ServerName.out exclusively locked Server 2008, Weblogic 12.1.3

Similar Questions

• Enable 3D Support box grayed out for Windows Server 2008 R2 vm, not for the Windows 7 virtual machine

  Hello

  IM wondering why the 3D feature is not available when I select Windows Server 2008 R2 as a type vm.

  For testing purposes, I have created a machine virtual 64-bit Windows 7 and the 3D box is not grayed out.

  I wonder why this is the case?

  Welcome to the community,

  3D support are not available for all guest operating systems. Please press the 'Help' button to find out what OS comments are supported.

  André

• All accounts locked out on windows server 2008 r2.

  

  I am on windows 2008 r2 on a virtual machine, in a field with a machine virtual windows 7. It is hosted on my computer windows 7.

  I had the configuration of the field very well, everything was functional with network etc, I changed that would connect the server machine locally in assignment policies user right. I was aware that I had everything works fine, but when I came back after an hour or so, I tried to connect it to my account has full administrator rights and I get this message, "you can not connect because the logon method, you use is not allowed on this computer. See your network administrator for more information. »

  I thought I added something like only a certain group of users can connect and none of my accounts are in this group of users.

  I think I'd be able to solve the problem if I could connect to access account policies, but I can't in my machine at all.

  Any ideas? Thank you

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• I can't perform a backup due to a State of "Out of resources" NTDS writer. Works with Windows Server 2008 R2. Do not know how to proceed.

  Hello

  I'm trying to backup of a domain controller with the syncsort backup software. Currently when I try to run a backup job job errors. I worked with the support of syncsort and have located the question to be a vss of NTDS writer. After the reboot the box, everything seems fine but if I try to run a task, that the particular author (NTDS) States that it is "out of resources." I'm not sure whats causing this or how to check. Any help would be thank you very much!

  pwarren.

  Hello

  I suggest you to ask your question in the TechNet Windows Server 2008 R2 support forum: http://technet.microsoft.com/en-us/windowsserver/bb310558

  Thank you.

• required WebLogic 10.3.5 instllable for windows server 2008(64bit)

  Hello
  
  I tried to find the server (10.3.5) weblogic, CO (13.4), BO (13.4) and POS (13.4) installable for Windows server 2008(64bit) but I am unable to find in electronic delivery or anywhere elsewhere on the Oracle's Web site.
  
  Can someone please give me the link for downloading the software.
  
  Thank you.

  Hello
  On this link below, search for older versions of Weblogic Server that is located at the bottom of the page. Expand WLS 10.3.5. You have need Weblogic Server + Installer package consistency. Download setup generic jar.

  http://www.Oracle.com/technetwork/middleware/WebLogic/downloads/WLS-main-097127.html

  Below, this post for more details:
  Re: Why so hard to find WebLogic Server 10.xx for Windows 7 64-bit?

  Thank you
  Ravi Jegga

• WebLogic STUCK Thread on query on MS SQL Server 2008

  Hi all
  
  I am the thread stuck following during an update of database on MS SQL Server 2008. Works fine on Oracle.
  Tried latest MS SQL Drivers and also tried datadirect drivers... any suggestions are welcome.
  
  
  at java.net.SocketInputStream.socketRead0 (Native Method)
  at java.net.SocketInputStream.read(SocketInputStream.java:129)
  at com.microsoft.sqlserver.jdbc.TDSChannel.read(IOBuffer.java:1579)
  at com.microsoft.sqlserver.jdbc.TDSReader.readPacket(IOBuffer.java:3730)
  -locked (a com.microsoft.sqlserver.jdbc.TDSReader) < 0x03a500e0 >
  at com.microsoft.sqlserver.jdbc.TDSCommand.startResponse(IOBuffer.java:5321)
  at com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement.doExecutePreparedStatement(SQLServerPreparedStatement.java:388)
  to com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement$ PrepStmtExecCmd.doExecute (SQLServerPreparedStatement.java:340)
  at com.microsoft.sqlserver.jdbc.TDSCommand.execute(IOBuffer.java:4874)
  at com.microsoft.sqlserver.jdbc.SQLServerConnection.executeCommand(SQLServerConnection.java:1400)
  -locked < 0x087ab808 > (a java.lang.Object)
  at com.microsoft.sqlserver.jdbc.SQLServerStatement.executeCommand(SQLServerStatement.java:179)
  at com.microsoft.sqlserver.jdbc.SQLServerStatement.executeStatement(SQLServerStatement.java:154)
  at com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement.executeQuery(SQLServerPreparedStatement.java:283)
  
  Thank you
  Faisal

  There used to be a way to set the isolation level by default for connections from the pool, but I do not see in the console...
  Your application can set it when he gets the connection, but you know what you are doing? Do you know
  Why you blocked, and who could hold the locks you want for as long?

  I found it... Add to the list of properties of the driver of the pool:

  desiredtxisolevel = TRANSACTION_READ_UNCOMMITTED

  or TRANSACTION_READ_COMMITTED, TRANSACTION_REPEATABLE_READ,
  TRANSACTION_SERIALIZABLE, etc.

• installation of Weblogic Server 10.3.2 on Windows Server 2008 R2 x 64 64-bit?

  Hello
  
  I am trying to install the 64-bit version of Weblogic Server 10.3.2 on my Windows Server 2008 R2 SP2 64-bit operating system.
  
  First of all, I downloaded "jdk-6u24-windows - x 64 .exe" and installed on my 64-bit platform.
  
  I downloaded "wls1032_generic.jar" and try to install it by the command below
  
  "java-d64-jar wls1032_generic.jar".
  
  However, I received the message below
  
  Unrecognized option:-d64
  Could not create the Java virtual machine
  
  All options on this problem. Where am I wrong?

  Hello

  You must ensure that the following things:

  (1) If you want to run your WLS on L 64-bit mode, then you must use the generic installer Jar example: * "java-jar wls1032_generic.jar" *.

  (2) the pot above must be installed using only a 64-Bit JVM so that all libraries in 64-bit will be available with the WebLogic when installing it. Then first download a 64-bit JVM Woindows Inbox.

  Then simply run the following command to check if the JVM is 6 t 4 little or not:
  Set JAVA=HOME=C:\My64BitJDK\jdk1.6.0_21

  * $JAVA_HOME\bin\java-version *.

  (3) you can now start your setup of WebLogic as follows:
  * $JAVA_HOME\bin\java-jar wls1032_generic.jar*

• Is there a version of Windows server 2008 r2 32 bit out?

  Hello is windows server 2008 r2 32 bit realsed or in use

  Ever heard of Google?

  Support is located in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Unable to validate a way out of trust on either of the two domains using Windows Server 2008 R2

  I have two domain controllers in the two different forests.  Both have a Stub dns setup for each other and can ping both the field and the name of dc for eachother.  Domain1 build outgoing approval and validate successfully.  Domain2 see confidence applied, however any attempt to validate this trust or build from the Wizard ends with only 2 domain cannot locate the domain controller for Domain1.  What can be done to allow Domain2 validate this trust?

  Hello

  Microsoft has specific Forums to help you with your Server 2008 R2 questions.

  Could you please repost this link in Server 2008 R2 Forums.

  "Support for Windows Server 2008 R2"

  http://TechNet.Microsoft.com/en-us/WindowsServer/bb512923

  See you soon.

• Compaq Presario CQ1 1000: network drivers for Compaq Presario CQ1-1020 all-in-One desktop PC running Windows Server 2008

  Hello. I am trying to create an area of origin. I know I have to use more computers in the domain, but this is not the point. I was wondering if someone could help me find a driver for Server 2008 network for my computer (or someone could build one but I heard that takes a lot of effort). The original network driver has become unknown when I installed the operating system. I am also aware that I should use a newer computer for this but I can't afford to buy one now and I can't seem too creating a on a virtual machine. Also, I searched all over the internet and there are drivers for my computer, but not for the operating system I. Any help would be greatly appreciated. Thank you!
  
  P.S - computer is in the subject if you have not already guessed.

  Hello:

  It is possible that the file have not checked out pilots in their folder.

  To do this and then try to manually install the driver.

  Download and install this free utility for files.

  1 file listed is for 32 bit.

  http://www.7-zip.org/

  After you download and install 7 - zip, download and register but do not sp46403 run.

  Right-click on sp46403 and select 7 - Zip from the list of items.

  Have 7-Zip extract of: and leave it to decompress the file in the sp46403 folder.

  Then try to manually install the drivers, but navigate to location 7-zip extracts the sp46403 driver file to.

• HP Pavilion p7-1451 USB 3.0 and Bluetooth drivers for Windows Server 2008 R2

  I bought a HP Pavilion p7-1451 so I might have a machine that is affordable, yet powerful enough to put a server software development environment on (I'm a software engineer).

  It came with Windows 8, but I need Windows Server 2008 R2, I own through an MSDN subscription.  I did what I always do in these cases, re-partioned the hard drive, re-formatted and installed the new operating system.

  I have almost all devices work fine, but it still does not recognize the USB 3.0 ports and Bluetooth device.  I looked everywhere but could not find something that works.  Whatever it either from the HP site is targeted for Windows 7 or 8 and trying one of those, it tells me "your system does not meet the requirements of the operating system" and MSI publishes all the drivers for this particular motherboard (that I can find anyway).

  Motherboard: MSI MS-7778, also known under the name of: MSI 2AEO version 1.0

  BIOS: FRIEND 8.12

  Here is the list of "other devices" in Device Manager that Windows does not recognize:

  BCM20702A0

  (USB) Universal Serial Bus controller

  (USB) Universal Serial Bus controller

  Bluetooth device ID: USB\VID_0A5C & PID_21F1 & REV_0012

  USB Controller device ID: PCI\VEN_1022 & DEV_7812 & SUBSYS_2AE0103C & REV_03

  Windows doesn't always recognize them after allowing him to look on the internet.

  I googled everywhere and I'm not getting anywhere.

  Does anyone have advice?

  Any chance that this could be linked to the BIOS?

  I'm not having any chance to find a BIOS download for this motherboard either.

  Any help is very appreciated!

  Find out!

  Use your expertise in software engineering to mod the driver for USB 3.0 to work...

  Look at the last post on the thread. You need to mod the text file... replace NTamd64.6.1.1 with NTamd64.6.1

  http://forums.AMD.com/game/messageview.cfm?CATID=454 & ThreadID = 163739

• Windows Server 2008 R2 - need to reinstall the server

  Can I download windows Server 2008 R2 from Microsoft and install on my server and use the product key on the sticker, this is the case? I don't have the original factory OEM disc to restore the server.

  It is a Dell server and Dell said they won't hel SMEs because it is out of warranty and to ask for an extended warranty

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Services Terminal Server Windows Server 2008 R2 improved Configuration Error IE

  We have a Windows Server 2008 R2 with enhanced IE configuration set to off for all users on the Server Terminal Server services only.  The sessions of the Terminal services Server running Windows XP.  Whenever an end user clicks on Microsoft Outlook in a session, it executes an error from IE Configuration improved mentioning that the site needs to be added to the zone of confidence (subject: internet.)  Unfortunately, I do not know what url he speaks out.  I would like to know what precisely needs to be disabled in order to avoid the mistake of filling.  We have already defined group policy to disable this, but apparently not take after or gpupdate/force runs a logoff of connection occurred.  Of alternatives that anyone can give would be great.  Thank you very much.

  Nick

  This issue is beyond the scope of this site which is for the consumer to related issues.
  To ensure that you get a proper answer, ask either on the Technet site, if it is a type of Pro problem, or MSDN if it's related to the developer
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Server 2008 R2 to Server R2 2012

  Hello

  I need to upgrade our server running R2 R2 2008 to 2012.  Our current Server 2008 is the DC and active directory.  I find a lot of articles speaking to join in 2012 to a field and then making the DC, but not much on how to upgrade the actual server.  I would like to be able to do this without having to rebuild the AD.

  Any suggestions out there of experts?

  Thank you

  Brandon

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home
  http://social.msdn.Microsoft.com/forums/en-us/home

• Print spooler snaps p Server 2008 r2 SP1

  I have a client that is running Windows server 2008 R2. They have problems with the print spooler. He locks up almost daily, and the spooler must be restarted to get the printer to work. We have created a new administrator account, which seems to have held for some time. We tried all the stuff on Google and nothing seems to help. What else is there to watch and try?

  I have a client that is running Windows server 2008 R2. They have problems with the print spooler. He locks up almost daily, and the spooler must be restarted to get the printer to work. We have created a new administrator account, which seems to have held for some time. We tried all the stuff on Google and nothing seems to help. What else is there to watch and try?

  much better if you can repost this sub forum windows server
  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home
  his dedicated servers