Newspaper is always flush with incorrect db RAS before the page?
When commit txn, I think bdb first flush the newspaper into the disc, but can always leave the db changed in the cache page of approx. These incorrect page are emptied on the disc later when the cache close or env of db is full.Above is just my guess. If it's just, I want to know when to use 'DB_TXN_NOSYNC' to commit txn, bdb could assure newspaper always rinse before hunting dirty page?
Hi Jerry,
To answer your questions:
1 using the DB_TXN_NOSYNC violates the "write-ahead logging he?"
No DB_TXN_NOSYNC does not violate "write-ahead logging", but the newspaper
No is not synchronous emptied on the validation of the transaction, this means that
transactions can be cancelled during recovery. Indeed, transactions can
do not appear on the disk at all (the database or log file
updated) If an incident occurs.
2. before the Bundesverband deutscher BANKEN evacuates its Sales database pages it is always empty
the journal of the buffer first?
Yes, when a data page is flushed to the disk, that a check is made to determine
If the log record that stores the last modification was emptied.
If not, the newspaper is emptied of memory at least this LSN.
3. what berkeley db updates the database files?
The database cache are emptied on the disk in several circumstances:
If the cache is full then the least recently used page is emptied
to make room for additional pages.
Citing the DB-> sync, DB_ENV-> memp_sync() methods will serve the
cache database:
http://www.Oracle.com/technology/documentation/Berkeley-DB/DB/programmer_reference/am_sync.html
http://www.Oracle.com/technology/documentation/Berkeley-DB/DB/api_reference/C/mempsync.html
As mentioned, the method of DB-> close() empty information cached data to disk.
http://www.Oracle.com/technology/documentation/Berkeley-DB/DB/api_reference/C/dbclose.html
If you use something like the memp_trickle method,
then in this way, a percentage specified pages
in the cache are clean, writing incorrect pages to their
backup of files.
Executes a control point will serve also incorrect pages from the cache
database disk files.
Thank you
Sandra
Tags: Database
Similar Questions
-
My Weblogic 12 c StartWeblogic.cmd failed after that I configured the migration of the cluster to the database with the name of the table as none. I can't even to the Server Admin page.
Before that, I remove the. log.lck, process.id, process.lck files in the nodemanager directory
Help, please! Thank you!
Joe
****************************************************************************
# < October 1, 2015 4:18:20 PM CDT > < Info > < security > < NAP1D692 > <>< Home > <><><>< 1443734300986 > < BEA-090905 > < disable provider JCE CryptoJ self-intégrité for better startup performance. To allow this control, enter - Dweblogic.security.allowCryptoJDefaultJCEVerification = true. >
# < October 1, 2015 4:18:21 PM CDT > < Info > < security > < NAP1D692 > <>< Home > <><><>< 1443734301049 > < BEA-090906 > < change the default Random Number Generator in RSA CryptoJ of ECDRBG128 to FIPS186PRNG. To disable this change, specify - Dweblogic.security.allowCryptoJDefaultPRNG = true. >
# < October 1, 2015 4:18:21 PM CDT > < opinion > < WebLogicServer > < NAP1D692 > <>< Home > <><><>< 1443734301064 > < BEA-000395 > < the following extensions added at the end of the classpath directory content:
C:\oracle\Middleware\Oracle_Home\user_projects\domains\joe12c_domain\lib\log4j-1.2.15.jar; C:\oracle\Middleware\Oracle_Home\user_projects\domains\joe12c_domain\lib\wllog4j.jar. >
# < October 1, 2015 4:18:21 PM CDT > < Info > < WebLogicServer > < NAP1D692 > <>< Thread-4 > <><><>< 1443734301361 > < BEA-000377 > < since Java hotspot 64-bit Server VM WebLogic Server Version 24.60 - b09 of Oracle Corporation. >
# < October 1, 2015 4:18:21 PM CDT > < Info > < management > < NAP1D692 > <>< Thread-5 > <><><>< 1443734301610 > < BEA-141107 > < Version: WebLogic Server 12.1.3.0.0 Wed May 21 18:53:34 PDT 2014 1604337 >
# < October 1, 2015 4:18:22 PM CDT > < opinion > < WebLogicServer > < NAP1D692 > <>< Thread-6 > <><><>< 1443734302702 > < BEA-000365 > < Server State has changed at the START. >
# < October 1, 2015 4:18:22 PM CDT > < Info > < WorkManager > < NAP1D692 > <>< Thread-6 > <><><>< 1443734302702 > < BEA-002900 > < init > self-adjustable thread pool.
# < October 1, 2015 4:18:22 PM CDT > < Info > < WorkManager > < NAP1D692 > <>< ExecuteThread [ASSET]: '0' for the queue: "(self-adjusting) weblogic.kernel.Default" > <><><>< 1443734302733 > < BEA-002942 > < CMM level memory becomes 0. Sleep thread pool to 256. >
# < October 1, 2015 4:18:22 PM CDT > < Info > < WebLogicServer > < NAP1D692 > <>< Thread-6 > <><><>< 1443734302733 > < BEA-000214 > < WebLogic Server "AdminServer" version:
WebLogic Server 12.1.3.0.0 Wed May 21 18:53:34 PDT 2014 1604337 Copyright (c) 1995,2014, Oracle and/or its affiliates. All rights reserved. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < Protocol 't3' is now configured. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < Protocol "t3s" is now configured. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < the 'http' Protocol is now configured. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < the "https" Protocol is now configured. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < Protocol "iiop" is now configured. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < Protocol 'iiops' is now configured. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < "ldap" Protocol is now configured. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < Protocol "ldaps" is now set up. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < Protocol "cluster" is now configured. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < Protocol 'clusters' is now configured. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < the "SNMP" is now configured. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < Protocol "admin" is now configured. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002624 > < administration Protocol is "t3s" and is now configured. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < RJVM > < NAP1D692 > <>< Thread-5 > <><><>< 1443734303264 > < BEA-000570 > < Network Configuration for channel "AdminServer.
Listening address: 7001
Address public n/a
True active http
Tunneling Enabled false
Outgoing Enabled false
Admin traffic enabled true fake license to ResolveDNSName >
# < October 1, 2015 4:18:23 PM CDT > < Debug > < RJVM > < NAP1D692 > <>< Thread-5 > <><><>< 1443734303264 > < BEA-000571 > < retail network for channel "AdminServer.
Weight of the channel 50
Accept the rear 300
Timeout 5000ms
Message Max Size 10000000
Timeout message 60 years
Timeout of 65
Tunneling Timeout 40 s
Tunneling Ping 45 s >
# < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-5 > <><><>< 1443734303279 > < BEA-002609 > < channel Service initialized. >
# < October 1, 2015 4:18:23 PM CDT > < opinion > < Log Management > < NAP1D692 > <>< ExecuteThread [pending]: '1' for the queue: "(self-adjusting) weblogic.kernel.Default" > <><><>< 1443734303357 > < BEA-170019 > < C:\oracle\Middleware\Oracle_Home\user_projects\domains\joe12c_domain\servers\AdminServer\logs\AdminServer.log server log file is opened. All events in the log server-side will be written to this file. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < Log Management > < NAP1D692 > <>< ExecuteThread [pending]: '1' for the queue: "(self-adjusting) weblogic.kernel.Default" > <><><>< 1443734303404 > < BEA-170023 > < logging of the server is initialized with the Java application logging API. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < IIOP > < NAP1D692 > <>< [STANDBY] ExecuteThread: '2' for the queue: "(self-adjusting) weblogic.kernel.Default" > <><><>< 1443734303404 > < BEA-002014 > < subsystem enabled IIOP. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < Log Management > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303404 > < BEA-170025 > < initialized Logging area. Events in the field log will be written to C:\oracle\Middleware\Oracle_Home\user_projects\domains\joe12c_domain\servers\AdminServer\logs/joe12c_domain.log. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < Diagnostics > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303451 > < BEA-320001 > < ServerDebug The service initialized successfully. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < Store > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303513 > < BEA-280008 > < open the persistent store of file 'WLS_DIAGNOSTICS' for recovery: directory = C:\oracle\Middleware\Oracle_Home\user_projects\domains\joe12c_domain\servers\AdminServer\data\store\diagnostics requestedWritePolicy = "Disabled" fileLockingEnabled = true driver = "wlfileio3." >
# < October 1, 2015 4:18:23 PM CDT > < Info > < Store > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303529 > < BEA-280103 > < storage of persistent files "WLS_DIAGNOSTICS" puts in cache in weblogic.store.io.file.direct.FileMapping [granularity = 65536 io mapped =]. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < management > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '2' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303529 > < BEA-141278 > < Java configuration entropy is: property system "java.security.egd = null; File JRE java.security "securerandom.source = file:/dev/urandom" property Blocking of the Config = false; Version of the JDK = 1.7.0_60; Operating system = Windows 7. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < management > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '2' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303545 > < BEA-141280 > < configuration detected NON-BLOCKING of entropy of java. This setting you will give the best performance on machines with limited sources of entropy, but is less secure than a blocking entropy configuration. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < management > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '2' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303545 > < BEA-141187 > < Java System properties are defined as follows:
awt. Toolkit = sun.awt.windows.WToolkit
leader. Encoding = Cp1252
leader. Encoding.pkg = sun.io
leader. Separator =.
Java.awt.graphicsenv = sun.awt.Win32GraphicsEnvironment
Java.awt.PrinterJob = sun.awt.windows.WPrinterJob
Java.class.Path = C:\JDK17~1.0_6\lib\tools.jar; C:\oracle\MIDDLE~1\ORACLE~1\wlserver\server\lib\weblogic_sp.jar; C:\oracle\MIDDLE~1\ORACLE~1\wlserver\server\lib\weblogic.jar; C:\oracle\MIDDLE~1\ORACLE~1\oracle_common\modules\net. SF.antcontrib_1.1.0.0_1-0b3\lib\ant-contrib.jar; C:\oracle\MIDDLE~1\ORACLE~1\wlserver\modules\features\oracle.WLS.common.nodemanager_2.0.0.0.jar; C:\oracle\MIDDLE~1\ORACLE~1\oracle_common\modules\com. Oracle.Cie.config - WLS - online_8.1.0.0.jar; C:\oracle\MIDDLE~1\ORACLE~1\wlserver\common\derby\lib\derbyclient.jar; C:\oracle\MIDDLE~1\ORACLE~1\wlserver\common\derby\lib\derby.jar; C:\oracle\MIDDLE~1\ORACLE~1\wlserver\server\lib\xqrl.jar; C:\oracle\MIDDLE~1\ORACLE~1\wlserver\server\lib\weblogic.jar; C:\Progra~2\IBM\RATION~1\CLEARQ~1\cqjni.jar
Java.class.version = 51.0
Java.endorsed.dirs = C:\JDK17~1.0_6\jre\lib\endorsed; C:\oracle\MIDDLE~1\ORACLE~1\oracle_common\modules\endorsed
Java.ext.dirs = C:\JDK17~1.0_6\jre\lib\ext; C:\Windows\Sun\Java\lib\ext
Java.Home = C:\JDK17~1.0_6\jre
Java.IO.TMPDIR =
Java.Library.Path = C:\JDK17~1.0_6\bin; C:\Windows\Sun\Java\bin; C:\Windows\System32; C:\Windows; C:\oracle\MIDDLE~1\ORACLE~1\wlserver\server\native\win\x64; C:\oracle\MIDDLE~1\ORACLE~1\wlserver\server\bin; C:\oracle\MIDDLE~1\ORACLE~1\oracle_common\modules\org. Apache.ant_1.9.2\bin; C:\JDK17~1.0_6\jre\bin; C:\JDK17~1.0_6\bin; C:\Progra~2\IBM\RATION~1\common; C:\Progra~3\Oracle\Java\javapath; C:\oracle\product\102~1.0\client_1\BIN; C:\Progra~2\BUSINE~1\Common\3.5\bin\NOTES\; C:\Windows\System32; C:\Windows; C:\Windows\System32\wbem; C:\Windows\System32\WINDOW~1\v1.0\; C:\Progra~2\HEAT\;\\nap-lvip-047\scmref\bin; C:\JDK17~1.0_5;\\nap-lvip-047\maven\M3R1SW~N.9\bin; C:\Progra~2\CODECO~1;\\nap-lvip-047\scmref\bin; C:\Windows\System32; C:\Progra~2\IBM\gsk8\lib; C:\Progra~2\IBM\gsk8\bin; C:\Progra~2\IBM\RATION~1\CLEARC~1\Bin; C:\Progra~2\IBM\RATION~1\CLEARC~1\REMOTE~1\cteapis; C:\oracle\MIDDLE~1\ORACLE~1\wlserver\server\native\win\x64\oci920_8;.
Java.naming.Factory.initial = weblogic.jndi.WLInitialContextFactory
Java.naming.Factory.URL.pkgs = weblogic.jndi.factories:weblogic.corba.j2ee.naming.url:weblogic.jndi.factories:weblogic.corba.j2ee.naming.url
Java.Runtime.Name = Java (TM) SE Runtime Environment
Java.Runtime.version = 1.7.0_60 - b19
Java.Security.Policy = C:\oracle\MIDDLE~1\ORACLE~1\wlserver\server\lib\weblogic.policy
Java.Specification.Name = Java Platform API Specification
Java.Specification.Vendor = Oracle Corporation
Java.Specification.version = 1.7
Java.Vendor = Oracle Corporation
Java.vendor.URL = http://Java.Oracle.com/
Java.vendor.URL.bug = http://bugreport.Sun.com/bugreport/
Java.version = 1.7.0_60
Java.VM.info = mixed mode
Java.VM.Name = VM Server Java hotspot 64-Bit
Java.VM.Specification.Name = specification of Machine Java virtual
Java.VM.Specification.Vendor = Oracle Corporation
Java.VM.Specification.version = 1.7
Java.VM.Vendor = Oracle Corporation
Java.VM.version = 24, 60 - b09
javax. Management.Builder.initial = weblogic.management.jmx.mbeanserver.WLSMBeanServerBuilder
javax.rmi.CORBA.PortableRemoteObjectClass = weblogic.iiop.PortableRemoteObjectDelegateImpl
javax.rmi.CORBA.UtilClass = weblogic.iiop.UtilDelegateImpl
org.omg.CORBA.ORBClass = weblogic.corba.orb.ORB
org.omg.CORBA.ORBSingletonClass = weblogic.corba.orb.ORB
OS. Arch = amd64
OS. Name = Windows 7
OS.version = 6.1
Path.Separator =;
Sun.Arch.Data.Model = 64
Sun.Boot.class.Path = C:\oracle\MIDDLE~1\ORACLE~1\oracle_common\modules\endorsed\javax-xml-bind.jar; C:\oracle\MIDDLE~1\ORACLE~1\oracle_common\modules\endorsed\javax-XML-WS.jar; C:\oracle\MIDDLE~1\ORACLE~1\oracle_common\modules\endorsed\jsr250-API.jar; C:\JDK17~1.0_6\jre\lib\resources.jar; C:\JDK17~1.0_6\jre\lib\rt.jar; C:\JDK17~1.0_6\jre\lib\sunrsasign.jar; C:\JDK17~1.0_6\jre\lib\jsse.jar; C:\JDK17~1.0_6\jre\lib\jce.jar; C:\JDK17~1.0_6\jre\lib\charsets.jar; C:\JDK17~1.0_6\jre\lib\jfr.jar; C:\JDK17~1.0_6\jre\classes
Sun.Boot.Library.Path = C:\JDK17~1.0_6\jre\bin
Sun.CPU.endian = little
Sun.CPU.isalist = amd64
Sun.Desktop = windows
Sun.IO.Unicode.Encoding = UnicodeLittle
Sun.java.Command = weblogic. Server
Sun.java.Launcher = SUN_STANDARD
Sun.JNU.Encoding = Cp1252
Sun.Management.Compiler = HotSpot 64 bits compilers Tiered
Sun.OS.patch.Level = Service Pack 1
User.country = en
User.dir = C:\oracle\Middleware\Oracle_Home\user_projects\domains\joe12c_domain
User.Home =
User.language = en
User.Name =
User.TimeZone =
VDE. Home = C:\oracle\Middleware\Oracle_Home\user_projects\domains\joe12c_domain\servers\AdminServer\data\ldap
WebLogic. Name = AdminServer
WebLogic.Home = C:\oracle\MIDDLE~1\ORACLE~1\wlserver\server
WLS. Home = C:\oracle\MIDDLE~1\ORACLE~1\wlserver\server
. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < Store > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303545 > < BEA-280009 > < storing files persistent "WLS_DIAGNOSTICS" (75765a60-c009-403f-a7ed-c6a75a86e1c8) has been opened: blockSize = 512 actualWritePolicy = "Disabled(single-handle-non-direct)" explicitIOEnforced = false files = 25. " >
# < October 1, 2015 4:18:23 PM CDT > < Info > < XML > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303592 > < BEA-130036 > < XMLRegistry initialization >
# < October 1, 2015 4:18:23 PM CDT > < Info > < Socket > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '2' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303662 > < BEA-000436 > < allocate 4 player son. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < Socket > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '2' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303662 > < BEA-000446 > < active native to IO. >
# < October 1, 2015 4:18:23 PM CDT > < Info > < security > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303849 > < BEA-000000 > < OpenJPA starting 1.1.1 - SNAPSHOT >
# < October 1, 2015 4:18:24 PM CDT > < Info > < security > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304005 > < BEA-000000 > < StoreServiceImpl.initJDO - StoreService is initialized with Id = ldap_PyMqKeZifftJZ2SHXoWLnh4Ldn4 = >
# < October 1, 2015 4:18:24 PM CDT > < Info > < security > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304021 > < BEA-090516 > < authenticator provider has already given LDAP. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < security > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304114 > < BEA-090516 > < provider authorized person a pre-existing LDAP data. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < security > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304301 > < BEA-090516 > < CredentialMapper a pre-existing LDAP provider data. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < security > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304317 > < BEA-090516 > < RoleMapper a pre-existing LDAP provider data. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < security > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304379 > < BEA-090093 > < no pre - WLS 8.1 Keystore provider is configured for server security realm myrealm AdminServer. >
# < October 1, 2015 4:18:24 PM CDT > < opinion > < security > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304379 > < BEA-090082 > < security initialization using security realm myrealm. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < connector > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304457 > < BEA-190000 > < J2EE Connector Service initialization. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < connector > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304457 > < BEA-190001 > < Service connector J2EE initialized successfully. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < Store > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304473 > < BEA-280008 > < opening persistent store file '_WLS_AdminServer' for recovery: directory = C:\oracle\Middleware\Oracle_Home\user_projects\domains\joe12c_domain\servers\AdminServer\data\store\default requestedWritePolicy = fileLockingEnabled 'Direct entry' = true driver = "wlfileio3." >
# < October 1, 2015 4:18:24 PM CDT > < Info > < JMX > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '2' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304504 > < BEA-149512 > < JMX connector server started service: jmx:iiop://10.29.11.182:7001/jndi/weblogic.management.mbeanservers.runtime. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304535 > < BEA-040305 > < JMS service is initialized and standby mode. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304567 > < BEA-040090 > < 8 deployed by default connection factories. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304567 > < BEA-040407 > < connection factory default 'DefaultXAConnectionFactory2' with 'weblogic.jms.XAConnectionFactory2' JNDI name is started >.
# < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304567 > < BEA-040407 > < connection factory default 'MessageDrivenBeanConnectionFactory' with 'weblogic.jms.MessageDrivenBeanConnectionFactory' JNDI name is started >.
# < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304567 > < BEA-040407 > < connection factory default 'DefaultConnectionFactory' with 'weblogic.jms.ConnectionFactory' JNDI name is started >.
# < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304567 > < BEA-040407 > < connection factory default 'TopicConnectionFactory' with his "javax.jms.TopicConnectionFactory" JNDI name is started >.
# < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304567 > < BEA-040407 > < connection factory default 'DefaultXAConnectionFactory' with 'weblogic.jms.XAConnectionFactory' JNDI name is started >.
# < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304567 > < BEA-040407 > < connection factory default 'DefaultXAConnectionFactory0' with 'weblogic.jms.XAConnectionFactory0' JNDI name is started >.
# < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304567 > < BEA-040407 > < default connection factory is started 'Factory' with his "javax.jms.QueueConnectionFactory" JNDI name >.
# < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304567 > < BEA-040407 > < connection factory default 'DefaultXAConnectionFactory1' with 'weblogic.jms.XAConnectionFactory1' JNDI name is started >.
# < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304567 > < BEA-040306 > < JMS service is now active. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < JMX > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304629 > < BEA-149512 > < JMX connector server started service: jmx:iiop://10.29.11.182:7001/jndi/weblogic.management.mbeanservers.domainruntime. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < Store > < NAP1D692 > < AdminServer > < ExecuteThread [ASSETS]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304676 > < BEA-280009 > < file persistent store "_WLS_AdminServer" (c54c7ab9-2eab-4095-ba3c-5abb38f06231) has been opened: blockSize = 512 actualWritePolicy = "Direct-Write(read-buffered)" explicitIOEnforced = false documents = 21. " >
# < October 1, 2015 4:18:24 PM CDT > < Info > < JMX > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304691 > < BEA-149512 > < JMX connector server started service: jmx:iiop://10.29.11.182:7001/jndi/weblogic.management.mbeanservers.edit. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < JDBC > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304769 > < BEA-001135 > < init > the JDBC service.
# < October 1, 2015 4:18:24 PM CDT > < Info > < JDBC > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304785 > < BEA-001137 > < full initialization >.
# < October 1, 2015 4:18:24 PM CDT > < Info > < JDBC > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304785 > < BEA-001138 > < Recovery > JDBC service.
# < October 1, 2015 4:18:24 PM CDT > < Info > < JDBC > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304785 > < BEA-001140 > < complete resume >.
# < October 1, 2015 4:18:24 PM CDT > < Info > < messaging.interception > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304816 > < BEA-400000 > < initialization message interception service. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < Server > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304863 > < BEA-002622 > < Protocol "[https, t3, snmp, cluster-broadcast-secure, ldaps, cluster-broadcast, ldap, http, iiop, admin, t3s '. "[, iiops]" is now set up. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < HTTP > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304863 > < BEA-101128 > < HTTP initialization services. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < HTTP > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304894 > < BEA-101135 > < AdminServer is the default Web server. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < HTTP > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304894 > < BEA-101052 > < [HttpServer (defaultWebserver) name: AdminServer] Initialized >
# < October 1, 2015 4:18:24 PM CDT > < Info > < HTTP > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304894 > < BEA-101129 > < init > the container of the Web application.
# < October 1, 2015 4:18:24 PM CDT > < Info > < JMX > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304972 > < BEA-149513 > < JMX Connector Server stopped serving: jmx:iiop://10.29.11.182:7001/jndi/weblogic.management.mbeanservers.edit. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < JDBC > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304988 > < BEA-001144 > < Force suspending the JDBC service. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < JDBC > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304988 > < BEA-001146 > < Force suspend completed JDBC service >.
# < October 1, 2015 4:18:24 PM CDT > < Info > < JDBC > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304988 > < BEA-001147 > < JDBC service stop. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < JDBC > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304988 > < BEA-001149 > < stopping the JDBC service performed. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < JMX > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304988 > < BEA-149513 > < JMX Connector Server stopped serving: jmx:iiop://10.29.11.182:7001/jndi/weblogic.management.mbeanservers.domainruntime. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < MessagingBridge > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304988 > < BEA-200001 > < messaging bridge has shut down successfully. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304988 > < BEA-040308 > < service JMS suspends >.
# < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304988 > < BEA-040107 > < 8 cancelled by default connection factories. >
# < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304988 > < BEA-040015 > < stop JMS is done >.
# < October 1, 2015 4:18:24 PM CDT > < Info > < JMX > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304988 > < BEA-149513 > < JMX Connector Server stopped serving: jmx:iiop://10.29.11.182:7001/jndi/weblogic.management.mbeanservers.runtime. >
# < October 1, 2015 4:18:24 PM CDT > < critical > < WebLogicServer > < NAP1D692 > < AdminServer > < principal > < < WLS Kernel > > <><>< 1443734304988 > < BEA-000362 > <Server has failed. Reason: at least a migratable target is configured with automatic migration. Before the automatic migration of any type can be used, the MigrationBasis must be defined in the ClusterMBean. If database is chosen, must be set so DataSourceForAutomaticMigration. >
# < October 1, 2015 4:18:25 PM CDT > < opinion > < WebLogicServer > < NAP1D692 > < AdminServer > < principal > < < WLS Kernel > > <><>< 1443734305003 > < BEA-000365 > < Server state changed to FAILED. >
# < October 1, 2015 4:18:25 PM CDT > < error > < WebLogicServer > < NAP1D692 > < AdminServer > < principal > < < WLS Kernel > > <><>< 1443734305003 > < BEA-000383 > < is not an essential service. The server shuts itself down. >
# < October 1, 2015 4:18:25 PM CDT > < opinion > < WebLogicServer > < NAP1D692 > < AdminServer > < principal > < < WLS Kernel > > <><>< 1443734305003 > < BEA-000365 > < Server state has changed to FORCE_SHUTTING_DOWN. >
# < October 1, 2015 4:18:25 PM CDT > < Info > < WebLogicServer > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734305003 > < BEA-000236 > < stop run > discussions.
# < October 1, 2015 4:18:25 PM CDT > < Info > < WebLogicServer > < NAP1D692 > < AdminServer > < principal > < < WLS Kernel > > <><>< 1443734305003 > < BEA-000238 > < judgment made. >
It may sound crazy that I am answering my own post. As he complains about MigrationBasis. I tried to go to the config.xml file and changed
Cluster-0 unicast database TO
Cluster-0 unicast consensus And at least I was able to restart Server Admin and go to the Server Admin page. The Cluster-> Configuration-> Migration is always on view from database as the basis for Migration.
Joe
-
Hi all
I have a view object with a query that uses a variable binding. I drag the data on my .jsf page control to create a table. I create a query method on a bean in sight. The query method uses the content of one of the attributes of the bean to set the link for the query variable:
vo.setNamedWhereClauseParam ("CraIdBindVar", sessionBean.getCraId ());
I put a button on the page that calls the method of the request and it fills the table. That's fine, but I don't want the user to have to click the "query" button when browsing this page. I found forums dealing with create an AMImpl.jave method, create a link on the page, create an executable file for the link. It works that the method is executed until the page appears. However, the AMImpl method cannot call sessionBean.getCraid () to obtain the data required to complete the binding variable.
Is it possible to run my method of view range bean before the page is displayed? Or maybe a way for the AMImpl.java method to access the range of view variable?
Thank you, SteveSteve,
You can drag a call method on the workflow activity. Select the new method call activity, and open the property inspector. Here you choose your bean method in the method property. Now, first of all, you go to this activity of method call, then the page.Timo
-
Help with excel import and delete the page script
Hello. I will try to make it as simple as possible. I have some data from excel (saved as delimited by tabs) that I need to import in a 5 PDF page. I use the script below to import, and it works fine. All import fields and records the individual (one for each record) PDF. However, I need to extend this functionality by removing some pages before it saves the document by looking at the different boxes. The code below is what I use to import the records.
// specify the filename of the data file var fileName = "/Users/MacMike/Desktop/Test.txt"; // the tab delimited text file containing the data var outputDir = "/Users/MacMike/Desktop/Dump/"; // make sure this ends with a '/' var err = 0; var idx = 0; while (err == 0) { err = this.importTextData(fileName, idx); // imports the next record if (err == -1) app.alert("Error: Cannot Open File"); else if (err == -2) app.alert("Error: Cannot Load Data"); else if (err == 1) app.alert("Warning: Missing Data"); else if (err == 2) app.alert("Warning: User Cancelled Row Select"); else if (err == 3) app.alert("Warning: User Cancelled File Select"); else if (err == 0) { this.saveAs(outputDir + this.getField("Full Name (First Last)").value + "-" + this.getField("Event Title").value + ".pdf"); // saves the file idx++; } }
As I said before you import works surprisingly well.
My PDF consists of 5 pages (info-registration, p1 = Dir-contract = p0, p2 = contract ndarp-brand, p3 = takes-contract, p4 = agreement must be brand). My idea is that on the import of data, the script will look at a few check boxes and determine which contracts to remove on the PDF and then save. I wrote the syntax of which, in my view, what it should look like. I'm not a programmer and know just a little bit. I looked through the documentation and this is what I came with. I don't know how to combine to work. Here's the code I came up with that.
var dir = this.getField("Associate Director"); // checkbox var aldir = this.getField("Alumni Director"); // checkbox var fac = this.getField("Facilitator"); // checkbox var alfac = this.getField("Alumni Facilitator"); // checkbox var oyb = this.getField("Optimize Your Brain"); //checkbox var poyb = this.getField("DVD and Workbook Previously Purchased"); // checkbox // Below are all the possible training options. if (dir.value=="Checked" || aldir.value=="" || fac.value=="" || alfac.value=="" || oyb.value=="" || poyb.value=="") { this.deletePages({nStart:3, nEnd:4}) } else if (dir.value=="" || aldir.value=="Checked" || fac.value=="" || alfac.value=="" || oyb.value=="" || poyb.value=="") { this.deletePages({nStart:3, nEnd:4}) } else if (dir.value=="" || aldir.value=="" || fac.value=="Checked" || alfac.value=="" || oyb.value=="" || poyb.value=="") { this.deletePages({nStart:2, nEnd:4}) } else if (dir.value=="" || aldir.value=="" || fac.value=="" || alfac.value=="Checked" || oyb.value=="" || poyb.value=="") { this.deletePages({nStart:2, nEnd:4}) } else if (dir.value=="" || aldir.value=="" || fac.value=="Checked" || alfac.value=="" || oyb.value=="Checked" || poyb.value=="") { this.deletePages({nStart:2, nEnd:2}) } else if (dir.value=="" || aldir.value=="" || fac.value=="" || alfac.value=="Checked" || oyb.value=="Checked" || poyb.value=="") { this.deletePages({nStart:2, nEnd:2}) } else if (dir.value=="" || aldir.value=="" || fac.value=="Checked" || alfac.value=="" || oyb.value=="" || poyb.value=="Checked") { this.deletePages({nStart:2, nEnd:2}) } else if (dir.value=="" || aldir.value=="" || fac.value=="" || alfac.value=="Checked" || oyb.value=="" || poyb.value=="Checked") { this.deletePages({nStart:2, nEnd:2}) } else if (dir.value=="Checked" || aldir.value=="" || fac.value=="" || alfac.value=="" || oyb.value=="Checked" || poyb.value=="") { this.deletePages(none) // I realize this is incorrect. Just showing that this option results in no deleted pages. } else if (dir.value=="" || aldir.value=="Checked" || fac.value=="" || alfac.value=="" || oyb.value=="Checked" || poyb.value=="") { this.deletePages(none) // I realize this is incorrect. Just showing that this option results in no deleted pages. } else if (dir.value=="Checked" || aldir.value=="" || fac.value=="" || alfac.value=="" || oyb.value=="" || poyb.value=="Checked") { this.deletePages(none) // I realize this is incorrect. Just showing that this option results in no deleted pages. } else if (dir.value=="" || aldir.value=="Checked" || fac.value=="" || alfac.value=="" || oyb.value=="" || poyb.value=="Checked") { this.deletePages(none) // I realize this is incorrect. Just showing that this option results in no deleted pages. } else if (dir.value=="" || aldir.value=="" || fac.value=="" || alfac.value=="" || oyb.value=="Checked" || poyb.value=="") { this.deletePages({nStart:1, nEnd:2}) } else (dir.value=="" || aldir.value=="" || fac.value=="" || alfac.value=="" || oyb.value=="" || poyb.value=="Checked") { this.deletePages({nStart:1, nEnd:2}) }
How to combine these two so that I can create a document temp import my data, check the boxes to check off and delete the appropriate pages and save the file and then go to the next record? I got the first part done. It imports large and has the right, but I don't know what to do next. Thanks for any help!
Or y at - it another way to do this?
MichaelWow. Ok. I had it works beautifully. There was a lot of trial and error. Because the script as it was would have, would open the original PDF, delete the pages needed, then save the file. While it would be to go to the next record is missing pages in PDF and bomb to open. I hunted and searched for a way to do this. I found "this.insertPages" in the documentation. Finally, what worked was so move the "save under" in the service and put it under every variation of check. So now when checking the boxes, he performs the check, removes the mandatory pages, stops, insertions of back in deleted pages from the original file, leave the service and finally goes to the next record.
Here is my final script:
// This code looks at an excel (tab delimited) file, imports the records into a PDF form 10 Pages long. // Then checks a series of checkboxes and deletes the pages that aren't associated with first page. // After it deletes these pages it reinserts the deleted pages so it can do the checks for the next record in the (tab delimited) file. // variables for importing excel data var err = 0; var idx = 0; var fileName = "/Users/MacMike/Desktop/Test.txt"; // the tab delimited text var outputDir = "/Users/MacMike/Desktop/Dump/"; // make sure this ends with a '/' //Checking a bank of 6 checkboxes and determine which pages need to be deleted, save the file, and the insearch the deleted pages again. function seekandDestroy() { if (dir.value=="Checked" && aldir.value=="Off" && fac.value=="Off" && alfac.value=="Off" && oyb.value=="Off" && poyb.value=="Off") { this.deletePages({nStart:6, nEnd:9}) this.saveAs(outputDir + this.getField("Full Name (First Last)").value + "-" + this.getField("Event Title").value + ".pdf") this.insertPages({nPage:5, cPath:"/Users/MacMike/Desktop/TT Reg & Contracts.pdf", nStart:6, nEnd:9 }); } else if (dir.value=="Off" && aldir.value=="Checked" && fac.value=="Off" && alfac.value=="Off" && oyb.value=="Off" && poyb.value=="Off") { this.deletePages({nStart:6, nEnd:9}) this.saveAs(outputDir + this.getField("Full Name (First Last)").value + "-" + this.getField("Event Title").value + ".pdf") this.insertPages({nPage:5, cPath:"/Users/MacMike/Desktop/TT Reg & Contracts.pdf", nStart:6, nEnd:9 }); } else if (dir.value=="Off" && aldir.value=="Off" && fac.value=="Checked" && alfac.value=="Off" && oyb.value=="Off" && poyb.value=="Off") { this.deletePages({nStart:3, nEnd:9}) this.saveAs(outputDir + this.getField("Full Name (First Last)").value + "-" + this.getField("Event Title").value + ".pdf") this.insertPages({nPage:2, cPath:"/Users/MacMike/Desktop/TT Reg & Contracts.pdf", nStart:3, nEnd:9 }); } else if (dir.value=="Off" && aldir.value=="Off" && fac.value=="Off" && alfac.value=="Checked" && oyb.value=="Off" && poyb.value=="Off") { this.deletePages({nStart:3, nEnd:9}) this.saveAs(outputDir + this.getField("Full Name (First Last)").value + "-" + this.getField("Event Title").value + ".pdf") this.insertPages({nPage:2, cPath:"/Users/MacMike/Desktop/TT Reg & Contracts.pdf", nStart:3, nEnd:9 }); } else if (dir.value=="Off" && aldir.value=="Off" && fac.value=="Checked" && alfac.value=="Off" && oyb.value=="Checked" && poyb.value=="Off") { this.deletePages({nStart:3, nEnd:5}) this.saveAs(outputDir + this.getField("Full Name (First Last)").value + "-" + this.getField("Event Title").value + ".pdf") this.insertPages({nPage:2, cPath:"/Users/MacMike/Desktop/TT Reg & Contracts.pdf", nStart:3, nEnd:5 }); } else if (dir.value=="Off" && aldir.value=="Off" && fac.value=="Off" && alfac.value=="Checked" && oyb.value=="Checked" && poyb.value=="Off") { this.deletePages({nStart:3, nEnd:5}) this.saveAs(outputDir + this.getField("Full Name (First Last)").value + "-" + this.getField("Event Title").value + ".pdf") this.insertPages({nPage:2, cPath:"/Users/MacMike/Desktop/TT Reg & Contracts.pdf", nStart:3, nEnd:5 }); } else if (dir.value=="Off" && aldir.value=="Off" && fac.value=="Checked" && alfac.value=="Off" && oyb.value=="Off" && poyb.value=="Checked") { this.deletePages({nStart:3, nEnd:5}) this.saveAs(outputDir + this.getField("Full Name (First Last)").value + "-" + this.getField("Event Title").value + ".pdf") this.insertPages({nPage:2, cPath:"/Users/MacMike/Desktop/TT Reg & Contracts.pdf", nStart:3, nEnd:5 }); } else if (dir.value=="Off" && aldir.value=="Off" && fac.value=="Off" && alfac.value=="Checked" && oyb.value=="Off" && poyb.value=="Checked") { this.deletePages({nStart:3, nEnd:5}) this.saveAs(outputDir + this.getField("Full Name (First Last)").value + "-" + this.getField("Event Title").value + ".pdf") this.insertPages({nPage:2, cPath:"/Users/MacMike/Desktop/TT Reg & Contracts.pdf", nStart:3, nEnd:5 }); } else if (dir.value=="Off" && aldir.value=="Off" && fac.value=="Off" && alfac.value=="Off" && oyb.value=="Checked" && poyb.value=="Off") { this.deletePages({nStart:1, nEnd:5}) this.saveAs(outputDir + this.getField("Full Name (First Last)").value + "-" + this.getField("Event Title").value + ".pdf") this.insertPages({nPage:0, cPath:"/Users/MacMike/Desktop/TT Reg & Contracts.pdf", nStart:1, nEnd:5 }); } else if (dir.value=="Off" && aldir.value=="Off" && fac.value=="Off" && alfac.value=="Off" && oyb.value=="Off" && poyb.value=="Checked") { this.deletePages({nStart:1, nEnd:5}) this.saveAs(outputDir + this.getField("Full Name (First Last)").value + "-" + this.getField("Event Title").value + ".pdf") this.insertPages({nPage:0, cPath:"/Users/MacMike/Desktop/TT Reg & Contracts.pdf", nStart:1, nEnd:5 }); } else if (dir.value=="Checked" && aldir.value=="Off" && fac.value=="Off" && alfac.value=="Off" && oyb.value=="Checked" && poyb.value=="Off") { this.saveAs(outputDir + this.getField("Full Name (First Last)").value + "-" + this.getField("Event Title").value + ".pdf") } else if (dir.value=="Checked" && aldir.value=="Off" && fac.value=="Off" && alfac.value=="Off" && oyb.value=="Off" && poyb.value=="Checked") { this.saveAs(outputDir + this.getField("Full Name (First Last)").value + "-" + this.getField("Event Title").value + ".pdf") } else if (dir.value=="Off" && aldir.value=="Checked" && fac.value=="Off" && alfac.value=="Off" && oyb.value=="Checked" && poyb.value=="Off") { this.saveAs(outputDir + this.getField("Full Name (First Last)").value + "-" + this.getField("Event Title").value + ".pdf") } else if (dir.value=="Off" && aldir.value=="Checked" && fac.value=="Off" && alfac.value=="Off" && oyb.value=="Off" && poyb.value=="Checked") { this.saveAs(outputDir + this.getField("Full Name (First Last)").value + "-" + this.getField("Event Title").value + ".pdf") } } // Imports records does the above function then go the next record, all the while doing error reporting. while (err == 0) { err = this.importTextData(fileName, idx); // imports the next record if (err == -1) app.alert("Error: Cannot Open File"); else if (err == -2) app.alert("Error: Cannot Load Data"); else if (err == 1) app.alert("Warning: Missing Data"); else if (err == 2) app.alert("Warning: User Cancelled Row Select"); else if (err == 3) app.alert("Warning: User Cancelled File Select"); else if (err == 0) { var dir = this.getField("Associate Director"); // checkbox var aldir = this.getField("Alumni Associate Director"); // checkbox var fac = this.getField("Facilitator"); // checkbox var alfac = this.getField("Alumni Facilitator"); // checkbox var oyb = this.getField("Optimize Your Brain Site Coordinator"); //checkbox var poyb = this.getField("DVD and Workbook Previously Purchased"); // checkbox seekandDestroy(dir, aldir, fac, alfac, oyb, poyb); //performs the above function idx++; //goes to next record } }
-
There is a yellow square with a question mark on the FireFox OPTIONS / settings page.
If the mouse enters it, it reacts like it is something to click, but no indication that it is.
Is it supposed to be there and if so, why?
He has a POINT of MARK BLACK inside the small SQUARE of YELLOW.
Any help is appreciated.This is the help screen. Press the key.
-
Problems with lack of usability of the Pages 5.6.1
After having resisted for a long time, I've finally upgraded to Pages 5.6.1/El Capitan for the writing of my thesis, and I hate so much. I can see that it would be good for pretty things, but for text-heavy work, it's hopeless. Having had my rants, please can someone tell me if it is possible to get the old bar along the bottom back - the one with the number of words and figures of the page displayed in the blink of an eye? Also, the new comment system is formidable - is it possible to fix the new component and stop wandering around on its own and change the view so what you see is your comment permanently in the sidebar (not an irritating sticker on the text) without so much space wasted on the who/where/when to its insertion? Thank you!
Hi Cecil,.
To answer question 1:
is it possible to get the bar of the old along the back bottom - with the number of words and figures of the page displayed in the blink of an eye
Pages 5 has a number of words of window (click view in the toolbar) that you can drag anywhere you like:
Click Word count up/down arrows to choose a screen:
Kind regards
Ian.
Edit: Page numbers can be in a header or a footer.
-
CSS Rollover Menu with pictures and witness to the Page class
Hello.
I found a very interesting video here: http://www.youtube.com/watch?v=vv8cRYGCvIY on creating a CSS Menu Rollover with Images and indicator of current Page (I tested it and it works fine).
I have a web site with 15 pages based on a template, and I want to use this sample video to do the same thing on my website.
Please tell me if I can use the sample from the link above to do so.
What should I change in the css file (which new class should I do) so that it works on a web site based on a template?
Thank you!
I don't know about this video tutorial, but an indicator of menu persistent at the level of the site ("you are here" highlighting) is easy to do with CSS classes.
Details and examples of code below:
http://ALT-Web.com/articles/persistent-page-indicator.shtml
Nancy O.
ALT-Web Design & Publishing
Web | Graphics | Print | Media specialists
http://ALT-Web.com/
http://Twitter.com/ALTWEB -
Boot Manager Windows problem asit always starts with a selective startup under the Startup tab
Whenever I start my laptop I get Windows boot manager options in which it highlights the option of windows 7 and I have to press Enter and continue with this option selected.
I tried to change my boot options in msconfig, but once again the configuration back to selective Starup of Normal startup. Also I disabled some startup applications, but even changes are not get saved when I restart the system after changes. My touchpad no longer works between the two, and then it starts to work. My left and right keyboard arrows keys do not work.
My change in normal startup is get back on selective startup.
Please help me to solve these issues.
Hello
It is very possible that this is for the reason that you have corrupted files on your system. System File Checker will scan your system for the missing, corrupt or damaged files. In addition, it will try to correct them. If you have changed the important system files, System File Checker will be - make sure you make backups of them!
How to run the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html
I would also recommend that you run the Startup Repair to the problems that Windows may be displayed when you start your computer.
How to run the Startup Repair tool
http://Windows.Microsoft.com/en-GB/Windows7/products/features/Startup-Repair
Thank you
Legaede
-
My laptop has two 2 750 GB HDD (plus a 8 GB SSD Express Cache). The first HARD disk is partitioned into 2 letters two logical sectors (~ 275 GB & 375 GB {more system/recovery NTFS partitions 2}), assigned drive C (main system partition), and D (logical partition) and the second physical disk E (750 GB). Win7Pro64 created a pagefile managed system on the C drive, but not on readers D & E. Y has an advantage, or more importantly, a disadvantage to the creation of swap files on the D & E readers?
I am not opposed to using all the 375GB logical partition on drive D as a swap file if this can help performance, and/or create a pagefile on the E drive the same size as on the C drive, once again, to help performance.
Can someone help me with the best approach?
Also, I have an Intel i7-3610QM with 16 GB of RAM and a GPU Nvidia GeForce GTX G675M with 2 GB of RAM.
Thank you.
Hello
The best option is to let Windows control the pagefile.
Here's more information: http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/optimal-page-file-size/3c68f053-1248-48c9-bd10-72874834d595
I hope this helps.
-
Someone at - it experience with HTML 5 video on the pages of BC?
HTML 5 video controls problems
For some reason that I can't show my HTML5 video player controls, can see you them?
http://www.democracyinstitute.org/VIDEO2
My operating system is windows 8 and all my browsers are up to date.
I had a conversation with Varun Kalra Wed live chat, 10/12/2014, and he posted a simple HTML5 video link and his video works well on all my browsers.
http://www.varunkalra.TK/html5test.htmlI use his sample code to post my sample video and I still don't see my player controls. What I am doing wrong?
PromoMusic
You have no controls setting in your markup. If you had it in your markup and you try to paste the code using the editor in the admin rather then software coding or the region to develop (top), then it will happen.
The editor is old (coming nine) and cannot handle html elements 5 like that.
commands = 'true' must work if this is the case, if you just missed the parameter controls by mistake well just put that back in.
-
Problems with firefox, slideshow freezes before the last image
Hello
I use muse for the first time, the site is up and running on this page in Firefox V37.0.1 the slide show hangs before the end, so is not in the loop, it works very well in Safar/Chrome/UI and seems to work correctly on Firefox/Chrome/PC does anyone know a solution, difficulty, workaround, or is it just my Mac sends me some grief.
The site includes several other slideshows that all work very well. It's that sends help commuting problems
I deleted the cache/history... and it has not solved the problem.
Any help is appreciated!
See you soon
Phil
I tested it on Mac/Firefox, but do not see the same question that it works very well on my end:
https://www.dropbox.com/s/3a92tb5kqlr7lpl/Firefox.swf?DL=0
I suggest you to reset the preferences of the browser:
Reset the preferences of Firefox to troubleshoot and resolve problems. Firefox help
Thank you
Sanjit
-
Return with incorrect serial number facility
Try installing Acrobat X Pro to a new computer with window 8.1.
With serial number of my products. Always returns with incorrect serial number.
You probably may need to contact the Support from Adobe. Sounds like a problem with the license, then you can try this KB: error of incorrect serial number
-
Don't boot to desktop-Boot computer ups always come with "no input signal" for monitor
Thanks for the research on this issue. So first of all, he could start after a few attempts in the end goes to the blue screen error at approx. 5 min. I started this path several times that in "safe mode with network" to try the many suggestions of repair for two days. " At this point, it's freezing just at "windows is loading files", but probably will go to blue screen error. Boot ups always come with "no input signal" for the monitor and signal switching in the Help menu for 5 min periods I've mentioned and then fails or "monitor going to sleep" occurs.
The error messages rec'vd: corrupted image, corrupted file and header file check sum does not match the sum of computer control. The recommendations of the screen blue: disable the BIOS memory, any material current or drivers and check disk space.
Some tent to fix: memory diagnostics and it showed 'no problem', checked monitor on another computer and it works, in a session of 5 min a download to 'fix' Microsoft via a USB problem like "search of windows crashes" but was 'unable to set', a few other attempts would show the "windows installer has stopped working" preventing any action.
At the present time, am unable to start even with advanced at F8 options. It's HP Pavilion 10/2007, with the help of HP. Its on a wireless network with a netbook, Blu - ray, occasionally a cell phone that works on windows live but none presents as a device.
Hello
· You did changes to the computer before the show?
· What is the exact error message that you receive?
Method 1: Remove the external devices except the keyboard and mouse and try to restart the computer in safe mode and check if you can start inside.
If you are able to boot into safe mode then try a restore of the system it and check if it helps solve the problem:
http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
Method 2: I suggest you do a system recovery options system restore and see if it helps:
Method 3: If the system restore does not help then do a startup repair and check if this solves the problem.
http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions
-
How to display decimal numbers with elements of the page?
Hey everybody,
I work with APEX 4.2. I have a page with an element (element of the page displayed in the text field).
This point of displays the values the database. If the value in the database is "0.5" item only shows that ", 5" instead of "0.5".
I tried it already as digital point. Can someone help me?
Your article is using data column?
Otherwise, data recovery process:
Select to_char (number_value, '990.0')
in: point
table;
-
I cann't open exe file when I open always open with adobe reader.when I uninstall adobe reader my exe file work but I still need adobe for my pc.
Hello
read this and see if this solves your problem
http://www.Winhelponline.com/blog/restore-exe-file-Asso-Windows-7-Vista-incorrectly-associated/
Maybe you are looking for
-
replace non grip load printer Cannon or download 3rd driver?
Any recommendation on the question of whether I would be better to buy a new portable printer compact or try to download a Gutenprint driver that would apparently make the old unsupported Canon iP90 printer is usable again. The Gutenprint sounds fai
-
bog of dialogue "save under" in FF19 is invisible
When I click on "Save as", the browser window is more developed, but no Save dialog box is visible. If I hit enter, it will beep. But if I click outside of the browser, then back on it (FF), THEN I hit enter, backups of files, even if I can't change
-
Access to the e-mail of Motorola Bravo
I changed my yahoo email password online. I get an e-mail authentication error on my Motorola Bravo now and I can't access my email from the phone. Any suggestions on what I need to do to fix this?
-
Hi all I have a voltage source and a force as entries in a sensor module DAQ 9234. The software focuses both signals whenever they change. For example, if the voltage is read by data acquisition increases up to a constant value, the software will tra
-
Recently, I get these pop-ups Windows Update indicating that I have to restart my computer. I checked to see what updates are being installed, but Windows Update won't disclose. I spoke with my system administrator, and we discovered that an update