How to start from the disc in vista to install windows 7

Similar Questions

• avoid starting from the trojan CD Vista

  Windows scan false captured Trojan horse. Protection and disabled system restore. Original dell drive used to start from the CD-ROM. would restore not before the infection on April 18. Now have a version where I can't pictures etc. Have windows vista old and would get in other parts of my programs. At a loss as to what to do or how to do to recover my system to his old self less the Trojan horse. Any help would be appreciated.

  Hello

  You cannot access the windows.old folder programs

  It is only to recover data from

  programs need to be reinstalled

  read this

  How to restore your personal files after you perform a custom Windows Vista or Windows 7 installation

  http://support.Microsoft.com/kb/932912

  remove malware

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You should also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Satellite L300, how to start from the cd/dvd external USB drive?

  I have an old laptop Satellite L300, latest version of the BIOS (2.20) installed.
  I would like to start on a connected external USB CD/DVD player
  PROBLEM:
  BIOS will not start on this CD/DVD disc.
  In the BIOS boot priority is: CD/DVD, USB, HDD
  BEHAVIOR:
  When starting, computer ignores the CD/DVD, ignores the USB and start on the HARD drive.
  QUESTION:
  Is it possible at all boot for CD/DVD USB external?

  Thanks for the efforts made to respond.
  Concerning

  It is NOT possible, I thought. REASON: The BIOS does not, does not reckognize CD/DVD (does not test if code such USB-CD/DVD bootable) drive connected via USB.

• Satellite C70D - how to start from the DVD

  Hello
  You just bought a Satellite C70D with Win 8.1. Everything works (as much as I know to knowledge), except start it from the DVD. I disabled the Secure Boot in the bios and changed the boot order on a DVD first, then USB and HARD drive. The DVD player starts, but then it jumps on the HARD disk and Windows is started. First time I tried there was a message like "DVD boot not supported" or something like that.
  The DVD is bootable, so it's not the problem.
  I want to install Linux Mint alongside Windows.
  Someone has already solved this problem?

  Update: changing of UEFI CMS in the Advanced BIOS tab at the start of the DVD, but Windows no longer starts. Is it possible to boot from DVDE and still be able to start Windows as well?

• How can I stop the pop up asking to install windows 10? I don't want to install it.

  The Windows icon appears on my Windows 7 taskbar and a pop frequently trying to make me install Windows 10.  I don't want Windows 10.  I don't want to be questioned about the Windows 10.  It is at this point the malware.  To stop.

  Easy way: http://blog.ultimateoutsider.com/2015/08/using-gwx-stopper-to-permanently-remove.html

• Cannot start from the CD in my Satellite P300-23F

  Hello

  I'm trying to fix the old laptop from my brother. It's a Toshiba satellite p300-23f. The laptop did not work well, so he bought another. I think he might have a problem with the HARD drive, but I'm not sure about this and want to try to format the HARD drive and reinstall the operating system.

  When I start from the disc HARD I have no problem, insiders of OS normally, and I can 'use' laptop. The problem is when I try to boot from the OS CD. I get this message "Media test failure, check cable". I know the CD works, because recently I have instaled the operating system with this CD on another computer. I know that the CD player (not sure if it is called like this, but I think you understand what I mean) also works very well, because I tried different CD and it worked.

  I've tried pressing F12 and boot from CD it and also tried to change the BIOS and put the CD in the first place, but it does not work.

  No idea what's going on? Is it possible to make it work?

  Stand by.
  When Windows is completely loaded, you can use the optical disk drive and it reads all CDs and DVDs?
  When you put your Windows Windows installation disc can see the contents of the disc in Windows Explorer?

  Maybe you can use the CD but not DVD. check it out please.

• How to boot from the CD from Toshiba - Satellite 2450-101?

  Hello everyone,

  I would like to know how to start from the cd to install windows xp.
  I have a toshiba laptop (Satellite 2450-101).
  I'm not sure but I think dat This model has a DVD player in scii. Dat is the problem?

  Kind regards
  Steve.

  Hello

  If you use the internal CD/DVD drive you press simply the C key immediately after starting the laptop or you will simply change the boot order in the BIOS to CD/DVD drive.

• How to boot from the flash drive which has xp to install an OS?

  Boot from the flash drive

  How to start from the flash drive which has xp to install an OS

  the system's model of netbook rlg

  Intel Valérie mgsone

  How to install Windows XP on a Netbook using a USB flash drive
  http://www.TechSpot.com/VB/topic160906.html

  J W Stuart: http://www.pagestart.com

• I accidentally deleted all my settings and the apple iphone 6 s ID. Now I have to activate my phone and start from the beginning. But I don't have my EA sim with me right now and cannot organize any sim EE. How can I activate my phone without sim card?

  I accidentally deleted all my settings and the apple iphone 6 s ID. Now I have to activate my phone and start from the beginning. But I don't have my EA sim with me right now and cannot organize any sim EE. How can I activate my phone without sim card?

  Sorry, but you can't activate an iPhone without a SIM card installed. It is simply not possible to do.

• How to add programs to the start of the file using Vista

  How to add programs to the start of the file using Vista

  Hi Harry,.

  Oddly enough, you can actually do it in msconfig except if it is already there and simply not checked as opposed to not being do not at all (although you would think that they would understand this option).

  The easiest way is to add the program (or a shortcut to the program) in the folder all Menu Programs Startup.   Here is the procedure: http://www.ehow.com/how_5098465_add-startup-programs.html.  Remember, to do this, you must either a shortcut existing (perhaps on the desktop or elsewhere in the menu all programs) or you need to find the source file (probably somewhere in C:\Program Files depending on what you want to add) and either copy it and add it to the startup folder or right-click on it and create a shortcut to copy into the startup folder.  Once you reboot, this program starts during the initial commissioning process and you will now be able to control using msconfig.exe, if you wish.

  Another option is to do this by using the registry editor.  If you decide to try this, first create a restore AND system restoration point backup of the registry before you begin.  Here is the procedure: http://www.ehow.com/how_7304438_add-program-msconfig-regedit.html.  I recommend to use this ONLY if the previous procedure does not work for some reason any as long as that the procedure is simpler and safer.

  If you want a simpler way to manage and control startup programs, you can try it free WinPatrol http://www.winpatrol.com/download.html that change monitors for startup programs if you set it to run in real-time so that you know when to try new programs are added to your Start menu and, for the purposes of this question includes an Add button which opens a link to a window of Windows Explorer where you can browse the program you want to add, click open to select and then add it directly to the commissioning.  If you prefer it does not work all the time, you can simply uncheck the box which includes this program and it will work only when you choose to run (but at the start, will work as an indication otherwise or configured).  It will appear not in the start menu in all programs (Finally, WinPatrol is, but not programs, it adds to the start), but it will appear in WinPatrol (which also lets you manage what you want or not start with checkboxes as in msconfig) and sure in msconfig - but only after a reboot is complete the process of adding.

  I hope this helps.  Personally, I use WinPatrol myself and let it run in real time.  Since I do a lot of installations, it helped me often prevent the addition of a startup item I haven't really need and reduces how many times I actually need to check what is happening out there.

  If this answers your question without the need to repost in another forum, please mark it as an answer.  If this isn't the case, then of course you must republish as suggested above.

  Good luck!

• Vista - computer will not start without the disc

  loaded vista on my computer - now computer will not start without the disc

  Went into my bios as suggested to check the boot order - and, Yes, I got HDD1 as first boot then CD - but then I remembered something I had seen earlier on my computer - it was on the list the HD which had my system like HDD0 files - so, I checked and there it was - listed option HDD0 so I changed HDD1 of HDD0 and was able to boot my computer without the disk system.  Hope this helps someone else with the same prob.

• Followed my previous inquiry, my hard drive crashed and lost my copy of Acropbat 9 in installing the new hard drive.  How can I go to re - install Acrobat 9 from the disc, I hold. Thank you, Don Hamilton

  Followed by my previous inquiry, my hard drive crashed and lost my copy of Acrobat 9 in the installation of the new hard drive.  How can I go to re - install Acrobat 9 from the disc, I hold. Thank you, Don Hamilton

  Just reinstall from the disc (or download it from https://helpx.adobe.com/acrobat/kb/acrobat-8-9-product-downloads.html) and activate it with your serial number.

  If your number of activations exceeds max (2), then you will need to contact customer service.

• I have already installed LR4 and a new disc with LR5 on it (never activated - have the serial number).  I don't have a drive on my computer to install from the disc.  How can I go on upgrade to LR5?

  I have already installed LR4 and a new disc with LR5 on it (never activated - have the serial number).  I don't have a drive on my computer to install from the disc.  How can I go on upgrade to LR5?

  Download the installation files and use the serial number, you need to activate.

  Lightroom - all versions

  Windows

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Windows

  Mac

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

• ESX 2.5 - How can I confirm if the server is start from the MUI SAN or SSH?

  ESX 2.5 - How can I confirm if the server is start from the MUI SAN or SSH?

  [root@esx011 /] # wwpn.pl
  vmhba0: 210000e08b1a51d3 (Qlogic) 5:4:0
  vmhba1: 210000e08b1a03d1 (Qlogic) 7:3:0

  [root@esx011 /] # wwpn.pl - v
  WWPN 1.02 Copyright VMware 2003
  Display the names of WW and VMHBA ports for fiber channel cards
  For each relevant here are the Qlogic vmhba and names of Port Emulex WW
  Adapter WWPN PCI (decimal)
  vmhba0: 210000e08b1a51d3 (Qlogic) 5:4:0 / proc/scsi/qla2300/2
  vmhba0:0: scsi-qla0-port-0 5005076300c7b4a2 = 5005076300c0b4a2:5005076300c7b4a2;
  vmhba0:10: scsi-qla0-port-10 500507680110b79d = 500507680100b79d:500507680110b79d;
  vmhba0:11: scsi-qla0-port 5005076300cc9561 - 11 = 5005076300 c 09561: 5005076300cc9561;
  vmhba0:12: scsi-qla0-port-12 5005076300c80db4 = 5005076300c00db4:5005076300c80db4;
  vmhba0:13: scsi-qla0-port-13 5005076300cbb0b1 = 5005076300c0b0b1:5005076300cbb0b1;
  vmhba0:1: 500507630308414 d scsi-qla0-port-1 = 5005076303ffc14d:500507630308414 d;
  vmhba0:2: 500507630313414 d scsi-qla0-port-2 = 5005076303ffc14d:500507630313414 d;
  vmhba0:3: scsi-qla0-port-3 5005076300c7b0b1 = 5005076300c0b0b1:5005076300c7b0b1;
  vmhba0:4: scsi-qla0-port-4 5005076300cbb4a2 = 5005076300c0b4a2:5005076300cbb4a2;
  vmhba0:5: scsi-qla0-port-5 5005076300cca01d = 5005076300c0a01d:5005076300cca01d;
  vmhba0:6: scsi-qla0-port-6 5005076300cc0db4 = 5005076300c00db4:5005076300cc0db4;
  vmhba0:7: b 500507680140, 799 scsi-qla0-port-7 = b 500507680100 799:500507680140 b 799;
  vmhba0:8: scsi-qla0-port-8 5005076300cfa01d = 5005076300c0a01d:5005076300cfa01d;
  vmhba0:9: 5005076300 c 89561 scsi-qla0-port - 9 = 5005076300 c 09561:5005076300 c 89561;
  vmhba1: 210000e08b1a03d1 (Qlogic) 7:3:0 / proc/scsi/qla2300/3
  vmhba1:0: scsi-qla1-port-0 5005076300d0a01d = 5005076300c0a01d:5005076300d0a01d;
  vmhba1:10: scsi-qla1-port-10 5005076300cf0db4 = 5005076300c00db4:5005076300cf0db4;
  vmhba1:11: 500507630318414 d scsi-qla1-port-11 = 5005076303ffc14d:500507630318414 d;
  vmhba1:12: 5005076300 c 49561 scsi-qla1-port - 12 = 5005076300 c 09561:5005076300 c 49561;
  vmhba1:13: 5005076300 d 09561 scsi-qla1-port - 13 = 5005076300 c 09561:5005076300 d 09561;
  vmhba1:1: scsi-qla1-port-1 5005076300c4b4a2 = 5005076300c0b4a2:5005076300c4b4a2;
  vmhba1:2: b 500507680130, 799 scsi-qla1-port-2 = b 500507680100 799:500507680130 b 799;
  vmhba1:3: scsi-qla1-port-3 5005076300c4b0b1 = 5005076300c0b0b1:5005076300c4b0b1;
  vmhba1:4: scsi-qla1-port-4 5005076300d0b0b1 = 5005076300c0b0b1:5005076300d0b0b1;
  vmhba1:5: scsi-qla1-port-5 5005076300c4a01d = 5005076300c0a01d:5005076300c4a01d;
  vmhba1:6: 500507630303414 d scsi-qla1-port-6 = 5005076303ffc14d:500507630303414 d;
  vmhba1:7: scsi-qla1-port-7 500507680120b79d = 500507680100b79d:500507680120b79d;
  vmhba1:8: scsi-qla1-port-8 5005076300d0b4a2 = 5005076300c0b4a2:5005076300d0b4a2;
  vmhba1:9: scsi-qla1-port-9 5005076300c30db4 = 5005076300c00db4:5005076300c30db4;
  [root@esx011 /] # vdf h
  Size of filesystem used Avail use % mounted on
  / dev/sda1 3.0 G 2.5 G 364 M 88%.
  / dev/sda3 15G 5.6 G 8.3 G 40% / images
  No 392M 392M 0 0% / dev/shm
  / dev/sda6 23% 424 M 1.4 G 2.0 G/var
  / dev/sda5 7.7 G 81 M 7.2 G 2% /vmadmin
  vmhba0:0:0:1 91 82 G 8.5 G 90% / vmfs / vmhba0:0:0:1
  vmhba0:1:10:1 15 G 15 G 0% 7.0 M / vmfs / vmhba0:1:10:1
  63 7.7 M 63 0% G G vmhba0:1:11:1 / vmfs / vmhba0:1:11:1
  vmhba0:1:1:1 63 63 G 0 100% / vmfs / vmhba0:1:1:1
  vmhba0:1:2:1 15 G 14 G 1.1 G 93% / vmfs / vmhba0:1:2:1
  vmhba0:1:3:1 63 63 G 0 100% / vmfs / vmhba0:1:3:1
  vmhba0:1:4:1 63 63 G 0 100% / vmfs / vmhba0:1:4:1
  vmhba0:1:5:1 15 G 14 G 1.1 G 93% / vmfs / vmhba0:1:5:1
  vmhba0:1:6:1 63 63 G 0 100% / vmfs / vmhba0:1:6:1
  vmhba0:1:7:1 63 63 G 0 100% / vmfs / vmhba0:1:7:1
  vmhba0:1:8:1 15 G 14 G 1.1 G 93% / vmfs / vmhba0:1:8:1
  vmhba0:1:9:1 63 63 G 0 100% / vmfs / vmhba0:1:9:1
  vmhba0:5:0:1 59 G 14 G 44 G 24% / vmfs / vmhba0:5:0:1
  vmhba0:6:3:1 29 G 14 G 14 G 49% / vmfs / vmhba0:6:3:1
  37 G 35 G 1.7 G 95% vmhba0:6:6:1 / vmfs / vmhba0:6:6:1
  vmhba0:7:0:1 499 G 450 G 49 G 90% / vmfs / vmhba0:7:0:1
  7.4 G 7.3 G 180 M 97% vmhba0:9:0:1 / vmfs / vmhba0:9:0:1
  37 G 36 G 1001 M 97% vmhba0:9:1:1 / vmfs / vmhba0:9:1:1
  vmhba0:9:3:1 G 7.4 7.4 G 0 100% / vmfs / vmhba0:9:3:1
  vmhba2:0:0:8 39 G 39 G 29 M 99% / vmfs / vmhba2:0:0:8
  [root@esx011 /] # df h
  Size of filesystem used Avail use % mounted on
  / dev/sda1 3.0 G 2.5 G 364 M 88%.
  / dev/sda3 15G 5.6 G 8.3 G 40% / images
  No 392M 392M 0 0% / dev/shm
  / dev/sda6 23% 424 M 1.4 G 2.0 G/var
  / dev/sda5 7.7 G 81 M 7.2 G 2% /vmadmin
  [root@nbxva011 /] # wwpn.pl
  vmhba0: 210000e08b1a51d3 (Qlogic) 5:4:0
  vmhba1: 210000e08b1a03d1 (Qlogic) 7:3:0
  [root@esx011 /] # cat /etc/lilo.conf
  command prompt
  Timeout = 50
  boot = / dev/sda
  install=/boot/boot.b
  linear
  default = esx

  image=/boot/vmlinuz-2.4.9-e.71smp
  label = linux
  root = / dev/sda1
  initrd=/boot/initrd-2.4.9-e.71smp.img
  read-only

  image=/boot/vmlinuz-2.4.9-e.71
  label = linux-up
  root = / dev/sda1
  initrd=/boot/initrd-2.4.9-e.71.img
  read-only

  image=/boot/vmlinuz-2.4.9-vmnix2
  label = esx
  root = / dev/sda1
  initrd=/boot/initrd-2.4.9-vmnix2.img
  read-only
  Append = "mem = 800M cpci = 0: *;" 1 : * ; 2 : * ; 3 : ; 4:5:0; 7:0; 9 : * ; 10:; 11:; 12: *; 14:; 15: *; 17:; 18: *; 20:; 21: *; 23:; 24: *; 26:; 27: *; 29:; »

  It's client server which I can not restart the server boot or HBA settings view.

  All points will be awarded.

  Thank you

  And in MUI - HBA is not shared with Service Console

• I just bought Adobe Photoshop Elements of Costco.  I was unable to install it from the disc.  Can someone tell me how to proceed?

  I bought Adobe Photoshop 14 at Costco.  I tried to install it from the disc without success.  Can someone help me with this problem?  I can't find anything like the installer.

  Please visit Download Photoshop Elements | 14, 13, 12, 11, 10 for installation.

  Kind regards

  Hervé Khare