Service made in muting the microphone Stopped!

Similar Questions

• IM using XP and it keeps running a shutdown of the system initiated by authority NT\SYSTEM w/status code 1073741482 & system process ' C:WINDOWS\system32\services.exe. How can I stop the closure?

  I get the following message: closing system, the system stops. Please save all work in progress and log off. All wukk unsaved changes are lost. This shutdown was initiated by authority NT\SYSTEM. The system process ' C: Windows\system 32\services.exe ended unexpectedly with status 1073741482 code. The system will now stop diwn and restart.

  I tried the boot, and all the days that something did not work if today I'm the switch back to the normal startup. I tried to run a scan, but it does not have the "clean boot" State... it would also not automatic updates... so here Let's go!

  I had the same problem, tried the clean boot, like Wells, and it has not fixed the problem.  Please try this:
  There are several steps to follow.
  The first is a suggestion from one of the blogs with a slight variation.

  First step:
  Enter safe mode.  (Put in the computer market, press F8 several times until the window offering the Safe Mode option appears.  Use your top and arrows to select Safe mode, and then click it.)

  Since the Office Safe Mode:
  1. right click on 'My Computer' and select 'Properties': my computer-> properties. This opens the "System Properties" dialog box

  2. Select the "Advanced" tab

  3. under "Startup and recovery", click on the button "settings".

  4. at the bottom, in the section "System failure", see what boxes are checked. Windows XP checks them all by default.

  5. click on "Automactically restart." This is probably your cause if you get automactic closures. As an alternative to optimise this method, you can, at your own discretion, also do the following:

  i. uncheck "write an event to the system log.
  II. check 'Send an administrative alert' (which should do more to view the sudden error rather than stop).
  III. uncheck "Automactically restart."
  IV. in the combo box of the section 'Write debugging information', choose '(none) '. Note that this will disable the rest under "information write Debuggin".

  6. your finished, then click 'Ok' to close the dialog of void and then 'Ok' again in the "System Properties" dialog box

  That should do it. Some upgrade suggestions are the best propally but I think these security only handle issues related to other areas if they worth downloads of 2 to 5 hours of 56 k modem for added security. However, I find that some updates are not even for my type of installation (due to unused configuration detection?) or I do not use the services.

  For more information on Tweaking, I suggest to look at "http://www.tweakxp.com" If you are a user of Windows XP.

  Good luck.

  Step 2:
  Also in safe mode.

  Some of these steps have been found on the microsoft Web site.  However, the following text is a little different and should translate into success.  It did for me.
  1) enter the Configuration of the utility system.  You can do this by done safe mode right click on Start, by choosing Search, then typing in msconfig and searching the c: drive.  Once the search is complete, click on one of the icons of msconfig.  This will bring up The System Configuration utility.
  (2) click on the tab general select Selective startup.
  (3) click to uncheck the Process SYSTEM. INI file.
  (4) click to uncheck the process to WIN. INI file.
  (5) click to disable Load Startup items.  Make sure that The Load System Services and use Original of INITIALIZATION. INI are checked.
  6) click on the Services tab.
  (7) click to select the hide all Microsoft Services check box.
  8) click disable all, and then click OK.
  (9) computer.

  Step 3: log in to Windows.

  (1) when you receive the following message is displayed, click Select, check box don't show this message or launch the system to Windows Startup Configuration utility , and then click ok.

  If this solves the problem, go to step 4.  If it is not the case, then you will need support from a professional.

  Step 4: find the culprit.

  1) enter in the System Configuration utility (SCU for future reference.)
  2) click on the Startup tab.  (NOTE: If you find "audm" within the list of starting points, it is most likely the culprit.) It was for me. If it is, go to If not, go to 3).
  (3) the top of the list in the start menu, check AN item, then restart the computer. Make a note of each element that starts without failure.
  Repeat this step until you get the window to "Shut down NT Authority... ».  This will reveal that the start point is the origin of the problem.  Once found, go to 4).
  (4) get in safe mode / SCU / Startup / untick the culprit.
  (5) restart Windows.  If this solves the problem, you are almost finished.  If this isn't the case, you will need the services of a professional.

  Step 5: remove the culprit and the reactivation of the process.
  1) go to Start / Search / and look for the item that caused the problem.  (When I did a search for audm - 2 released files.)
  (2) delete all files with the name of the offender and empty your trash.
  3) enter the Configuration of the system - (start/run/msconfig).
  (4) on the general tab, re-enable the Process SYSTEM.ini, WIN.ini processand Load Startup items.
  (5) restart the computer.   The problem should be solved.
   
  Basic suggestions:
  (1) ALWAYS keep a firewall- and choose the option "Open at Startup.  (That's how I think that was my problem - by not having is not the Firewall opens at the beginning).
  (2) perform a virus Scan is every DAY.
  (3) keep all windows programs and drivers updated - every DAY.
  (4) keep all antivirus programs and firewalls updated - every DAY.

  Good luck

  Non-XP-Prof.

• Security Center, to get the message: Security Center service is not started or was stopped. How can I enable Security Center?

  Centre of security gives her box that says the service "Security Centre" has not started or was interrupted.  Please close this window, restart the computer (or start the "Security Center" service), and then open the Security Center again.  I don't have no idea how to do to restart the service "Security Centre", but I rebooted the computer, same results.  Have updated with the latest changes and entries of security from the web site of Ms.  Under XP and IE8.

  Hello

  If I understand correctly, you are faced with the question with the Security Center.  I would like to know more information about the State of the question.

  1. have you made changes on the computer before this problem?

  2. do you use a third-party security software on your computer?

  Let us try the following steps to start the Security Center service; I'm sure this will help you to solve the problem.

  a. press the Windows key + R and type Services.msc and press ENTER.

  b. Locate the Security Center service.

  c. right-click the Service, and then click Properties.

  d. click the startup type and replace automatic.

  e. Click Start and then click Ok to save the changes.

  Also see the following Microsoft article:

  http://support.Microsoft.com/kb/919291

  Please reply with the status of the issue, so that we can better help you.

• I hear my own voice through the microphone. How do I stop this

  I hear my own voice through the microphone. How do I stop this

  Sort problem... I increased the sound level of the speakers microphone.

  Thank you.

• When I opened the Windows Security Center it says "the Security Center is currently unavailable because the Security Center Service is not started or was stopped.

  When I opened the Windows Security Center it says "the Security Center is currently unavailable because the Security Center Service is not started or was stopped.  I can't see if any firewall or antivirus works etc.  Anyway to reinstall the Windows Security Center or is there something else I can do.  Concerning

  Hello

  · Do you remember all the recent changes on the computer before the show?

  · What is the service pack installed?

  Follow the procedure described at the link below and check if it will help: error message when you try to open the Windows Security Center in Control Panel on a Windows XP computer: http://support.microsoft.com/kb/919291

• Recently, I installed Wubi, an application that allowed me to try out Ubuntu while still maintaining my installation of Windows XP. Sience I've not unhooked the Ubuntu Microphone stopped recording

  Recently, I installed Wubi, an application that allowed me to try out Ubuntu while still maintaining my installation of Windows XP. Sience I've not unhooked the Ubuntu Microphone stopped recording

  I tried to watch http://support.microsoft.com/ph/1173 and have searched to my problem on this page, but I came up with results relating to Windows 95.

  I checked the "recording control" and other kinds of options in my 'Control Panel '. Yet I came empty, any suggestions in this area of the Panel control, or elesewhere would be greatly appreciated. Thank you

  Hello Purplehaze412,

  Thank you for your message.  What kind of microphone do you have?  It's USB or it plug into the microphone as the speakers or headphones port?
  If it uses the headphone:
  Click "Start" > click on "Control Panel" > double-click "sounds and Audio devices".
  Select the tab "Audio".
  Under "Sound recording" you can change the default device?
  If it is USB, try the following:
  Click 'Start' > right click on 'My computer' > select 'manage '.
  Select "Device Manager".
  Double-click "USB" - remove your device microphone, remove the microphone, then plug it back to recognize.
  We can't wait to hear back on your part.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• the system configuration not saved during the last stop on the service console error

  Hello

  I m getting this msg of error on the service console

  the system configuration not saved during the last stop on the service console error

  but when I tried to run some commands s troubleshoot mode according to the vmware esxcfg-boot - b, esxcfg-boot - p I got an error message like

  bad interprator usr permission denied

  I guess you follow this KB: http://kb.vmware.com/kb/1002503

  But seems like you have file system errors.

  Try to restart your system in init 1

  Then use fsck command to check your ext3 file system (remember that the file systems are not in use and use the - f option).

  André

• How to make the setting for the microphone internal on my Dell Vostro 1540/1550?

  The speakers work, but the microphone does not seem to be connected.

  Hello

  ·         What operating system do you use?

  ·         Were there recent changes made on the computer before the show?

  ·         You get the error message?

  Method 1:

  Try using the Audio playback problems troubleshooting to solve the problem. It search common problems with your volume settings, your sound card or driver and your speakers or a headset.

  Open the troubleshooting of Audio playback

   

  Method 2:

  I suggest you to update the latest audio drivers from the Dell website and check if it helps

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  See also:

  Tips for solving common audio problems:

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  Method 3:

  I suggest you try these steps,

  Step 1: Using Windows Sound Recorder to test the microphone.

  You can use this section to find out if the computer can record a signal from the

  Microphone and play again. Use Windows sound recorder to create an audio file using the following steps:

  a. Click Start, all programs, accessories, and then click Sound Recorder.

  b. click start recording and speak into the microphone.

  When you are finished recording, click on stop recording.

  Screen automatically opens.

  Type a file name and click Save. A type WAV or WMA file is created in the Documents folder.

  If you can record the Audio using the Microphone using the method above then theMicrophone works well.
  Now, it should work in any application that Supports Microphone. If the computer records the audio using the method above, then it might be a problem with the Microphone settings. Now, check the following settings.

  Step 2: activating the Microphone.

  a. Click Start, all programs, accessories, and then click Sound Recorder.

  b. click start recording and speak into the microphone.

  c. Recording tab showing a signal detected for the Microphone device

  Note: must have green check mark on that Microphone icon. Is no green check mark, this means that it is disabled. If there is no green mark on micro it never works. To activate the Microphone, right click on Microphone and click Activate. If you do not see the Microphone in the list, right click on the white space and select devices see the disabled. Then, you'd see the Microphone. However, if you don't see the green check mark on it, right-click on it and click Activate. Select Microphone and click on set as default (if defined as default button is active).

  If you see the green checkmark on Microphone the Microphone really works.

  Step 3: Increase the Microphone sensitivity and non-disabling the Microphone.

  a. Select Microphone and click the properties button.

  b. move the slider up to 100% of its range.

  c. If the mute is enabled, click the button mute to reactivate the device.

  d. If the Microphone Boost is available, amplify the volume.

  e. click OK to make the changes.

• feed through the speakers to the microphone

  Although disableing the microphone, I get comments during playback of the media music, any suggestions

  Hello

  1 have had any changes made on the computer before the show?

  2. are you referring to the noise or the Narrator reads aloud the text that is displayed?

  4. what application you use to play music?

  Method 1:

  I suggest you to check if you have enabled the Narrator. If activated, try to turn it off and check if it helps.

  Reference:

  Hear text read aloud with Narrator

  http://Windows.Microsoft.com/en-us/Windows-Vista/hear-text-read-aloud-with-Narrator

  Method 2:

  I suggest you to refer to the article and disable improving audio speaker:

  How can I stop my music skip or break down when I play?

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-stop-my-music-from-skipping-or-breaking-up-when-I-play-it

  Method 3:

  Refer to the section "what can I do on the audio problems, such as popping, crackling, or sound that plays too fast or too slowly?" in the following link and check if this can help:

  Play an audio or video file: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/play-an-audio-or-video-file-frequently-asked-questions

  If the problem is not resolved, please provide more information to help you best.

• If my software update of the Appstore stops to say 1.3 GB of 6.4 GB due to network etc problem it back once again to 1.3 GB rear or all the way from scratch

  If my software update of the Appstore stops to say 1.3 GB of 6.4 GB due to network etc problem it back once again to 1.3 GB rear or all the way from scratch.

  Hello Anshul230499,

  Thank you for using communities of Apple Support.

  If a download was interrupted in the Mac App Store, then whenever you have new Internet download should then restart.

  If a download application is interrupted

  Once an Internet connection is restored, your purchased downloads should restart automatically. The Mac App Store may warn you that there is a problem with the download and ask if you want to restart downloads. Confirming will restart all pending downloads.

  Download time may vary according to the size of the file and the speed of your Internet connection. See this article on purchases made on iTunes Store for more information on the time to download large files.

  Troubleshooting the Mac App Store

  Take care.

• Portege R830 - Internal Microphone stopped working

  Hello

  I have a Portege R830 1 month. Using Windows 7 64 bit. Set up Skype and everything was working 2 weeks ago now only the video work. The microphone has stopped working.

  I installed the latest Realtek HD Ausio Driver and Webcam driver. The setting of the microphone is not cut and leave and Booster is the max. This is the default recording device. The only thing that has changed is I tried external speakers and also started using a docking station.

  It drives me crazy. Any ideas? I wonder if it's a hardware problem?

  Hey,.

  You use the preinstalled version of Windows 7 in Toshiba or is it your own installation?

  The microphone is a part of webcam and this is why you need to install the driver for the webcam. You wrote that you reinstalled the driver for the webcam, but did you remove the old version first? You must remove the older version first, and then restart your laptop. In addition, use CCleaner (freeware tool) to clean the registry and restart. Then your computer is ready for a new driver.

• The fan stops after the Satellite U500 - 10Jwas turn

  Hello! I need help!

  The fan stops after turn backwards to laptop my laptop Toshiba gives me the warning "a problem with the cooling system has been detected. Please, turn off computer immediately and return it for service.

  The fan works for several minutes and stops.

  I clean all the dust, I do not have anything with the hardware and software.
  What the reason for this?

  Hello

  What model of laptop do you have exactly?
  It looks like a cooling module problem for met.

  I think it needs to be replaced and this can be done by Toshiba service in your country.

• Need info on the microphone on Satellite Pro A120 Jack

  Hello

  I am using Skype with my A120SE and bought a Logitech Internet Chat headset. However, the volumes of micro are acceptable with the sensitivity turned to max and thrust box checked in the audio properties of XP. But the amount of "white noise" is unbearable. The Web from Logitech website suggests that the microphone is a type of capacitor requires a voltage of 3V polarization, and this poor performance can be caused by an inadequate diet. I also noticed that headsets/microphones of some other manufacturers suggest a bias voltage 1.5V.

  I can't find any specification tecniques for the Toshiba microphone jack. Can anyone help, or can anyone suggest a reasonable headset which worked with the A120SE?

  Hello

  I quite often here and if I remember right you are the first person who wrote about the bad experience with the use of the helmet. Generally avoid any problem. Logitech stuff is good quality material and I wonder really subject described.

  I'm really skeptical that someone can give you info on the mic socket. Try contacting a service allowed in your country. Maybe they can help you. I use Sennheiser headphones and I am very satisfied. It's really high quality product and I can recommend it.

• Hello. There is a problem on the IPhone s 5 - after reset, the display flashes on the sides for 10 minutes, then the flashing stops. And the problem does not appear again until they do not use a Hard Reset (Power Home). The phone is new (5 days). It's a m

  Hello. There is a problem on the IPhone s 5 - after reset, the display flashes on the sides for 10 minutes, then the flashing stops. And the problem does not appear again until they do not use a Hard Reset (Power + Home).

  The phone is new (5 days). It's a wedding?

  If you encounter this flicker, then the next troubleshooting step is to restore from a backup. If the behavior persists after the restore, then the last step is the factory restore. If after the factory restore and adding no additional content, you see always this problem, then you must make an appointment at the Genius Bar to the nearest Apple store or service provider authorized Apple to have the material examined. If the behavior goes after the factory restore, then sync again your content manually, without using the backup. It seems to me it's corrupted content in the backup.

  Restore your device from an iCloud or iTunes backup - Apple Support

  Use iTunes to restore your iPhone, iPad or iPod settings - Apple Support

• How to easily turn on/off the Microphone on the Satellite A350-13 has?

  1. real Tek HD audio

  2. When you use the computer in the classroom to play with the sound from a video clip... I would get a significant background noise.
  I was told that my built-in mic picked up his... then I had to disable the microphone. I did this and got rid of his background...

  3. it seems that by turning off the microphone, that when I try to turn on the microphone in the under levels and speakers Control Panel... I do not get the microphone back... and so cannot use the internal MIC for Skype.

  I need to reinstall something every time I turn the microphone off? Because no, it does not recognize that I have a microphone in the tek box icon from the control panel.

  A second problem is that even when I don't mean to reproduce the sound of anywhere, or even when Skype is not enabled... I get something like static spraying load every minute or so...

  Questions are...

  1. how to activate easily and hell... both internal and external microphone and the microphone jack on the front?

  2. how to stop this recurring static noise of sputterng?

  Thank you

  Ayman

  Click with the right button of the mouse on the speaker symbol in the task list and choose the recording devices.
  In the list, it must be Microphone and click with the right button of the mouse and choose the option Disable.
  I hope that the microphone is disabled. Even you can do with FrontMic if you do not find what are listed there.
  I use Skype every day and play the video clips but never noticed any kind of problems with sound or background noise.

  Second problem is not understandable for me and I can't tell you anything on this subject.
  Maybe if I could have your laptop in front of me to hear exactly what is happening.