SERVER PROXY COMMUNICATION
I need some clarification on the Proxy Server. When you configure the Web browser like IE or Firefox to use a Proxy Server for communication (for all the protocols includng HTTP/FTP/GOPHER etc) doesn't work, it uses the same port for all communications? If Yes, is it possible to limit access to the network on the proxy server? Lets say I want some users to have only web access and some FTP. Is this possible with this kind of Setup?
Thank you
All traffic between clients > proxy server on the port of the proxy server. Then the 'sources' proxy / proxies a 'new' connection with its IP address as the source and the destination. Of course, there are different types of proxy servers also anonymous, transparent etc, but it's normal behavior. But almost all proxy servers allow you to control what use that can access what protocols for example MS ISA. This can be done on the basis of the IP/name of user/Machine etc.
Concerning
Farrukh
Tags: Cisco Security
Similar Questions
-
Satellite Pro P100: Wlan with no response from the server proxy C-27
I have a laptop model Satellete Pro P100 and tries to connect to a wireless router.
I was able to connect to it over the past four months.Last week, I connected to a wired network and now he refuses to re - connect to my home wireless network. He acknowledges that I am connected but connectivity doctor says "there is no response from the server proxy (c-27).
A friend in the House is able to connect to the internet with their computer without problem.
I have tried everything I know, but need help please. Thank youHello
Have you checked in the properties of Wlan settings and the TCP/IP properties?
Please check if the options: IP automatically get an address and get server address DNS are automatically set correctly. -
Server Proxy VCB does need a dedicated Volume?
Hello
Server Proxy VCB must a LUN or a Volume dedicated to save snapshots or these snapshots are housed in the volume source VMFS iteself?
Jaikrit Negi
(VCP, BCCFP, ASFS)
Hello
To clarify - when using VCB, the first thing that is done is to create a snapshot of the virtual machine. This snapshot will be created when the virtual machine is (VMFS etc.) default.
After that (in the case of a full backup), the VCB proxy will copy the entire virtual disk (*-flat.vmdk) storage that resides on the VCB proxy server. Then a 3rd third party tool can empty these files (tape, VTL etc.).
So yes, the snapshot is created on VMFS. The virtual disk itself is temporarily stored on a drive connected to the VCB proxy (as much as you put the mount point). So don't forget your VCB proxy needs to have at least enough free disk space to facilitate your largest virtual disk to back up!
When you use a file-level mount, excessive disk space on the proxy is not necessary; then you have really a 'view' in the virtual disk.
Virtual disk writes are temporarily stored in the snapshot on VMFS file. After the VCB backup, you (or the 3rd party software backup) disassemble the medium and the snapshot is deleted. Beware, VCB has a tendency to 'forget' to remove the snapshot sometimes!
-
How can I change my settings from a server proxy to a regular server?
My parents home computer was working fine and now out of no where when you open Mozilla we receive an error message that says... Firefox is configured to use a proxy server refusing connections. Help!
Hello
You can change the Firefox proxy settings under:
- (For Windows) Tools (or
) > Options
- (For Mac and Linux) Change (or
) > Preferences
- Under the advanced > network, click on 'Settings' in the category of connection
- (For Windows) Tools (or
-
My Server Proxy of Google Chrome is not working
I recently did some research on my IP address and my proxy server after that I discovered that someone had used my IP address for illegal things.
I have Google Chrome and Microsoft 7. When my proxy server is enabled the HTTP ERROR 401 UNAUTHORIZED appears when I try to open Google Chrome. Then a pop-up appears which says ' required, authentication server http://www.google.com:80, server NETGEARWNR1000V.3 "The only way I can access the internet is in any case if I go to settings > advanced settings > network > change Proxy settings > then disable my proxy server.This causes me and my wife continued to stress because we use this computer for educational purposes, and we are a not far from our internet connection being removed completely if we are not how to solve this problem. What I understand, I just need to figure out how to get my computer to recognize my proxy server or IP address.If anyone has any advice it would be GREATLY appreciated!Hello
The 401 unauthorized error is a HTTP status code which means the page you tried to access cannot be loaded until you first log in with a valid user ID and password. If you have just logged in and received the 401 unauthorized error, it means that the credentials you entered were not valid for some reason any.
Please make sure that the credentials you enter for your router are correct.
As it works after you turn off the proxy server, it might be that the proxy address that sing you requires credentials.
1. How was your proxy settings are configured initially?
2 were the parameters provided by your Internet Service proxy provides?
3. meet you the same problem in Internet Explorer too?
You can try to reset you TCP/IP and check. Check out the link: http://support.microsoft.com/kb/299357/en-us
If the problem is only limited to Google Chrome, I suggest you to post your query in Google Chrome, the support forums at: https://support.google.com/chrome/?hl=en
Please reply with the status of the issue, so that we can better help you.
Kind regards
Deepak.
-
Server proxy with rtmpt (Very Urgent) problem
Hello
In my netwrok rtmp is not supported, so I am not able to connect rtmp.
I tried with rtmpt(ports 80,443) and able to connect and publish the live stream on FMS(using AS3).
But with in 5 to 6 minutes my proxy server blocks streaming. Reason, my proxy may allow only 600 of http request / minute from a particular computer (client machine), but still in publication via rtmpt after some time of http post asking come customer form machine increase limit of 600 / minute, for proxy is blocking the connection.
I make my connection like this "rtmpt://xx.yy.zz.kk:80 / training" where xx.yy.zz.kk represent internet IP.
Please suggest some reversal so that a message http rtmpt(http tunelling) request will not increase periodically.
Concerning
Nitesh kumar
The problem got solved by using the connection FMS using rtmps with port 443.
-
Hey guys,.
Is it possible to have a proxy on weblogic Domain in the front, a message to a proxy in weblogic Domain B? If yes how you configure proxy endpoint to answer to point to the incoming URL of the endpoint proxy B?
Thank youHello
If you want a Proxy 1(on on domain) service to connect with another Proxy Service 2 (on a different domain), the procedure is similar to any other business service configuration. In general, business would point to main service (here your back-end service is another ProxyService on a different domain).
To set up this communication, you will need to do the following:
1. create a service business (with the WSDL Proxy Service 2) and that the URL of the Proxy 2 configured for this service.
2. Service 1 Proxy track demand for this business.It's you should be able to invoke services proxy on other areas.
Please let me if you need additional information.
Thank you
Patrick -
We have a Site Web of Cold Fusion on our Windows 2000 Server we host. We have a few customers with a proxy server that should disable the cache for the Web site to allow users to connect properly. Specifically, if a customer has 2 user, they can connect with the 1 St well id and place an order then disconnect. When they connect 2nd ID they see 1 user Id, name of the customer information, order, etc...
The only way around this is if we have the customer disable the cache for the web site on their server. Then it works fine. Is there an alternative approach to a solution? Because it's heavy this relay for the it Department for them to access the site properly.
I use Session variables to control login and cart and destroying the sessions during the process of disconnecting. I also put the No.-cache pages, but this did not help. There may be a setting to the Cold Fusion administrator, I need to put on our server...
Thanks in advance for any information.
-TimOK figured it... Cfm pages have been cached on the proxy server.
I put the following code in the application.cfm.
This took care of it.
-
Server proxy and Web Services on HP Officejet Pro 8500 A910g more a
My ISP does not proxy servers. Can I use Web Services on my HP Officejet Pro A910g of 8500 has more?
Help, please!
Thank you
An update solved this problem.
-
Ability to create virtual server Proxy VCB San fiber in a Machine?
Hi all
I was wondering if it is possible to create a Virtual Machine to be a VCB Proxy to a SAN Fibre network. I see no way to emulate a fiber on the virutal machine controller then how will you proceed to do this if possible?
I don't think that this is possible - if it is the FC SAN - since you cannot load an HBA driver within the virtual machine
If a physical box would still be necessary for CF vcb backups.
-
HP Envy Notebook dv6: unable to connect to the proxy server
I saw an error message "Unable to connect to the proxy server" when I try to connect to the internet via WIFI, even if the label shows who is connected to my home router.
HR63 wrote:
Thanks for the tip, there is so much information, the laptop with this problem belongs to my daughter and because she doesn't have an internet connection (can not download anything), there is another way to fix it?
I don't know because the online is where most of the instructions are locate in. I copy and paste the links here, but unless you can print them out or print the online pages it becomes hard, but here are the parts of the txt of it. +
http://malwaretips.com/blogs/unable-to-connect-to-the-proxy-server-removal/
How to remove "Unable to connect to the proxy server" (Virus Removal Guide)
This page is a comprehensive guide, which will remove "Unable to connect to the proxy server" virus from your computer and any other adware program that may have been installed during the installation process.
Please complete all of the steps in the correct order. If you have any questions or doubts in any point, STOP and ask for our assistance.
STEP 1: restore the default proxy to your machine settings
STEP 2: remove failed to connect to the ad software proxy server from Internet Explorer, Firefox and Google Chrome with AdwCleaner
STEP 3: delete impossible to connect to the proxy server with Junkware Removal Tool browser hijacker
STEP 4: delete impossible to connect to the virus pop up server proxy with Malwarebytes Anti-Malware free
STEP 5: check a second time for the "unable to connect to the proxy server" malware with HitmanPro
(Optional) STEP 6: delete impossible to connect to the proxy server of Internet Explorer, Firefox and Google Chrome adshttp://www.geckoandfly.com/9275/Internet-connection-error-unable-to-connect-to-the-proxy-server/
It is with IE
Step 1 - launch Internet Explorer
Step 2 - Click the icon "but" it looks like a gear wheel...
Step 3 - select 'Internet Options '.
Step 4 - Select the 'connection '.
Step 5 - Click Lan settings
Step 6 - uncheck "use a proxy server for your LAN (these settings may not apply to dial-up or VPN connections)."
Step 7 - click 'Ok' to save the changes
If you are using a proxy server, check your proxy settings, or check with your network administrator to make sure that the proxy server is running. If you don't believe that you should use a proxy server. Here's a video tutorial:
Also, if you can since I don't remember which browser your help that gave you this message that I had to go with IE as a default.
-
We have a server proxy to our school and I would like to know how to set the proxy settings.
Under settings to go wireless and networks
under Wi - Fi networks
Press and hold the connection that you want to change
Select 'change network '.
Scroll profile
Change the automatic to manual Proxy settings
Enter your settings
In this place you can also change your DHCP server static IP address
-
Proxy Server is not responding
First, note that I'm not the best to find answers to my questions. I've read some things about the message in Internet Explorer, while on the internet on the Server Proxy does not, but I am a little leary to do what he says. There are two users on our computer. My connection is fine. I can access anything that it is online. When my husband tries to access the websites except his email, it gets the error message. I also ran a diagnostic program that says "the remote device or resource won't accept the connection." I don't know what to do with it. Can someone help me in layman's terms how to solve the problem so that it can access the internet like it used to? Thanks a lot for a solution.
Hello Jasmine4,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.
I understand your husband is having problems of access to the Internet, but on the same computer, you are not. I encourage you to post what operating system you are using. And if your 32-bit OS or 64 bits as with what we can provide you with accurate information.
Operating system Windows am I running?
Is the Version of Windows on my computer 32-bit or 64-bit?
Will you please re-post with the information requested and I would be happy to provide assistance. Thanks for posting on the HP Forums. Have a great day!
-
DMS 5.2 proxy server?
I have my DMS running in a network that sails through a Server Proxy, is it possible to set it up in the DMM and SnS I saw the option in the DMP, but not in the servers.
I need so that I can publish web pages and RSS.
Thank you!
The SnS & DMM cannot be configured to use the Proxy.
It is a known problem.
Check:
----------
CSCte67952 - DMD: RSS does not work after upgrade to 5.2
Symptom:
--------
The RSS ticker doesn't show content after upgrade to 5.2.
That's because DMD in version 5.2 uses Flash to display the RSS ticker
And the Flash 9 and 10 players built in security to not allow content
Another area.
This security feature blocks content.
Workaround solution:
-----------
There are several options available:
1: only use the RSS feeds from sites that allow cross site scripting.
2: use a line of service "Yahoo Pipes" that acts as a proxy. This
will result in a new URL which can be used in the DMD, bypassing
a cross-site scripting.
Additional note:
----------------
If you use the RSS feed in the design of the standard display tool, it will work
with any RSS feed you and you don't need a cross-domain policy file.
Cross domain speaks only of Adobe Flash Player and the ability to read
content from other areas. Its a security problem
For example:
If your SWF file is hosted on www.cisco.com/flash/myflash.swf
And this SWF to read any content (xml, rss, etc.) of rss.cisco.com/myrss/xml
Who is allowed. If this SWF file attempts to access data on www.google.com/somedata.x
ml, which would require a crossdomain.xml to cisco.com/crossdomain.xml who
lists of google.com, it allows the Flash Player to access the content at google.com
http://kb2.Adobe.com/CPS/142/tn_14213.html#policy
If this answers your question, take the time to mark this
discussion answered & rate the answer.
Thank you!
T.
-
Cannot download book. Get the following message. "Error getting license server communication MW_ADEPT_CORE_EXPIRED problem" I have no confidence in this type of communication because I never received answers from the forums / wish you could afford to live person
I select a book to read in my library, it takes me to digital editions and this message appears. Worked for a few years, but something's happened, maybe I did but don't have and making matters worse there is no contact to fix it. Get the following message. "Error getting license server MW_ADEPT_CORE_EXPIRED communication problem" I have
Maybe you are looking for
-
How can I convert a Document attachment in a link I can Tweet
I would also like to post a link to the document in a forum like this - accessible on the internet (but not this one) The Document, to which I am referring opens on my computer in the Microsoft Word program. I hope I expressed myself clearly - I go b
-
I use privacy choice Tracker 2.2 block
-
The platform takes supported Print Studio Pro?
I run Photoshop 11 and 12 of Photoshop CS-6. (On my computer), I said that I don't have the proper support for Print Studio Pro. What is the shoring? Chris
-
I use Win 7 64 and recently all my files have begun to show read-only. Other responses on this forum, which suggests to change the read-only via the Properties dialog box, attrib command did not work. In addition, I created a new administrator accoun
-
Account icon Email blackBerry Smartphones won't go away
I have three e-mail accounts set up on my 8330. I use is no longer one of them, so I deleted using the e-mail account on the device configuration application, as well as to go online to my BlackBerry Sprint account and delete it. The icon always ap