Service starts and then stops during the SRM 5.1.1 install

Similar Questions

• The Apple Mobile Device Service service on Local computer started and then stopped.

  My iDevice doesn't connect to iTunes, I think its a result of the apple mobile device service. The restart option doesn't come up, it just says  "start the service" and when I click that an error comes up which says "The Apple Mobile Device Service service on Local Computer started and then stopped. Some services stop automatically if not in use by other services or programs". (I've already got a post with this information on I just wanted to make it more clear)

  If your iOS device does not appear in iTunes, try the following:

  1. Open Control Panel > Device Manager
  2. Plug in your device
  3. Locate Bus USB Controllers > Apple Mobile Device USB Driver.
     It is also possible that the device may appear under imaging devices, portable devices or other devices or as a device USB of MTB.
     
  4. Right-click and select software update of the driver...
  5. Click Browse my computer for driver software
  6. Go to C:\Program Files\Common Apple Mobile Device Support\Drivers or
     C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers
  7. Click on let me pick from a list of drivers for devices on my computer
  8. Click on Apple Mobile Device USB Driver
  9. Click Next, then close and exit the Device Manager

  To step 3 above, open the Device Manager. Expand one of the articles that are listed.

  • USB Bus controllers
  • Imaging devices
  • Portable devices
  • Other devices

  Plug in the appliance. You should hear the telltale Windows sound device connection and a Division must acquire a new entry. This should be your device. It cannot be labelled properly at this point. If you do not hear a suspicious noise cable damaged.

  Or try If iTunes does not your iPad, iPhone or iPod - Apple Support

  If not try a complete tear down and rebuild iTunes in accordance with the resolution of the problems with iTunes for Windows updates.

  Or try to go back to the last version of iTunes that has worked for you. See the programs installation of iTunes to download links. If you roll back to 12.3.3.17 to 12.3.2.35, for example, then you will also need restore the database in the manner described in the empty/corrupted after upgrade/crash iTunes library. The tip makes suggestions to reintroduce recent purchases, so at worst, you lose a few meters or a newly created playlist.

  TT2

• Error - windows search on the local computer started and then stopped. Could not start the Windows Search service.

  Original title: windows search service does not start.

  When I try to start the service "windows search" I get the following error "windows search on local computer started and then stopped. Some services stop automatically if they have no work to do, for example, the services of newspapers and performance alerts' I tried manually and nothing, can someone help me please.
  It is a XP machine and yes I have windows search 4.0. I need help to get that windows search service has restarted.

  I no longer need it, I just backed up all my files and re - install windows XP.

• the service windows defender on local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs.

  the service windows defender on local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs.

  Hello

  read this information on the Defender:

  ·                         If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

  the basics of Microsoft security has its own version of windows defender

  and other anti-virus programs use their own particular type of application to scan for spyware and malware

  It of nothing to worry and is the default action, which is designed for them to do

  If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-service-in-Windows-Server-2008-or-Vista/

  and here is the method to remove it from startup in vista

  http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/

  and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/

       and read this information to microsoft:

  Error message when you run Windows Defender: «Error 0x800106ba»

  http://support.Microsoft.com/kb/931849

  and if you need to change startup programs read this information on the other methods of doing it without using defender

  using msconfig read this tutorial;

  How to use MSCONFIG in Windows Vista

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  and also try this program;

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• Error 711 The Secure Socket Tunneling Protocol Service service on Local computer started and then stopped. ." Unable to connect to the Internet

  Original title: I get error 711 when I try to connect to the internet via a UIM modem on my windows overpriced home 7 SP 1

  Did some research and tried manually from the phone, RACM, RACM auto and plug and play services but got error 1068.Tried to start the service SSTP to solve this problem but got the error "the Service of Protocol Secure Socket Tunneling courier on Local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs. »

  I am so desperate and would appreciate helpful suggestions.

  Hello

  1. When was the last time it worked?

  2 did you a recent software or changes to the material on the computer?

  Method 1:

  I suggest you to go through the steps mentioned in the link and the Coachman.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  If the steps is not enough, go to method 2.

  Method 2:

  Ensure that all dependencies of Service Remote Access Connection Manager components are started and set to automatic

  (a) (a) cliquer click on start-run, type services.msc, the, click OK.

  (b) ensure that the following services are started on and set to automatic.

  (c) make sure that the "Startup Type" says "automatic"and has begun.» If it isn't, use the drop down menu to change (under the general tab).

  (d) if she once said: "Automatic", then click on the "Recovery" tab in the upper part and replace the line "First failure" "Restart the Service", then click on ""apply ', then OK. "

  See also:

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Hope this helps and keep us posted.

• Service server vmware vcenter orchestrator on local computer started and then stopped

  Hello

  I'm unable to start the Server service of vco on Windows 2008 R2 machine. If I try to restart the service it displays the following error;

  "Service server vmware vcenter orchestrator on local computer started and then stopped. "Some services stop automatically when not in use by other services or programs.

  Can someone give me the solution for this?

  Thank you

  Radhika

  First check the configuration of the vCO application and that all green lights. If this isn't the case difficulty what the problem is.

  If everything is green, see the server.log file and look for FATAL / ERROR.

• My gradient does not work.  He worked on an image and then stopped on the next!  I have cs6.  It is just the display of the background gray and white checkerboard on the upper left corner.  I click on the arrow down to see if I can it go back to black and

  He worked on an image and then stopped on the next!  I have cs6.  It is just the display of the background gray and white checkerboard on the upper left corner.  I click on the arrow down to see if I can get it back to black and white and it will not change... it will not change if I click on any of them.  I think it might be a bug?  Any ideas will be appreciated.  I tried to reset them as well.  Thank you!!

  Check your Options bar.  You have the opacity set to 10%.  Easy to do.  Just hit the 1 key while the gradient tool is selected, and it's done. By pressing the 0 key will take you back to 100%

• I downloaded ie9, it does not open. a window opens as it tries to start and then stops (very quickly)

  I downloaded ie9, it does not open. a window opens as it tries and then stops (very quickly) no error messages appear.

  I tried to reinstall, ran a scan for problems, the saved settings. I can still access to safari or chrome.
  I noticed that some other features in windows now do the same thing while trying to open a new window and it does not work. I have vista 32 bit.
  IE9 is showing as a program and all the settings seem ok
  my windows will not install updates?

  Hi Robin,

  Since you are facing problems of opening IE 9 and a few other features in Windows, you can try these steps and see if it helps

  Step 1:

  Check if the problem persists in safe mode with network.

  Start your computer in safe mode

  Step 2:

  If you do not experience the problem in safe mode with networking, you can try to perform a clean boot and see if it helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

  Hope this information is useful.

• Windows m player dia will not play a cd. It starts and then stops and then freezes

  It will play all the music library but not from a cd in my dvd/cd drive. It plays for about 20-30 seconds and then stops, if you click on the screen it faints and freezes.

  Hello

  Could you please answer my questions in the previous post dated September 2?

   

  Also try the following article:

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:

  Back up the registry:

  http://Windows.Microsoft.com/en-my/Windows7/back-up-the-registry

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060

   

  Note: See in particular article regardless of the error message.

• Strategy of diagnosis on Local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs.

  I changed a service journal account accidentally all the time.  It took me a while before I could find a way back to the accepted account, but now it will not start the service.  The Diagnostic Policy Service, which was running before changing services settings, unbootable.  Instead, it gives me the error titled.  The service shows no dependencies needed to start and I tried several different methods of repair.  Can I get an answer as to why this service is not started?

  Hello

   
  Perform the upgrade on the spot of the operating system and check if the problem still persists. Check out the link:
   
  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2
  http://support.Microsoft.com/kb/2255099
   

• Do not get the audit trail for oracle solaris running. It starts and then stops after a few seconds. How can I set up a secure target Oracle Solaris? cure

  I have installation BSM on my solaris 10 Server. I configured BSM to be sent to syslog. I registered my target secure on the server of the AV type Oracle Solaris. Add an audit trail of pointing to the syslog file. The Audit Trail starts and stops after a few seconds. the error I get from the agent log is

  [2014 11-25 T 11: 36:38.647 + 02:00] [collfwk] [ERROR] [] [] [tid: 10] [ecid: 192.169.1.50:11353:1416908198895:0, 0] FVO-8015: initialization of the instanceCollectionController AuditEventCollector error: run: process() Exception. [[

  Instance of Error initializing AuditEventCollector

  at oracle.av.platform.agent.collfwk.impl.controller.CollectionController.initialize(CollectionController.java:322)

  at oracle.av.platform.agent.collfwk.impl.controller.CollectionController.process(CollectionController.java:402)

  at oracle.av.platform.agent.collfwk.impl.controller.CollectionController.run(CollectionController.java:350)

  at java.lang.Thread.run(Thread.java:662)

  Nested exception:

  java.lang.NumberFormatException: for input string: "invalid audit trail: / var/adm."

  at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48)

  at java.lang.Integer.parseInt(Integer.java:449)

  in java.lang.Integer. < init > (Integer.java:660)

  to oracle.av.platform.common.exception.AuditException. < init > (AuditException.java:118)

  to oracle.av.platform.agent.collfwk.AuditEventCollectorException. < init > (AuditEventCollectorException.java:59)

  at com.oracle.solaris.SolarisCollector.initializeCollector(SolarisCollector.java:86)

  at oracle.av.platform.agent.collfwk.impl.controller.CollectionController.initialize(CollectionController.java:316)

  at oracle.av.platform.agent.collfwk.impl.controller.CollectionController.process(CollectionController.java:402)

  at oracle.av.platform.agent.collfwk.impl.controller.CollectionController.run(CollectionController.java:350)

  at java.lang.Thread.run(Thread.java:662)

  ]]

  [2014 11-25 T 11: 47:49.248 + 02:00] [collfwk] [ERROR] [] [] [tid: 11] [ecid: 192.169.1.50:11353:1416908869249:1, 0] FVO-8015: initialization of the instanceCollectionController AuditEventCollector error: run: process() Exception. [[

  Instance of Error initializing AuditEventCollector

  at oracle.av.platform.agent.collfwk.impl.controller.CollectionController.initialize(CollectionController.java:322)

  at oracle.av.platform.agent.collfwk.impl.controller.CollectionController.process(CollectionController.java:402)

  at oracle.av.platform.agent.collfwk.impl.controller.CollectionController.run(CollectionController.java:350)

  at java.lang.Thread.run(Thread.java:662)

  Nested exception:

  java.lang.NumberFormatException: for input string: "invalid audit trail: / var/audit.

  at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48)

  at java.lang.Integer.parseInt(Integer.java:449)

  in java.lang.Integer. < init > (Integer.java:660)

  to oracle.av.platform.common.exception.AuditException. < init > (AuditException.java:118)

  to oracle.av.platform.agent.collfwk.AuditEventCollectorException. < init > (AuditEventCollectorException.java:59)

  at com.oracle.solaris.SolarisCollector.initializeCollector(SolarisCollector.java:86)

  at oracle.av.platform.agent.collfwk.impl.controller.CollectionController.initialize(CollectionController.java:316)

  at oracle.av.platform.agent.collfwk.impl.controller.CollectionController.process(CollectionController.java:402)

  at oracle.av.platform.agent.collfwk.impl.controller.CollectionController.run(CollectionController.java:350)

  at java.lang.Thread.run(Thread.java:662)

  ]]

  Can you please help with instructions/solution implementation of Oracle Solaris secure target? A beginner in Audit Vault.

  I have the installation path for the database and which works very well

  concerning

  Thanks for the pointers. After you add hostname to the location of the trail, the audit trail is running

• "module specified fixmHost.dll not found" error starting and error 0x8007054F during the update to itunes.

  Original title: error messages and the resolution.

  My question is twofold.  First of all, when I start my computer, I get a message that says "fixmHost.dll specified module could not be found.  I tried to restore my computer, running Vista several times, but I still get the message.

  The second question I have is when I tried to download a newer version of Itunes.  This error is a bit more complicated.  It reads "an error occurred during the installation of assembly Microsoft.VC80.CRT, version = 8.0.50727.4053, type = win32, public key token = architectures, processes or the 1fc8b3b9a1e28e3b ="x 86".  See Help and Support.  HRESULT: 0X8007054F.  Someone else has experienced this problem and how they have solved this problem?  Thank you very much.

  Hi nani318,

  DLL files allowing communication between files and devices, so that they obey orders. For example, a DLL under Windows Vista will enable communication between an executable file and a device, such as Microsoft Word and a printer.

  Use the (SFC.exe) System File Checker tool to determine which file is missing and try to recover the missing file.

  SFC scan
  http://support.Microsoft.com/kb/929833

  And issues with Itunes, you can follow the steps below.

  Step 1:

  Download and install Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package ATL Security Update

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=766a6af7-ec73-40ff-B072-9112bab119c2&displaylang=en#Filelist

  Step 2:

  (A) uninstall all software iTunes program and features.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  (B) if that does not completely remove iTunes, you can follow the steps mentioned in the article.

  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7
  http://support.Apple.com/kb/HT1923

  A similar question was considered in the Apple forums.

  http://discussions.Apple.com/message.jspa?MessageID=10526839

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Unknown Publisher box opens, I click run, it starts and then stops, saying "error reading setup initialization file".

  Windows doesn't let me download an application from my library to the city.  It is an application used to download their books. I have Vista Home Premium on my HP Pavilion.

  I start the download, the process begins, and then a small dialog box opens saying "Unknown Publisher" and the choice of 'run' or 'Cancel '.  I chose 'run', it seems it will continue then a little screen pops up saying "error reading setup initialization file."  I "ve never had no problem download at this point.

  For the same problem, I tried the following and still no luck:

  I've got "pop-up blocker" turned off.
  I disabled the "Inprivate filtering",
  I turned off my "firewall" temprarily

  Any other suggestions for this problem?
  Thanks for your help!
  Winifred_M

  Hi Winifred_M,

  Thanks for posting on the Forum of answers.

  If you can provide a link to the application, we can try to recreate the issue.
  Otherwise, it is perhaps a question that you should take with the Publisher of the software.

  However, you can try to use the Windows Installer CleanUp utility:

  When you are working on your computer and install a new program, the installation suddenly fails. Now, you're left with a partly installed program. You try to install the program again, but you're unsuccessful. Or, maybe you have problems trying to remove an old program because the installation files are damaged.

  Do not worry. Windows Installer CleanUp Utility may be able to help. You can use the utility to remove installation information for programs that were installed by using Windows Installer. Remember that Windows Installer CleanUp Utility does not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall on.

  Download the Windows Installer CleanUp utility

  We have updated Windows Installer CleanUp Utility. This version of the Windows Installer CleanUp utility works correctly in all versions, 32-bit and 64-bit Microsoft Windows. If you have an earlier version installed on your computer, we recommend that you download and install this latest version.

  You must be logged on to Windows with a user account is an administrator on the computer to run Windows Installer CleanUp Utility. For more information about how to install and run Windows Installer CleanUp Utility, see the section "more information".

  You can download Windows Install CleanUp Utility starting from Microsoft Download Center:

  Download the Windows Installer Cleanup Utility package now.
  (http://download.microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe)

  Copied from http://support.microsoft.com/kb/290301

  Please let us know if that helps.
  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• If I did sign up for 10 free images and download 8 images and then cancel during the first month, can specify you what would be the cost? w

  If I sign u, download 8 images but subsequently cancel the membership in the first month.

  can clarify you what the cost would be, thanks

  Hello

  If you subscribe to the offer of 10 images/month promo you will be charged the price displayed and then receive a refund for that amount.

  If you cancel within the 1st month then there will be no other load.

  Link to the promo - Royalty free images, pictures and graphics. Adobe Stock

  Thank you

  Bev

• Why does say lightroom has encountered an error when reading the preview cache and need to stop smoking? (Lightroom will attempt to solve this problem, the next time it starts) and then stops?

  

  Your catalog is stored on the hard drive.

  By default, it is stored in Pictures\Lightroom

  You must browse to folder Pictures\Lightroom via File Explorer and delete the Previews.lrdata folder.