Services enabled/disabled by default on the router?

Similar Questions

• New Internet Service, do I need to reset the router E2500?

  I had used temporarily my router E2500 to work with a wireless broadband source by connecting it to a Cradlepoint CTR500.

  Now I will connect the E2500 to run (and ongoing) with Time Warner Roadrunner using a modem cable Scientific Atlanta WebSTAR DCP 2100. Given that I'm changing the source of the internet, do I need to reset the E2500 to factury default values, and then perform a new installation using the Cisco Connect software?

  The cable modem is currenlty connected via an ethernet straight cable to the PC. I had read that remove the ethernet connection and the cable from the cable modem and the modem powered off for 10 minutes will cause the modem to "forget" the PC's MAC address.  Once connect it MAC address of the PC had been "forgotten", the ethernet cable from the modem to the router, which make the modem pick up the router's MAC address and eliminate the need to clone the MAC address of the PC. Does this sound correct?

  Unplug the power to the modem cable for 30 seconds should be good enough. In regards to the router, you should be able to get without a reset, if it is set to DHCP for the type of internet connection.

• Firewall settings is enabled, disabled and cannot open the Web page in Internet Explorer: "IE can not display the webpage".

  Original title: how to manually configure the firewall?

  Let me know how I can configure my firewall setting manually as it is said that your firewall setting is disabled. I have HomeXP, SP3. I am now faced with another problem with IE8 when I try to open another page, I find this error-"IE can not display the webpage". Sometimes, it works when it is updated and not some time.

  Hello

  1. do you use third-party security software that runs on the computer firewall settings?
  2. What is the error code / message displayed when trying to turn on the Windows Firewall?
  Please follow these steps in the KB article to turn on the Windows Firewall.
  Step 1
  How can I turn on or turn off the firewall in Windows XP Service Pack 2 or later versions?
  http://support.Microsoft.com/kb/283673
  Step 2
  How to enable Internet Connection Firewall in Windows XP
  http://TechNet.Microsoft.com/en-us/library/bb456986.aspx
  Follow the steps in order and read the content.
  See also,
  
  "Internet Explorer cannot display the webpage" error in Internet Explorer
  
  http://support.Microsoft.com/kb/956196

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  
  I hope this helps.

• Enable/disable printing on all the elements containing the password?

  I have a form with subforms and parts that are set to only appear on the screen.   I want some people to be able to print the complete PDF without Acrobat.  Can I have a field that toggles all the objects to printable toggle based on a password?

  Thank you.

  Tom

  Hi Tom,

  Yes, you should be able to achiew this. If you have a checkbox, you have a checkbox with a response to the click event method:

  var nResponse = xfa.host.response("Please enter your password to print the whole form", "Print settings", "", 1); 
  
  if (this.rawValue == 1 && nResponse == "1234") {
       Subform1.relevant = "";
       Subform1.presence = "visible";
  }
  else {
       Subform1.presence = "visible";
       Subform1.relevant = "-print";
  }
  

  You can see the method of response in action here: http://assure.ly/yDtfsM and the method of presence / relevant here: http://assure.ly/h7whb8.

  Good luck

  Niall

• The service user profile Service could not connect to view the user profile cannot be loaded. I loaded Microsoft updates and can not connect on my windows7 starter system. __

  I can not connect to.  Software Microsoft gets Ths user profile Service Service has no connection user profile cannot be loaded.

  Hello

  References to Vista also apply to Windows 7.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. Safe Mode ADMINISTRATOR account has no password by default (unless someone has changed the password so it should be available).

  Some programs such as the Google Updater (if you added the toolbar Google, Chrome or Google Earth) has been known to cause this problem.

  Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
  http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have logged on with a temporary profile. "in Vista & Windows 7.
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with the same password (or two with the same password) to use a test or fix the other.

  You can run the Admin account hidden from the prompt by if necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  If you cannot access your old account, you can still use an Admin to migrate to another (remember to always leave an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" and="" devices="" for="" it :="" bicycle="" -="" mark="" twain="" said="" it="">

• Error different when GPS location service is disabled

  Hello

  I wear my android app to BB10 is vased location services. So when I disable location services in android it gives me the error message like this: "the phone GPS must be enabled" and likewise I turn off location services in BB10 it gives me the error message like: "lead-time of the GPS position.

  So, what is in question in the present?

  The problem is that the Android location provider enabled / disabled does not match the OS Settings.  So if it enabled in Android, but disabled in the operating system, Android assume should be able to access these data.  It can not.

  This is a bug / control setting that activating / disabling the setting is not turn the Android operating system.

  Edit: The development team knows about this problem and a solution is being developed for a future version.

• How to solve - LIBTUX_CAT:4053: ERROR: failure of the routing function - error?

  Hello
  
  We use TUX 8.1 and I get the error:
  
  LIBTUX_CAT:4053: ERROR: function of routing failed
  
  citing a tpforward call.
  
  My UBB for the new service is below.
  
  'NewXXInqu '.
  LOAD = 50 PRIO = 50
  BUFTYPE = "ALL".
  ROUTING = 'PARTITION
  TRANTIME = 90
  TRANSCENDING = N
  
  BY DEFAULT: LOAD = 50 PRIO = 50 BUFTYPE = 'ALL' TRANSCENDING = N
  * ROUTING
  'PARTITION
  FIELD = "ID_PARTITION."
  BUFTYPE = "FML32.
  WILL = «1:P1, 2:P2»
  
  Sound also to give the error: GP_CAT:1064: ERROR: field 'NewXXInqu' null routing
  LIBTUX_CAT:1401: WARN: failure of tpacall tpforward TPESYSTEM - internal system error
  
  I have the file object created NewXXInqu, which is related to NewXXSvr. This NewXXSvr server is up and running and I can see that using ps - ef.
  
  can you please tell me what is missing this im here. What does routing field null 'xx' mean?
  
  Even if I call my new service directly, it gives the same error: GP_CAT:1064: ERROR: routing field for 'xxx' null.
  LIBTUX_CAT:4053: ERROR: function of routing failed.
  
  Appreciate your response,
  Thank you
  Gopi.

  Hey Gopi,

  The routing criterion you set requires that the being sent to the FML32 buffer must contain field id_partition. If it does not contain this field, Tuxedo does not know how to route the request. You could add a routing by default for the routing criterion, but I suspect that will hide just everything that is the real problem. As I mentioned in response to your other post, try to print on with Fprint32() FML32 buffer before calling the service and checking that the field is present.

  Another thought, since it occurs in a TPFORWARD application, make sure that the server that makes the TPFORWARD has access to the field table that defines the id_partition. If the transfer server does not well-positioned FML32 field table environment variables, Tuxedo cannot find PARTION_ID to determine if the field is present in the buffer or not.

  Kind regards
  Todd little
  Chief Architect of Oracle Tuxedo

• wusb54gcv3 cannot find the router

  My computer is unable to detect the router.  I have the router works on 2 different computer.  I inserted the card and the program provided wouldn't load.  Windows find a driver and installed the adapter.  However, it cannot detect the wireless network.  I just reinstalled XP on a new drive so there is no update. Any help would be appreciated.

  Thanks for your suggestion.  It is difficult to update anything online when you can not get the internet service because you do not find the router.

  However I knew that the problem was with the fact that necessary XP service pack 2 downloaded so that the adapter to work.  Moved to my computer and connected to the direct ADSL line downloaded sp2 then the adapter while traveling.

• Can ping the router and the computers to the network, but not beyond router

  I have 2 computers in linux and 3 Windows XP computers.  All can ping the router and inside my network.  Anyone can browse the internet.  None can ping outside my network (google.com or its IP address) if connected directly via the switch or router.  Traceroute shows stopping at the router.  Router firewall is disabled.  Ping on the router tool not working anymore. Linksys WRT54G Router is and I've just updated to firmware 4.21.1 but the old firmware is has never worked. I use 192.168.1.1 for the router.  Linux has some IP fixed all the other usind DHCP.  ISP is a provider of mobile phone to the modem.  Just like cable or DSL, I guess.  I've looked everywhere with no solutions.  Anyone have any ideas?

  Yes, contact your ISP to get it resolved.

• [feature request] disable by default by this action for this site for all PDFs "remember."

  

  This option should be disabled by default on all versions of the reader. This is a problem of security major if a possible link in the pdf file redirects to a malicious Web site.

  the user MUST have the ability to control this behavior.

  to make this option disabled by default in the next version!

  Feature requests/bug reports have a much better chance to receive attention if posted here: feature request/Bug Report Form

• East-redirection of possible connection when the routing service is disabled?

  Possible when connection redirection is the routing service is disabled in win7? I find that this is the case on the following resource monitor. It comes to my ISP. They can redirect my connection like that?

  Hello Newman,

  Thank you for your response.

  I would like to inform you that if any Internet Service provider changes of place, it's legal and it does not affect Internet connectivity.

  Please let us know if you need more help.

  Thank you

• Cannot enable the firewall service in Windows Vista. Prevents the installation of the HP printer software.

  I'm trying to install the HP printing software, but the error message that the firewall must be enabled. However, I'm unable to turn on the firewall. The sytem keeps taking me in circels telling me I can '; t activate the firewall because the service is disabled.

  Anyone have this experience? Suggestions to solve? Thank you!!

  PS: I use VISTA w/SP2
  

  Hello

  How to turn on the firewall enabled or disabled in Vista Windows
  http://www.Vistax64.com/tutorials/92697-Windows-Firewall-off.html

  Check dependencies and their dependencies here:

  http://www.blackviper.com/WinVista/services/Windows_Firewall.htm

  For Services

  Start - type in the search box-> find Services at top - right click - RUN AS ADMIN

  (Means that you can right-click on the command prompt and RUN AS ADMIN).

  ---------------------------------------------------------

  Some antivirus/security products may cause this error. McAfee, Norton, Windows Live OneCare.
  ThreatFire are some. What antivirus/antispyware/security products you have on machine now. And
  who have you ever on it, even if you have uninstalled them. (These leave the remains that can cause some)
  strange questions.)

  Check the default services and dependencies to ensure that they are running.
  http://www.blackviper.com/WinVista/services/Security_Center.htm

  Security Center not related anti-virus or firewall State correctlyhttp://www.winhelponline.com/blog/security-center-not-reporting-anti-virus-or-firewall-status-correctly/

  How to fix Vista Reporting incorrect information Security Center
  http://www.Vistax64.com/tutorials/195736-Security-Center-not-reporting-correct-information.html

  How to disable or enable the Security Center in Vista
  http://www.Vistax64.com/tutorials/67737-Security-Center.html

  This thread might help as it might be a permissions problem.
  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/3d2049ae-4581-439b-8E15-3f603f5c60f0/

  =====================================

  Also check with HP support and forums.

  HP support
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.
  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I keep getting these messages at the bottom of my screen. "" Intranet settings are disabled by default "do not show this message.

  Original title: Intranet or Internet

  I keep getting these messages at the bottom of my screen. "" Intranet settings are disabled by default "do not show this message.
  "Enable intranet setting." This setting is necessary or can I get rid of it?  If it is disabled, which is not enough say?

  Hello

  1. you receive the error while browsing?

  2. you use Internet Explorer browser to surf the internet? If so, which version?

  See the following article:

  Changing intranet security settings:

  http://Windows.Microsoft.com/en-us/Windows-Vista/changing-intranet-security-settings

• How to enable and disable, copy or rename the rules via the groovy script?

  A client, we received this question:

  How to enable and disable, copy or rename the rules via the groovy script?

  Foglight 5.7.5

  Hello

  There is this example of support KB

  support.Software.Dell.com/.../99059

  and there is also documentation of Service layer of the administration on the RuleService console.

  Best regards

  Golan

• Hello! A few days ago, I, disabled Photoshop subscription (CC of Lightroom and Photoshop CC) Act in accordance with your instructions, I have not be enabled. Please help solve the problem.

  Hello! A few days ago, I, disabled Photoshop subscription (CC of Lightroom and Photoshop CC) Act in accordance with your instructions, I have not be enabled. Please help solve the problem?

  Contact support - for the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )