Server meetings Webex SX20 (on site)

Similar Questions

• After hosting my site created with adobe muse on a ftp server, can I change my site on muse adobe later and update it on this same server ftp with the same domain name and do not have to pay for hosting again?

  After hosting my site created with adobe muse on a ftp server, can I change my site on muse adobe later and update it on this same server ftp with the same domain name and do not have to pay for hosting again?

  Yes, no extra accommodation payment is required. After editing your site and savings, click download file to the host of VTT... The info should auto fill with the same information that you used to download the site the first time. You can choose to download only files "changed" or "all files". Click OK and the old files will be overwritten.

• can not find the server on a specific Web site

  For the last 2 days I could not access the website of nbcnews.com (and related today.com - however, I have no problem with nbcsports and nbc for shows). This has been one of my tabs House for months and nothing I can think has changed in the last few days. I have no problems with other websites I frequent.

  I tried to access the different ways - via my Home tab, through google and through the sites of nbc I can access - whenever I get the same 'problem loading page not found Server Firefox can not find server to nbcnews.com.

  I've tried clearing cookies and cache and I can't reach this site on Chrome or IE is also found. I'm not sure I want to try a reset. Is there anything else I can try or any reason you can think of why this site can be a problem?

  Great! I'm glad that you set! Please do not forget to mark the solution that helped you by clicking Solves this problem on the right side of the answer.

  If you have another question or problem with Firefox, feel free to ask a question by clicking on ask a new Question and do not post your question in this thread.

• My Web server has problems with my site from Muse...

  I just wanted to make a simple editor for my website, came to Adobe Muse, cast as a Web site, and it worked fine. Then I jumped on my Web server, and the trouble started. Each individual page gives the same popup, 'some files on the server may be missing or incorrect. Clear the cache of the browser, and then try again. If the problem persists please contact author Web site. "I have also many errors of the console javascript, according to page. Some widgets don't work, and I don't understand why. I decided to talk to my hosting provider, which have basically tried to tell me that since I am on a common plan, my javascript is screwey. obviously false. Why my Web host (HostGator) is struggling, when simply launch the .html out of my desktop computer or Adobe Business Catalyst works absolutely fine?

  Thanks in advance,
  Alex

  Thanks for the help, but that turned out not that it is. The culprit was my .htaccess file. I put it to redirect any request without a point followed by 3 to 4 characters for .html and .js is only 2 characters.

• Do we need a server VR on the protected site?

  Hello

  I wonder if I need to have the same number of server RV on the site of two (protected and recovery) or just to the recovery site or SRM use server recovery to restore site VR?

  Kind regards.

  Hello

  VR servers on the protected site is indeed mandatory conservation. I would recommend having the same number of servers or you can hit some timeouts once you reverse the replication (first stage of restoration).

  Best regards

  Stefan

• How to broadcast images stored in an external server to a Flash Web Site?

  I would like to be able to bring external images in a headband as in a slide show, but don't know how to do it. I have a bunch of small images that I love to spend, and my current banner has all the images in the swf file and the swf file is huge. Is it possible to import external images from a folder on the server? Where can I go to learn how to do this? Thank you...

  To get an idea what I'm talking about, here's the banner on our site...

  http://www.wenatcheekennelclub.com/images/header.swf

  Your best bet for this would be to Google search using search terms such as "AS3 slideshow tutorial" or "AS3 slideshow dynamic turoial.  This requires that you create an AS3 file.  Otherwise, substitiute AS2 to AS3 in the terms.

  In AS3, of the main classes used to load external images is the class Loader. THUS familiarize themselves with that will be a necessary part of learning.  But it isn't all because you want to have controls to display images.

  One thing I noticed with the banner show you, the pictures seem to be need to be any burden 'huge' file will.  You need to optimize images before import you them into the file.

  Yet, seen the images from loading from an external power supply will be better because then you can change images as you want without having to edit the Flash file.  To achieve this functionality, you must include "XML" with the rest of the identified search terms previously.

• Can I download new pages and CSS to my server without disrupting my old site?

  I was instructed to update a Web site. I'm quite new to Dreamweaver, but am reading the forums and view tutorials on lynda.com. What I was wondering is, if I can upload a CSS file and some html to our godaddy.com FTP account pages and does not disrupt what currently exists? I believe that the previous site using no CSS. I just wanted to be able to provide a link that is not connected to the current site in order to allow the customer to see what progress has been made. Thus, the site would be for example.

  Old homepage of site (www.cars.com)

  Test page unrelated site, just a private link sent by e-mail (www.cars.com/test)

  My questions are would be a CSS for the site interfere with the site loading? Can/test page to navigate to other pages that I have linked to them if I download those as well (www.cars.com/test/maps)? Should I create a directory in the directory of files from godaddy.com to separate these?

  Thanks for all the help. Links or suggestions would be great. If I can provide more information that would help, let me know.

  Hi, as long the CSS is linked only to the pages you created then they download fine.  leaves so that you have an index.html file already on the server.

  Download a page called index2.html and point your CSS file in the file index2.html, and they will not in any way interfere.

  -James

  http://www.dreamweavertutorial.co.UK

• How to set the server time zone at the Site level profile option

  Hello
  I have the problem that is mentioned in the note of support ' cannot display the chart of status or does not work after upgrade (Doc ID 304685.1). This note offers this solution:
  
  To implement the solution, please perform the following steps:
  
  1 set the profile server time zone at the level of the Site (which should be set to the value of database time zone).
  2 bounce the Apache server.
  
  I also read the notes 275876.1 , but I was not able to understand what exactly I need to do...
  
  Please, can you explain in words simple (or orders) how can I 'set the server profile zone at the level of the Site (which should be set to the value of timezone database)?

  >
  1 set the profile server time zone at the level of the Site (which should be set to the value of database time zone).
  >

  PL identify the zone where the database server. Using responsibility of the system administrator, search profile--> system, application of the profile to the site level, and then select the time zone appropriate to the LOV. Then save.

  HTH
  Srini

• You can use your own server to publish a Web site created with MUSE?

  I'm trying to find out if I can publish a website that I created in MUSE to my own server?

  Hello

  Yes you can do it.

  If the FTP, you can use "Upload to FTP" or you can use "Export as HTML" and move the file exported to the server.

  Here are the steps to do so.

  Use FTP with Adobe Muse | Adobe Muse CC tutorials

  http://helpx.Adobe.com/Muse/topics/exporting-publishing.html

  Concerning

  Vivek

• XML does not load on the server, but works well on site!

  Hello
  
  I am facing a problem that really confused me! I have a video player that grabs an XML playlist. If the path is relative to the XML, it is very good and works but when enter an absolute path (which is located in another area) it does not work! Here it is:
  http://emstris.com/sample/doftelie/NewPath.html
  
  The strange thing is that it works very well when I test the movie locally in my flash!
  
  Have you had to face such a problem? Can you help me please?
  
  Kind regards
  Hadi

  Flash hit F1 and search for crossdomain.xml

• Make the remote web server accessible via VPN Site to website

  We have two test sites that are connected by a tunnel IPSEC VPN site-to-site (hosted on a SAA each site) over the Internet. We are trying to set up an environment to test two web applications running side by side. Two web servers are running on the Site of Test 1. We don't have the same public IP available at each site.

  To address the public site 1 unique IP address restriction, we try to install ACL and NAT rules to have 2 Site accept traffic from the internet and send it on the site to the other tunnel. So 1 Web server would accept the ASA 1 internet traffic and Web Server 2 accept traffic from ASA 2 to the other site. Here's a network diagram:

  

  We have difficulties to get this configuration works correctly. Please note that the network 192.168.3.0/24 clients are able to access the servers Web1 and Web2. This question seems to be due to our NAT configuration. This is the type of error, we see on the two firewalls:

  Asymmetrical NAT rules matched for flows forward and backward; Connection for tcp src outside:4.4.4.4/443 dst outside:192.168.1.10/443 refused due to path failure reverse that of NAT

  Our situation seems similar to this post: https://supportforums.cisco.com/thread/2242230

  Any help would be appreciated.

  Hello

  What Karsten said above is true. While it is possible and works, it also means that the configuration is a little more complex to manage. I have done no such features in a real-life network environment and have always used additional public IP addresses on the local site when a server is hosted.

  If you want to continue to move forward with this so here's a few points to consider and the configurations that you need.

  First off it seems to me that the other server will be organized by the local Site 1 so a simple static PAT (Port Forward) must manage the Site 1.

  network of the WEB-HTTP object

  host 192.168.1.10

  NAT (inside, outside) interface static tcp 443 443 service

  And if you need TCP/80 also then you will need

  network of the HTTPS WEB object

  host 192.168.1.10

  NAT (inside, outside) interface static service tcp 80 80

  Now, 2 Site will naturally a little different that the server is hosted on the Site 1 and Site 2 is the public IP address used to publish the server on the external network.

  Essentially, you will need to configure NAT that both makes dynamic PAT for the addresses of the source of the connection to your server Web 2, but also makes the static PAT (Port Forward) for the IP address of the Web Server 2. Additionally, you have to set the area of encryption on the Site 1 and Site 2 to match this new addition to the L2L VPN connection.

  Unless of course you use an existing IP address on the field of encryption in the dynamic translation of PAT for the source address. In this case, it would take no change VPN L2L. I'll use that in the example below.

  The NAT configuration might look like this

  service object WWW

  destination eq 80 tcp service

  service object HTTPS

  destination eq 443 tcp service

  the object SOURCE-PAT-IP network

  host 192.168.3.254

  network of the WEB-SERVER-2-SITE1 object

  host 192.168.1.11

  NAT (outside, outside) 1 dynamic source no matter what static SOURCE-PAT-IP destination interface WEB-SERVER-2-SITE1 service WWW WWW

  NAT (outdoors, outdoor), 2 dynamic source no matter what static SOURCE-PAT-IP destination interface WEB-SERVER-2-SITE1 service HTTPS HTTPS

  So, essentially, NAT configurations above should ake 'all' traffic coming from behind 'outside' interface intended to "outside" "interface" IP address and translate the source to ' SOURCE-PAT-IP ' address and untranslate destination to "WEB-SERVER-2-SITE1".

  Make sure that the IP address chosen (in this case 192.168.3.254) is not used on any device. If she is then replace it with something that is not currently used in the network. Otherwise, configure an IP address of some other subnet and include in the L2L VPN configurations on both sites.

  Unless you already have it, you also have this configuration command to activate the traffic to make a U-turn/pin on the ' outside ' of the Site 2 ASA interface

  permit same-security-traffic intra-interface

  Hope this helps

  Remember to mark a reply as the answer if it answered your question.

  Feel free to ask more if necessary.

  -Jouni

• has anyone used gandi as a ftp host to launch the site of muse? I'm having problems connecting to the ftp server...

  I use gandi as my webhost, but unable to connect to their server ftp to launch my site... any who use before Gandy & have problems/suggestions for me to go on the launch? Maybe, I need to sign up for their package "basic accommodation", but thought before diving into this process, I would like to check if anyone has a similar experience... Thank you!

  Hello

  According to the details provided by you I guess you bought the domain at Gandi, but you want to host on Business Catalyst.

  In my view, that the field is thehivestud.io.

  And you have set incorrect NS records at the end of the Registrar as below:

  LV 1: ns3.worldsecuresystems.com - 54.252.148.151

  LV 2: ns2.worldsecuresystems.com - 54.246.209.121

  LV 3: ns1.worldsecuresystems.com - 54.236.190.129

  They must be as follows:

  LV 1: ns3.worldsecuresystems.com

  LV 2: ns2.worldsecuresystems.com

  LV 3: ns1.worldsecuresystems.com

  Properly update the Registrar of domain and you will be ready.

  Concerning

  Vivek

• Can I publish my Web site to our server/host?

  My boss asked me to create a Web site for the company, now, I have to publish it. Our company is located in Taiwan, if we want to use the local server. Now, we already had the domain name and rent the server, how to publish the site on this server?

  Hello

  To host the site on your server, you can use the download via ftp function under the menu files option in Muse.

  Annotates in FTP and then upload the site on your server, another way would be to export as html and then upload the files to the root of the server.

  This document will help you:

  http://helpx.Adobe.com/Muse/topics/exporting-publishing.html

  Thank you

  Sanjit

• Server-side include does not not on Web site

  I try to get side Server includes work on my site, but I had some problems with it. I have a server side include on 1 page where I am trying to get my head to work. So it appears fine in Dreamweaver CS5, but it does not appear on my site. I tried the file and virtual and do not seem to difference between the two (in Dreamweaver at least). I'm hosted on GoDaddy, if that makes a difference.

  What additional information do you need to solve problems?

  Thanks in advance for the help.

  Try

  http://CSS-tricks.com/php-include-from-root/

• replaces the former site files with the files edited on the remote server?

  How we replaced the redesign of my website with the old. The revised files are in a new folder on my desktop with a name other than the old files. For the server section to manage sites I click New to enter the same information as the info on my existing site or should I click on edit on the original server info. All information is the same for the location of the remote server, password, user name. The only thing different is the name of the folder where the new files are stored on my computer. Should I move the new files to the folder containing the old files. Help, please. More I read the more confused I became. Thank you. Karen

  It does not matter what drive name or folder you used on your computer.

  What is important is that the structure of the Local site corresponds with that on your remote server.

  Access the Site > Manage Sites > changing the definition of the old site > tell DW where to find the new Site Local folder.  See screenshot.

  

  Nancy O.