service groups of access policies

Similar Questions

• The sub-groups and access policies

  It seems that when I add a user to a subgroup, the access policies of the parent that user Group does not occur. However, the user is added to the parent company of the Group of users
  Can someone please verify this?
  
  Thank you

  Subgroups does not inherit the access policy of SuperGroup in IOM [ID 815373.1]

  Bug 5985475 :

  Define an event handler after insertion and attach it to Manager data access policies as an object so that when a group is assigned to an access policy, it checks and add its subgroups to the access policy (just the first level as it will recursively the same it keeps adding subgroups). Verify that you have the same event handler attached to the event after removal of the access policy, so that to delete the access of a group policy, all subgroups are also dismissed by the access policy

  Good luck!

• Belong to several access policies

  Hello

  I am curious about all other experience with strategies of access maintained by groups and users belonging to several groups and several access policies. Example:

  John Doe belongs to group 1 and group 2

  Order
  1	AccessPolicyA
  	Selected groups: group1
  	Blocks access to the URL xyz.com
  2	AccessPolicyB
  	Selected group: group2
  	Allows access to the URL xyz.com

  The WSA will check all access DOE policies authenticates on? Or he stops and use the first access policy that it can access, in this example AccessPolicyA?

  Hi khadim,.

  WSA uses the concept of up and down to assess access policies so if political access strategy A B and B belongs to the same policy, identities and access, has listed above then WSA will use political access to assess the application.

  Best regards

  Alessandro

• ACS 5.2 places of NDG appearing is not in the access policies

  When I add placements under groups of network devices and try again and use them in my access policies that they appear. It just says no: "no data to display. If I try recreate them I get an error "" object that you are trying to create already exists. "." but it is empty. I can run an export and they appear in the CSV file, but they appear not anywhere on the GUI. I deleted the file and re-created with the same result.

  I have searched everywhere for those who have a similar situation but are empty. Any thougts?

  Kind regards

  Andy

  I have memories on the two issues with this:

  If ' there are multiple attributes with the same name as the NDG. For example if you create a user called "Locations" attribute, it can cause problems. Can be resolved by renaming the attribute

  -Can be questions if the word 'system' appears in the name of node NDG

  Not 100% sure for these (disclaimer) but I wanted to mention in the case where he gives some advice

• Issue OIm 11 g access policies

  Hi all
  
  We have defined the role of 'CommonUsers' and assigned access policies involving the announcement service and Exchange resources. We use the reconciliation of flat file to create users in the IOM, when ever his ends, there is a custom adapter assigns the role of 'CommonUsers', based on certain conditions.
  
  His works well for all new employees, IOM role 'CommonUsers' is the allocation to users and put in service in AD and Exchange.
  
  After the end of the user, the user would be in IOM with the "Disabled" status, AD/Exchange resources such as "Revoked" State (no advertising / Ex accounts) and with the release of the assigned role 'commonUsers '.
  
  Then, his does not work as expected for the status of the user of the IOM incident, REHIRE becomes 'Active' with the 'CommonUsers' role, but the AD and Exchnage resources are not getting put into service. Here, "commonUsers" is up to the user, but the connected/provisioing of role is not started.
  
  
  Please suggest me.
  
  Thank you.

  Grand,
  Please mark this thread as answered.
  :)
  Thank you
  Diallo

• IOM 9.1.0.2 - question of access policies

  Hi gurus,
  
  I have a strange behaviour in the characteristics of access policies.
  
  When users are inactivated in the IOM, they should be removed groups linked to the AP, but groups are still involved and because the AP is triggered again provisioning of resources to users.
  
  A person faces the question?
  
  Brgds,
  Carlos

  You must add to your group membership rules active status.

  -Kevin

• Can I make my Vonage phone service and always access the internet through MSN Premium

  Can I make my Vonage phone service and always access the internet through MSN Premium

  Hello

  The question you posted would be better suited to the MSN support. I suggest you to contact MSN support for assistance.

  How to contact MSN customer service
  http://support.Microsoft.com/kb/940784
  https://support.MSN.com/contactus.aspx?scrx=1
  http://answers.MSN.com/forums.aspx?ProductID=29

• Pre-population of attribute in the access policies

  Hello

  I have set up users of the IOM to AD based on access policies.

  "In the access policy I have to define the ' name of the Organization" which the usere were created in AD.

  Is it possible to generate the ' generic name organization is based on the attributes of user?

  If so, how?

  Do not put a value in the access policy.  You must generate be it in a Preopopulate plugin on the side of the application, or in your adapter on the process shape to prepopulate.  Through the user key or any other value, make your logic and return the value of key-code of the search for your organization.

  -Kevin

• User ID no is not prepopulated in our instance form so that access policies

  Hello

  I have an interesting question. I integrate our custom with connector ICF application. I created all the metadata and two pre-populate adapters too. When I create an account manually (requires account) and I send you an empty form pre-populate those adapters work as I expected and filling the user ID and password.

  Also, I created a role and access policy. But when access policies are evaluated and the account must be created, pre-filled is the password and ID no.

  Please, you have an idea what is the problem? How can I solve this problem?

  Thank you

  Milan

  Check the automatic backup and the pop before auto is checked in the process definition

  http://docs.Oracle.com/CD/E21764_01/doc.1111/e14309/promgt.htm

  ~ J

• Problem with access policies (create several resources)

  I'm having a problem with access policies:
  
  The first policy must create a resource.
  And the following policies should create childs on the resource.
  
  The problem here is that when the policies will add the childs, the resource is not configured yet.
  And then each will create a resource but I want just a single resource of the childs.
  
  
  When the resource is already deployed, policies to update this resource correctly.
  
  How can I fix?
  
  TKS

  Ricardo,

  I had a similar problem. In a post processing Manager, I managed the membership of the user to specific through the removeMemberUser roles and the addMemberUser of the tcGroupOperationsIntf class.
  The last parameter of this method is a Boolean value that, if true, would automatically trigger access by programming strategies in post processing.
  The problem is that there also is an OOTB handler for triggering access rules, so I was basically triggering twice access policies and duplicate resources appear.

  I hope this helps.

  See you soon

• I can't connect to my account administrator error: customer service group policy has no logon. access denied

  Original title: i cannot connect to my administrator account

  Hello

  When I try to connect to the administrator account I have this message "group tht the login failure policy customer service. Access denied"what can I do pls

  Hello

  (1) remember you to make changes prior to this problem?

  (2) work on a domain network?

  Step 1: Start the computer in safe mode. To do this, follow the steps below:

  Access Advanced Startup menu options by turning on your computer and pressing the button F8 continuously until Windows starts. In the advanced startup options select Safe Mode

  Startup options (including safe mode)

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  
  Step 2: check with a different user profile

  If you do not have a different user account, you will need to create a (see link below).  If everything works fine with a different user profile, you can infer that the user profile is damaged, click on the link to find out how to solve this problem.

  Create-a-user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• Customer service group policy has no login (access denied)

  I had Windows 7 dell Inspiron 1018 and I thought it would be a good idea to go to 10 Windows but it was slow and I could not do things so I decided to reverte to Windows 7, which began the problem.

  He returned but not all I get is (the Customer Service of group policy does not logon and access is denied.

  I can get it to work again or have I lost all my work and another bit, or should I just buy a new machine and break the hard drive on my little machine

  Any help please

  RJB

  Thank you it worked and I'm back to normal, until the next time. I could buy a Windows 10 for Christmas a gift for me

  Thanks again

  RJB

• Restrict a user/group to allow access only to specific shared services groups

  Hello team,

  I have EMP 11.1.2.2. I created different groups) a ' Admin_groupA') b ' App_groupA' c) "App_groupB" under the native directory. I have configured Shared services-> administrator to this 'AdmingroupA '. Those who belong to this group "AdmingroupA" is able to add a new user to the directory of companies to provide access to the group 'App_groupA '. But I don't want the users of 'Admin_groupA' to access 'App_groupB '.

  Since I put in service Shared services administrator privelge to this group of "AdmingroupA", "AdmingroupA" users are able to access "App_groupB" also. Can you please let me know how I can limit 'AdmingroupA' to provide access to users to the group "App_groupA".

  Thank you for your valuable contributions.

  You said, as you have configured administrator privileges of shared services to this 'AdmingroupA '. I don't think that you can restrict the user from this group to provide access to other users.

  ...

  Did you hear about delegate user management? Managing Director can view and manage only those users and groups which they are responsible. Good read on the your hss version Administrator's guide and see if it helps!

  See you soon

  BP

• Task service unable to access LDAP groups

  Hi all
  
  We have configured custom LDAP for user authentication.
  
  Using the identityService task list
  
  http://host/int integration, services, IdentityService, identity
  
  
  I'm trying to find the group using lookupGroup operation, he said that groups is not available in the Kingdom.
  
  At the same time, I was able to search users. LDAP integration works. It dosent work just for the looking for group.
  
  Is this something that escapes me in the configuration.
  
  Someone had a problem, if yes please provide some guidance. Its really urgent.
  
  Thank you
  Rigault.

  Looks like Splendido have properly configured the LDAP protocol, obviously, I can't comment on the custom LDAP, you have developed, but what you do in the is_config.xml ensure the correct connection string / field. This works for users, so what I think you need to do is make sure the groups that the users belong also exist under this connection string / field.

  ensure that you have followed all the tasks in this note.

  http://download-West.Oracle.com/docs/CD/B31017_01/integrate.1013/b28982/plugin.htm

  see you soon
  James

• install the Telnet Service for remote access

  How do we install the telnet service on my pc I can access the pc from anywhere under the same gateway.

  Reach

  beginning

  Run

  Type "services.msc".

  find and start the telnet service, and set the startup type to automatic

  Now you set any password for your administrator account?

  If not now

  go to my computer > right click > manage

  find user and group > select Administrator > right click > set password

  now go into firewall of network properties, made setting a right click on the network adapter Firewall setting and allow the exception to add 23 like telnet port name

  and you're done

  Restart your system

  Hope this work

  Best regards and good luck

  Sohail Khan