Servo motor RC directly from sbRIO e/s digital

Similar Questions

• Pulse/counter of encoder data wrong servo motor

  First of all, I am very new to the use of labview.  I'm trying to complete a project, a former employee was working on that.

  For a quick background on what I'm working with, I use an NI DAQCard-6036E connected to a SC-2345.  SC-2345 is then connected to a load cell, Omron R88D servo driver and an omron servo motor.  The actuator is an incremental encoder with resolution of about 2048 pulses per revolution.  My labview program includes a counter that records the data of the encoder on the servo-motor.  I was able to get accurate data during the test through the program of measurement and automation of the engine manually.  Also when running through the specific DAQ assistant, I use for my counter, I'm getting correct readings by turning manually engine.  Once I run my full program, instead of get 2048 pulses per turn, I'm between 34000 and 36000 pulses per revolution.  The more logical assumption is that I get vibrations in the engine itself or some kind of noise disturbs my signal.  First, I tried to change the possible settings via the omron servo driver that could reduce the vibrations of the engine.  I try to change the stiffness settings, enable, and disable the automatic adjustment feature and a few other parameters specified by the user manual which could cause vibrations.  If turn the settings from rigidity as low as possible, I am able to get around 2000 impulses per turn, but data are very sporadic. In addition, my equipment must be very stiff, and with setting the lower rigidity for the servo driver, I can almost stop the engine with a minimum of force.  My equipment must be able to travel at a near constant speed with fluctuations of up to 200 N force.  Any suggestions on the direction in which I should go in search of a countermeasure?

  Thank you

  Experience with actuators is that they can produce large quantities of electrical noise.  I guess that noise can enter the signal of coders.  Look carefully at your wiring and make sure that you do not have a ground loop between your hardware OR and the actuator.

• My iPhone will not send photos or other documents directly from in Apps

  My iPhone 5 has always been able to send photos directly from the Photo App, as well as sending PDF files directly from the Pages App or other documents from other applications. Now, it is no more the case. After hitting the "send" - button, you hear the his "Whoosh"but nothing is actually sent! ".

  I discovered only after people complained to me for not getting points I thought that I had sent.

  When you import the same documents in Mail, there is no problem at all they are sent. The problem exists only IN applications.

  I tried to restart the phone several times as well as resetting - no change.

  It isn't a question of 2 check points.

  I would be very grateful if someone knew the solution to this problem.

  See you soon!

  I think the next thing I would try is to reset all settings. Settings > general > reset > reset all settings. This will return t e the device settings, to where they were out of the box - to the factory settings. You will need to enter all the settings again including WiFi passwords.

  If this does not work, back up, restore settings, and then restore the backup. If it still does not work, restore like new.

  How to clear your iOS device and then set up as a new device or restore from backups - Apple Support

  The backup of your iPhone, iPad and iPod touch - Apple Support

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support

• Print directly from iPhone without internet via special Wi - Fi?

  Hello world.

  I want to print labels for shipping directly from the iPhone.

  I guess I need printer active AirPrint.

  My question is: did someone knows such printer which will also save me the need to buy a router wireless (Wi - Fi) because the printer itself creates ad-hoc or a direct wireless connection?

  Thank you very much!

  Canon offers a selection of printers that have this feature, their page can be found here. (Sorry, I live in Southeast Asia) They offer the AirPrint and functionality you described, which is not AirPrint. Personally, I use the MG7170 model. DISCLAIMER: I do not receive a financial reimbursement to promote all recommended features.

• Export Firefox bookmarks directly from hard disk.

  Hello

  I would like to export my Firefox bookmarks directly from hard disk. Can someone advise please if this is possible and provide the instuctions?

  (Note: the export option does not work because of Windows keep crashing - cannot open Firefox at all).

  Thank you very much!

  -)

  Copy bookmarks

  To open the bookmark, Manager press the ALT or F10 to rise
  the tool, then select bookmarks. Access key is < Control >(Mac: < command >) < shift > B.

  Once the window is open, the top of the page, press the button
  Import and backup. Select export bookmarks to HTML and follow
  prompts and save it in a HTML file. Copy the file to another computer.
  Repeat the above instructions, BUT select Import Bookmarks in HTML,

• New content directly from the server

  How can I force my browser to download new content directly from the server? It was possible to do so using the SHIFT key pressed and make page reload at the same time. I tried and it didn't work. I'm doing something wrong?

  You can reload webpages and ignore the cache to refresh potentially stale or corrupt.

  • Hold down the SHIFT key and click the Reload button
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (Mac)

• Create a task directly from an email

  I would like to create tasks or calendar events directly from an e-mail message. So far, I have not found all the instructions on how to do it, if it is still possible.

  Click right-Convert to the task or event

• To open this workbook, your computer must have a version of Microsoft Excel is installed and your Web browser must support opening files directly from Excel in the

  Im trying to open an excel file from a shared Web site, I used to be able to open them in Excel, when I used Internet Explorer, now all I see is the spreadsheet on a Web page, when I try to open the file in Excel (there is a tab that asked do you want to open in excel) I get a message "to open this workbook, your computer must have a version of Microsoft Excel is installed and your Web browser. must support opening files directly from Excel in the browser. »

  You have Excel installed?
  
  If so, can you use Internet Explorer for the Web site?

  As far as I KNOW, Microsoft is not an add-on for Firefox can be opened from Excel in Firefox. It may or may not work properly depending on whether this Web site uses a MIME type for files it delivers.

  Another way to handle that would be via Open Office or free agency; both are open source (free) that allows to display files XLS (Excel) , and both programs have a Mozilla browser plugin to allow Firefox to open the 'Calc' of these programs.

  http://en.Wikipedia.org/wiki/LibreOffice
  
  http://en.Wikipedia.org/wiki/OpenOffice.org > http://en.wikipedia.org/wiki/Apache_OpenOffice

• I downloaded a few applications directly from safari, will jailbreak my iphone? More apps that I downloaded Safari isn't in the settings. Help, please

  I downloaded a few applications directly from safari, will jailbreak my iphone? More apps that I downloaded Safari isn't in the settings. Help, please.

  software can not install any other source then app store on an unjailbroken ios device

• How can I email a photo directly from the new 'Photos' (on El Capitan)? There seems to be no way to do it. Nothing is marked for example, 'share'-&gt; 'email address '.

  How can I email picture directly from the new "Photos"?  (on El Capitan)

  In Photos, and when you are in the Photos tab, you should see the following text in the upper right or go out to the right of the photo, you select. Clicking on it should show you the selection by email.

  

  

• How can I export my library of music directly from iTunes?

  Is it possible to do this? Is there any software that I can download? All my music is in one file, but the name of the song and the artist are on the same line. I really don't want not to pass by the 'get info' rename the process again. Is there something I can do?

  You will need to provide more details:

  • What do you mean by 'export my library of music directly from iTunes' - export for what and for what purpose?
  • "All my music is in a single file" is meaningless - your iTunes library consists of many files and folders
  • When you say "the name of the song and the artist are on the same line" do you mean that the name of the song as it appears in iTunes contains the artist name of the song, or something else?

• can I upgrade directly from OS to OS El Capitan Tiger

  Can I upgrade directly from OS to OS El Capitan Tiger?  I put the hand on an old IMAC.

  If the Mac is as indicated in your profile (iMac G5), it can not be improved beyond leopard (10.5.8)

• can I upgrade directly from 10.10.2 to 10.10.5 in downloading and installing manually?

  update directly from 10.10.2 10.10.5

  Log in to the App Store and search for updates.

• Purchase memory directly from Apple?

  Is it better to buy additional memory, I need directly from Apple?  If I shop around to save money, it will be the same quality, I am familiar with Apple if I go somewhere else?

  1. No, unless you are configuring a model that cannot have its RAM updated later.

  2. it depends on the provider. Choose it as OWC or Crucial.

  (138832)

• WANT to 7640 e - all - in - one printer: printer prints directly from scanning screen except on/off again.

  It is a machine purchased in the last 6 weeks.  No problem of implementation.  It prints beautifully our computers/devices.  Initially all the printing (computers, screen and paper is inserted) worked perfectly.  Starting last week, twice when I tried to insert a page to print, the paper stuck, and I had to carefully remove under the rollers.  Then I tried to print a page directly from the hard screen - the printer 'stunned', as it was printing, but nothing appeared.  I pressed the 'X' to stop the operation, has opened the lid, removed the paper and the small round icon kept spinning, spinning, spinning.  I was unable to turn off the printer, (it would have not responded to efforts by pressing the 'power' button) called the hotline (contain a record 45 minutes and transferred twice).  A man extraordinarily annoyed-sounding told me that the problem was that we had plugged the printer on a "power strip".  So I unplugged the printer from the power strip and directly into the wall, turned on the printer and could not reproduce the problem.   During the week, twice, to get the printer to print from the screen, I had to turn the machine off and turn on again.  Today, I printed my computer successfully, then immediately tried to make a copy directly from the screen.  Same problem - had to press 'X' to stop the machine because the printer was not print, then had to turn off the entire printer / disable again seized printed the screen successfully.  I didn't call the helpline because I only have 45 minutes to lose :-)  Please let me know if I need to provide additional information, and I would appreciate any help that anyone can give me.  A whole new machine should not give these problems!  Thank you!

  Hi Katrina,

  I would say that the question seems to be a hardware problem and suggest that you always contact the technical support for replacement of your printer options.

  Join our technical support to the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Thank you