Services of missing financial reports?

Similar Questions

• Shared Services with the Financial Reporting - 11.1.1.3 security problem

  Hello
  
  So we have some users are configured in some groups. These groups have access to the Essbase server and Scheduler application access. This worked very well. They have access to the app and they access the cube through Smartview.
  
  Now, we need them to be able to see all the financial reports (EN) created for this application. There are so many choices of configuration under 'Reporting and analysis', I don't know how to do this correctly. At this moment we must affect access 'Viewer' and 'Explorer' under 'Content Manager' tree so that to happen. I just think it sounds wrong. We just need the user to be able to run and view a report of the workspace.
  
  Any help is appreciated as it is a very green to me area.

  Hello

  You don't need to give them a "Content Manager", that gives write access to your content uses, unless you have blocked a file using "access forbidden".
  You need to remove the content of reports of records manager / individual in the workspace browser, right-click and select, then click on "change permissions".
  Here, you will give them "read access". In addition, give them access to reports based on needs and not overall access.

  Let me know if you have the questions more.

  See you soon
  RS

• Problem in opening up financial reports from the workspace using a normal user id

  Hello
  
  We have recently migrated from version 9.3.1 (32-bit) to Oracle EPM 11.1.1.3 version (64-bit) and have a major problem with financial reports:
  
  * User who is configured as an administrator for the purpose of planning or reporting and analysis administrator can access a financial report to the workspace without any problem.
  
  * a normal user who is configured as a viewer, Explorer, analyst, editor of personal settings (under reporting and analysis) can see the POV and NOT the report. The report is just empty.
  
  * If a group (say A) is assigned 'administrator reporting and analysis' and 'Request for trust' and a normal user is assigned to this group, the user can then access the financial report with no problems. But we don't want to do coz:
  
  The normal user gets access to access shared services
  The user also gets see all other records and reports in the workspace to which he has no access to. The reports that are not in its right of access using the incorrect data gives.
  If the reports and analysis administrator privilege is removed from Group A and NOT 'Trusted Application', existing users in the group can still see the reports to which they have access to (with other documents to which they do not have access to). But if a new user is created from scratch and added to this group, it gets again a report empty with POV.
  
  
  Please let me know if anyone has experienced this problem and found a work around.
  
  
  Thanks in advance!
  
  
  Here is our environment.
  
  *****************************************************************
  The Oracle EPM system has been downloaded oracle delivery Web site
  * Oracle Enterprise Performance Management (11.1.1.3.0) Media Pack for Microsoft Windows x 64 (64-bit)
  
  Environment of the EPM system is as follows:
  A server:
  Shared services, planning, workspace, web, calculation of financial information manager application
  
  ServerB:
  Essbase server, Essbase Administration services, provider services
  
  C Server
  Financial reports, Webanalysis

  It drove me crazy. The minimum amount of access I could give users was Bishop content rights so that they are able to run the reports.

  I connected it with Oracle and they finally gave me with the solution.
  Bug # if you are interested is 8991596, but I think it is unprecedented.

  WARNING: I highly recommend that you talk with support and mention this bug number before executing this SQL.
  This code worked for me and I don't have problems after running it but I ran this on a first test environment. I accepts no responsibility if your environment explodes etc etc!

  See you soon,.
  Gee

  # 1. Run the following SQL to display the internal records.
  # "Show hidden objects" must also be enabled in Explorer to display the folder.

  update of v8_container the internal value = 1 where parent_folder_uuid = "HRINTERNALFOLD" or container_uuid = "HRINTERNALFOLD".

  # 2. Remove all files in the folder "HRInternal" from the Explorer.
  # Do not delete the HRInternal folder!

  # 3. run the following SQL to reset the folder "internal".
  update the internal value = 0 v8_container where container_uuid = 'HRINTERNALFOLD. '

  # 4. Run the following SQL to recreate the folders with access to the global group

  INSERT INTO V8_CONTAINER (CONTAINER_UUID,META_TYPE_UUID,PARENT_FOLDER_UUID,NAME,CREATION_DATE,EXPIRATION_DATE,DESCRIPTION,CLASSNAME,BROWSABLE,AUTO_DELETE,CASCADE_DELETE,DELETED,SUPERCLASS,USER_ATTR_FLAG,USER_NAME,GROUP_NAME,PUB_RATING,IS_INLINED,OCOL_METATYPE_UUID,LAST_MODIFIED_DATE,CAN_HAVE_EXCEPT,INTERNAL, OWNER_LOGIN, IS_FOLDER ) VALUES ('USERPOVFOLD','ID03','HRINTERNALFOLD','UserPov',NULL,NULL,NULL,'com.sqribe.transformer.Folder',0,0,0,0 ' com.sqribe.transformer.Folder' (, 0, 'administrator', 'world', 0,0,NULL,NULL,0,1, 'administrator', 0)

  INSERT INTO V8_CONT_VERSION (CONTAINER_UUID, VERSION_NUMBER CREATION_DATE, LAST_MODIFIED_DATE, FILE_SIZE, CLIENT_FILE_NAME, HAS_EXCEPTION) VALUES ('USERPOVFOLD', 1, NULL, NULL, NULL, NULL, 0)

  INSERT INTO V8_FOLDER (CONTAINER_UUID, VERSION_NUMBER, FOLDER_FULL_PATH) VALUES ('USERPOVFOLD', 1, '\HRInternal\UserPov')

  INSERT INTO V8_FOLDER_TREE (FOLDER_UUID, ANCESTOR_UUID) VALUES ('USERPOVFOLD', 'USERPOVFOLD')

  INSERT INTO V8_FOLDER_TREE (FOLDER_UUID, ANCESTOR_UUID) VALUES ('USERPOVFOLD', 'HRINTERNALFOLD')

  INSERT INTO V8_CONTAINER (CONTAINER_UUID,META_TYPE_UUID,PARENT_FOLDER_UUID,NAME,CREATION_DATE,EXPIRATION_DATE,DESCRIPTION,CLASSNAME,BROWSABLE,AUTO_DELETE,CASCADE_DELETE,DELETED,SUPERCLASS,USER_ATTR_FLAG,USER_NAME,GROUP_NAME,PUB_RATING,IS_INLINED,OCOL_METATYPE_UUID,LAST_MODIFIED_DATE,CAN_HAVE_EXCEPT,INTERNAL, OWNER_LOGIN, IS_FOLDER ) VALUES ('DATASOURCESFOLD','ID03','HRINTERNALFOLD','DataSources',NULL,NULL,NULL,'com.sqribe.transformer.Folder',0,0,0,0 ' com.sqribe.transformer.Folder' (, 0, 'administrator', 'world', 0,0,NULL,NULL,0,1, 'administrator', 0)

  INSERT INTO V8_CONT_VERSION (CONTAINER_UUID, VERSION_NUMBER CREATION_DATE, LAST_MODIFIED_DATE, FILE_SIZE, CLIENT_FILE_NAME, HAS_EXCEPTION) VALUES ('DATASOURCESFOLD', 1, NULL, NULL, NULL, NULL, 0)

  INSERT INTO V8_FOLDER (CONTAINER_UUID, VERSION_NUMBER, FOLDER_FULL_PATH) VALUES ('DATASOURCESFOLD', 1, '\HRInternal\DataSources')

  INSERT INTO V8_FOLDER_TREE (FOLDER_UUID, ANCESTOR_UUID) VALUES ('DATASOURCESFOLD', 'DATASOURCESFOLD')

  INSERT INTO V8_FOLDER_TREE (FOLDER_UUID, ANCESTOR_UUID) VALUES ('DATASOURCESFOLD', 'HRINTERNALFOLD')

  INSERT INTO V8_CONTAINER (CONTAINER_UUID,META_TYPE_UUID,PARENT_FOLDER_UUID,NAME,CREATION_DATE,EXPIRATION_DATE,DESCRIPTION,CLASSNAME,BROWSABLE,AUTO_DELETE,CASCADE_DELETE,DELETED,SUPERCLASS,USER_ATTR_FLAG,USER_NAME,GROUP_NAME,PUB_RATING,IS_INLINED,OCOL_METATYPE_UUID,LAST_MODIFIED_DATE,CAN_HAVE_EXCEPT,INTERNAL, OWNER_LOGIN, IS_FOLDER ) VALUES ('HRSCHEDULERFOLD','ID03','HRINTERNALFOLD','DataSources',NULL,NULL,NULL,'com.sqribe.transformer.Folder',0,0,0,0 ' com.sqribe.transformer.Folder' (, 0, 'administrator', 'world', 0,0,NULL,NULL,0,1, 'administrator', 0)

  INSERT INTO V8_CONT_VERSION (CONTAINER_UUID, VERSION_NUMBER CREATION_DATE, LAST_MODIFIED_DATE, FILE_SIZE, CLIENT_FILE_NAME, HAS_EXCEPTION) VALUES ('HRSCHEDULERFOLD', 1, NULL, NULL, NULL, NULL, 0)

  INSERT INTO V8_FOLDER (CONTAINER_UUID, VERSION_NUMBER, FOLDER_FULL_PATH) VALUES ('HRSCHEDULERFOLD', 1, '\HRInternal\DataSources')

  INSERT INTO V8_FOLDER_TREE (FOLDER_UUID, ANCESTOR_UUID) VALUES ('HRSCHEDULERFOLD', 'HRSCHEDULERFOLD')

  INSERT INTO V8_FOLDER_TREE (FOLDER_UUID, ANCESTOR_UUID) VALUES ('HRSCHEDULERFOLD', 'HRINTERNALFOLD')

  -Give full control access to the UserPov of human resources to the global group
  insert into V8_ACCESS_CTRL (id_ressource, ACCESSOR_ID, ACCESSOR_TYPE, GRANT_ID, GRANT_TYPE) VALUES ('USERPOVFOLD', "0ad72237 - c 008 - 0d 59-000000e4d26d0c20", 2, "0ad72262-0000 - 0 has 78-000000e9583bf0f0", 1).

  HRInternal - dummy record owner
  insert into V8_RESOURCE_OWNER (id_ressource, OWNER_ID, TYPE_ID) VALUES ('USERPOVFOLD', ' 00000000-0000-0000-0000000000000000', "0ad72298-0000-0ccc-000000e750dc47f8")

  -Give full control access to the data directory of human resources for the global group
  insert into V8_ACCESS_CTRL (id_ressource, ACCESSOR_ID, ACCESSOR_TYPE, GRANT_ID, GRANT_TYPE) VALUES ('DATASOURCESFOLD', "0ad72237 - c 008 - 0d 59-000000e4d26d0c20", 2, "0ad72262-0000 - 0 has 78-000000e9583bf0f0", 1).

  HRInternal - dummy record owner
  insert into V8_RESOURCE_OWNER (id_ressource, OWNER_ID, TYPE_ID) VALUES ('DATASOURCESFOLD', ' 00000000-0000-0000-0000000000000000', "0ad72298-0000-0ccc-000000e750dc47f8")

  -Give full control access to the HR planner record for World Group
  insert into V8_ACCESS_CTRL (id_ressource, ACCESSOR_ID, ACCESSOR_TYPE, GRANT_ID, GRANT_TYPE) VALUES ('HRSCHEDULERFOLD', "0ad72237 - c 008 - 0d 59-000000e4d26d0c20", 2, "0ad72262-0000 - 0 has 78-000000e9583bf0f0", 1).

  HRInternal - dummy record owner
  insert into V8_RESOURCE_OWNER (id_ressource, OWNER_ID, TYPE_ID) VALUES ('HRSCHEDULERFOLD', ' 00000000-0000-0000-0000000000000000', "0ad72298-0000-0ccc-000000e750dc47f8")

• Hyperion Financial Reporting-Print Service is not running - put 11.1.2.1

  We use the Hyperion 11.1.2.1 and when I look at my Hyperion Financial Reporting-Print service, it shows me to stop and when I right click to stop/start it the options are grayed out.

  I completely stopped all services of hyperion and them began and now the HFR print service shows me as departure.

  Kindly help me what should I do to solve this problem.

  Hello

  There should be a newspaper available that can give more indication to this problem, not being is not able to connect to the web server en is one of the common issues.
  \FinancialReportingStudio\diagnostics\logs\FinancialReporting\FRPrintLogging.log

  try running the FRRemovePrintServer.cmd the Hyperion Financial reporting - Print serivce deleted successfully and run FRSetupPrintServer.cmd to add

  check if it is releated to the firewall. Make sure that the ports are open.

  Thank you

  ~ KKT ~.

• Financial Reporting Studio should be uninstalled before to patch?

  Hi guys,.
  
  Move forward on my plan to patch, I'm stuck again, this time with the ambiguity in the documentation. I am applying the financial report Patch 13997553. Browsing through the documentation, I found two ambiguous statements. In step 2, the doc said that I need to uninstall EN studio (doesn't say which machine I need to uninstall). Later in step9, it says, on Machines EN studio, uninstall the FR. studio
  
  According to my hypothesis, in step 2, I uninstall it from the server and in Step9 I need to uninstall it from my local computer. But the document never mentioned re - install the EN studio on the server. What I'm missing here?
  
  Help appreciated. Thank you!
  
  
  
  Here is part of the Readme that has me confused.
  
  
  
  
  
  _ APPLY THE FIX
  
  The section contains important information on the application of this patch for Oracle Hyperion Financial Reporting, edition of Fusion.
  
  To apply this hotfix:
  
  1. stop all services and servlet instances related to the installation of Oracle Hyperion EPM Release 11.1.2.2.00.
  
  2 Uninstall Studio Financial Reporting by going to control panel, add / remove programs and then uninstall Financial Reporting Studio. *.
  
  3. on the financial report server computers; Download and unzip the downloaded patch, < PATCH FILE NAME > .zip, for the < EPM_ORACLE_HOME > / OPatch directory (by default, Oracle, Middleware, EPMSystem11R1, OPatch).
  
  NOTE: < NAME OF THE PATCH FILE > .zip is the name that My Oracle Support assigns to this patch. When you download the file, a message indicates the name of the file.
  
  4. on machines of financial reports, a command line server, navigate to the < EPM_ORACLE_HOME > / OPatch.
  
  5. to apply the patch, type the following command on a single line:
  
  
  
  Windows:
  
  opatch.bat applies /OPatch/ < EPM_ORACLE_HOME > < PATCH DIRECTORY > - oh < EPM_ORACLE_HOME >
  
  JDK - < MIDDLEWARE_HOME > / jdk160_29
  
  NOTE: The default value for < EPM_ORACLE_HOME > is C:, Oracle, Middleware, EPMSystem11R1. < MIDDLEWARE_HOME > by default is C:/Oracle/Middleware.
  
  UNIX/Linux:
  
  . / opatch apply /OPatch/ < EPM_ORACLE_HOME > < PATCH DIRECTORY > - oh < EPM_ORACLE_HOME > - < MIDDLEWARE_HOME > jdk / jdk160_29 - invPtrLoc < EPM_ORACLE_HOME > oraInst.loc
  
  NOTE: The default value for < EPM_ORACLE_HOME > is $HOME, Oracle, Middleware, EPMSystem11R1. The default value for < MIDDLEWARE_HOME > is $HOME/Oracle/Middleware.
  
  6 remove the financial reports precompiled jsp files located at: < ORACLE_HOME > \Middleware\user_projects\domains\EPMSystem\precompiled\hr
  
  7 restart servlets and services Oracle Hyperion EPM.
  
  8. all users must now clear files cached in their browser.
  
  "For WebSphere deployments, you must use EPM System Configurator to redeploy the Web application."
  
  9 on Financial Reporting Studio machines; Uninstall the Studio Financial Reporting by going to control panel, add / remove programs and then uninstall Financial Reporting Studio. *
  
  10. connect machine EMP workspace that has been patched to step 3. Download the financial setup of Studio of Reporting in the EPM Workspace menu: on the Tools menu, select install, and then select Financial Reporting Studio and then run the installer. Follow the installation guide to install the Studio Financial Reporting to the desired location.
  
  11. all users must now clear files cached in their browser.

  Are you able to install the Studio on another computer, the executable file are also contained in the patch of \13997553\files\products\financialreporting\install\bin to the right

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Cannot install updates due to error code 0 x 80246008 and the BITS service is missing from the XP computer.

  Recently, I reloaded a fresh load XP on my laptop.  I was able to install SP3 and IE8, despite not being able to download them directly from the Windows Update site.  I tried several times to install updates, one, five and all at the same time and is unable to install.  I ran Fixit to many times and it says it solves some problems, but no single instance doesn't solve all of them.  I also tried to update after the launch of a clean boot, always to nothing does not.  I see many solutions on this and other Microsoft sites and I tried, but nothing seems to change the results.  FixIt has reported the following:

  -------------------------------------------------------------------------------------------------------------------------------------

  Details of the update of Windows editor

  Problems found
  Registration for the service is missing or corruptService registration is missing or damaged do not fixed
  Sign up for the service Reset Succeeded
   
  Problems installing recent updatesProblems recent updates installation not fixed
  Fix Windows Update succeeded
   
  Problems installing recent updatesProblems recent updates installation not fixed
  Fix Windows Update succeeded
   
  Check verrouillesfichiers missing or damaged missing or corrupt files fixed
  Repair missing or corrupt files Succeeded
   
  Windows Update, error 0x8024402C (2013-11-28-T-09_56_27A) 0x8024402C(2013-11-28-T-09_56_27A) of fixed Windows Update error
  Reset Windows Update of the data store Succeeded
   
  Verified issues
  Environment variables Windows Update are of incorrect update environment variable incorrectWindows Checked
  Some security settings are missing or have been changedSome security settings are missing or changed Checked
  Key of registry corrupt Patch registry Patch keysCorrupt
  Detects the hotfix or corrupt cache Checked
  Windows Update services aren't runningWindows update services do not run checked
  Encryption services components are not the registeredCryptographic service components are not registered Checked

  Problems found details

  Registration for the service is missing or damaged do not fixed
   
  Sign up for the service Reset Succeeded
   
   
  Recent updates installation problems not fixed
   
  Fix Windows Update succeeded
   
   
  Recent updates installation problems not fixed
   
  Fix Windows Update succeeded

  Check missing or corrupt files fixed
   
  Repair missing or corrupt files Succeeded
   
   
  Windows Update error 0x8024402C(2013-11-28-T-09_56_27A) fixed
   
  Reset Windows Update of the data store Succeeded

  Issues checked the details of the detection

  6 environment variables Windows Update are incorrect Checked
   
  Restore the Windows Update environment variables is not running
   
   
  Some security settings are missing or changed Checked
   
  Reset the security settings is not running
   
   
  Key of registry corrupt Patch Checked
   
  Detects the cache fix corrupted or missing
  Fix registry patch not working
   
  Fix registry patch problems
   
  Windows Update services do not run checked
   
  Required for Windows Update registry files works not
   
   
  Encryption services components are not registered Checked
   
  Save the cryptographic components not working

  Details of detection

  The service status

  ---------------------------------------------------------------------------------------------------------------

  Can someone point me in the right direction to solve this problem?

  Thank you.

  Original title: Windows Update will not install on the new load XP

  Hi all

  Thanks for your replies.  Sorry I didn't answer sooner, but he got late last night, and I got to reregister the Qmgr.dll and Qmgrprxy.dll BITS files.

  I clicked Start, click on run and typed the command following, and then click OK:

  Start, run and in the run box, Type regsvr32 qmgr.dll, click OK.
  Start, run and in the run box, Type regsvr32 qmgrprxy.dll, click OK.

  I was then able to start the updates.  There are 124 updates, the Microsoft .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update for versions of .NET 2.0 to 3.5 (KB951847) x 86.  He downloaded 124 updates, but even once asked me to insert the disc for qmgr.dll when he was installing the 10th update.  I find the qmgr.dll file again and pressed OK, but it seems to hang forever and do nothing, then I simply cancelled updates and closed during the night.  I have been relieved to have solved the problem of BITS, but is concerned by the hang up on the tenth update installation and he called again for the qmgr.dll file during the installation of updates.

  This morning, when I rebooted, it installed some updates at startup, and I restarted again.  He then held I first install the .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update for versions of .NET 2.0 to 3.5 (KB951847) x 86 to date.  N BITS issue for that.  It took time, but completed settle.  Restart again and now there are only 21 updates to high priority required.  My guess is that he downloaded all 124 updates last night, but when I cancelled the installation after hanging on #10, he just started to install it again this morning and did so successfully.

  However, when I try to install the 21 remaining, he has not once again, and I find that the BITS service is not in the services again.  After I have re-enter the BITS service and restart it, the downloads are working again.

  I am now what I may need to reinsert and restart the BITS service whenever I need to download an update.

  Ideas, suggestions or comments?  I am slowly solve problems and if I persist, I can get this all taken care.

  Hi Dan,.

  From what you wrote, I understand where you are getting confused. Here are the steps to follow to solve this problem.

  Open the Windows search tool, copy / paste the following text, and then click Search: qmgr.dll

  Research should show this file in the following locations:

  C:\Windows\System32
  C:\WINDOWS\ServicePackFiles\i386
  C:\WINDOWS\system32\bits

  I hope they are all present, follow these steps to register the service.

  Click on start, run and copy/paste: regsvr32 qmgr.dll and click OK
  (If you do not have the command run in the start menu, hit the Windows key + R, instead)

  Do the same with this file: regsvr32 qmgrprxy.dll and then restart.

  Here are the next steps.

  Copy / paste this command in the field to run, and then click OK
  %windir%\System32\rundll32.exe setupapi, InstallHinfSection DefaultInstall 132 %windir%\inf\qmgr.inf

  Windows will launch a dialog box asking you to insert the Windows installation CD. Ignore this and change the way downstairs to C:\WINDOWS\ServicePackFiles\i386

  The reason to change the path to the i386 folder is that the files that are there are newer than those on the Windows installation CD.

  Then restart the PC again and continue with the rest of the troubleshooting steps.

  Click on start, run and copy/paste the following and click OK: services.msc

  You should now be able to see the Background Intelligent Transfer Service, or just "BITS" displayed in the list of Services.

  Double click it to open BITS and then click on the Start button. This is just a test to make sure that it works correctly.

  If you get 2 error: cannot find the specified file, click on start, then run again and copy / paste the following command, and then click OK:
  Tracking Add HKLM\SYSTEM\CurrentControlSet\Services\BITS\Parameters /v ServiceDll /t REG_EXPAND_SZ /d %windir%\System32\qmgr.dll

  Restart then try and start the BITS.

  If you get the same error again, copy / paste the following text in the field run and click OK:
  Reg add HKLM\SYSTEM\CurrentControlSet\Control\BackupRestore\FilesNotToBackup

  Reboot once more and then try and start the BITS.

  Let me know how you please.

• Windows Installer service is missing from my Vista 32 bit. How to re-install Windows Installer?

  Windows Installer service is missing from my Vista 32 bit SP2. How can I re - install Windows Installer? None of the 27 sets of update and Installer Cleanup solutions worked, a last resort option could work but it will not install without the Windows Installer Service.

  I tried each FixIt option, says the problem is solved, but isn't.
  I tried install Windows Installer 4.5, but it came back as not relevant to my system (because there is no previous installer to update).
  Tried a number of recommended patches, but they are all geared toward fixing the problems of Windows Update not a lack of Windows Installer.
  MicrosoftFixit50202.msi seems to have corrected Windows Update on my laptop but it won't install on Vista pc because there is no Windows Installer.
  I ran the installation disc the option 'fix' with the original, it finished but has not replaced Installer and nothing was fixed.

  How can I put the installer of Windows on my computer?  If there are files on the original drive that can be put into drive C what are they?
  Someone suggested to uninstall Service Pack 2, and then reinstall, but if I have no installer of Windows that may not work. Others said they reformatted to correct same question, but it did not work.

  These previous solutions have not helped:
  Could not locate the installer of Windows on Vista Home Premium 32 bit.
  Difficulty the installer of windows vista sp2
  code641/MSI
  Failed installation error msg error 80070641 Windows update

  After a month of butting heads with the refusal of Microsoft to actually help except to sell us all a new copy of Vista or Win7 at the normal price I solved the problem myself.

  1. I made a list of all my software purchased, including required registration keys, etc. and site URL for those who I don't have a disk for.
  2. Deleted registry back up on my external hard disk, reloading apparently one makes the backed up registry problems breed more.
  3. Inserted my drive from Dell to factory since 2007 and restarted. Press a key to boot from the CD. Chose "reformat hard drive' first, then when prompted hit"Reinstall"(slightly different wording on your computer).
  4. After you have reinstalled the factory disc 32-bit Vista, I spent hours 7 next installation of SP1, SP2 and hundreds of updates. Note that several times Windows Update said some updates to date has failed, but finally everything installed correctly by repeating the sequence of installation/reboot to update. There have been a few files that reported to turn off computer completely, I've shown... clicked with indicator shutdown (stop), let it do its thing until it turned off the computer and then the computer restarted manually later. After a total of 8 hours and 14 minutes as my Vista has been fully loaded, updated the installer is still intact, everything works very well and did not cost a penny.

  It has been 2 days since the reformatting/reinstall. I reinstalled all my additional software without problem. System Mechanic is back in service without any prejudice to my installation Service. Seems that something is involved with .NET Framework 4 triggered a defense mechanism that caused the installer should be deleted, solved the problem of the .NET Framework from Microsoft, but it can be installed by the installer being removed to protect our computers. The question was not just with Dell computers, it is Dell support is just as incompetent that Microsoft support batch so more Dell owners were here to complain.

  --------------------------------------------------------------------------------------------------------------------------------------------
  FYI: my mobile Samsung with Win7, the correction was easier because my installation Service has not been removed:

  1. Uninstalled all the software using .net Framework 4 (only 2)
  2. Uninstalled all .net Framework 4 bodies found on my list of programs (Client Profile and Essentials)
  3. A ran my System Mechanic to remove debris aka too much clutter and correct registry problems
  4. Laptop rebooted then ran Windows Update. All the updates installed with 3 requiring the judgment to install. .NET framework reinstalled with updates.
  5. Reinstalled my 2 pieces of software that use .NET Framework.

  It has been 4 days without any problem at all. So, in my case, it's .NET Framework 4 that created and continued the problem, even if the specific audit FixIt kept saying all .NET Frameworks have been installed correctly.

• Are the "Oracle Hyperion Reporting and Analysis" and "Oracle Hyperion Financial Reporting," one and the same product?

  Are the "Oracle Hyperion Reporting and Analysis" and "Oracle Hyperion Financial Reporting," one and the same product?

  Alanysis and Hyperion reports has a scope of report include Hyperion Finanicial Reporting, web analytics services RA framework and the Foundation as a layer application and client level there EMP Workspace, SmartView etc.

  Thank you

  ~ KKT ~.

• Unable to change exportfolders value of MBeans for FRConfig.cmd for the Hyperion Financial reporting 11.1.2 version.

  I am not able to change the exportfolders value in MBeans for FRConfig.cmd Hyperion Financial Reporting 11.1.2.

  When I enter the value, it just disappears. I'm missing something here. ?

  I need set the path of export for PDF generation in the Hyperion financial report for lots.

  Edit FRConfig.cmd and update

  
  

  Set EPM_ORACLE_INSTANCE=%MIDDLEWARE_HOME%\user_projects\epmsystem1

  Update epmsystem1 for the name of the correct instance EMP

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Migrate version 11.1.1.2 to 11.1.2.1 financial reports?

  Recently, I've built a brand new environment 11.1.2.1. Our current environment is running 11.1.1.2. I've migrated successfully shared services and data from hfm across to the new environment. Now, I'm moving reports financial reports. Anyone know the best way to do it? Thank you.

  Yes I go for it, but I remember when you import the zip file it you will be asked for a database connection and everything what connection database you select, it will apply to all reports that you imported. So, I would be just to import reports that share the same database connections.

  Furthermore, I may be wrong on both environments with the same folder structure. I don't think that's true. Sorry for the confusion. Please try it and let me know if you have any other questions.

  See you soon,.
  Mehmet

• Hyperion financial reports on server location

  Hello
  
  Hyperion financial reports are available as files raw on the web server somewhere? I would like to restore a backup and hoped that they would be in the directory \Hyperion in the form of .as files. Is probably not as easy, but any info would be great.
  
  Thank you.

  For 7.2.5 reports, they're in a SQL database table (I think that something RPT) and the binary data field contains the text of the report. (I did like that because if you wanted to check what reports made use of an account, entity, you could just do a search on the table... freetext)

  9.3.1 for reports, they are in a crazy file structure, with crazy names and are compressed. You will find them under the web/RM service request folder. So X - REF names correctly, you will need to consider the more BI a little bit database. The table of interest is V8_CONTAINER.

  I've implemented a script SQL 2005 that will generate you a list of all the reports in the form of hierarchy. This will help you also attach files / reports in file structure...

  NOTE: WHERE d.PARENT_FOLDER_UUID = 'REPORTMART.

  ↑ This will return a hierarchy of EVERYTHING in the table which will probably include things you don't want to watch. Simply change "REPORTMART" to match a UUID specified in the results, and then the query will show you all items at that time here instead.

  Hope this helps

  Charles

  ------------------------------------

  USE the name of your DB here;

  GO

  WITH reports (PARENT_FOLDER_UUID, CONTAINER_UUID, NAME, DESCRIPTION, level, sorting, CREATION_DATE, LAST_MODIFIED_DATE)

  AS

  (

  -Definition of anchor member

  SELECT d.PARENT_FOLDER_UUID, d.CONTAINER_UUID, d.NAME, d.DESCRIPTION, 0 as level, mount (NAME as nvarchar (1024)) kind, d.CREATION_DATE, d.LAST_MODIFIED_DATE

  OF V8_CONTAINER d

  WHERE d.PARENT_FOLDER_UUID = 'REPORTMART.

  UNION ALL

  -Recursive member definition

  SELECT d1. PARENT_FOLDER_UUID, d1. CONTAINER_UUID, d1.NAME, d1. DESCRIPTION,

  Level + 1, cast (sort + "|" + d1.) Name as nvarchar (1024)), d1. CREATION_DATE, d1. LAST_MODIFIED_DATE

  OF V8_CONTAINER D1

  INNER JOIN reports r AS

  ON the d1. PARENT_FOLDER_UUID = r.CONTAINER_UUID

  )

  -The statement that executes the CTE

  SELECT replicate (' ', level) + NAME, DESCRIPTION, CREATION_DATE, LAST_MODIFIED_DATE, level, PARENT_FOLDER_UUID, CONTAINER_UUID

  Reports

  sort order

  GO

• Export EN without using Financial Reporting Studio

  Hello.
  
  Is it possible to get the designed reports to the Financial Reporting Studio for import into another machine?
  I ask this because I am not able to access this machine more. So, do you have another machine, but now, with a new database, with no report =)
  
  Thank you.
  
  See you soon,.
  Rafael brands

  I know that there is a report migration tool as we used it when we went to 7.2.5 9.3.1. I'm not 100% if you can make use of it as a tool for simple 'copy' (i.e. copy even software version reports from one server to another or if it only works in specific upgrade capability); However, I would like to start on this track first.

  I think that the roadblock that will hit you. However, is that I think that the environment should be operational for this utility work.

  If this is the case, the manual way is ugly. As I mentioned in a post unfounded, reports (since the system 9) are scattered in different rooms. In the database of the workspace, you will find information that links a UUID (Unique identifier) to a "friendly name". In the file system of your server that is running the web application of RM, you will find the actual report files. Files / folders for reports are not favorable to humans; Therefore, you must the DB to resolve names. The other question, you have here is the connection of database for reports. When you create a database connection, it also gets a generated Unique ID value that is stored in the reports. If the ID does not exist in the target system, you must update all reports; If not, will not work correctly.

  If I HAD to do by hand (i.e. old workspace is not operational, so I can't export), here's what I'd do...

  -CAUTION - I don't think that someone here will approve this method and I don't really either, but...

  "Old system" to the "new system".
  -----------------------------
  #1-nouveau system--> create your database or connections, preferably with the same name (s) as previous environment

  #2-old--> Locate naming the information in the workspace database tables (if you don't know where it is, find a previous post, I put on the reports and the database where I explain this)

  #3-vieux--> locate physical files / directories (see previous post on the subject)

  #4-old--> is at least ONE report for EACH database connection used in the old system. Open the file in Notepad and search for the connection ID. (NOTE: files are compressed so get something like 7zip inside)

  #5-nouveau--> open the workspace database search the database connection information. For each connection that you created, update the ID matches the ID in the reports.

  At this point, we have two different options...

  Option 1 - create your own archive export
  ---------------------------
  Now that you know where are all the old reports and you know the appropriate designation of the reports, you can make your own archive export which you can then import into the new environment. The structure of archive 7zip would be something like this

  ReportExtract.7z
  (null) File--> that would correspond to the folder your workspace root
  My report Folder 1--> your stuff to the workspace here
  My report folder 2--> etc.

  The thing of import to recognize here is that when you open the 7z file, you must have this file NULL; otherwise, it does not. I know not how to create such a null record, so what I do is usually to create a file extracted using workspace to export, then use 7zip to alter the archive to include what I really want...

  #1-vieux--> the names of Fix. Using the information from the database of the workspace write a quick script to browse the folder / folder structure and rename all the files and folders so that they have the friendly name.

  #2-old--> for files that were renamed just decompress. This can be accomplished with a script file as well bat.

  #3-nouveau--> go to file export and choose the highest folder you can and export all items. Save the file somewhere convenient that you will have need of ot that immediately.

  #4-old--> open archive with 7zip. You see a folder without a name, double-click it. Now you should see the beginning of the structure of your report (if you have one on the new environment...)

  #5-vieille--> using windows Explorer, drag and DROP the files/folders of measures #1 / #2 in the window 7zip. 7zip then adds these folders/files to archive report, we have created.

  #6 new--> connect to the workspace and select the file, the import option. Continue to use archive created previously. If everything is done correctly, the reports will shoot and you'll be good to go at this point. (OTHER THAN THE SECURITY)

  Option 2 - manually entered database and copy the files/folders
  ---------------------------

  In theory, it is slightly faster, I have never tried so I will say not for the fact that it works. I'd probably recommend only try it is the old and new machines running the SAME version of the software AND the new machine added nothing to this yet...

  #1-search for RM1 service folder and copy all files/folders RM folder on the new server

  #2-locate the old tables of database associated with report of files, folders, permissions, data connections and copy data in database tables.

• Export of batches of regular financial report with LCM

  Hi people. 11.1.1.3 EMP here running.
  
  I'm trying to use LCM to export regular batches of Financial Reporting. When I shared in the context of Reporting and Analysis Services, under the zoom on objects regular, I don't see any regular object and yet I have about 200 EN batch reports on demand on my dev server.
  
  I looking in the wrong place to export these or is there another way?
  
  
  Thank you
  Tom

  11.1.1.3, the files get exported under the Hyperion\Common\import_export folder.

• The ports to open for Hyperion Financial Reporting

  Hello
  
  We are facing a problem in the studio of Hyperion Financial Reporting while trying to connect to the Essbase database. When I gave the essbase cube, studio details is just off the hook and does not. I am able to select the application as the Essbase Server database.
  Give you a brief idea that Server1 holds Essbase, EAS, and Server2 Shared Services, HFR(including Studio), Integration Services. We opened the port 1423 between Server1 and Server2. We also opened 10080 (I don't know why), 32768, 32769 to interact with the application running on these ports. still no answer.
  
  Can someone please suggest me if I need to make some additional changes/configurations. or I do something wrong?
  
  Thank you
  K

  MP says:
  Once again people are unwilling to open as much range and are looking for a small number. any suggestions?

  You can take a look at SERVERPORTBEGIN and SERVERPORTEND
  http://download.Oracle.com/docs/CD/E17236_01/EPM.1112/esb_tech_ref/frameset.htm?serverportbegin.html

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• After BI + patch can't see Planning and financial reporting

  Hello
  
  We have applied the patch 9.3.1.2.0.333_win32 HBI and now we cannot see the Planning or Hyperion financial reports available to it on the workspace.
  
  However, we can access HyperionPlanning by using its url http://servername:8300 / HyperionPlanning
  
  And see the repository using Studio EN
  
  Help...

  I would double check you applied correctly and I resarted all services.
  If you are sure it has correctly applied, you may need to seek to return to before the patch.

  See you soon

  John
  http://John-Goodwin.blogspot.com/