in the server in remote desktop services manager.  The only option listed is "servers".  However to reactivate the account administrator and the server like him gave us all permissions to see the option of Collections and to deploy another remote application.

  My question would be, this is a policy of setting Group / somewhere that is limiting the other users of the full access to Office services in Server Manager remotely.  I looked everywhere on the server (and google) to see if I could find where this setting is vain.  Any suggestions/help would be greatly appreciated.

  Thank you!
  Heda

  Hello

  Server forums are in an another Microsoft Community to it.

  This community is mainly for users.

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Add Server 2012 R2 Server Manager servers dialog box problem

  I have a problem in 2012 R2 Server when you add a remote server to all server management interface.   Using the dialog box add servers to add a workgroup server (no configured DNS server), I added the problem of server using the IP address.  A dialog box appears that says "can't resolve host would you like to add it anyway?  For awhile do this, I clicked 'No', but finally clicked on Yes and the server by its server name has been added.

  However, I can not access this server remotely, make sure that it is in the list of approved first hosts.  I have the correct IP addresses and have firewall advances for troubleshooting I can connect on the server locally with an administrator account.

  Removing the server from the remote management console, and then add that it does not solve the problem as server name solves always in the dialog add a server with the credentials apparently wrong.  It is the only server of four that I made this mistake, the other three work great after choosing 'Yes' to add the server non - solve anyway.

  My question is, how do I clear the credentials of server 'broken' out of the 'Add Server' dialog box to the server properly.  The added server is another Server R2 2012.  I changed server names and addresses IP, but the dialog box always detects the server with the new information and still not will not properly add it to Manager remotely.

  And the idea of how to do to erase the old credentials?

  Thanks in advance.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• The PowerEdge 6850 with RHE Linux server management

  We have a PowerEdge 6850 with Red Hat Ent. 5 Linux installed.  I have difficulties to access remote management.  The machine has two network ports and it also has a PCI card with a VGA and Ethernet port... not exactly even.  I got a bit of a mess here...

  The server administrator seems to already installed in/opt/dell/srvadmin.  If I run /opt/dell/srvadmin/setup.sh I get the following:

  #./setup.sh

  ##############################################

  Custom of the administrator of the Server Setup utility

  ##############################################

  Server Administrator version 5.3.0 is currently installed.
  Components installed are:
  -srvadmin-deng - 5.3.0 - 438
  -srvadmin-jre - 5.3.0 - 438
  -srvadmin-omhip - 5.3.0 - 438
  -srvadmin-racadm4 - 5.3.0 - 438
  -srvadmin-iws - 5.3.0 - 438
  -srvadmin-storage - 5.3.0 - 438
  -srvadmin-syscheck - 5.3.0 - 438
  -srvadmin-happy - 5.3.0 - 438
  -srvadmin-omilcore - 5.3.0 - 438
  -srvadmin-ipmi - 5.3.0 - 438.DUP
  srvadmin-omauth - 5.3.0 - 438.rhel5
  -srvadmin-rac4-components - 5.3.0 - 438
  -srvadmin-racdrsc4 - 5.3.0 - 438
  -srvadmin-isvc - 5.3.0 - 438
  -srvadmin-cm - 5.3.0 - 438
  -srvadmin-omacore - 5.3.0 - 438
  -srvadmin-racsvc - 5.3.0 - 438

  Do you want to 7.3.0 Server Administrator?
  Press ('o' for Yes |) 'Enter' to exit): y
  Error: Check if the server admin media are corrupt.
  If you use the Web pack to install Server Administrator,
  Make sure that you use the corresponding Web pack to the
  architecture and operating system on your system.

  #

  Yet, I am unable to reach any kind of remote web interface or web server management interface.  Please help me to get access to the management of the system.  The priority is to access the administration of two paintings by MD1000, we connected to the 6850.  Thank you

  You can try a different browser? Older versions of the iDRAC of security can do not meet the requirements of more recent browsers.

• Hot migration is possible with VMWare ESXi 5.1.0 without an ESX server management

  Hot migration is possible with VMWare ESXi 5.1.0 without an ESX server management?
  I wonder for a future issue, a scenario where a system administrator must build a Win2008 + DC on local storage, server
  then, once the physical box is integrated into the class network, the physical box is connected to the classified SAN storage.
  Is it possible to hot - migrate the server Win2008 + CC local storage to SAN storage at this time, with only the
  free version of VMWare ESXi 5.1.0?

  Welcome to the community - I guess that you are looking to do this, while the virtual machine is currently running - this is not possible without a management server, also called vCenetr, but all is not lost because you would be able spend the VM local storage to the San with the VM posered using the client storage management features

• What hay than into account virtualizar una Máquina antes?

  Hola a todos;

  Queria saber if exist algun programa haga UN chequeo a servidor para saber fisico Québec if esta in terms of ser virtualizado?

  If neither exists any tool Québec lo haga, las which son consideraciones has into account virtualizar antes a physical server?

  MUCHAS gracias

  Buenas,
  If you have vCenter wont you can use el del vSphere Client Consolidation para recolectar del servidor fisico antes virtualizarlo information. Todos lo mods that will be replaced by Recomiendan are:

  • As el SO of you server a virtualizar sea compatible con version of VMWare (revisa the VMWare compatible sistemas compatibilidades matriz). In the funcion of esto perhaps tengas than fornuis algun Service Pack, o veras TR are compatible o not.
  • Adicionalmente revisa as el host VMWare can trabajar con el mismo rango of IPs you Máquina fisica o If you server physical, you can work con otra otro rango, una vez virtualizado, in caso contrario IP.
  • Not revised you equipo fisico no need of alguna placa, usb especial than evite ser virtualizado.
  • Revisa if you equipo fisico has applications instaladas than esten licenciadas in funcion del material, there are y asi lo virtualizas, tus applications funcionar dejaran, al change el hardware del servidor.
  • Revised el dimensionamiento del servidor y if disco suficiente dispones realmente, y RAM CPU. To be replaced by Recomiendan el menor number of vCPUs possible use of forma you application h. correctamente (mas vCPUs no siempre means a mayor performance).
  • The need to perform the tests of stress of tus applications Plantea (ejempl por osi web son applications).
  • Revised por ultimo if the tool as utilizaras para realize conversion are compatible you con equipo fisico. Also VMWare Converter StandAlone, asi as revisar las puedes utilizaras release notes version use y worm TR are compatible para virtualizar you equipo fisico.

  Saludos.

• Cannot log into account via "elements 10 'Inspiration Browser'

  I did a "live chat" and they sent me here.

  Cannot log into account via 'Éléments 10 Inspiration Browser'

  "When I click on 'Help'"elements Inspiration browser..." "and enter the user name and password and click"sign in"the program goes to the login page and freezes for hours. I have to use 'Task Manager' to 'end task' and close 10 frozen items.
  

  When I try to do a 'update' I get the following error Code: U41M1C212
  

  10.0.0.0 elements Organizer
  Basic version: 10.0 (20110831.m.17215)

  Name of the operating system: 2000 [Windows 8]
  Operating system Version: 6.2
  System architecture: Intel CPU Family: 6 model: step 5: 5 with MMX, SSE whole, SSE FP
  Built-in memory: 7.8 GB
  Free memory: 3.3 GB

  Important factors / plugins / libraries:
  Microsoft DirectX Version: 9.0
  Apple QuickTime Version: 7.73
  Adobe Reader Version: 11.0
  Adobe Acrobat version: Not installed
  
  The readers of CD and DVD:
  E: (BUS hp DVD: 1 ID: 1 Firmware: RW)

  The IB is dead and buried, with photoshop.com. The tutorials are now more

  http://TV.Adobe.com/product/Photoshop-elements/

  Although some of them have been updated to newer versions.

• Why Thunderbird leaving messages on my server even though I have an IMAP account?

  I did some research online and tried all the solutions. Some descriptions say that IMAP accounts always leave messages on the server because they have to, and others which contradict. I am really confused and frustrated. I just want to know what I have to do to open my messages on my computer, delete them if I want, but know that they are always on my Comcast server, if I want to access it later.

  The part you are missing is that the IMAP protocol is based on the e-mail server. You simply display messages remotely on your computer or other devices. If you delete an email you're disconnected from the server. This is why there is no option to leave Message on the server as it is in a pop account. The messages are ONLY on the server until you do something different with them as move a copy to local folders.
  If you want to keep a copy of this message to your local device, you must first move a copy of the message in a folder under local folders.
  When you are sure that the message is in this local folder and you can access it, then you can remove safely from the server.

• Wrong date. A day off. Does not take into account leap years.

  We don't want the date on my iMac. It is a day of rest. On March 3, it shows March 2. Of course, it didn't take leap years into account. When I tried to change it after you have unlocked the date/time, he wouldn't let me to change the date. It is automatically defined under Apple Americas/U.S. (time.apple.com site), but the automatic setting is false. How do override us the auto setting or have them repaired?

  Oops! My watch was the one who was wrong. Apple is very well. Sorry about that.

• How to export a .sql file, I created from Oracle Application Express of SQL Server Management 2012?

  Hello

  I was wondering if you could help me.

  I'm trying to find out how to export a .sql file, I created from Oracle Application Express of SQL Server Management 2012? I'm not very technical, but it seems that the Oracle code does not work with SQL Management Studio when I drag the file inside.

  I need the database Oracle express and its data to enter in SQL Management Studio, so any help would be much appreciated!

  Thank you.

  Hello

  Your question is beyond the scope of this community.

  Please repost your question in the SQL Server TechNet Forums.

  https://social.technet.Microsoft.com/forums/SQLServer/en-us/home?category=SQLServer

  See you soon.

• How to get studio server management?

  I bought professional VS2010 but after installing I had SQL server management studio diidnot how to get it?

  Hello

  Your question is beyond the scope of these forums for answers.

  Please ask your question in the following forum.

  Visual Studio 2010 Forums category:

  http://social.msdn.Microsoft.com/forums/en-us/category/VisualStudio

  Concerning

• SQL server management studio 2008 Express intall error

  When you try to install SQL server management studio Express 2008 I get this error:

  TITLE: Default the SQL Server installation program.
  ------------------------------

  Setup of SQL Server encountered the following error:

  Invoke or BeginInvoke cannot be called on a control until the window handle has been created...

  ------------------------------
  BUTTONS:

  Ok
  ------------------------------

  Berfore I installed visual studio 2010 ultimate and Setup install with visual studio, sql server 2008 and I have windows xp servicr pack 3.

  ASK THE QUESTION IN THE SQL SERVER FORUM:
  http://social.msdn.Microsoft.com/forums/en/category/SQLServer

• How do I set up my hp6700 printer so that it prints in black and does not take into account all the colors?

  How do I set up my hp6700 printer so that it prints in black and does not take into account all the colors?

  To print the black ink only follow the steps below.

  1. Select Start menu
  2. go into devices and printers.
  3. right click on the printer, select printing preferences
  4. in the lower right corner, select Advanced
  5. and then under features of the printer select print grayscale a dropdown list will appear to black ink only.

  Let me know how it goes.