Service monitoring on virtual machines in windows

Similar Questions

• Virtual machine from Windows XP to Windows 7 Professional

  Two years ago the virtual machine from Windows XP was installed on my laptop which has Windows 7 Professional.  I use version XP for playing games is not compatible on Windows 7.  Everything worked well until a few weeks ago.  I was unable to open the games.  An error message window is displayed when I click to start the game.  "C:\WINDOWS\SYSTEM32\CONFIG. NT.  The file system not suitable for running MS-DOS and Microsoft Windows applications.  Choose 'Close' to terminate the application. "The top border of the window says error message"16 bit Windows subsystem.   Any ideas.

  After temporarily off any protection, I tried restore and recovery without success.  Error message says that both failed.

  Please keep in mind that I'm completely computer illiterate.  Thank you.

  Hello Willias,

  Thanks for posting your question on the Microsoft community.

  The question will be better suited to the audience of professionals on the TechNet forums.

  I would recommend posting your query in the TechNet forums.

  TechNet Forum
  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Thank you

• Monitoring of virtual machines running on the UCS blades

  We are in the process of migration of servers HP rack to Cisco UCS blades. I have 4 blades UCS running ESXi and dΘmarrez from SAN. We have configured in HP SIM HP servers to monitor hardware issues and the status of the VM. Now Let's watch the material of the UCS in UCS Manager, but I still need to monitor the status of virtual machines. I looked at existing Solarwinds NPM we have all our ESXi HP servers to Solarwinds. What I've discovered, is that we cannot add the individual to NPM ESXi blades, because we can not configure SNMP (or we).

  Which means that migrate us from HP servers for UCS blades, we lose the ability to monitor the State of the CPU and VM.

  How people monitor their virtual machines in an environment of UCS?

  Thank you.

  We monitor our UCS ESXi 5 with SNMP hosts and use Solarwinds NPM.  It works well.  These are the commands that we send through our VMA (free VMware) server to a new host.

  vicfg-snmp - root server - username - password it

  vicfg-snmp - root server - username - password you @162.

  vicfg-snmp - root server - username - password e

  There's probably a way to do it on the console of the host, but I don't know what it could be.

• Windows 7 a vmdk file not found, cannot open the file '... Virtual Machines.localized/Windows 7.vmwarevm/Windows 7. VMDK

  Could not open the file ".../Documents/Virtual Machines.localized/Windows 7.vmwarevm/Windows 7.vmdk:

  Help, please. I copied this over from a backup and it does not open. I joined the collection of support...

  Thank you very much!

  B

  it2webber wrote: could not open the file ".../Documents/Virtual Machines.localized/Windows 7.vmwarevm/Windows 7.vmdk:

  Help, please. I copied this over from a backup and it does not open.

  How the Virtual Machine has been backed up and restored?  If Time Machine then...

  It is a known fact that Time Machine is not 100% reliable backing up/restoring VMS in all circumstances/conditions.  Also back up Virtual Machines via Time Machine of disk/time intensive and wastes a lot of space for something that may be corrupted and worthless time to restore it.  At least I would exclude the Virtual Machines with virtual machines and Time Machine shutdown, not suspended and VMware Fusion closed and then manually copy the VMS to another location, preferably on a different physical hard drive.  So keep the user data stored in the virtual machine saved out of the Virtual Machine on a regular basis in order to always have a backup of the current user data.  If you need to restore a properly saved by VM is not as common at least you will have a virtual working Machine and data user to go forward with when you find out your Time Machine backup of the virtual machine fails.  Also take a look at: best practices for backup of virtual machine (programs and data) in VMware Fusion (1013628)

  That said, if you don't have a copy of the file "Windows 7 - f004.vmdk" and then to try to retrieve the data from the user, you can try the following:

  Download then unzip it (double-click on) the joint "Windows_7 - f004.vmdk.zip" file that contains the file "Windows 7 - f004.vmdk ' an empty logical binary measure that has been created on the metric of the existing drive and add to the Package of the Virtual Machine.  This should allow the VHD to be considered as a virtual hard drive, assuming that there is no damage to the extent of the binary left headers.  Take a look on: work with Virtual Machine packages

  At this point, that the VHD has the scope necessary to show as a full disk, assuming that it is not corrupt the header in other binary extensions and can now attempt to access for the recovery of user data.

  There are several ways to try to retrieve user data.  The easy, although not necessarily work properly according to what now lack us due to replace the missing binary extensions with a logical empty measure, is trying to start the VM normally.  If the virtual machine starts up on the desk and VMware Tools load properly you should be able to copy your data to user off on a USB or slip and fall on the side of Mac or if you have a configured VMware folder then copy the files through it.

  Other methods involve starting the Virtual Machine with a Live OS ISO Image and copy files from a USB key or temporarily assemble the VHD to another Virtual Machine work.

  With the right tools installed the virtual hard disk could also be mounted as another accessible Volume through Finder.

• URGENT! After installing 6 Fusion and creation of new virtual machine with Windows 7, I get a message "VMware Fusion cannot enter the unit". WHAT SHOULD DO?

  After purchase, installation and activation Fusion 6 with the license key, I had a library of VMS showing 2 Boot Camp partitions. It's strange that I only have 1.
  I tried to activate them but received a message that it is out of date in 2 cases. (see annex 1)

  I started a new virtual machine with a Windows 7 installation disc directly on my HD. I have provided a way to do this and followed the instructions of Fusion to the screen.

  Apparently, everything went well and after several restarts, the installation appears to be over (see annex 2) I tried to open and run the installed Windows 7. I had however a window with the following message:

  "Pending the unit.

  "VMware Fusion cannot enter the unit. Please wait until the unit starts automatically, or interact with the virtual machine below. ' (see annex 3)

  Here Windows 7 seems to start but after a while with the home screen and of the Øresund finishing this window closed and open a new window called library Virtual Machine on the left showing the partitions of Bootcamp and the Virtual Machine Windows 7 x 64 and in the middle gray a representation of what is supposed to be the Windows 7 desktop. (see Exhibit 4). When I opened the settings button a window with different setting options pops up. This mark means to me that Windows is installed but the final opening isn't the case

  When you quit Vmware Fusion indeed Windows seems to be close (see part 5)

  What is going on? What has gone wrong? What should I do? I don't know how to solve the problem.

  I should f.i. remove the virtual machine from Windows 7 and is free automatically made partition on my HD as the reboot with the Windows installation disc? or y at - it another way to enter the UNIT?

  Help, please!

  Thanks in advance

  Your virtual machine is running. It is in the unit - which each windows gets its own window of Mac - and you have no application Windows running, there is no visible windows. You can start a Windows application in the start of Fusion menu in the menu bar at the top right, or turn on the Windows task bar on the view menu and start applications from there. Or use the view menu to switch to the Single mode or full-screen, which puts all of your Windows desktop in a window separate from Mac.

  You do not have two partitions to Boot Camp on your Mac, you have two virtual machines named "Boot Camp partition".

  The message about it being unable to enter the unit arrives while the merger is pending for the tools begin to run, because the tool is necessary for the unit.

• Virtual machine from Windows 8 not found

  Performance of Fusion 5.0.2 with Lion mountain on a MBPro.  Created a Windows 8 VM and all seemed well.  I got a message today when Windows 8 was running.  I don't remember what he said, but he indicated that the VM could not suspend due to the fact that a name had changed.   I closed my programs and stop windows 8 wth no descendants.  I stopped VM and rebooted.  Now, when the Virtual Machine library appears it shows Windows 8, but it is not found, said. Can someone help me solve this problem.  I hope I don't have to rebuild the virtual machine.  Thank you very much.  Dave

  According to the support group, the "/ Users/klodigensky/Library/Application Support/VMware Fusion/vmInventory ' file all of the Virtual Machine must be located in" / users/klodigensky/Documents/Virtual Machines.localized / Windows 8.vmwarevm»  Note that by default, .localized extensions and .vmwarevm are hidden.

  I guess it's is gone which means it has been moved or deleted and you looked in the trash for her?

  Also if he was moved accidentally, you should be able to find it in a Terminal by using the following command:

  mdfind .vmwarevm
  

  Another way to get it is by using a program like disk inventory X that graphically display the contents of the hard drive and because of the Virtual Machine tend to be bigger then most files should be quickly noticeable.

  Otherwise there is not much more to offer in this case.

• Problems after resizing XP virtual machine: a Windows image not valid

  After increasing my Windows XP virtual machine, I can't run Microsoft programs.

  My system

  I am running XP as a virtual disk with Fusion 4.1.3 on a MacBook Pro (OS X 10.6.8 Snow Leopard) with a drive of 500 GB and 4 GB of RAM.  My virtual machine from Windows XP (formatted FAT) has only 700 MB of free space, so I tried to increase its size from 32 GB to 48 GB.

  What I've done

  1. I increased the size of the HD in merger/disc settings

  2. the virtual machine does not resize automatically.  Messages to OS X Console says repeatedly that the virtual machine was no resizing applications ("' NUMA: auto size request ignored '")

  3. I then used EaseUS Partition Master in Windows XP to increase the use of the newly released hard drive space, but the extra space would never appear after reboot XP

  4. I then tried Partition Wizard, that worked.  So that resizing Partition Wizard was also moving files.

  The problem:

  When I restarted Windows, I got several error messages saying that the dll is not a valid windows image.  I couldn't run all Microsoft programs (Outlook, Excel, etc.) but can run non-Microsoft programs after clicking through many error reports.

  Fortunately, I made a copy of the virtual machine before attempting to resize, so I use it now.  But I lost 12 GB on my Mac hard drive and cannot get enough space in Windows

  Any thoughts out there so that I could get enough space?

  It is good that you made a backup, because even in the best conditions can things and sometimes lack.

  Since you had questions, go right to work, in other words, the first step to actually make the larger virtual hard drive, I have consider doing the following.

  1. ensure that you have a backup full host.  Time Machine is great for Mac OS X but not for Virtual Machines.  For the Virtual Machines, you must make a copy while closed stop, unsprung, and VMware Fusion.  Once you are sure that have everything backed up properly...

  2. use utility disk to verify disk permissions, disk check and optionally repair either or both based on audit reports.

  3. use vmware-vdiskmanager with the -r option to check the integrity of the virtual hard disk.

  4. from the guest operating system in a Windows prompt command use chkdsk /f to check and fix a problem with the Windows file system.

  5. try to resize the virtual hard disk again.

• can fix wood? "/ Documents/Virtual Machines.localized/Windows 7.vmwarevm/Windows 7.vmx ' is not a valid virtual machine configuration file

  Hi all

  I had this error on my windows machine 7

  "/ Documents/Virtual Machines.localized/Windows 7.vmwarevm/Windows 7.vmx ' is not a valid virtual machine configuration file

  I know that there is a guy named wood that can be attached, if the vmx file and log files

  Hope that the joint can be used to repair

  Thank you

  Jack

  Welcome to the community,

  I'm sure that WoodyZ will be able to solve this problem and will come with a file like the one I've attached to this message

  André

• Lion running as a virtual machine under Windows (in front of the normal).

  Long story short, I'll install Windows (natively) on my MBA (lots of reasons - application compatibility, management files, etc.) but would like to have OS X on the side to play with. Anyone have any experience using OS X Lion in a virtual machine under Windows? Since it IS an Apple computer brand, I think it would be legal Yes? I'm guessing there will be VM Tools, but again, since it is an MBA, the drivers should be built anyway?
  
  Thank you

  First VMware does not support Mac OS x (and version) running under Windows!

  Mac OS X Lion, which is preinstalled cannot be legally virtualized and to virtualize Mac OS X Lion, you need to have a copy that was purchase on the App Store or on USB and then can only be virtualized on Mac OS X Lion!

• Memory of the virtual machine in Windows 2008 32-bit Aignesberger.Software.website.Watcher.2010.busines

  Dear all,

  I installed the virtual machine with Windows 2008 32 Bit Standard Edition. Compact, his oar was 2 GB at this time there, everything was fine, I increased the ram to 4 GB. Now my Easerver 6.3.1 got crashed and pursuant to the original agreement we also reinstalled/reconfigured EA server, but it is always showing 2048 MB of memory instead of 4 GB.

  
  

  2554-11-08 13:09:17.733 INFO wire-34 after USER ID = Adeelme:cms
  Type of Message 2554-11-08 13:09:17.733 INFO wire-34 = Debug
  Virtual memory use Java ScheduledTask:Dump60SecondMemoryUsage [CheckMemoryUsageTask] INFO-2554-11-08 13:10:00.046: 19% (94/264/494 MB)
  Virtual memory use 2554-11-08 13:10:00.046 process of ScheduledTask:Dump60SecondMemoryUsage [CheckMemoryUsageTask] INFO: 98% (2016/2047 MB)
  Virtual memory use Java ScheduledTask:Dump60SecondMemoryUsage [CheckMemoryUsageTask] 13:11:00.051 INFO-2554-11-08: 21% (104/264/494 MB)
  Virtual memory use 2554-11-08 13:11:00.051 process of ScheduledTask:Dump60SecondMemoryUsage [CheckMemoryUsageTask] INFO: 98% (2016/2047 MB)
  2554-11-08 13:11:15.000 INFO component/method name Thread-34 [JaguarServer] = n_app_controler/of_getapplication

  Type of Message 2554-11-08 13:11:18.631 INFO wire-34 = Debug
  Virtual memory use Java ScheduledTask:Dump60SecondMemoryUsage [CheckMemoryUsageTask] INFO-2554-11-08 13:12:00.052: 14% (74/264/494 MB)
  Virtual memory use 2554-11-08 13:12:00.052 process of ScheduledTask:Dump60SecondMemoryUsage [CheckMemoryUsageTask] INFO: 98% (2016/2047 MB)
  

  Thank you

  Adeel Imtiaz

  Yes - you can
  but that will make your VM very slow

  set
  prefvmx.minVmMemPct = "50".

  or less - allowing you to approve the RAM
  Set this parameter in your config.ini file

• Monitoring of Virtual Machines

  Hello

  VCenter is capable of monitoring inside virtual machines? (For example space logical disks inside the VM disk) and we can add alerts?

  If not, is there a technical reason not to do so? (I know you can monitor inside the virtual machine and RAM vCPUs and...)

  VMware plans to control these things, or you need a third party software to take care of this task for you?

  I don't want to buy a tool of surveillance as a tool for monitoring vFoglight / ip and discover VMware will have these features in the future.

  Any comments will be appreciated.

  Said wrote:

  VCenter is capable of monitoring inside virtual machines? (For example space logical disks inside the VM disk) and we can add alerts?

  Laughing out loud

  I don't want to buy a tool of surveillance as a tool for monitoring vFoglight / ip and discover VMware will have these features in the future.

  There are free tools available, they use SNMP or WMI or watch the "/ proc" for Linux.

  AWo
  VCP / VMware vEXPERT 2009

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• Discovers virtual machines on windows Server 2008 core

  If I load/install virtual machines, windows 7 or windows server on a Windows Server 2008 R2 Core and SCVMM to manage virtual machines, can I open and discovers virtual machines on the Server Core machine.

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Install Windows XP on a Virtual Machine in Windows 8

  I tried to clone an installation of Windows XP on a DELL portable computer that almost died of old age in a Virtual Machine on my new computer Windows 8.  Windows 8 will not work some software I need and that you've used for years on the old laptop.  The installation seems to work until I log on the virtual machine.  Then a window pops up saying that I have to activate the Windows installation.  I tried to use the activation code I got from Dell, but Windows does not recognize it so I went to the phone and Windows system does not recognize the code that shows my installation.  Is it possible that I can get this facility enabled?  I'm not going to update my old software and I want to use this virtual machine to run older software that are not compatible with Windows 8.

  It seems that Microsoft doesn't sell XP more.  I have a Windows XP disc that is not way OEM before SP2 is out, but I want to keep all my software from the recent to install without having to re - install some programs of 20 or 30.  Can anyone help?

  It seems that Microsoft doesn't sell XP more.  I have a Windows XP disc that is not way OEM before SP2 is out, but I want to keep all my software from the recent to install without having to re - install some programs of 20 or 30.  Can anyone help?

  You changed and added this part around the same time I posted my other answer.
   
  The CD is not everything you need - you need the product key.  You have the product key?
   
  If yes - you can integrate the SP3 in Windows XP's media retail, you have (not updated, full retail) and then use it to perform a REPAIR installation with your product key found.
  How to perform a Windows XP repair install

• Reinstall Windows XP in Virtual Machine on Windows 7

  I have the Virtual Machine Windows on my OS Windows 7 Professional. This allowed me to install Windows XP on this computer. It worked fine for several months until, from one a few days ago, I cannot access the XP and have been advised by Microsoft to simply re - install the XP software and start again. When I try this, I said that the first step is to download and run a MS file named GenuineCheck.exe which is supposed to validate my system. When I try to run it, a note comes up saying that this file is obsolete. Do a little digging online, I told myself that this ony file works if you have Windows XP. What the definition of Catch 22? I have an XP corrupted in my virtual machine, so, technically, I have Windows XP. Any ideas on how I can be validated?

  If you do not store a copy of the Windows XP Mode Setup file?

  WindowsXPMode_en-we

  Click Start, type: programs and features

  Press enter

  Scroll down and select Windows XP Mode, click Change/uninstall in the command bar

  Restart when you have finished, and then try the installation again.

  If you don't have a copy of the installer, you need to download again in Windows 7 Professional and reinstall:

  Both Windows XP Mode and Windows Virtual PC can be downloaded from http://www.windows.com/business/downloads.

  For more information about system requirements, please visit http://www.microsoft.com/virtual-pc

  Resources:

  http://www.notebooks.com/2009/11/23/using-Windows-Virtual-PC-with-Windows-XP-mode/

• Restore the Virtual Machine from Windows 7

  I had set up a virtual computer on another partition on my drive (D:\VM) and my computer crashed and the computer scientist did a restore of the C: drive and I am not currently able to do the old VM to work. I have the following files listed under D:\VM

  License.NLF

  Windows XP Mode.vhd

  Windows XP Mode.vsv

  Windows XP Mode.vmc

  Windows XP Mode.vmc.vpcbackup

  Looks like the latest state of the virtual machine is on hypernation. How can I make my old VM to work? Need help!

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
  http://social.technet.Microsoft.com/forums/en-us/w7itprovirt/threads

  Hope this information helps.