Shared Services with the Financial Reporting - 11.1.1.3 security problem

Similar Questions

• Services of missing financial reports?

  (Posted in BI challenge to go first, but then it seemed the right place.)
  
  I try to install Oracle EPM 11.1.2.1 version and I'm far enough along, but this seems weird. Everything is installed and configured, but I have no Windows service: for EN on the tier of services server.
  
  Looking at the boot order in the Installation and the Configuration Guide, I noticed that Financial Reporting Services just before the Financial Reporting application server. I guess that's what was the 4 services on the services that have been consolidated to 2 tier server, but I don't see any.
  
  I checked the installation program, I have no box under the heading 'Services' level for EN, and no 'Financial Reporting Services' element not listed when I go to "choose individually. It seems unfair, but I'm not sure. I have re-uploaded all 13 records of electronic delivery reported as necessary in the Readme file. Yet, nothing.
  
  Print server is installed with the client EN, obviously? Is not a server-side service more? Or is he now allowed to install the EN client on the same machine as the server is turned on, to cause problems?
  
  Thank you for your attention,
  
  -Joe

  Hey Joe,

  There are only 2 services of financial reporting in 11.1.2.1, one is for the Web Application of Financial Reporting which is the subject of report and analysis > financial information in the Setup program, the service must be created during Application Web EN is deployed using the Configurator of EMP
  The other service is the print server that belongs to the EN Studio Installer, you can install it on the server.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Shared services and the workspace URL do not work in the EPM 11.1.2.2 system

  Hello
  Shared services and the workspace URL do not work in the EPM 11.1.2.2 system
  I installed the EPM V11.1.2.2 system in the single server environment (MS 2008 Server R2) with the following components:
  * Foundation Services
  * HFM
  * FDM
  
  Have used embedded Weblogic server as a web application server and Oracle HTTP server as a web server. The installation was successful.
  During configuration.
  (1) I selected the option to deploy applications web SSP and workspace to a single managed server. Applications deployed successfully at EPMServer0.
  (2) in addition, I have selected to configure Oracle HTTP server as a web server.
  These two steps were successful.
  
  But shared services and the workspace URL do not work. We get a 404 error.
  Shared services: http://inmum01hyp05.internal.vodafone.com:19000/interop/index.jsp
  Workspace: http://inmum01hyp05.internal.vodafone.com:19000 / workspace /.
  
  When I checked the EPMServer0, Weblogic administration console is in SHUTDOWN State, tried to start it but it goes by State ADMIN instead of RACING.
  Checked the newspaper EPMServer0 to 'D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs' and found the error at the end of this message.
  
  Can someone please suggest a solution for this.
  
  # < 6 June 2013 11:43:20 IST > < emergency > < hats > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499200246 > < BEA-149259 > < server 'EPMServer0' 'EPMServer' is high in the State of the administration due to the failure of the deployments. >
  # < 6 June 2013 11:43:20 IST > < Info > < WebService > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < anonymous > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499200902 > < BEA-220103 > < asynchronous web service support is not fully configured. The response of async web service /AsyncResponseServiceHttps for this server was deployed not entirely because the queue JMS reliability was not defined/deployed: weblogic.wsee.DefaultQueue. Periodically, the server either completing the deployment for the service. Usually, this message can be ignored unless there are asynchronous web service applications. To completely disable the support of web service asynchronous to avoid this message, set - Dweblogic.wsee.skip.async.response = true. >
  # < 6 June 2013 11:43:21 IST > < Info > < WebService > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < anonymous > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201090 > < BEA-220103 > < asynchronous web service support is not fully configured. The response of async web service /AsyncResponseServiceJms for this server was deployed not entirely because the queue JMS reliability was not defined/deployed: weblogic.wsee.DefaultQueue. Periodically, the server either completing the deployment for the service. Usually, this message can be ignored unless there are asynchronous web service applications. To completely disable the support of web service asynchronous to avoid this message, set - Dweblogic.wsee.skip.async.response = true. >
  # < 6 June 2013 11:43:21 IST > < Info > < WebService > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < anonymous > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201090 > < BEA-220103 > < asynchronous web service support is not fully configured. The response of async web service /AsyncResponseService for this server was deployed not entirely because the queue JMS reliability was not defined/deployed: weblogic.wsee.DefaultQueue. Periodically, the server either completing the deployment for the service. Usually, this message can be ignored unless there are asynchronous web service applications. To completely disable the support of web service asynchronous to avoid this message, set - Dweblogic.wsee.skip.async.response = true. >
  # < 6 June 2013 11:43:21 IST > < Info > < WebService > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < anonymous > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201106 > < BEA-220103 > < asynchronous web service support is not fully configured. The response of async web service /AsyncResponseServiceSoap12Jms for this server was deployed not entirely because the queue JMS reliability was not defined/deployed: weblogic.wsee.DefaultQueue. Periodically, the server either completing the deployment for the service. Usually, this message can be ignored unless there are asynchronous web service applications. To completely disable the support of web service asynchronous to avoid this message, set - Dweblogic.wsee.skip.async.response = true. >
  # < 6 June 2013 11:43:21 IST > < Info > < WebService > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < anonymous > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201121 > < BEA-220103 > < asynchronous web service support is not fully configured. The response of async web service /AsyncResponseServiceSoap12 for this server was deployed not entirely because the queue JMS reliability was not defined/deployed: weblogic.wsee.DefaultQueue. Periodically, the server either completing the deployment for the service. Usually, this message can be ignored unless there are asynchronous web service applications. To completely disable the support of web service asynchronous to avoid this message, set - Dweblogic.wsee.skip.async.response = true. >
  # < 6 June 2013 11:43:21 IST > < Info > < WebService > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < anonymous > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201121 > < BEA-220103 > < asynchronous web service support is not fully configured. The response of async web service /AsyncResponseServiceSoap12Https for this server was deployed not entirely because the queue JMS reliability was not defined/deployed: weblogic.wsee.DefaultQueue. Periodically, the server either completing the deployment for the service. Usually, this message can be ignored unless there are asynchronous web service applications. To completely disable the support of web service asynchronous to avoid this message, set - Dweblogic.wsee.skip.async.response = true. >
  # < 6 June 2013 11:43:21 IST > < Info > < WebLogicServer > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201137 > < BEA-000256 > < Invoking weblogic.transaction.internal.StartupClass.main (null) >
  # < 6 June 2013 11:43:21 IST > < Info > < hats > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201168 > < BEA-149059 > < dms.war request DMS Module [Version = 11.1.1.1.0] changes from STATE_PREPARED to STATE_ADMIN on the EPMServer0 server. >
  # < 6 June 2013 11:43:21 IST > < Info > < hats > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201168 > < BEA-149060 > < dms.war DMS [Version = 11.1.1.1.0] request Module successfully go from STATE_PREPARED to STATE_ADMIN on server EPMServer0. >
  # < 6 June 2013 11:43:22 IST > < Info > < hats > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499202402 > < BEA-149059 > < inspection.wsil STATE_PREPARED request Module, wsil-wls is transition to the STATE_ADMIN on the EPMServer0 server. >
  # < 6 June 2013 11:43:22 IST > < Info > < hats > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499202402 > < BEA-149060 > < inspection.wsil request Module wsil-wls successfully moved from STATE_PREPARED to STATE_ADMIN on the EPMServer0 server. >
  # < 6 June 2013 11:44:13 IST > < Info > < Diagnostics > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1370499253433 > < BEA-320000 > < Diagnostics of the subsystem initializes on the server EPMServer0. >
  
  Thanks in advance.
  TEJ

  Hi all.

  Thanks for all your useful contributions.

  Finally, the reconfiguration is successful.

  Yes John, the problem was with the deployment, but was not able to understand what goes wrong with the deployment.

  Tried to uninstall clean twice with the deletion of registry. Last updated variable of path by removing all entries related to Hyperion during the uninstall.

  Installation and configuration was successful after that. In addition, I did not compact deployment this time and used separate web servers to the deployment.

  Finally, Shared Services and the workspace URL work correctly.

  http://servername:28080/Interop/index.jsp

  http://servername:28080 / workspace /.

  Kind regards

  TEJ B

• Oracle recommends from services with the account of the installation. Can someone please explain why?

  Or is it a thing of the past and not needed in the new versions?

  Thank you
  Ted.

  You don't need to start services with the account of the installation, it could be several cases, the local system or a domain account.

  See you soon

  John

• Migration of the financial reports of prod Dev

  Hello
  
  I'm back for more urgent help...
  
  Can you please share the steps of the migration of the Financial reports of Dev in the Prod. The version is 9.2 X.
  
  Thanks in advance for your help...
  
  -Jean...
  
  Published by: user640496 on January 29, 2009 14:21

  Hello

  No, you don't have to take anything offline to migrate the reports.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• I can't make a connection wifi with my Nook Color camera using a Microsoft MN - 700 wireless router. Can someone help me with the settings that could take care of this problem?

  I can't make a connection wifi with my Nook Color camera using a Microsoft MN - 700 wireless router.  Can someone help me with the settings that could take care of this problem? I have a Dell netbook and a laptop HP working with the router so I know it works.  The Nook also works in a Barnes & Noble store it seems so that the works of Nook.  I have a similar problem with a LG Vortex phone where I can't do the wi - fi connection.

  Please post on the Support forums technical Nook for help because it is not a Windows 7 problem...

  http://bookclubs.barnesandnoble.com/T5/nook-technical-support/BD-p/nooksupport

  .. .also than that...

  http://www.barnesandnoble.com/u/nook-support-connectivity/379002491/

  Don't forget the network encryption type, IE. WPA2/WPA and key/password / password must match the wireless router/access point.

  See also this about WPA2 on the MN-700...

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/cant-connect-to-MN-700-wireless-router/1789978f-7C90-4686-A956-2d17eb79960d

• I'm trying to uninstall Cs6 master collection and I can't because this information is displayed ERROR: DW040: the product '{E8AD3069-9EB7-4BA8-8BFE-83F4E69355C0}' is not installed. Cannot proceed with the uninstall. How can I solve this problem?

  I'm trying to uninstall Cs6 master collection and I can't because this information is displayed ERROR: DW040: the product '{E8AD3069-9EB7-4BA8-8BFE-83F4E69355C0}' is not installed. Cannot proceed with the uninstall. How can I solve this problem?

  Hi Paulov53532347,

  Try to use the cleanup for the same tool: use of the Adobe Creative Cloud cleaning tool to solve installation problems

  Let us know if that helps.

• How/where are the financial reports stored on the file system of the server?

  We recently lost a large part of our reports on our server. We cannot understand what the restore directory location in order to get these reports back. Where is the default directory for 11.1.2.2 financial reports? And in what format the reports are being saved?

  EN reports can be found in the file system of the operating system (o/s), but the EMP workspace hierarchy (folders, tree, etc.) are stored in the database of repository Hyperion bi +.

  On the system of operating system files, the reports are stored in RM1 folder under folder "C:\oracle\Middleware\user_projects\epmsystem1\ReportingAnalysis\data\RM1\root".

  The names of the reports placed here are UUID (identifiers of long - not the actual names).

  For example:

  When a report is created with the name 'My report' in Studio Financial Reporting, by connecting to the EMP workspace will be available in the name of financial reports/folder where it was saved.

  the actual report will be stored in a subfolder of the RM1\root folder on the file system.

  The file name will be a unique identifier (not the real name of the report is 'my report')

  It will be generated 'on the fly' based on various things such as the date and time on the server (i.e. 0000012f5af72b1a-0000-ec71-c0a8006c.00000130510b77bb-0000-5133-c0a8006c.1)

  The meta-data for this report ('My report', that is in the folder in the workspace, the date of the change of the report, permissions on this report, etc) will be stored in the Hyperion bi + DB as an object in an encrypted table. Financial reporting knows what metadata in the Hyperion bi + DB which corresponds to the report, in the file 'RM1\root' because all rows in the table for that object in the Hyperion bi + PB related to 'My report' will be referenced using the UUID of the file (for example 0000012f5af72b1a-0000-ec71-c0a8006c.00000130510b77bb-0000-5133-c0a8006c.1)

  Note: The location of the folder of RM1 differs with each facility's operating system.

• There is no request for 'Shared Services' in the Group of the Foundation

  Hello world!

  I am facing a problem during the installation of the EPM system.

  After the deployment of Foundation services, there is no demand for services registerd shared in the Group of the Foundation

  I looked in 'Shared Services' = > 'Groups Appication' = > 'Foundation' only -Manager of calculation and -EMP architect

  I tried to redeploy the service of the Foundation, but is not shared Services Application

  I looked in the table HSS_COMPONENT with COMPONENT_TYPE = 30 and did not find the Shared Services

  This application exists on the production server, I tried to export application Service sharing of production on the new server using LCM, but error

  EPMLCM-18000: name of the invalid application - SSP MDF.

  Everyone knows how to save Shared Services Application?

  
  

  
  

  Solve the problem by inserting manually lines HSS_COMPONENT, HSS_COMPONENT_PROPERTY_VALUES, HSS_COMPONENT_LINKS

  as on the production server

  insert into HSS_COPMONENT values (' 1111.HUB ',' Shared Services ', 30)

• Error in the REST Web Service with the text output Format

  Hi all
  
  I am referencing a REST web service and can successfully connect to it and retrieve the results with the output XML value Format.
  
  I don't need the node values, I want to just grab the entire XML string and fill a table with her column.
  
  When I create a new Rest web service reference, including the text output Format value and then create a form/report to run it, I get the following error when I click on "send":
  
  ORA-06550: line 1, column 63: PLS-00103: encountered the symbol "end-of-file" when expects it one of the following numbers: (- + new case mod not null to other current County avg exists max min prior sql stddev sum variance execute forall time timestamp interval date fusion pipe)
  Error sending request.
  
  There is control in the XML characters, but surely, this is handled by the Apex, so I'm not sure what the problem is here.
  
  Any ideas most welcome.
  
  Thank you
  Rhodri

  Rhodri:

  Request Express waiting for answer text actually be answer text, delimited by other characters that denotes a new value and a new Recordset. You should leave the response as XML. The XML document will be stored in the column xmltype01 in the collection that you specify. You can then convert this column xmltype01 in a clob, if you like using the. toClobVal().

  Kind regards

  Jason

• Upgrade Vista to 7 the SafeMode problem with the compatibility report

  I'm trying to upgrade my computer to Windows 7 after problems with Vista, and now I can start only my computer into safe mode now.

  The update disc work until I get to the "compatibility report" in which it gives me the message: "the computer started using the Windows installation disc.  Remove the installation disc and restart your computer so that windows starts normally, then restart the update."

  This message appears in safe mode with networking, which was started without the installation disc inserted.  I then restarted and booted from the DVD and tried to update again, and he gave me the same message (which makes sense because I boot from the disk).

  This message occurs when I start in safe mode or safe mode with network.

  Is there anyway to solve this problem, so I can go ahead with the update?  Also, I can't start my computer in normal mode to respect the indications that gives me this message.

  Hello
  You can't go in safe mode

  1. Close all running programs and open the windows if you are back on the desktop.
  2. Click on the Start () button.
  3. In the search box of the Start Menu () type msconfig and press enter on your keyboard - follow UAC prompt.
  4. The System Configuration utility opens
  5. Make sure the Normal startup is selected
  6. then click on the STARTUP tab at the top
  7. Make sure that the startup is disabled
  8. Apply - OK - then follow restart guests

  If it does not do a startup repair

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  Windows 7 installation issues and ask in the forums of windows 7

  http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=2

• How to associate cluster esx with the data report store

  Hi all

  I'm running a repore that displays data stores less than 50 free concerts. The storage team would like a coloum for esx clusters associated with the LUN. I can't see to find it and what is possible.

  Thanks in advance,

  Scott.

  I would create a WCF function, script type, with a timeRange parameter and a new data store VMWDatastore context parameter, required, not a list.  Set the output in common: string.

  Add the following script:

  QS = server. QueryService

  Query = "!" "VMWCluster where esxServers.datastores.uniqueId = ' ${datastore.uniqueId}"

  cluster = server. QueryService.queryTopologyObjects (query)

  clusterNames = clusters? collect {cluster-> cluster?. name}?. Join(', ')

  return clusterNames

  You can then use this in your report, feeding the entrance of context for the current row data store.

• Cannot find a service record for vCenter service with the host name "IP address"

  After upgrading to vCenter native 5.5 to vSphere Client device everything works, but not all orders for PowerCLI.

  After a command gives me error under VMware vSphere PowerCLI 6.0 Release 1

  Get-TagCategory: 13.07.2015 16:50:48 Get-TagCategory could not find a service record for vCenter service with host name 10.x.x.x

  In Zeile:2 Zeichen:1

  + Get-TagCategory

  + ~~~~~~~~~~~~~~~

  + CategoryInfo: ObjectNotFound: (:)) [Get-TagCategory], VimException)

  + FullyQualifiedErrorId: ViCore_InventoryServiceProxy_GetInventoryServiceInfo_NoVcRegistration, VMware.VimAutomation.ViCore.Cmdlets.Commands.Tagging.GetTagCategory

  does anyone have a solution or an idea for this problem?

  Best

  Marco

  I have exactly the same problem. Are there solutions yet?

  Best regards

  René

  Found the solution in the database (2127028).

• ADF Mobile access protected web service with the user name and password

  With Jdev 11.1.2.4 (with the extension of the ADF Mobile) I am creating a data control that uses a SOAP web service. The web service is not protected by a policy of wss, but its point of endpoint URL is only protected by simple HTTP authentication (internal weblogic server is not accessible public.) We use an Apache server that is configured with a location that is a simple proxypass on url of the web service endpoint weblogic. This apache location apply simple HTTP authorization). I can invoke successfully the methods with parser HTTP by simply adding to the request HTTP header "authorization: xxxxxxxxxxxxxxxxxx base =" (where xxx = user name and encrypted password).

  In the mobile application of ADF, I used the DataControls.dcx-> window to connect to the Web Service change and provided the username and password to the URL of the endpoint. The problem is that after the deployment and execution of this application on the emulator (or the device itself), I get no data by the web service since with the HTTP 401 error http server responses. It seems that that the credentials are not deployed to the device, so while the application is running can not find them.

  I searched a lot and found a similar article (quite old) in the RTO by Frank Nimphius here access_protected_web_services_from_adf.htm
  

  Is there a way to do this, or if I'm missing the entire image?

  Thank you very much.

  Christos

  Check out blog Shay https://blogs.oracle.com/shay/entry/accessing_secure_web_services_from

  or Andrejus http://andrejusb.blogspot.de/2012/11/adf-mobile-secured-web-service-access.html

  Timo

• Colon in link with the interactive report

  Hello
  
  I have two interactive reports which are connected by link column on one of the columns, the problem is that some of the values contains a colon
  
  for example, the value is ABC: 123 , but the linked report a value = 'ABC' is generated in the filter
  
  So I can see there are many sons and based on those I can escape the string using APEX_UTIL. URL_ENCODE so now I get Value = 'ABC % 3 A 123' in the filter that is still nothing.
  
  So I think on the interactive report, I need to somehow convert the return value on the page so the interactive report can deal with it, but I don't see how to do this and I can not find all threads that deal with these.
  
  I don't want to use an element on the page to filter the report the report is sometimes access directly and it would act/look different to other pages where we have it but don't have the problem that these values have no settlers. I can't remove the colon as they come from an external source.
  
  We use the apex 4.1
  
  Any ideas?

  WOWL wrote:

  This isn't the real value, but I think that its close enough for users, if I were to create a dynamic of any idea action that she could do as my knowledge of dynamic action is limited.

  Create dynamic Action to replace "_" with ":" when the IR is updated:

  When

  Event: After refresh
  Selection type: Region
  Region: IR / / whatever your area

  Real Actions

  Action: Run the JavaScript Code
  Fire on Page load: Yes

  // Change 'Colon Val' in selector to heading of colon-containing column
  $("#apexir_CONTROL_PANEL_COMPLETE .fielddata a:contains('Colon Val like')")
    .each(function () {
      $(this).text($(this).text().replace('_', ':'));
    }
  );