WebKit transform BLUR problem HELP!

Similar Questions

• The payment change ADOBE info Web page fails - I can't scroll down to save the changes. My subscription is expired and I am dead in the water! I can't find a support customer portal to this problem - HELP PLEASE!

  I can't scroll down to save the changes. My subscription is expired and I am dead in the water! I can't find a support customer portal to this problem - HELP PLEASE!

  catsrock

  Great salvation,

  We are sorry for the inconvenience caused to you!

  I recommend you contact customer service regarding this issue.

  Kind regards

  Rahul

• How prevent or substitute webkit-transform for the symbol?

  Hello

  I am creating a nav sticking with this method: http://forums.Adobe.com/message/6332905#6332905

  It works fine on a rectangle.  However, when I apply the same method to my symbol of navigation (with several items inside), this line is automatically injected into the css:

  WebKit-transform: translate (941px, 265px) translateZ (0px) rotate (0deg) scale (1: 1);

  If I uncheck this line in the chrome Inspector, navigation is both visible and is as expected.

  How I either keep or replace the web-transform?

  I tried this:

  SYM. $("sym_globalNavTabs") .css ({"location": "fixed", "top": "80px', 'left': right +"px"," - webkit - transform ":"none","transform":"none"}).appendTo($("body"));})

  But it does not work.

  Thank you

  -Sherry

  Hello

  You can check this post on the forum: http://forums.adobe.com/message/5761632#5761632#5761632

  You can add the following in your HTML code below

  Here the CompositionID is the ID of the actual composition for your file animate. You can get the name of this class by looking at the composition class correctly when you select the step to animate.

  Thank you and best regards,

  Roger Simon

• Tecra R840-S8450 - power problems - help with Blink Codes

  Looking for help, thinking on the right track, but want to confirm and get things fixed.

  Have a Tecra R840-S8450 that is having power problems. When you try to start it, the orange plug light flashes a code. This code is 01001010 which I derived shortlong short short long short long short flashes of orange electric light.

  It is great progress, assuming that I have translated as right to 52 h, which is equivalent to 'EVER5V voltage is under or equal to 4.5V when the computer is '.
  Start ". However it don't tell me what is wrong so that I can try to do something about it.

  Would be grateful for the help, thanks,

  David

  Of course quite here, is that no one from Toshiba has the manual to find codes?

  Posted by dgwbdavid
  

  Looking for help, thinking on the right track, but want to confirm and get things fixed.

  Have a Tecra R840-S8450 that is having power problems. When you try to start it, the orange plug light flashes a code. This code is 01001010 which I derived shortlong short short long short long short flashes of orange electric light.

  It is great progress, assuming that I have translated as right to 52 h, which is equivalent to 'EVER5V voltage is under or equal to 4.5V when the computer is '.
  Start ". However it don't tell me what is wrong so that I can try to do something about it.

  Would be grateful for the help, thanks,

  David

• OfficeJet Pro 8600 Plus connection problem - HELP!

  I have a strange problem: after a few hours, the communication link fell between the computer and the printer.  In this case, IE becomes unusable and not connect what either.  It is replicated on three XP Home machines.   The fourth, a vista ultimate machine, doesn't seem to be affected (yet).  I get the error "the computer scan is disabled.  It cannot be reactivated.  At this stage I can't print.  I can reach the web server embedded on the printer via firefox and can still surf using firefox.  I can ping the printer, but again, once the connection is dropped, no printing or scanning the computer.  The only thing I found that solves this problem (temporarily) is to restart the computer, which starts the cycle again.

  last night, I installed the software on a XP machine and the laptop to test when the connection has been lost.  They lasted from 19:00 on Monday until what I came at 17:00 Tuesday.  The machines were not used.  Once I started using (firefox only), and then they abandoned the connection in a half hour apart around 19:00.  The other XP machine lasted from 19:00 until 07:00 TUE MON, when my wife started to use it and then noticed he fell somewhere between 7 and 09:00 on Tuesday.  A 11:00 TUE restart ran OK until 22:00 Tuesday when the connection has been broken again (and IE is now dead).   The Vista machine works since 19:00 Monday (930 pm TUE) so far and seems to hold.

  printer cable, at 100-a lot of router link speed, IP address static, (also tried 10-half)

  router dlink di-655

  two XP machines are wired, vista is wired and last xp machine is a laptop on the wireless.

  I exchanged cables, rebooted and reinstalled several times.  I have a file a long mile on the telephone support line.  They couldn't remedy.  I asked this to escalate, but who knows when I will get an answer.

  I have enabled firewall - integrated XP

  I uninstalled the antivirus software

  I even put in place with support like crazy suggestions change the channel of the router (uh, it's wired!)

  an xp machine had a 4215 AIO connected via the USB port and the other prints to him via the network, but the printer was deleted machines on a network.

  I can ping 127.0.0.1, which is supposed to indicate that the tcp service is OK.

  I do not have reset winsock... I see a machine being bad, but three?

  malware / virus scan shows no problem.  Once again one perhaps, but three?

  The only thing I can think is that there is something in the network stack XP which is in conflict with the new software of 8600 hours pass.  There may be an operation of the poll which lights up then dies after a while, then he kills IE he is dying.

  When the printer works it's great, but the restart is not a permanent solution to this.

  any suggestions would be greatly appreciated!  I am confused and therefore support.  They send him to the genius, but who knows when they will answer.

  Thanks in advance.

  Our investigation into this issue, we found a workaround solution that will help with this.

  Follow the steps below.

  1. Please go to Hp software-> Printer Preferences - > Maintenance-> advanced settings tasks

  2 selects the second radio under 'Alerts Show', 'don't show me alerts ink when printing.

  3. now restart your PC to make sure that the setting is saved.

  Enclosed is the screen.

  

  Here's a useful support document that can also help.

• Satellite P20 & Orinoco card WiFi problems HELP?

  I hope that one of the users on the Board of Directors may be able to advise me.

  Details of hardware/software/Os & driver are listed below for reference.

  Wired LAN works fine and connects to the small network of 10 Base T ethernet with Internet connection sharing. IP addresses are automatically assigned by DHCP on the gateway computer.

  Problem is when I try to use or wireless LAN configuration to connect to an existing gateway used by two other laptops. Windows detects the device without problem but will age for the acquisition of the IP and advises when there is limited connectivity (fact ConfigFree). A connection is established and the signal strength is excellent but I am then unable to connect to the network via wireless connections or wired. The same problem arises even if I assign the IP address manually for the wireless card.

  When I then disable the wireless card, then I can connect through the LAN port cable again.

  I use Windows to configure the wireless card. The manual suggests using the Atheros Client Utility but all options on this are greyed out!

  The details are as follows:

  PC: Satellite P20-S103 Mod; PSP20E-00V7V-FR

  OS: Windows XP Media Center Edition SP2

  LAN card: Built in, identified by Windows as Realtek RTL8139/810 x Family Fast Ethernet NIC driver 5.606.811.2003 Version

  WiFi network card: integrated, identified by Windows as Orinoco PC Card Driver version Agere Systems 7.62.0.390 Mini

  Wireless Access Point: 3Com 3CRWE747A 128 Client 802 network Type. 11 b = Infrastructure.

  Atheros Client Utility: Build Sep 26 2003 Version 2.4.2.18

  Hope you can help. Looking forward to you with suggestions.

  Thank you

  Graham

  Hi Graham

  In my opinion, it is not a big problem. In my opinion, you should try to disable an option in the tool ConfigFree. Please start ConfigFree and go to map of device settings. There you can find the background option called Enable Wireless when cabledisconnect occurs. Check if this option enabled. If so, disable it and try again to make the same connection.

  I hope it helps.

• 2008 mac Pro Apple Raid card problems, help!

  Hello, I have a mac pro 2008 with a raid set up. I want to get rid of all old raid together upwards and instead put a new ssd in the first Bay. The computer cannot read it because I think that it is always configured as a raid. Does anyone know how to make the available drive bays to new readers? You're help would be highly appreciated. I want to take the Apple Raid card so I can have an additional PCI port and I also want to get out the discs four raid. Just so I can put in a single ssd! Thank you very much.

  When you remove the Apple RAID card, readers who were searched will be unreadable. You need to make backups before time, because there is no way known to them read differently.

  There is a data cable, called the iPass cable connected to the motherboard to the RAID card. You must remove this cable when you remove the RAID card and reconnect the plug corresponding on the motherboard. Once you do this, you get four bays returned as SATA bays and can install any drives that you like. The problem with a lot of SSDS is that they are 2.5-inch form factor drives and may not fit on a standard sled. Users have used an IcyDock (in the 2008 version and earlier versions) or the newer technology adaptadrive:

  http://eShop.MacSales.com/item/NewerTech/ADPTADRV/

  ... to get the alignment and attached straightened.

• Sony Vaio Duo 11 screen burn-in problem HELP!

  So I have the above mentioned material element and overall it is very good.

  BUT I have a problem which becomes more noticeable from day to day.

  When you use an application for a period of time, say 10 minutes +, whether subway or office back to the main menu of tiles Win8 show up with a burn-in of the previously closed app. This "burn" doesn't go away unless I turn the computer off for about 10-15 minutes. But using the PC as usual always brings the same effect.

  I am not running any unusual software or configurations bizaar. I tested this on different levels of brightness and 40 Hz and 60 Hz, but the problem still persists.

  Nowhere can shed some light on whether this is a normal occurrence on the Duo 11? If this is not the case, what steps to follow recommended action?

  Thank you!

  Someone has some feedback to help solve this problem?

• Setup Motorola Atrix with Google TV via a HDMI device problem, help?

  I'm curious to know if anyone has had problems with implementation of devices via HDMI or using the Motorola Atrix (I'll be crossed this announcement on the forums Android and Motorola too to see what response I'll be there too).

  "After connecting my Atrix, turned to the Google TV (29') using the HDMI cable I got with the phone, I go to 'Settings' > 'Video input' > HDMI settings" > "Device list" > and click on "Enable", I get an error message that says:

  No HDMI devices have been found. Please check the connections.

  Thanks to a default function I chose, the "remote control" screen on my Atrix.

  I tried all four cards HDMI on the TV and received the same error message.

  Anyone would be able to help me solve this?

  I have the Sony NSX24GT1 24 and my phone is a Motorola Atrix Mobile phone black MB860 running on the Android 2.3.4 version.

  p.s. I really like my phone and I really like my TV and the possibility of using the two together! I really hope I can get help with this. Thank you!!

  Fixed! I had to press the input button on the very complicated, heavy Google TV remote control button (bad design).

• Windows sending problem - HELP!

  Everything worked very well until they sent an email with a Word document, including photos.

  This email took a time and then everything just disappeared.  It is not in the drafts box, box has sent or Outbox.  He disappeared and since then I can not send e-mails.

  They disappear after sitting there ages or just simply sit in the box.

  I am their correct reception and the Internet works fine.  I can use a separate yahoo account.

  I tried to download 32 and 64A proposed to the 1 page but a window popped up saying that my system does not support the download.

  I'm using Vista, but I have no idea what kind of huge list available.

  Does anyone know how I can fix this.  Its quite important that I send to put in place a Justgive sponsor link to raise funds for the JDRF and type 1 diabetes.

  Thank you in anticipation

  mgstwenty

  The event viewer is an advanced tool that displays detailed information about important events on your computer. It can be useful when troubleshooting problems and errors with Windows and other programs.  http://windowshelp.Microsoft.com/Windows/en-us/help/a99f69c1-935f-4116-ba5f-33d8800ef9da1033.mspx

  Is there a new program or programs that you have installed?

  You can do a test to see if it's your account or something else by creating a new account to test the problem.
  http://windowshelp.Microsoft.com/Windows/en-us/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Please let us know Justin M. Microsoft Support Engineer Answers visit our Microsoft answers feedback Forumand let us know what you think.

• CLIQ XT 1.31.44 - touchscreen problems (HELP)

  I just started having a problem where the touch screen is crazy and continues pressing on and highlighting the top textfield, the point, the password box, etc. I could not connect on my phone because I put the digital password and he kept clicking on the upper area and I couldn't enter any number. When he would record my touch input it would mess up the code anyway because it will affect the first character.

  For example, my access code is 7399. When I hit 73 he would get the 7 then the cursor appears before the seven, I7, indicating a tactile input event. The three would end up in front of the 7, I37. (for this example I have = cursor)

  So I did a reset and his past again when I try to turn on wifi it starts to turn wifi on and outside sparadtically. Also there occansionally lowers the notification after a minute bar. Need help on this young man. Phone was working fine an hour ago.

  Paul-

  Can you try a manual Master Reset(Recovery mode and then a wipe) and then try again? If it still doesn't work I'll have a phone in the mail you tomorrow.

  Mark

  Support Forums Manager

• !!!!!!!! PC problem HELP!

  Okay I shut down my pc the other night and that I posted before I had a problem with c:\windows\system32\cdd.dll but I backed up and cost to fix but I think not

  instead of fading on vista, it went straight to the bsod and said something about memory management now a dignostic of system say memory was fine that I upgraded my ram to 4 to 6 GB, that I don't want to really having to replace anything inside yet once if I don't

  So I started this morning he initialized right to a bsod with no errors but the ntfs.sys file and now it wont even boot

  Is there a memory scanner THAT WORKS WITH 64 Bit Vista or something that can solve my problem

  HELP ME PLEASE!

  Some info

  Model: m9458f

  Processor: Intel Core 2 Quad Q6600

  6.00 GB Ram

  ATI Radeon HD 3650

  500 GB HD

  Vista Home Prenium 64-bit

  Help!

  What happened right after that you put the memory?

  The c:\windows\system32\cdd.dll could be associated with memory.

  NTFS is your file system format. This file being messed up is not good. You will probably need your windows installation den. Perhaps, you can perform a restore of Windows or a resumption of hp?

  You can launch recovery options on startup: http://support.hp.com/us-en/document/c00814731

• "NTLDR is missing. Press CTRL-ALT-DEL to restart"is the error message I get every time I try to go on my laptop. What can I do to solve this problem, help!

  I use a Packard Bell laptop and this happens everytime I try to turn on my computer. When I restart it, the same message so I'm never able to use it. Your help will be very appreciated.

  Hi THOBO90,

  1. When did you start to question?

  This problem may occur if the MFT root folder is very fragmented. If the MFT root folder contains many files, the MFT might become fragmented to an additional allocation index is created.

  Try the following steps to resolve the problem:

  Step 1:

  Boot with the Windows XP CD in Recovery Console.

  b. Copy NTLDR and NTDETECT.COM on C: drive i386 folder.

  c. attempts to boot to the desktop.

  If not able, follow these steps.

  Step 2:

  In Recovery Console, run 8 following commands (press ENTER after each line):

  a. CD of the

  b. ATTRIB C:\boot.ini h

  c. ATTRIB C:\boot.ini-s

  d. ODILE r C:\boot.ini

  e. del boot.ini

  f. BOOTCFG /Rebuild

  g. Add to the startup folder

  Step 3:

  If you can start Windows, but get a message saying that the boot.ini file is not valid.

  a.Create a new boot.ini in Notepad and saved on the hard drive.

  EXAMPLE:

  [boot loader]

  timeout = 30 default = multi (0) disk (0) rdisk (0) partition (1) \WINDOWS

  [operating systems]

  "multi (0) disk (0) rdisk (0) partition (1) \WINDOWS="Microsoft Windows XP Edition family.

  / fastdetect

  For more information, see the following KB articles:

  Consult the 330184 KB and follow step 8.

  "Invalid Boot.ini" or "Windows did not start" error messages when you start your computer

  http://support.Microsoft.com/kb/330184

  Windows may not start and you may receive an error message "NTLDR is missing" If Windows is not up-to-date and there are too many files in the root folder

  http://support.Microsoft.com/kb/320397

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Win Vista update problems - help on 31/05/13.

  I downloaded Win Vista updates, when installing updates, that seemed to be getting picked up in 15 of the 27 update.  If it stalls, should I try to download updates from windows updates again?  Now, the internet explore is dead and when I reconnected it in the internet it restarted the update where it left off.    Please let me know what I can do to get my updates again smoothly?

  Hi ARMinnesota,

  1. what happens when you open Internet Explorer?

  2 when running windows update, you get an error message or error code?

  Refer to the steps in the following Microsoft article and check if that helps.

   

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2: http://support.microsoft.com/kb/2509997

  Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services: http://support.microsoft.com/kb/906602

  Notes:

  
  The following steps include changing the system registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Back up the registry: http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

   

  CHKDSK: Data files that are infected can be cleaned by removing the file completely, which means that there is a risk of data loss.

  The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The data files that are infected can be cleaned by removing the file completely, which means that there is a risk of data loss.

  Keep us informed on the status of the issue.

• Windows product key sticker blur problem, could not find the windows product key

  My vista product key are blur already, can't see the right key and my laptop just using my notebook DVD restore, now the product key are different, after I restored it only get three days can use, obtain sort can find my own product key? (I only have the sticker behind my laptop, and it's blur...)

  You must contact your laptop manufacturer and ask them for help.