server model has changed

Similar Questions

• HPCM error - definition model has changed since the last calculation

  Hello world
  
  I have a bit of a problem on an application Coordinator.
  
  (1) message warning when I go to balancing-> "model has changed since the last calculation."
  (2) message when I select cube considered in balancing-> 'the database has not been updated with the latest results of calculation."
  
  What has been done before I got to this point:
  
  (1) add a few lev 0 members in the current hierarchy for cost center
  (2) run a comparison to check if they are picked up (OK!)
  3) deploy EPMA (result: SUCCESSFUL message)
  4) go to HPCM and deploy the two cubes (OK-> at least is what the status of the job)
  (5) control of new members in OTL (OK! they are there)
  (6) the HPCM Calc launch, check the box to erase all data of calc prev, check the box to regenerate calcs, check the box to transfer data to the reporting cube.
  result: employment status: OK!
  
  But in reality: never got transferred through to the reporting cube.
  
  I repeated steps 1 through 6, a few times, I even changed something in the (alias) shared library to check if it went through.
  In EPMA it says that the app is 'in sync with the deployment. And when I run a comparison with deployed application, it does not pick up anything.
  
  Any ideas?
  
  Thank you
  
  Kind regards
  Annie

  Hello world

  Just realised I never came back with the answer to my question. I was developing the new application and starts the compilation of the Calc sequentially, so while I was developing Calc for step 2 or 3, rebuild only those scripts are calculate only the specific areas. This is the reason why I received this message. As soon as I transferred both apps and recalculated at the beginning, the error message disappeared.
  Just in case someone wondered.

  See you soon,.
  Annie

• Satellite 1905-S301: laptop model name Virus has changed?

  I think that my Satellite 1905-S301 has been exposed to a virus. This is the worst I've ever seen: he has removed my firewall (Zonealarm), antivirus (AVG free) and Spybot. disabled Center Windows XP security, firewall and automatic update; I am unable to go to safemode (blue screen on startup); and I can not yet use the recovery CD because it has changed my machine to a 1900-801. This virus seems like it has intelligence.

  Anyone know how I can force the recovery CD to restore my system?

  What about first formatting the entire HARD disk, then use the Toshiba Recovery CD.
  This should help.
  I don t think that the virus has changed something in the DMI and changed the model number of the laptop.

• Fact the construction project ' C:\Program Files (x 86) \VMware\vCAC\Server\Model "(InstallRepoModel target - has FAILED.

  
  People

  I implement a distributed vCAC installation. Load Balancing is a netscaler vpx and I use Comodo signed certs. I'm pulling my hair out here.

  Anyone has an idea of what could be the cause of root for the build fails at this point every time?

  -----------------------------------------

  News: 2014-05-07 09-04 45 284 PM: to System.Data.Services.Client.BatchStream.ReadBuffer)

  News: 2014-05-07 09-04 45 284 PM: to System.Data.Services.Client.BatchStream.ReadDelimiter (Byte [] buffer, Int32 count, Int32 offset)

  News: 2014-05-07 09-04 45 284 PM: to System.Data.Services.Client.BatchStream.Seek (Int64, SeekOrigin origin offset)

  News: 2014-05-07 09-04 45 284 PM: to System.Data.Services.Client.BatchStream.StreamWithLength.Dispose (Boolean disposing)

  News: 2014-05-07 09-04 45 284 PM: to the System.IO.Stream.Close)

  News: 2014-05-07 09-04 45 284 PM: to System.Data.Services.Client.BatchStream.MoveNext)

  News: 2014-05-07 09-04 45 284 PM: to d__1e System.Data.Services.Client.DataServiceContext.SaveResult. < HandleBatchResponse >. MoveNext()

  News: 2014-05-07 09-04 45 300 PM: to System.Data.Services.Client.DataServiceContext.SaveResult.HandleBatchResponse)

  News: 2014-05-07 09-04 45 300 PM: to System.Data.Services.Client.DataServiceContext.SaveResult.EndRequest)

  News: 2014-05-07 09-04 45 300 PM: to System.Data.Services.Client.DataServiceContext.SaveChanges (SaveChangesOptions, options)

  News: 2014-05-07 09-04 45 300 PM: to DynamicOps.Repository.RepositoryServiceContext.SaveChanges (SaveChangesOptions, options)

  News: 2014-05-07 09-04 45 300 PM: to DynamicOps.Tools.Common.SecurityHelpers.InstallSecurityConfig (config securityConfig, String httpRootRepository)

  News: 2014-05-07 09-04 45 300 PM: at DynamicOps.Tools.Common.ModelHelpers.InstallModel (String assemblyFileName, String securityFileName, String server, catalog of, string userName, String password, String httpRootRepository)

  News: 2014-05-07 09-04 45 300 PM: to DynamicOps.Tools.Repoutil.Commands.ModelInstallCommand.Execute (CommandLineParser Analyzer)

  News: 2014-05-07 09-04 45 300 PM: Warning: return nonzero code. The command failed.

  News: 2014-05-07 09 04 45 315 PM: C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\DeployRepository.xml (594,5): error MSB3073: the command "" C:\Program Files (x 86) \VMware\vCAC\Server\Model "model-Install - f" C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\DynamicOps.ManagementModel.dll "s 'cnndckppcp5018.nndc.kp.org' d 'IaasDB" - c "C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\ManagementModelSecurityConfig.xml"-v "came out with code 1.

  News: 2014-05-07 09-04 45 315 PM: construction project is "C:\Program Files (x 86) \VMware\vCAC\Server\Model" (InstallRepoModel target - has FAILED.

  News: 2014-05-07 09-04 45 315 PM: Build FAILED.

  News: 2014-05-07 09-04 45 315 PM: "C:\Program Files (x 86) \VMware\vCAC\Server\Model" (target InstallRepoModel) (1)->

  News: 2014-05-07 09-04 45 315 PM->:(InstallRepoModel target)

  News: 2014-05-07 09 04 45 315 PM: C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\DeployRepository.xml (594,5): error MSB3073: the command "" C:\Program Files (x 86) \VMware\vCAC\Server\Model "model-Install - f" C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\DynamicOps.ManagementModel.dll "s 'cnndckppcp5018.nndc.kp.org' d 'IaasDB" - c "C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\ManagementModelSecurityConfig.xml"-v "came out with code 1.

  News: 2014-05-07 09-04 45 315 PM: 0 warning (s)

  News: 2014-05-07 09-04 45 PM 315: 1 error (s)

  News: 2014-05-07 09-04 45 315 PM: time 00:05:38.13

  --------------------------------------------------

  Thank you originaly.

  This looks more like a problem of connectivity to the server that you install in the repository.

  It could be the configuration of the network, firewall or something else, but you do not reach the repository

  Can you open

  C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\RepoUtil.exe.config and locate the repositoryAddress.

  Add "/ repository/Data/managementmodelentities.svc" and try to go through.

• file on the remote server has changed

  Downloading changes daily I often receive a warning popup that

  upploadare has changed on the server remote (date) since your last get or put operation. Put the file can overwrite changes in the file. You want to place the file anyway?

  

  In Dreamweaver CS5, I always click on the Yes to all button. In Dreamweaver CC dialog box appears, but is hidden behind the active window in Dreamweaver. There is no way to divert attention from the pop-up window. The solution is to make the active little Dreamweaver window, exposing so the center of the desktop, before put the files.

  Is it just me or everyone knows this problem?

  I use Dreamweaver 2014.1.1 Release, Build 6981 CC.

  Thank you.

  John

  This problem is fixed in the new version of Dreamweaver Creative Cloud 2015. Adobe would like to thank you!

• Is Microsoft Licensing has changed for server products?

  Dear all,

  We got the information that Microsoft has changed its licensing of what she felt earlier.

  We opened the folder with VMware support, but they are not as that educated to understand what the customer asks.

  So we thought that we will put Jules Destrooper before you all people.

  Earlier:

  Each VM required to get a license .

  Now:

  If we load Windows Server Enterprise Edition, and then three numbers of VM instances are FREE

  Is this correct?

  Comments welcome!

  . : : [ [a s h X ]]: : .

  If you have Windows Server Standard VMs then each VM should have its own license.

  Windows Enterprise allows you to run 4 virtual machines on a particular host (more host if you want, but only to support VMs, or host more than 3 VMs).

  Windows Datacenter allows you to run an unlimited number of virtual machines on the particular host.

  ---

  MCSA, MCTS, VCP, VMware vExpert 2009

  http://blog.vadmin.ru

• "The current version of the database has changed since... "Error

  Now I downloaded my application at the APEX. ORACLE.COM and my workspace is PSGCA and I have problems with the page 310 - details of the Bill.  How can I get the APEX. ORACLE.COM gurus to look over the page?  I'm having a problem with the part detail of this master-detail page.  Specifically, if I add data or update data to the captain only section, no problem.  This is when I need to update the data on the detail starting with my problems section!  If I add to the start of the line, no problem.  If I add information to a field null, no problem.  The problem arises when I want to change the HOURS/DAYS and COSTS.  He will take the initial value, but if I want to change then I get the error "database version has changed since... »

  No indication of this error would be greatly appreciated!

  Do you guys need for me to add table definitions and sample data.  In the past, I was told that it was not necessary; everything you had needed was the page.

  Is this correct?

  Can I add data and table definitions?

  For some reason that I could reduce it to the format mask on the expenditures column, which has been

  999G999G999G999G990D00PR
  

  When I changed it to

  999G999G999G999G990D00
  

  everything magically started working.

  For people wondering about the PR:

  PR

  9999PR

  Returns negative value in . Returns the positive value with a beginning and end empty. Restriction: The PR format item can only appear in the last position of a model number format.

  Documents: http://docs.oracle.com/cd/B19306_01/server.102/b14200/sql_elements004.htm

  I'm not sure why this particular mask causes. Because checksums are generated, I ran this sql to take a guess:

  select
  DBMS_OBFUSCATION_TOOLKIT.md5 (input => UTL_RAW.cast_to_raw(exp1)) md5_val1,
  DBMS_OBFUSCATION_TOOLKIT.md5 (input => UTL_RAW.cast_to_raw(exp2)) md5_val2,
  DBMS_OBFUSCATION_TOOLKIT.md5 (input => UTL_RAW.cast_to_raw('1.00')) md5_val1_1,
  DBMS_OBFUSCATION_TOOLKIT.md5 (input => UTL_RAW.cast_to_raw('1.00')) md5_val2_2
  from (
  select
  expenses exp1,
  to_char(expenses,'999G999G999G990D00PR') exp2
  from invoice_details
  ) a
  

  which produces this output.

  MD5_VAL1	MD5_VAL2	MD5_VAL1_1	MD5_VAL2_2
  C4CA4238A0B923820DCC509A6F75849B	4DF59D42C9EE6119AEB2ADC95E7B7CF6	41CF2677CC4EC9356DAD8E76DFB87448	41CF2677CC4EC9356DAD8E76DFB87448

  Still not sure, but maybe it's to do with how and when checksums are generated?

  A space of drawing here - as you can see there is no guru, ace or oracle badge under my name, so I'm sure

  I've made changes on page 310, make backup to 24 but probably is not serious because your application is local. Probably no danger of change your credentials and/or remove your application.

  impressive effort on the example. This helps us better help you!

• Applying the DW model to changes in coding pages

  I turned the PHP files that were provided to me in models DW (CS5) because I need to test the conversion of an existing site that uses coherent models of DW to use these 'models' mandatory. PHP files that gave me are encoded in UTF - 8 (verified), HTML5, with the proper definition in the html code.  When I create a new file to test, HTML5 with UTF-8 encoding, files and templates also appear correctly in DW Live View and the browser. However, when I apply the model to the test page, the encoding gets changed to ANSI format (as identified by Notepad ++). Therefore, accented characters are broken.  It's not happen with other files. Configuration of PHP on the server is set to UTF-8 encoding by default.

  PHP files contain a lot includes, as well as some jquery, and the server is IIS7 on a box of Win 2008 Server (with PHP installed, of course). Does anyone have an idea what I'm looking for?  I'm assuming that there may be something in the php or js files causing the hiccups. But I won't be surprised if I missed something simple and do not see the forest for the trees. Thanks for any help.

  I seem to have accidentally stumbled upon a work-around - there is not much sense, but it does not tie in with the idea that this is a bug in Dreamweaver. (See the thread at http://forums.adobe.com/message/2272888#2272888 )

  When I checked the properties of the page on all files, I also checked that the form of Unicode normalization (in the properties of the Page) has been set at C - which is the default - and he never thought much more.

  Well, grasping at straws, I thought I'd try to put (the model) to KC instead, knowing that it was * not * what I wanted, and confirm with the files resulting after the model has been applied to a page that the behavior of the evolution of the characters to entities was certainly not what I wanted. I would like to move away from using character entities.

  So I changed to C and re-registered model.

  For some reason any - BINGO - once applied, encoding of this file has been changed is no longer in the ANSI format.

  I and my colleague tried with many models - whenever a template file is left in the 'proper' Unicode normalization form it gets changed to ANSI format.  If break us by changing to KC, save it, then attach it to switch back on C and save it again, it works as it should in the first place.

  Wobbly but get around pretty quick, so I'll breathe a sigh of relief!

• Translator - ICERegions.htm &amp; SSI.htm of server model load error

  I've recently updated my installation of Adobe Dreamweaver CS4 (of Adobe CS4 Design Premium) using your automatic update feature.  About a day later, I was working in Mode APP DEVELOPER MORE and noticed that a few lines of text changed color in the document.  I changed the orientation of the view code and access these provisions of the code and noticed one unusual element "police" surrounding each of the updated text internal.

  Shortly after the change in focus to the designer pane a modal dialog box alert appeared with the following text:

  "The following translators were not loaded due to errors: ICERegions.htm: contains configuration information that his draw."  Server model SSI.htm: has configuration information that is invalid. ' (see image below)

  

  What does this mean error (I don't see no link with javascript).

  Brett

  PS-

  My system consists of the following:

  OS: Windows XP Professional

  Processor: Intel Core 2 Duo E8500, 3.16 GHz CPU

  Memory: 2048 MB

  I just wanted to let people know who may be affected by the same error that I also had this problem. To fix this try the following steps.

  1) close Dreamweaver CS4

  2) sail to:
  C:\Documents and Settings\ [UserName] \Application Data\Adobe\Dreamweaver CS4\ [language] \Configuration

  3) rename (I do not delete things just wrap I need later for some reason any):

  WinFileCache-[numbers] .dat to WinFileCache-[numbers] old.dat

  
  

  4) launch Dreamweaver CS4

  The issue has disappeared and are no longer due in 4 simple steps. She also started happening after a recent update.

  Happening throughout coding, when I loaded a file, and when I saved a file. I hope this helps someone, thank you for all the advice above me!

• MBP has changed to new iMac - the problem persists

  Hello ladies and gentlemen!

  I can't believe I'm still having the same problem after a water landing forced my MBP mid-2012 and invest a lot of money in the new iMac. Now I'm sure this is the problem of the El Capitan, not the hardware. Especially after the last update of the system.

  Everything was going fine until last week when my iMac suddenly started to have some kind of hiccups - mouse ceased to answer at any time (100% battery), pages began to load really slow and sometimes only has not at all and Adobe apps began to plant without any particular reason. Nothing has changed and I haven't done anything unusual when it was absolutely new and running like a beast.

  The thing that is interesting to me is the use of the CPU and RAM. (It a few months ago when I had the problem with MBP), I noticed that when you open a page in Safari (any type of page) and let it stay there for a few days it starts to use a LOT of material in the background, even if you have completely forgotten this page and did not open it / refresh it for a long time - screenshots below. Why the hell is happening? I do not understand why Safari does need juice both by the love of God because no matter how much it will be, he will use it. I thought that changing from 8GB to 32GB it will solve the problem. Boy, I was wrong...

  EtreCheck version: 2.9.13 (267)

  Report generated 2016-07-07 14:44:42

  Download EtreCheck from https://etrecheck.com

  Time 01:28

  Performance: Excellent

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Problem: Computer is too slow

  Hardware Information: ⓘ

  iMac (retina 5K, 27 inches, end of 2015)

  [Data sheet] - [User Guide] - [warranty & Service]

  iMac - model: iMac17, 1

  1 4 GHz Intel Core i7 CPU: 4 strands

  32 GB of expandable RAM - [Instructions]

  BANK 0/DIMM0

  8 GB DDR3-1867 MHz ok

  0/DIMM1 BANK

  8 GB DDR3-1867 MHz ok

  BANK 1/DIMM0

  8 GB DDR3-1867 MHz ok

  BANK 1/DIMM1

  8 GB DDR3-1867 MHz ok

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: en1: 802.11 a/b/g/n/ac

  Video information: ⓘ

  AMD Radeon R9 M395X - VRAM: 4096 MB

  iMac 5120 x 2880

  Software: ⓘ

  OS X El Capitan 10.11.4 (15E65) - time since started: about one day

  Disc information: ⓘ

  APPLE SSD SM0512G Disk0: (500,28 GB) (Solid State - TRIM: Yes)

  EFI (disk0s1) < not mounted >: 210 MB

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  Macintosh HD (disk 1) /: 499,06 (Go 181,15 free)

  Storage of carrots: disk0s2 499.42 GB Online

  USB information: ⓘ

  Broadcom Corp. Bluetooth USB host controller.

  Apple Inc. FaceTime HD camera (built-in)

  Lightning information: ⓘ

  Apple Inc. Thunderbolt_bus.

  Guardian: ⓘ

  Mac App Store and identified developers

  Kernel extensions: ⓘ

  / Library/Extensions

  com [loading]. Cycling74.driver.Soundflower (2.0b2 - SDK 10.10 - 2016-06-03) [Support]

  / System/Library/Extensions

  TL.UDs.netusb.controller [no charge] (1.59-2016-06-03) [Support]

  Launch system officers: ⓘ

  [loaded] 7 tasks Apple

  [loading] 150 tasks Apple

  [operation] 80 tasks Apple

  [killed]    A spot of Apple

  one killed process lack of RAM

  Launch system demons: ⓘ

  [loaded] 45 tasks Apple

  [loading] 147 tasks Apple

  [operation] 95 tasks Apple

  [killed]    A spot of Apple

  one killed process lack of RAM

  Launch officers: ⓘ

  [no charge] com.adobe.AAM.Updater - 1.0.plist (2016-07-06) [Support]

  [failure] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a... plist (2016-05-17) [Support]

  [operation] com.adobe.AdobeCreativeCloud.plist (2016-04-12) [Support]

  com.TeamViewer.TeamViewer.plist [no charge] (2016-03-20) [Support]

  com.TeamViewer.teamviewer_desktop.plist [no charge] (2016-03-20) [Support]

  Launch demons: ⓘ

  [loading] com.adobe.ARMDC.Communicator.plist (2016-05-17) [Support]

  [loading] com.adobe.ARMDC.SMJobBlessHelper.plist (2016-05-17) [Support]

  [operation] com.adobe.adobeupdatedaemon.plist (2016-06-10) [Support]

  [loading] com.adobe.agsservice.plist (2016-04-12) [Support]

  [loading] com.adobe.fpsaud.plist (2016-05-10) [Support]

  [loading] com.teamviewer.Helper.plist (2016-02-01) [Support]

  com.TeamViewer.teamviewer_service.plist [no charge] (2016-03-20) [Support]

  User launch officers: ⓘ

  [loading] com.adobe.AAM.Updater - 1.0.plist (2016-02-08) [Support]

  com.apple.CSConfigDotMacCert [fail]-[...] @me.com - SharedServices.Agent.plist

  [loading] com.google.keystone.agent.plist (2016-06-15) [Support]

  [loading] com.nylas.plist (2016-02-08) [Support]

  [operation] com.spotify.webhelper.plist (2016-07-02) [Support]

  [loading] com.synology.CloudStation.plist (2016-03-26) [Support]

  [loading] com.synology.CloudStationBackup.plist (2016-03-31) [Support]

  [loading] com.valvesoftware.steamclean.plist (2016-04-21) [Support]

  Items in user login: ⓘ

  Dropbox application (/ Applications/Dropbox.app)

  Other applications: ⓘ

  [performance]    QA2G25RMZ4.com.Wunderkinder.Wunderlist - helper

  [ongoing] com.adobe.CCLibrary.135392

  [ongoing] com.adobe.CCXProcess.154272

  [ongoing] com.adobe.Photoshop.200672

  [operation] com.adobe.acc.AdobeDesktopService.87712.37C33553-9150-46E9-8A00-4875B24C79E1

  [ongoing] com.Adobe.accmac.185632

  [ongoing] com.Adobe.Illustrator.209312

  [ongoing] com.getdropbox.dropbox.165472

  [ongoing] it.Bloop.airmail.beta11.200032

  [loading] 390 tasks Apple

  [operation] 219 tasks Apple

  [killed]    A spot of Apple

  Plug-ins Internet: ⓘ

  AdobeAAMDetect: 3.0.0.0 - SDK 10.9 (2016-06-10) [Support]

  FlashPlayer - 10.6: 21.0.0.242 - SDK 10.6 (2016-06-07) [Support]

  QuickTime Plugin: 7.7.3 (2016-04-23)

  AdobePDFViewerNPAPI: 15.010.20060 - SDK 10.8 (2016-04-08) [Support]

  AdobePDFViewer: 15.010.20060 - SDK 10.8 (2016-04-08) [Support]

  Flash Player: 21.0.0.242 - SDK 10.6 (2016-06-07) obsolete! Update

  Default browser: 601 - SDK 10.11 (2016-04-23)

  npSurveillancePlugin_1.0.0.934: SurveillancePlugin_x86_64 1.0.0.934 - SDK 10.6 (2016-04-09) [Support]

  Safari extensions: ⓘ

  Instapaper - Instapaper Holdings Inc. - http://www.instapaper.com (2016-05-06)

  Ka-block! -David Graham & Josh Peek - http://kablock.com (2016-04-21)

  Save on Pocket - Read It Later, Inc. - http://getpocket.com/ (2016-02-07)

  MeasureIt - Kevin Freitas - http://frayd.us/extensions/measureit/ (2010-10-04)

  EverNote Web Clipper - Evernote Corp. - http://evernote.com (2016-05-23)

  PIN button - Pinterest, Inc. - http://www.pinterest.com/ (2016-02-07)

  3rd party preference panes: ⓘ

  Flash Player (2016-05-10) [Support]

  WDQuickView (2016-04-08) [Support]

  Time Machine: ⓘ

  Mobile backups: OFF

  Automatic backup: YES

  Volumes to back up:

  Macintosh HD: Disc size: 499,06 GB disc used: 317,90 GB

  Destinations:

  EIGHTY9_BACKUP [network]

  Total size: 11.80 TB

  Total number of backups: 31

  An older backup: 04/10/16 05:37

  Last backup: 07/07/16 13:00

  Size of backup drive: Excellent

  Size of backup 11.80 TB > (disk size 499,06 GB X 3)

  Top of page process CPU: ⓘ

  com.apple.WebKit.WebContent (20) 99%

  5% WindowServer

  4% adobe CEF Helper (2)

  CEPHtmlEngine 3% Helper (14)

  2% fontd

  Top of page process of memory: ⓘ

  11,58 GB com.apple.WebKit.WebContent (20)

  1.90 GB kernel_task

  Helper (14) CEPHtmlEngine 721 MB

  CEPHtmlEngine (7) 393 MB

  Safari of 328 MB

  Virtual memory information: ⓘ

  11.00 GB of free RAM

  21 h 00 GB used RAM (3.35 GB being cached)

  3.43 Go Swap used

  Diagnostic information: ⓘ

  7 July 2016, 14:20:28 ~/Library/Logs/DiagnosticReports/Adobe Desktop Service_2016-07-07-142028_ [redacted] .crash

  com.adobe.acc.AdobeDesktopService - / Library/Application Support/Adobe / * / Adobe Office Service.app/Contents/MacOS/Adobe Office Service

  July 6, 2016, 13:59:57 / Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_2016-07-06-135957_ [redacted].cpu_resource.diag [details]

  System/Library/Frameworks/WebKit.Framework/versions/A/XPCServices/com. Apple.We bKit.WebContent.xpc/Contents/MacOS/com.apple.WebKit.WebContent

  6 July 2016, 13:52:45 self test - passed

  July 5, 2016, 14:12:39 / Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_2016-07-05-141239_ [redacted].cpu_resource.diag [details]

  

  I wonder about these extensions Safari and internet plug-ins.

  Safari, as all browsers, I fear, is a memory hog.

  As a temporary solution, simply exit and restart Safari can mitigate the problem.

• A server error has occurred, the Profile Manager after upgrade to osX - 10.11.4 server 5.1

  After the Connection Manager profile with safari and firefox, I get this error message after my upgrade to el captian 10.11.4 and upgrade to Server 5.1.

  "A server error has occurred, please reload the page and try again.

  If this error " persists, please contact your administrator"

  Someone who could give me advice where to start troubleshooting?

  THE SERVER LOG

  PROFILEMANAGER

  Service log:

  ######################################################################

  ##############     START          ###########################################

  ######################################################################

  [738] [08/04/2016 17:48:56.170] I: completed in 232ms s (view: 1, DB: 62). 200 OK [https://macserver.elcapitan.com/magic/do_magic]

  [733] [08/04/2016 18:51:53.312] I: treatment MagicController #admin_will_load (for 1.1.1.1 at 2016-04-08 18:51:53) [POST]

  [733] [08/04/2016 18:51:53.488] I: completed in 157ms (view: 1 DB: 9) | 200 OK [https://macserver.elcapitan.com/magic/admin_will_load]

  [734] [08/04/2016 18:51:54.555] I: treatment MagicController #do_magic (for 1.1.1.1 to the 2016-04-08 18:51:54) [POST]

  [734] [08/04/2016 18:51:55.346] I: completed in 790ms (views: 0dB,: 92). 200 OK [https://macserver.elcapitan.com/magic/do_magic]

  [735] [08/04/2016 18:51:55.476] I: treatment MagicController #do_magic (for 1.1.1.1 to the 2016-04-08 18:51:55) [POST]

  [737] [08/04/2016 18:51:55.712] I: treatment MagicController #do_magic (for 1.1.1.1 to the 2016-04-08 18:51:55) [POST]

  [738] [08/04/2016 18:51:55.741] I: treatment MagicController #do_magic (for 1.1.1.1 to the 2016-04-08 18:51:55) [POST]

  [735] [08/04/2016 18:51:55.773] I: completed in 296ms (view: 0, DB: 73). 200 OK [https://macserver.elcapitan.com/magic/do_magic]

  [739] [08/04/2016 18:51:55.841] I: treatment MagicController #do_magic (for 1.1.1.1 to the 2016-04-08 18:51:55) [POST]

  [738] [08/04/2016 18:51:55.892] I: completed in 151ms (view: DB, 0: 18) | 200 OK [https://macserver.elcapitan.com/magic/do_magic]

  [737] [08/04/2016 18:51:55.943] I: completed in 230ms (view: 0, DB: 60). 200 OK [https://macserver.elcapitan.com/magic/do_magic]

  [739] [08/04/2016 18:51:55.980] E: \253Magic#do_magic-> UserGroup.get_profiles\273 taken unsupported constant not initialized exception InactiveUserGroup to /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /ruby/1.9.1/gems/activesupport-2.3.18/lib/active_support/dependencies.rb:469:in 'load_missing_constant '.

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /ruby/1.9.1/gems/activesupport-2.3.18/lib/active_support/dependencies.rb:106:in "const_missing_with_dependencies".

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/lib/MD m_library_item_base.rb:22: in 'const_get '.

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/lib/MD m_library_item_base.rb:22: in 'library_item_by_id '.

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/app/Mo dels / profile .rb: 276: in 'owner '.

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/app/Mo dels / profile .rb: 250: in "library_item_type".

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/app/Mo dels / profile .rb: 257: in "modify_attributes".

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/lib/MD m_record_base.rb:184: in 'get_attributes.

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/app/he FPL / user_group_helper.rb:85: in 'get_profiles '.

  "/Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/App/co ntrollers / magic_controller.rb:180: in ' block ' (5 levels) in do_magic.

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /ruby/1.9.1/gems/activesupport-2.3.18/lib/active_support/core_ext/benchmark.rb:1 7: in "block in ms.

  /Applications/server.app/Contents/ServerRoot/usr/lib/Ruby/1.9.1/benchmark.rb:29 5: in 'real time '.

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /ruby/1.9.1/gems/activesupport-2.3.18/lib/active_support/core_ext/benchmark.rb:1 7: in "ms."

  "/Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/App/co ntrollers / magic_controller.rb:180: in ' block ' (4 levels) in do_magic.

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /ruby/1.9.1/gems/activerecord-2.3.18/lib/active_record/connection_adapters/abstr act / database_statements.rb:136: in "transaction".

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/config /initializers/dm_rails_monkey_patches.rb:152:in "transaction".

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /ruby/1.9.1/gems/activerecord-2.3.18/lib/active_record/transactions.rb:182:in "transaction".

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/lib/MD m_utilities.rb:242: in 'process_in_transaction '.

  "/Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/App/co ntrollers / magic_controller.rb:163: in ' block ' (3 levels) in do_magic.

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/app/co ntrollers / magic_controller.rb:146: in 'each '.

  "/Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/App/co ntrollers / magic_controller.rb:146: in ' block ' (2 levels) in do_magic.

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/app/co ntrollers / magic_controller.rb:137: in 'each '.

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/app/co ntrollers / magic_controller.rb:137: in 'block in do_magic'

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/app/co ntrollers / magic_controller.rb:127: in 'each '.

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/app/co ntrollers / magic_controller.rb:127: in 'do_magic '.

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /ruby/1.9.1/gems/actionpack-2.3.18/lib/action_controller/base.rb:1333:in 'perform_action.

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /ruby/1.9.1/gems/actionpack-2.3.18/lib/action_controller/filters.rb:617:in "call_filters".

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /ruby/1.9.1/gems/actionpack-2.3.18/lib/action_controller/filters.rb:638:in 'block in run_before_filters'

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/app/co ntrollers / application_controller.rb:111: in 'give_session_to_models '.

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /ruby/1.9.1/gems/activesupport-2.3.18/lib/active_support/callbacks.rb:178:in "evaluate_method".

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /ruby/1.9.1/gems/actionpack-2.3.18/lib/action_controller/filters.rb:186:in «call»

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /ruby/1.9.1/gems/actionpack-2.3.18/lib/action_controller/filters.rb:635:in "run_before_filters".

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /ruby/1.9.1/gems/actionpack-2.3.18/lib/action_controller/filters.rb:615:in "call_filters".

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /ruby/1.9.1/gems/actionpack-2.3.18/lib/action_controller/filters.rb:610:in "perform_action_with_filters".

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /ruby/1.9.1/gems/actionpack-2.3.18/lib/action_controller/benchmarking.rb:68:in 'block in perform_action_with_benchmark'

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /ruby/1.9.1/gems/activesupport-2.3.18/lib/active_support/core_ext/benchmark.rb:1 7: in "block in ms.

  /Applications/server.app/Contents/ServerRoot/usr/lib/Ruby/1.9.1/benchmark.rb:29 5: in 'real time '.

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /ruby/1.9.1/gems/activesupport-2.3.18/lib/active_support/core_ext/benchmark.rb:1 7: in "ms."

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /ruby/1.9.1/gems/actionpack-2.3.18/lib/action_controller/benchmarking.rb:68:in "perform_action_with_benchmark".

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /ruby/1.9.1/gems/actionpack-2.3.18/lib/action_controller/rescue.rb:160:in "perform_action_with_rescue".

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /ruby/1.9.1/gems/actionpack-2.3.18/lib/action_controller/flash.rb:151:in "perform_action_with_flash".

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /ruby/1.9.1/gems/actionpack-2.3.18/lib/action_controller/base.rb:532:in "process".

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /ruby/1.9.1/gems/actionpack-2.3.18/lib/action_controller/filters.rb:606:in "process_with_filters".

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /ruby/1.9.1/gems/actionpack-2.3.18/lib/action_controller/base.rb:391:in "process".

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /ruby/1.9.1/gems/actionpack-2.3.18/lib/action_controller/base.rb:386:in «call»

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /ruby/1.9.1/gems/actionpack-2.3.18/lib/action_controller/routing/route_set.rb:43 8: in 'call '.

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /ruby/1.9.1/gems/actionpack-2.3.18/lib/action_controller/dispatcher.rb:87:in 'send '.

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /ruby/1.9.1/gems/actionpack-2.3.18/lib/action_controller/dispatcher.rb:121:in "_Appel".

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /ruby/1.9.1/gems/actionpack-2.3.18/lib/action_controller/dispatcher.rb:130:in 'block in build_middleware_stack'

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /ruby/1.9.1/gems/actionpack-2.3.18/lib/action_controller/string_coercion.rb:25:i n 'call '.

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /ruby/1.9.1/gems/actionpack-2.3.18/lib/action_controller/string_coercion.rb:25:i n 'call '.

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /ruby/1.9.1/gems/rack-1.1.6/lib/rack/head.rb:9:in «call»

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /ruby/1.9.1/gems/rack-1.1.6/lib/rack/methodoverride.rb:24:in «call»

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /ruby/1.9.1/gems/actionpack-2.3.18/lib/action_controller/params_parser.rb:15:in «call»

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor ruby/1.9.1/gems/actionpack-2.3.18/lib/action_controller/session/abstract_store. RB: 177: in 'call '.

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /ruby/1.9.1/gems/activerecord-2.3.18/lib/active_record/query_cache.rb:29:in "call block".

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /ruby/1.9.1/gems/activerecord-2.3.18/lib/active_record/connection_adapters/abstr act / query_cache.rb:34: in 'cache '.

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /ruby/1.9.1/gems/activerecord-2.3.18/lib/active_record/query_cache.rb:9:in "cache".

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /ruby/1.9.1/gems/activerecord-2.3.18/lib/active_record/query_cache.rb:28:in «call»

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /ruby/1.9.1/gems/activerecord-2.3.18/lib/active_record/connection_adapters/abstr act / connection_pool.rb:361: in "call".

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /ruby/1.9.1/gems/actionpack-2.3.18/lib/action_controller/failsafe.rb:26:in «call»

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /ruby/1.9.1/gems/rack-1.1.6/lib/rack/lock.rb:11:in "call block".

  < internal: Prelude >: 10: in 'synchronize '.

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /ruby/1.9.1/gems/rack-1.1.6/lib/rack/lock.rb:11:in «call»

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /ruby/1.9.1/gems/actionpack-2.3.18/lib/action_controller/dispatcher.rb:106:in «call»

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /ruby/1.9.1/gems/rails-2.3.18/lib/rails/rack/static.rb:31:in «call»

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /ruby/1.9.1/gems/rails-2.3.18/lib/rails/rack/log_tailer.rb:17:in «call»

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /ruby/1.9.1/gems/thin-1.5.1/lib/thin/connection.rb:81:in "pre_process block."

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /ruby/1.9.1/gems/thin-1.5.1/lib/thin/connection.rb:79:in 'catch '.

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /ruby/1.9.1/gems/thin-1.5.1/lib/thin/connection.rb:79:in "pre_process".

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /ruby/1.9.1/gems/thin-1.5.1/lib/thin/connection.rb:54:in "process".

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /ruby/1.9.1/gems/thin-1.5.1/lib/thin/connection.rb:39:in "receive_data".

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /ruby/1.9.1/gems/eventmachine-1.0.3/lib/eventmachine.rb:187:in "run_machine".

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /ruby/1.9.1/gems/eventmachine-1.0.3/lib/eventmachine.rb:187:in 'run '.

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /ruby/1.9.1/gems/thin-1.5.1/lib/thin/backends/base.rb:63:in 'start '.

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /ruby/1.9.1/gems/thin-1.5.1/lib/thin/server.rb:159:in 'start '.

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /ruby/1.9.1/gems/thin-1.5.1/lib/thin/controllers/controller.rb:86:in 'start '.

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /ruby/1.9.1/gems/thin-1.5.1/lib/thin/runner.rb:187:in 'run_command.

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /ruby/1.9.1/gems/thin-1.5.1/lib/thin/runner.rb:152:in 'run! '

  /Applications/server.app/Contents/ServerRoot/usr/share/devicemgr/backend/thin:1 1: turnkey"< >".

  [739] [08/04/2016 18:51:55.991] F: NameError (uninitialized constant InactiveUserGroup):

  Vendor/Ruby/1.9.1/Gems/ActiveSupport-2.3.18/lib/active_support/Dependencies.RB: 469: in "load_missing_constant".

  Vendor/Ruby/1.9.1/Gems/ActiveSupport-2.3.18/lib/active_support/Dependencies.RB: 106: in "const_missing_with_dependencies".

  lib/mdm_library_item_base. RB:22: in 'const_get '.

  lib/mdm_library_item_base. RB:22: in 'library_item_by_id '.

  App/Models/Profile.RB:276:in 'owner '.

  App/Models/Profile.RB:250:in "library_item_type".

  App/Models/Profile.RB:257:in "modify_attributes".

  lib/mdm_record_base. RB:184: in 'get_attributes.

  App/helpers/user_group_helper. RB:85: in 'get_profiles '.

  App/Controllers/magic_controller. "RB:180: in ' block ' (5 levels) in do_magic.

  App/Controllers/magic_controller. "RB:180: in ' block ' (4 levels) in do_magic.

  Vendor/Ruby/1.9.1/Gems/ActiveRecord-2.3.18/lib/active_record/connection_adapter s/abstract/database_statements.rb:136:in "transaction".

  config/Initializers/dm_rails_monkey_patches. RB:152: in "transaction".

  Vendor/Ruby/1.9.1/Gems/ActiveRecord-2.3.18/lib/active_record/transactions. RB:18 2: in the "transaction".

  lib/mdm_utilities. RB:242: in 'process_in_transaction '.

  App/Controllers/magic_controller. "RB:163: in ' block ' (3 levels) in do_magic.

  App/Controllers/magic_controller. RB:146: in 'each '.

  App/Controllers/magic_controller. "RB:146: in ' block ' (2 levels) in do_magic.

  App/Controllers/magic_controller. RB:137: in 'each '.

  App/Controllers/magic_controller. RB:137: in 'block in do_magic'

  App/Controllers/magic_controller. RB:127: in 'each '.

  App/Controllers/magic_controller. RB:127: in 'do_magic '.

  Vendor/Ruby/1.9.1/Gems/actionpack-2.3.18/lib/action_controller/base. RB:1333: in 'perform_action.

  n Vendor/Ruby/1.9.1/Gems/actionpack-2.3.18/lib/action_controller/Filters.RB:617:i 'call_filters '.

  Vendor/Ruby/1.9.1/Gems/actionpack-2.3.18/lib/action_controller/Filters.RB:638:i n 'run_before_filters block '.

  App/Controllers/application_controller. RB:111: in 'give_session_to_models '.

  Vendor/Ruby/1.9.1/Gems/ActiveSupport-2.3.18/lib/active_support/callbacks. RB:178: in 'evaluate_method '.

  Vendor/Ruby/1.9.1/Gems/actionpack-2.3.18/lib/action_controller/Filters.RB:186:i n 'call '.

  n Vendor/Ruby/1.9.1/Gems/actionpack-2.3.18/lib/action_controller/Filters.RB:635:i 'run_before_filters '.

  n Vendor/Ruby/1.9.1/Gems/actionpack-2.3.18/lib/action_controller/Filters.RB:615:i 'call_filters '.

  n Vendor/Ruby/1.9.1/Gems/actionpack-2.3.18/lib/action_controller/Filters.RB:610:i 'perform_action_with_filters '.

  Vendor/Ruby/1.9.1/Gems/actionpack-2.3.18/lib/action_controller/benchmarking. RB: 68: 'block in perform_action_with_benchmark'

  Vendor/Ruby/1.9.1/Gems/actionpack-2.3.18/lib/action_controller/benchmarking. RB: 68: in "perform_action_with_benchmark".

  Vendor/Ruby/1.9.1/Gems/actionpack-2.3.18/lib/action_controller/Rescue.RB:160:in "perform_action_with_rescue".

  Vendor/Ruby/1.9.1/Gems/actionpack-2.3.18/lib/action_controller/Flash.RB:151:in "perform_action_with_flash".

  Vendor/Ruby/1.9.1/Gems/actionpack-2.3.18/lib/action_controller/base. RB:532: in 'process '.

  n Vendor/Ruby/1.9.1/Gems/actionpack-2.3.18/lib/action_controller/Filters.RB:606:i 'process_with_filters '.

  Vendor/Ruby/1.9.1/Gems/actionpack-2.3.18/lib/action_controller/base. RB:391: in 'process '.

  Vendor/Ruby/1.9.1/Gems/actionpack-2.3.18/lib/action_controller/base. RB:386: in 'call '.

  Vendor/Ruby/1.9.1/Gems/actionpack-2.3.18/lib/action_controller/Routing/route_se t.rb:438: in "call".

  Vendor/Ruby/1.9.1/Gems/actionpack-2.3.18/lib/action_controller/Dispatcher.RB:87: "send."

  Vendor/Ruby/1.9.1/Gems/actionpack-2.3.18/lib/action_controller/Dispatcher.RB:12 1: in "_Appel".

  Vendor/Ruby/1.9.1/Gems/actionpack-2.3.18/lib/action_controller/Dispatcher.RB:13 0: in 'block in build_middleware_stack'

  Vendor/Ruby/1.9.1/Gems/actionpack-2.3.18/lib/action_controller/string_coercion. RB: 25: in 'call '.

  Vendor/Ruby/1.9.1/Gems/actionpack-2.3.18/lib/action_controller/string_coercion. RB: 25: in 'call '.

  Vendor/Ruby/1.9.1/Gems/actionpack-2.3.18/lib/action_controller/params_parser. RB: 15: in 'call '.

  Vendor/Ruby/1.9.1/Gems/actionpack-2.3.18/lib/action_controller/session/abstract _store.rb:177: in "call".

  Vendor/Ruby/1.9.1/Gems/ActiveRecord-2.3.18/lib/active_record/query_cache. RB:29: in "block in the call.

  Vendor/Ruby/1.9.1/Gems/ActiveRecord-2.3.18/lib/active_record/connection_adapter s/abstract/query_cache.rb:34:in "cache".

  Vendor/Ruby/1.9.1/Gems/ActiveRecord-2.3.18/lib/active_record/query_cache. RB:9:i n "cache".

  Vendor/Ruby/1.9.1/Gems/ActiveRecord-2.3.18/lib/active_record/query_cache. RB:28: in "call".

  Vendor/Ruby/1.9.1/Gems/ActiveRecord-2.3.18/lib/active_record/connection_adapter s/abstract/connection_pool.rb:361:in «call»

  Vendor/Ruby/1.9.1/Gems/actionpack-2.3.18/lib/action_controller/Failsafe.RB:26:i n 'call '.

  < internal: Prelude >: 10: in 'synchronize '.

  Vendor/Ruby/1.9.1/Gems/actionpack-2.3.18/lib/action_controller/Dispatcher.RB:10 6: in 'call '.

  Vendor/Ruby/1.9.1/gems/rails-2.3.18/lib/rails/rack/static. RB:31: in 'call '.

  Vendor/Ruby/1.9.1/gems/rails-2.3.18/lib/rails/rack/log_tailer. RB:17: in 'call '.

  Vendor/Ruby/1.9.1/Gems/Thin-1.5.1/lib/Thin/Connection.RB:81:in 'block in pre_process ".

  Vendor/Ruby/1.9.1/Gems/Thin-1.5.1/lib/Thin/Connection.RB:79:in 'catch '.

  Vendor/Ruby/1.9.1/Gems/Thin-1.5.1/lib/Thin/Connection.RB:79:in "pre_process".

  Vendor/Ruby/1.9.1/Gems/Thin-1.5.1/lib/Thin/Connection.RB:54:in 'process '.

  Vendor/Ruby/1.9.1/Gems/Thin-1.5.1/lib/Thin/Connection.RB:39:in "receive_data".

  Vendor/Ruby/1.9.1/Gems/eventmachine-1.0.3/lib/eventmachine. RB:187: in 'run_machine '.

  Vendor/Ruby/1.9.1/Gems/eventmachine-1.0.3/lib/eventmachine. RB:187: in 'run '.

  Vendor/Ruby/1.9.1/Gems/Thin-1.5.1/lib/Thin/backends/base. RB:63: in 'start '.

  Vendor/Ruby/1.9.1/Gems/Thin-1.5.1/lib/Thin/Server.RB:159:in 'start '.

  Vendor/Ruby/1.9.1/Gems/Thin-1.5.1/lib/Thin/Controllers/Controller.RB:86:in 'start '.

  Vendor/Ruby/1.9.1/Gems/Thin-1.5.1/lib/Thin/Runner.RB:187:in 'run_command.

  Vendor/Ruby/1.9.1/Gems/Thin-1.5.1/lib/Thin/Runner.RB:152:in 'run '!

  end: 11: in "< main >".

  [739] [08/04/2016 18:51:55.992] I: rendered /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/public 500.html (500 internal server error)

  [740] [08/04/2016 18:51:55.998] I: treatment MagicController #do_magic (for 1.1.1.1 to the 2016-04-08 18:51:55) [POST]

  [741] [08/04/2016 18:51:56.060] I: treatment MagicController #do_magic (for 1.1.1.1 at 2016-04-08 18:51:56) [POST]

  [740] [08/04/2016 18:51:56.278] I: completed in s 280ms (view: 1, DB: 115). 200 OK [https://macserver.elcapitan.com/magic/do_magic]

  [741] [08/04/2016 18:51:56.368] I: completed in 307ms (views: 1, DB: 177). 200 OK [https://macserver.elcapitan.com/magic/do_magic]

  mpass1 kernel [0]: gfx: Surf 15ea9c9f: clientClose:

  8 April 18:52:14 macserver kernel [0]: gfx: Surf 15ea9c9f: SetIDMode: id = 330484187 mode = 0 x 24

  8 April 18:52:14 macserver kernel [0]: gfx: Surf 15ea9c9f: clientClose:

  ######################################################################

  ##############     END               ##########################################

  ######################################################################

  OS X Server: Troubleshooting with the Profile Manager

  How to reset the profile to its original State Manager

  Update Server 3.2.1 fail

• When right-clicking on a link and a window opens, I want it ask me "Open Link in New Window" first of all, not the second. This has changed in the last update.

  So I got allows you to right-click on a link and go the first option and open this link in a new window.
  I don't not like tabs, or use them.
  The latest update or version of Firefox has changed this and now
  Open the link in a new tab first, then
  Open the link in a new window.
  My question is, how can I change this back to the way it was.
  Thank you very much
  TREV

  My problem is the opposite of the OP, but the result is the same. Years of the use of previous versions of Firefox have conditioned me to open links in a new tab by selecting the second choice of right click menu without looking. After a week of trying to readjust in places reversed 'Open link in a new window' and "Open link in a new tab", I'm always unintentionally opening new windows instead of tabs every time after time. The point is, why should I have to adjust (or need a plugin external to solve your problem). YOU TEACHES ME HOW to DO THIS WAY, then why you changed it? Do you think that the reversal is most effective? A task force of new users select the new range? Do you have a taste of trial with Pepsi? Have you adopted Microsoft 'we know what you want better than you' policy? People in the drive of England on the left side of the road with the steering wheel on the right. Maybe it's actually a better way to do it. Maybe we should just rethink all cars new American model in this way and reverse all the signs from one day to the next without any warning - no ads, no choice, do it just because the engineers decided that it is better. While we're here, maybe you should adopt menu 'Ribbon' of MS then. I do sound a little angry or like if I have too much time on my hands? If so, it is because I am and I do not have enough to relearn the same tasks whenever you think of a better way to perform a basic operation. I'm sick of being 'improved' perfectly feasible programs to offers no improvement, only the need for a conversion.

• my printer has changed its policy to be very small characters and we can't read, how do I change the police?

  model printer officejet 4500 printer all in one, running windows XP

  The printer has changed its own police force.  I can't find anything to restore.  It is incredibly small and difficult to read.  I tried to restore the default values that did not work.

  OK when you open firefox go to file > Page Setup > ladder.

  Change the size of the scale and see if it makes a difference when you print.

• "Windows update default location of data has changed". " Microsoft Fix - it message. No solution is apparent.

  "Windows update default location of data has changed". " Exactly, what causes this in Windows XP? I does not change the situation. So who, or what, has changed the default location? The Op XP system is still supported, so why is there no solution? And why it still occur? ... Difficult questions, Microsoft?

  PS. What is the default location anyway?

  "Windows update default location of data has changed". " Exactly, what causes this in Windows XP? I does not change the situation. So who, or what, has changed the default location? The Op XP system is still supported, so why is there no solution? And why it still occur? ... Difficult questions, Microsoft?

  PS. What is the default location anyway?

  It is a peer-to-peer forum.  You don't talk to Microsoft.

  A quick search indicates you have probably allowed the system to become infested/infected.

  Here's what I propose - from top to down, don't skip any even if you do 30 minutes as part of an obsession, part of all that you already have.  ;-)

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  Cleaning the components of update on your Windows XP computer

  Given your current number, it's a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you will use the aggressive version if given a choice):
  How to reset the Windows Update components?

  Reset.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know usingGoogle (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 20 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/

  Those who can help you discover visually where all space is used. Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end. This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• When I try to use the Windows Update link for my XP computer I get a message indicating that the location where the Windows Update stores data has changed and it needs to be repaired. How can I solve this problem?

  When I try to use the Windows Update link for my XP computer and after using Windows Mr. Fix - It, I get a message indicating that the location where the Windows Update stores data has changed and must be repaired. How can I solve this problem?

  I'm not that computer literate and do not understand what needs to be fixed.

  This problem just started a few weeks when I noticed that I had any recent download automatic update that I regularly get. So I tried to do it manually through access via my control panel.

  I use ESET Antivirus Node32 software.

  Hello

  1. What is the error message or an exact error code?

  2 have you made changes on the computer before this problem?

  3. you try to check the updates?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Reset Windows Update components and then try to download the updates.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://support.microsoft.com/kb/322756

   

  Method 2:

  File system scan tool checker and then try to press Ctrl + Alt + Delete and check.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe):

  http://support.Microsoft.com/kb/310747

  Please respond with more information so that we could help you more.