install the Telnet Service for remote access

Similar Questions

• Scope of the wireless connection for remote access to TimeCapsule

  I use my TimeCapsule as long wireless rather than "create a wireless network, as my ISP does not allow for the time capsule to use as my router.

  I post this question because I would like to access my TimeCapsule remotely and the hard drive connected to it.

  Now I'm Back to Mac enabled on TimeCapsule and what I believe is the appropriate port forwarded port to allow a connection outbound to it, but cannot be accessed remotely to the TimeCapsule. Any ideas?

  

  

  

  

  

  Two problems here:

  (1) the "extend a wireless network" is a defining Apple owner who is only used if the Capsule is wireless extension of the network from another router from Apple. It is not compatible with the wireless to a 3rd party router.

  This parameter must be "create a wireless network" using the same wireless network name and the password of the wireless network FIOS with time Capsule of the FIOS router by a permanent connection, cable connection through an Ethernet cable.

  (2) the time Capsule is configured to act as a router, when it should be configured to act as a "bridge"... Since you already have a FIOS router 'upstream' on the network. If the Capsule is configured as another router on the network, which creates an error Double NAT on the network, and it is unlikely that Back to My Mac would function at all in this type of installation. The setting for the time Capsule router Mode must therefore "Off (Bridge Mode).

  Since the Capsule must be in Bridge Mode to work properly with the FIOS router, it's the FIOS router that must be set up for Port Forwarding. Then, in Bridge Mode time Capsule will cross the FIOS router to your network equipment settings.

• Try to install the fax service and asking for xp sp3 cd, but I do not have it.

  I upgraded my computer to XP SP3 on the internet and now I am trying to install the fax service, but it must be the SP3 files. How to get these files.

  Hello

  1. could you give us the exact error message?
  2. where did you downloaded service pack 3?

  You must have the Windows XP installation disc to install the fax service. See the article below for more information.
  How to enable and configure the fax service in Windows XP
  http://support.Microsoft.com/kb/306550

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Install the windows service could not be accessed. message when installing printer

  Separated from this thread.

  I try to get to download my printer software and everything that appears is;

  Install the windows service could not be accessed.

  This can happen if windows install is not properly installed.

  Contact your support team.

  I don't understand what it tells me. If anyone can help?

  Hello, Ruth.

  What version of Windows are you using?  Windows Vista, 7, 8/8.1?

  Printer is PhotoSmart printer?

  Try the steps listed in this Document that follows.

  Error "Could access the Windows Installer Service" when you try to install a program in Windows 7 or Windows Vista

  https://support.Microsoft.com/en-us/KB/2642495

• AnyConnect 3.0 supports IPSec VPN for remote access?

  Hello world

  I've read about Cisco AnyConnect 3.0 issues that it supports IPSec VPN for remote access:

  http://www.Cisco.com/en/us/prod/collateral/vpndevc/ps6032/ps6094/ps6120/qa_c67-622477_ns1049_Networking_Solutions_Q_and_A.html

  I downloaded and installed the Client AnyConnect Secure Mobility Client 3.0.0629, but I'm not able to get the IPSec VPN works. Also, it has no option to use the previous of Cisco IPSec VPN client PCF files.

  Can someone point me in the right direction to get IPSec VPN AnyConnect 3.0 work?

  Thank you in advance!

  Hello

  Takes AnyConnect support IPSEC from version 3.0, but only in combination with IKEv2.

  There is no option to use a CPF file with it and the config should be pushed through a profile Anyconnect.

  More information on this:

  http://www.Cisco.com/en/us/docs/security/vpn_client/AnyConnect/anyconnect30/Administration/Guide/ac02asaconfig.html#wp1325361

  You should also change the ASA config so that it accepts negotiations IKE v2:

  http://www.Cisco.com/en/us/docs/security/ASA/asa84/configuration/guide/vpn_ike.html#wp1144572

  Kind regards

  Nicolas

• install the java plugin without internet access

  I need to install the java plugin for java 1.7.55 on a criterion which is net have access to internet. Where can I download the plugin and how I install it on a stand alone machine?
  Thank you...

  It was him... Thank you...

• To install the device driver required to access your hard drive, insert the installation media containing the driver files, then click OK."

  I'm trying to move from xp to windows 7. I spent all the requirement but she says to install the device driver required to access your hard drive, insert the installation media containing the driver files and then click OK. "what should I do? Where can I find the driver?

  Guess he would seek software/drivers for the chipset MB

  & sata/IDE controller software. Get the MB hardware specifications, go to the mfg

  Web site & download the software and drivers. If intel, download the chipset installation

  utility & install it 1. The other would be the SATA or / and drivers for the MB IDE

  controllers, 'Matrix Storage console' would be the one, also chk for desktop

  Internet downloads, amd, and other brand materials would be substantially the same.

• Cannot uninstall the Client Services for Netware on Win XP sp3.

  Try to restore the screen of welcome on Windows XP sp3. Not connected to the server netware in any way. Client for Netware only qualified auto service and only option is to start. When trying to start the service says that the system cannot find the specified file. Client for Netware is NOT listed under properties of the connection to the Local network either, so it is impossible to uninstall this way. Any suggestions?

  might be interesting to try the following, go to control panel, click internet connections, your internet connection make a right-click, and then click the Properties tab, it should open this connection uses the following items box.

  If you see no client services for netware in this box, lock underneath you should see two tabs (installation) and (uninstall)

  the trick is to reinstall it first and then uninstall it later.    Click the install it should open another box box should be the client services for netware and Songbird for microsoft, highlight the client service for netware, and then click on install let the computer install it and restart the computer, then go back in to the Control Panel on the internet, and click connections right properties, once the box opens again it should now have the client service for netware inside now just uninstall highlight and click on uninstall, let the computer uninstall, then restart your computer again, click on Control Panel and use click on modify use way connect you now the home screen should be on.

• Cannot install the Lenovo Service bridge

  Hello

  Try to install the Lenovo Service bridge app, the installer downloads the application but then returns an error message saying "cannot retrieve application. Authentication failure. "and ends with me.

  See you soon,.

  Callum

  EDIT: Here is the 'details' that's for me - http://pastebin.com/AKsMpvg3

  Lenovo is aware of the problem and is working with several security companies to have Lenovo Service bridge (LSB.exe) added to the white lists.

  UPDATE - a point of support was released to explain this.  An updated version of the LSB is to be released today 23/06/15

  Thank you

• Windows 7 Enterprise N - cannot install the Media feature for 64 - bit Pack

  I tried to install the package of multimedia features for Windows 7 N, but it keeps saying that it is not applicable to your computer.  Why?  I search high and low and cannot find an answer.  I tried to download windows media player, but I can't find a version for Windows 7.  More something what I don't have IIS 7.0.  Whatever it may be.

  Can anyone provide steps to help me install the 7 business N Windows Media feature pack?  Service Pack 1 is already installed and updates are all up to date.

  Download x 86 Edition-> Windows6. 1 - KB968211 - x 86 - RefreshPkg.msu
  Download x 64 Edition-> Windows6. 1 - KB968211 - x 64 - RefreshPkg.msu

  Make sure you try to download and install the version appropriate for your operating system.

• ASA 5510 VPN for remote access clients are asked to authenticate on box

  Don't know what's the matter, but my remote access users are invited to join the ASA before connecting to the tunnel. How can I disable this? Config is attached. Thank you all -

  For remote access connections, you can turn off the prompt xauth (user/pass) with the following:

  Tunnel ipsec-attributes group

  ISAKMP ikev1-user authentication no

  -heather

• How to use ACS 5.2 to create a static ip address user for remote access VPN

  Hi all

  I have the problem. Please help me.

  Initially, I use ACS 4.2 to create the static ip address for VPN remote access user, it's easy, configuration simply to the user defined > address assignment IP Client > assign the static IP address, but when I use ACS 5.2 I don't ' t know how to do.

  I'm trying to add the IPv4 address attribute to the user to read "how to use 5.2 ACS", it says this:

  1Ajouter step to attribute a static IP address to the user attribute dictionary internal:

  Step 2select System Administration > Configuration > dictionaries > identity > internal users.

  Step 3click create.

  Static IP attribute by step 4Ajouter.

  5selectionnez users and identity of the stage stores > internal identity stores > users.

  6Click step create.

  Step 7Edit static IP attribute of the user.

  I just did, but this isn't a job. When I use EasyVPN client to connect to ASA 5520, user could the success of authentication but will not get the static IP I set up on internal users, so the tunnel put in place failed. I'm trying to configure a pool of IP on ASA for ACS users get the IP and customer EasyVPN allows you to connect with ASA, everything is OK, the user authenticates successed.but when I kill IP pool coufigurations and use the "add a static IP address to the user 'configurations, EzVPN are omitted.

  so, what should I do, if anyboby knows how to use ACS 5.2 to create a user for ip address static for remote access VPN, to say please.

  Wait for you answer, no question right or not, please answer, thank you.

  There are a few extra steps to ensure that the static address defined for the user is returned in the Access-Accept. See the instuctions in the two slides attached

• I'm unable to install the printer driver for HP OfficeJet G55xi

  I am trying to install the printer driver for HP OfficeJet G55xi.

  When I went to the HP site, it said to install Windows 7 operating system printer driver, by plugging the printer on my Windows 7 computer using a USB cable.  I did, but it was not installed.

  I also need to install the HP Director software.

  I had a computer technician to connect remotely to my computer to install the printer.  He had to install additional tools that are available on the same site where I tried to install the printer driver.  I don't know how he did, but I watched it.  Anyway, he managed to install additional tools, which resulted in the printer being installed correctly.

  It's a pity that the site where I download the printer driver does not provide adequate instructions for how to do this.  I guess the solution is hiring a computer technician to do it for you.

• Satellite M60: cannot install the latest driver for my graphics card

  Can not install the latest driver for my graphics card
  Satellite M60
  GRAPHICS ATI MOBILITY RADEON X 700

  Hello

  First of all I'm really putting t understand why you start two topics with the same theme. It is often better to have a subject with good content and interesting comments. Am I wrong? ;)

  Anyway, in your case, it is interesting that Toshiba use adapted drivers because of the material. This means that this graphics card is not required to run at the maximum level. Material cooling in laptops is very problematic and high temperature can cause overheating or a material damage. All hardware components are placed on a small square. Graphics card produces a lot of heat and it is not so good for other material.

  When you use graphic driver non-Toshiba card is forced to run faster. That's any use of support laptop manufacturers don t of third party drivers. The fact is that physical protection is a priority.

  I didn t do all the experiments, but according to some reports on this forum, there is how to install the driver of non-Toshiba graphics card.

  Please check this forum and you can find a lot of comments about this. An interesting topic is http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=18063&messageID=66186

• Impossible to install the latest driver for Intel 82852/82855 GM/GME (SP A40)

  I know that this topic is explained before by NickyNoogle and Juan28, however I need more help.
  I can't install the latest driver for the graphics controller Intel 82852/82855 GM/GME (Toshiba A40 Satellite Pro). I downloaded the driver from the Intel Web site, but it has not installed and there is an error message "unable to install on this computer, please contact with the producer. I need to update the driver of 6.13.10.3514 version of lates version (6.14.10.4421). I know that I have to use the Toshiba drivers only. Could you be so kind and stick it to the post any link of this driver to download? I can't seem to find it on the Toshiba site anywhere.

  Hello

  You can not install it because of the material. AFAIK designed Toshiba drivers are slightly modified to be limited and protect the graphics card. Driver Intel can get the map on the maximum limit and destroy it. This is the reason why you can not install it.

  Sorry but there is nothing to do. Try to check if a new Toshiba unit has the same graphics card and latest driver on Toshiba download page. Date of arrival:
  Sat Pro L10
  Satellite L10
  Satellite A50 and A80 (6.14.10.3943)

  Good bye