Session Losingg points before the page state is sent

Similar Questions

• The download starts and gets to about 50 MB before the zone State says down load failed after refresh

  Hello

  I just had to update my laptop Azus Windows 8.  I reinstall all my programs.  All my financial records are Open Office, so I need to reinstall the program.  The download starts and gets to about 50 MB before the zone State says down load has failed.  This happens no matter if I choose run or save.  I lowered my security settings for IE but still not completely download.  I downloaded Open Office earlier this year with no problems.  It must be something that I am missing.  Please help I need to do my job.  Thank you

  Do you have any error messages at all when you try to download?

  What utility Antivirus you have installed? Have you tried to disable it temporarily and and see if they work?

  Have you tried to save the download to a different location on the hard drive such as the desktop?

  Have you tried using another user account?

  What type of Internet connection you are on, wired or wireless? If you are on a wireless connection, try switching to a wired connection and try the download.

  Press the Windows key + X

  Click prompt (Admin)

  At the command prompt, type the following command, press ENTER.

  ipconfig/release

  then

  ipconfig/renew

  then

  ipconfig/flushdns

  leave the command prompt

  Press the Windows key + R, type: folder

  Press enter

  Delete the contents of the temp folder

  Restart the computer and try to download again.

  If the problem persists, try resetting your router if you are connected to one.

  Turn off the router, unplug it, wait 10 minutes

  Plug it in again, power up once again

  Reconnect the Ethernet cable

  Try to download again

  You can try to download free Office instead which can OO.org Open files.

  http://www.LibreOffice.org/download/

• Popup before the page navigation

  Hello.
  
  I'm showing a popup before I have a navigation page. The popup is designed as a loading screen with and animated GIF.
  
  There is a button on the screen, when you click on it it should show the popup and then make navigation. (If the window is displayed until the next load of the page, the navigation link in the taskflow bacuse calls several methods between the two screens)
  
  First tried to use the ShowPopupBehaviour, which I discovered was not possible because he cancel the action of the button when encountered.
  
  Then I tried to do a program like this:
  
  public String cb1_action() {}
  FacesContext context = FacesContext.getCurrentInstance ();
  
  PopupUtil.invokePopup (p1.getClientId (context)); same as popup.show (hints)
  
  
  context.getApplication () .getNavigationHandler () .handleNavigation (null, "next_method_in_taskflow", context);
  
  Returns a null value.
  }
  
  However, it does not, since the popup is not showed.
  
  The question is, how to display the pop-up window before the page navigation is performed.
  
  TIA

  TIA, please tell us your jdev version.

  Your use case is best done using the #027 examples (http://www.oracle.com/technetwork/developer-tools/adf/learnmore/27-long-running-queries-169166.pdf) of http://www.oracle.com/technetwork/developer-tools/adf/learnmore/index-101235.html

  Timo

• Hit to swipe by articles in my pages are white before the page layouts will appear - please help!

  Swipe through the pages on my Samsung Galaxy some pages show white for a fraction of a second before the page layout appears.

  I first thought it was due to the size of the files, so I reduced their one downloaded article with minimum quality jpg. The folio is only 40 MB.

  It doesn't do this when I saw on my dektop Viewer.

  I'm stuck at why this is happening and how to fix this. Can anyone help?

  Thank you

  Android visual experience is less than stellar. Adobe is working on a

  Viewer native for Android which should make things much better. I do not know

  the release date, but hopefully soon.

• JDev 11.1.2.1 method Execute (with bind variable) before the page is displayed

  Hi all
  
  I have a view object with a query that uses a variable binding. I drag the data on my .jsf page control to create a table. I create a query method on a bean in sight. The query method uses the content of one of the attributes of the bean to set the link for the query variable:
  
  vo.setNamedWhereClauseParam ("CraIdBindVar", sessionBean.getCraId ());
  
  I put a button on the page that calls the method of the request and it fills the table. That's fine, but I don't want the user to have to click the "query" button when browsing this page. I found forums dealing with create an AMImpl.jave method, create a link on the page, create an executable file for the link. It works that the method is executed until the page appears. However, the AMImpl method cannot call sessionBean.getCraid () to obtain the data required to complete the binding variable.
  
  Is it possible to run my method of view range bean before the page is displayed? Or maybe a way for the AMImpl.java method to access the range of view variable?
  
  Thank you, Steve

  Steve,
  You can drag a call method on the workflow activity. Select the new method call activity, and open the property inspector. Here you choose your bean method in the method property. Now, first of all, you go to this activity of method call, then the page.

  Timo

• can I put a specific point on the page to go with a button?

  I got a page of 1024 x 3072 and I put a button to go to a specific point on the page, for example, to 650px to 724px just using a button.

  So my question is can I do it?, how?... Thank you

  Not supported.

  Bob

• Run the java code before the page is rendered

  Hello
  
  In a workflow, can I run the code java before the page/view is rendered (i.e. some preprocessing). I need to be able to have access to the links on the page.
  
  Thank you!

  Yes, you can.
  Right-click on the activity of your method call, choose create the definition of the page and you can add the links you need.

• How the ExecuteWithParams fire before the page requests?

  I have an existing .jspx page.
  
  I'm so ExecuteWithParams works by a button on the configuration page and returns what I want.
  
  How to make fire ExecuteWithParams before the page requests, so I can get rid of the button?

  Hi Blaine,

  You can add an invokeAction to your pagedef (click the sign under the executable section and select invokeAction +) and associate the ExecuteWithParams method for it (add action ExecuteWithParams binding to the pagedef if you don't have it already). After that, set the refresh of the invokeAction to renderModel.

  Now, the invokeAction would be called when the page is loaded.

  HTH.

  Arun-

• Labels, before the Page dimensions in planning web form

  Hello
  
  Is it possible to have the labels before the page dimensions in planning web forms?
  
  For example: < entity view Page drop-down list > entity products < product drop-down list in Page view >
  
  
  I'm using EPMA 11.1.1.3 version
  
  Thank you
  Naveen Suram

  Hello

  This kind of question has been asked before, take a look at the data in forms customization
  There is nothing available out of the box

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Newspaper is always flush with incorrect db RAS before the page?

  When commit txn, I think bdb first flush the newspaper into the disc, but can always leave the db changed in the cache page of approx. These incorrect page are emptied on the disc later when the cache close or env of db is full.
  
  Above is just my guess. If it's just, I want to know when to use 'DB_TXN_NOSYNC' to commit txn, bdb could assure newspaper always rinse before hunting dirty page?

  Hi Jerry,

  To answer your questions:
  1 using the DB_TXN_NOSYNC violates the "write-ahead logging he?"

  No DB_TXN_NOSYNC does not violate "write-ahead logging", but the newspaper
  No is not synchronous emptied on the validation of the transaction, this means that
  transactions can be cancelled during recovery. Indeed, transactions can
  do not appear on the disk at all (the database or log file
  updated) If an incident occurs.

  2. before the Bundesverband deutscher BANKEN evacuates its Sales database pages it is always empty
  the journal of the buffer first?

  Yes, when a data page is flushed to the disk, that a check is made to determine
  If the log record that stores the last modification was emptied.
  If not, the newspaper is emptied of memory at least this LSN.

  3. what berkeley db updates the database files?

  The database cache are emptied on the disk in several circumstances:

  If the cache is full then the least recently used page is emptied
  to make room for additional pages.

  Citing the DB-> sync, DB_ENV-> memp_sync() methods will serve the
  cache database:
  http://www.Oracle.com/technology/documentation/Berkeley-DB/DB/programmer_reference/am_sync.html
  http://www.Oracle.com/technology/documentation/Berkeley-DB/DB/api_reference/C/mempsync.html

  As mentioned, the method of DB-> close() empty information cached data to disk.
  http://www.Oracle.com/technology/documentation/Berkeley-DB/DB/api_reference/C/dbclose.html

  If you use something like the memp_trickle method,
  then in this way, a percentage specified pages
  in the cache are clean, writing incorrect pages to their
  backup of files.

  Executes a control point will serve also incorrect pages from the cache
  database disk files.

  Thank you
  Sandra

• Xp system restore Creation can point before the current date?

  Family XP has create system restore points ahead of the current date.
  The date of the day was may 5, I restore dates back to the 7th by May 23.
  I don't check June or July.  What can / would be the cause for it?

  Thanks for any help,

  Hello

  ·         The time and date is set correctly on your computer?

  Method 1:

  I suggest you refer to the article below and check if it helps:

  How to set a system restore point in Windows XP

  http://support.Microsoft.com/kb/948247

  Method 2:

  Also make sure the time and date is set correctly before the backup. Refer to the article below:

  How to synchronize the time with the time service Windows in Windows XP

  http://support.Microsoft.com/kb/307897

  Hope this helps,

• Is there a way to disable the automatic creation of a restore point for Windows Defender, when he made an update of definition of the window? It is for the definitions of update itself, not the option 'restore point before the scan' can I disable with a

  I want to keep only a single copy of a System Restore Point that I created mine so I know when I did and why I did it.

  With Windows Defender, I noticed that a new restore point is created whenever there is an update of Windows definitions, if I use the method of automatic or manual update.  I found that when I opened the system restore and found a new copy with description: "Installation: Windows Update.  In the history of Windows Defender, I noticed that the time corresponded to when the update the definitions file.

  I unchecked the box under Windows Defender does not create a restore point before a scan of the system.  I tried the Google search to find answers and can't seem to find someone mentioning this.  Also MS sites does not seem to explain on the restores automatic system during the update of the definitions.

  I'm also curious whether Windows Essentials will have the same problem that I am planning to use Essentials instead of Defender and thus get rid of Avast.

  Hi Dudeus,

  Yes, it is not possible to disable your system being created before windows updates restore.

  Bindu S - Microsoft Support

• Muse white space after the body, but before the page footer

  I just changed with almost a complete rewrite of my site and published it in http://www.lowerphotography.com and all is well except for the HOME page. The change was to take advantage of the new sensitive design which is very neat. Before the change of the HOME page was fine. I watched other observations of white space and made sure everything looked good... not hidden things that I could find. The master page works on all pages of the site. But the HOME page after the body and before the footer has this big white/background space after footer. I don't think it's in the master page as it works for all pages I can say. The homepage has texts and pictures on it and a link to another site. But nothing shows that the cause for me. With all the time I've spent on this site a little "bug" which is just a pain trying to get the HOME page to look really good. Suggestions please?

  You can try the solutions in the following positions?

  How to get rid of white space above the footer of Muse

  White spaces that I couldn't get rid of before the footer...

• Hidden entry point causes the Page not found error

  Hello.
  
  I use Apex 4.1.0 on Oracle 10.2.0.5 and mod_plsql (Oracle application server).
  
  I created an application with two tabs.
  
  On one of the tabs in a block of Annonymous PL/SQL, I have the following code:
  

  begin
    htp.p('
  <!DOCTYPE html>
  <html>
  <head>
  <title>AMO PROPOSAL CHECKLIST</title>
  </head>
  <body>
  <h1>AMO PROPOSAL CHECKLIST</h1>
  <form action="" method="post">
  <input type="hidden" name="FS-1" value="1" />
  text2<label for="C12" class="hideMeButHearMe">text2</label><input type="text" name="f02" size="20" maxlength="12" value="" name="TEXT-Q12" id="C12" />
  My Question
  </form>
  </body>
  </html>
  ');
  end;

  When I run this page, the HTML code is rendered correctly.
  
  However, if I then click the other tab, I get the error: Page not found.
  
  I've narrowed the problem to the inscription of this point of entry hidden: < input type = "hidden" name = "FS-1" value = "1" / >
  
  If I simply delete this hidden, switch to another tab throws any error.
  
  I ran this page using Firefox with Firebug. But does not help me understand why this hidden item throws the error.
  
  Anyone know why this is happening?

  EEG wrote:
  Hi, fac586.

  Well, today the good folks at Oracle/Apex unlocked my account apex.oracle.com and so, was able to connect.

  I created a new application:

  Workspace: EEG
  Username:   [email protected]
  Password:   galaxy (Note: all lowercase)
  
  App Id: 28044 (Name = Debug Page Not Found Error)
  

  I created a new user of fac586 , so that you can follow what I've done through the activity if necessary log...

  The application uses the same theme (Sapphire, #17). Page 1 contains a region PLSQL Annonymous Block in which I simply preprogrammed the exact same HTML code that throws the error "Page not found" that started this post. The other page is just a page of report.

  When the application runs, page 1 immediately appears with the HTML code. However, by clicking on the 'Report' tab (for the 2nd page) get the Page not found error.

  If you have time, I'd appreciate it if you could kindly look at what I've done. It would help to understand if you can translate essentially advice you have already posted to what is shown in this sample application.

  After seeing what you do more in detail I am now actually suggesting a completely different approach ;-)...

  Given the potential duration visualized forms and the obvious importance of the applied CSS, preview style has really come in the form of a separate document. (As noted above, you can not have more than one element html, head and body in the page and that and the CSS that you attempt to register is completely destroying the presentation of the APEX on page 1.)

  Therefore, I want to say now is made the preview in a separate document in an iframe within an HTML region, as illustrated on page 3:

  Document source is a process on demand in your application from which you can call a procedure that returns the HTML survey form. The iframe is automatically sized to display the complete form.

  You still need to take measures for the visualized form either by ferry to sand/locked so that it can be made: it is the case in the examples the measure where there is no form action and no submit button, but it is unclear if this is indeed the case in your application?

• Change the color of the point to a point on the page label

  I have several page elements that have labels. My customer wants to change the default color of some of the labels of page elements be of different colours on the page so that they stand out. Can I do this? I can change the color of the data in the actual cell, but I can't change the color of the label.
  
  Example:
  
  ARTICLES: < given here >
  
  I fill the < data here > with a column in a table. I can change that, but what they want to change me is the color of the type in the label ELEMENTS:
  
  Could someone tell me please the process for this if possible.
  
  Thank you
  Patti

  Patti,

  You can do this by adding some CSS where you have the point label.

  Change the desired page element, goto label box, add the CSS label. For example,.

  Item:
  

  I hope this helps.

  -Chris