Session of visa driver looping issue

Similar Questions

• VISA-driver not send string COM port first, if there are odd bytes

  VISA-driver sends no COM port string first, if there are odd bytes

  Hello!!!

  Thank you very much for the help.

  I'm sorry, but I can't play this situation, I ask. Maybe I use another cRio, or may be I am wrong. I don't know why, but all workers,

  I'm sorry and thank you once again.

• Error: open the-1073807300, probably because of several sessions of VISA. How to close all?

  I have a simple vi that takes a reading of a picoammeter, using the instrument-specific sub-vis. I guess I'm the new opening VISA sessions each time I run it. Recently I get the 1073807300 error: not enough system resources to perform the necessary memory allocation. I tried to add a close command, but I still think I have VISA open sessions.

  Any suggestions on how to close will be much appreciated!

  Is attached to the original vi (picoamm_1) and initialization void / vi if it can help.

  It's all wrong. First of all, you don't have control of IVI resource name. It's the wrong class. Right-click on the entry of the initialize function and select "Create Control". Second, you don't close the IVI sessions because you have wired it correctly. This shift register is just ridiculous. Do NOT wire your control in the loop and return. You want the reference to the session of the function of the loop of wire at the Close function which is in the driver. As it is to wire the session, the loop will be autoindex in a table. Just right click on the exit tunnel and select 'disable indexing. "

• External hard drive mounting issues on MacOS Sierra

  After upgrading to OS Sierra, I found that my USB3 drives, directly connected to my iMac end of 2012, turn off at startup. USB 2 disks are unaffected and connect properly. The only way to access my USB3 disks is to disconnect and reconnect every time I start the computer, then they are ok. I tried to reset the NVRAM, but it did not work. I found Os El Capitan until this issue is resolved.

  Do not mount or actually turns out always the system start? It was not clear in your subject line and content later, what was going on.

  Are they NTFS formatted drives? See the solutions frequently asked and answered forum if they are.

• Restart the external drive loop

  I'm trying to downgrade an old MacBook 13 inch (unibody), it's current run 10.11, but decided it was too system for the small laptop. Swap on the HD for those who had 10.5 and it would just keep restarting. I tried even to remove the HD and reboot only with the 10.2 installation disc and it would always be in the loop. Only time where it works properly is with 10.11 back in HD.

  It's very unusual, because I have no memory of this never happens with other OS.

  You need the original Installer 1 disc that came with the computer or a 10.6.3 retail DVD of Snow Leopard. Then follow these instructions:

  Snow Leopard erase and install

  1. Insert the Snow Leopard DVD in the optical drive and restart the computer.
  2. Immediately after hearing the chime hold down the C key.
  3. Release the button when the Apple logo appears and wait for loading to complete.
  4. After the installer loads, choose your language and click on the continue button. When the menu bar appears select utility drive in the Utilities menu.  After disk utility charges select the entry out-bumpy in the list aside (mfgr. size ID and disc drive.)  In the right side of the disk utility window, click the Partition tab.  Set the number of sheets to (1) on the menu drop down. Click the Options button and select GUID, click on OK, the value of the Mac OS Extended journaled format type. Finally, click on the apply button.
  5. Once the format is complete, quit disk utility.  Continue with the installation of OS X and follow the directions.
  6. Once installation is complete, the computer will restart in the installation wizard. After completing the Setup Wizard, you will use a new installation of Snow Leopard. Open the software update and install updates recommended.
  7. If you plan to sell or to give to your remote computer, then proceed as follows: once you reformat your hard disk and reinstall Snow Leopard, the computer restarts with a welcome screen. To leave the Mac in a State OOTB (Out Of The Box), do not continue with the Setup program. Instead, press the command and Q keys to stop the computer. The installation wizard will guide you the new owner through the installation procedure, after that it turns on the computer.
  8. Download and install Mac OS X 10.6.8 v1.1 updated Combo. If necessary. It is not necessary if you are selling or giving your computer away.

  [Permission to use any part of the foregoing has been granted by khati, exclusively, to theratter.]

  You can now switch to any version of Mac OS X that you have already downloaded from the App Store. They must appear on the purchase page of the App Store when you connect using the Apple ID used when downloading of their origin. Your model is the first of its kind to run Lion or later. You can stay with Snow Leopard for best performance. However, the model is quite able to run than el Capitan provided that it has enough memory installed - at least 4 GB.

• GPIB-USB-HS shows no MAX after that I used the wizard NI VISA DRIVER

  I accessed GPIB USB HS in the MAX software. As I was not able to communicate NF RLC remotely, so I tried Wizard DRIVER VISA OR according to tutorial Assistant pilot NI VISA , however, thnings went wrong and I am not able to see same GPIB to the MAX software now. What should I do now?

  The first picture below shows the GPIB USB HS as shown in the software MAX and the other image shows no GPIB USB HS.

  

  

  Yet once I installed driver USB GPIB link below:

  http://www.NI.com/download/NI-488.2-15.0/5427/en/

  Its working fine now.

  Thank you.

• I can't install VISA driver and driver USB GPIB on my PC with VISTA... help me...

  I have LabVIEW7 and VISTA, it's ok, but I can't install the driver VISA and USB GPIB driver on my pc... it is necessary to connect my pc with instruments? Or LabVIEW7 have this files? Thank you

  Véronique.

  LabVIEW 7 is not supported on Vista and the version of NI-VISA supplied with LabVIEW 7 is not supported. You can download the latest version of NI-VISA - I ALREADY GAVE the link for you.

• VISA driver on the connection type unknown

  I can't be the only person having this problem in LabVIEW and I have not worked on the solution.

  Let's say for example I write a driver for a power supply, this device is off the shelf, but the manufacturer provided driver is *!

  Instrument is connected through GPIB. in this case.

  3 months later, I would like to re - use the driver but due to the implcations cost I can not have the flavor of the instrument GPIB and need the RS232 version, so I re - write the pilot so that all the functions of R/W are shrouded by a VI using the right process for the reading of serial ports if a RS232 device and repeat the initialization of the process too.

  3 months later I get my hands on a USB version of the PSU - he uses the style GPIB code and does not take long to change.

  The question is this:

  Is it all as anyone knows (alias VISA ignoring) that will allow me to determine the physical to the PSU from the PC connection, if someone changes and therefore to use the correct part of the code driver to initialize and communicate with the power supply.

  Specifying the Intf Type is a fix SW for a HW problem that causes more problems if the connection is changed, how can I allow someone to use RS232/USB/GPIB and detect the connection type myslef in LabVIEW, before making a * IDN and the harbor onpen?

  Thanks in advance for any ideas

  James

  Have you looked at all the drivers NOR? The example of the expedition of the Agilent 34401 is sufficient. In the Initialize function, there is a test to see if the resource VISA is a serial port. The case statement for the true condition sets up the port. There is no other changes such as GPIB, USB connection or Ethernet works exactly the same way.

• Impossible to install NI-VISA Driver under Windows 7

  Hi all

  Software isn't exactly my strength, so I apologize if this question is badly phrased or trivial.

  I am trying to use NI-VISA 4.6 to create a driver for a USB mouse.  My ultimate goal is to read the RAW files positional USB rather than read the position of the mouse on the screen.  This way, I will be able to use the mouse to measure distance without having to worry about the cursor passes at the edge of the screen.  My VI will work pretty much along the lines of this one, which was kindly donated by Intaris on this thread.

  I'm running in the driver installation problems, that I created with most of the time described NI-VISA here.  I created the driver .inf and copied in C:\Windows\inf.  Since I am on Windows 7, I copied the Vista driver rather than the driver for earlier versions of windows (another user on the tutorial I linked above says it worked).  I chose my .inf file and clicked "install" from the menu drop-down of the right button of the mouse.  I received a message the first error while I tried saying that the driver was not checked and proceed in any case.  No .pnf file was created in the inf folder (as I believe she should have).  I tried updating the driver for this particular mouse for the new driver, I created in the Device Manager.  Windows has resisted, saying that it had already installed the best driver to work.

  So now I know exactly what to do.  I think that other people have figured out how to make it work, but I am helpless as to what I can do differently.  Is - anyone out there know what could be wrong?  Is there must be a .pnf file in order to get the driver to work?

  Thank you

  Thanks for the help everyone.  I think I finally found the solution .

  I did a lot of trial and error with Windows and finally I got a driver that I created in NI VISA is accepted.  Since it has been hacked together, I have a problem determining the stages that I have to work.  I'm not sure that this list of steps is quite necessary or complete, but in the interest of helping people with a similar problem, I'll try to explain what I did to get the mouse to be read.

  The key was probably uninstall the mouse that I wanted to use for the project.  I did this in Device Manager and then found the USB root hub that was running my camera.  I have updated the driver through here rather than through the section 'mouse '.  Information on the procedure to be followed are explained in detail in these two knowledge base articles:

  http://digital.NI.com/public.nsf/allkb/28C5E7D2E9FBB4CC86257536005A3692

  http://digital.NI.com/public.nsf/allkb/3C335141B64C038886257141000036F2?OpenDocument

  I created the NI-VISA drivers and saved in the default folder (under my documents / National Instruments/NI-VISA) and they installed from there.  I don't know if the installation step was necessary.  Then I updated the drivers as explained in the second article knowledge base related to listed.

  I think that the crucial stage is uninstalling the mouse in Device Manager.  This could be the "firmware" mentioned in the article by following the link, but the formulation knowledge base is so ambiguous that I thought I have to uninstall the drivers.

  http://digital.NI.com/public.nsf/allkb/273BB58D3B52CE6886256F3B00714D03

  Thanks again for the help

  -David

• C410A Windows 7 x 64 Driver install issue - fatal error

  I have a clean install of Windows 7 Home Premium x 64 on a HP m8330f. The C410a driver package from the website installed perfectly on both machines Windows 8 x 64.

  However on the W7x64 I get error fatal hpoins52.dax, invalid drive R:\ network64.msi 1603 error.

  I tried installing the base driver, the reg32.dll, I deleted the mapping my real disk 'r' all that I found via Google with no joy. I did not attempt things from geek techno more complicated than those who are generally more trouble they set.

  I got c309a pilots and his retinue all previously installed without any problems. I ran a registry cleaner as well.

  Is there a program that will clean all the old programs of HP and I have a new copy of W7x64 on my machine. I can manually add the driver, but all I can do is print, I can't scan. In fact if I could get the scan function to work, I'd be happy.

  Ideas all who are fairly simple to do and get the results you want.

  Hello RAStrong1963

  You are welcome. I too am a little confused. So based on what is going to be something keeps pointing to your R:\ player for some reason any. If rub the software did not resolve the issue you may have to give in the "requirements" of the Microsoft software installer. What I mean is that you will need to locate the appropriate files and put them where they are currently being sought.

  Before which helps to try something different. Microsoft has a utility called Microsoft FixIt who can help you with a variety of problems. I am a link below will help you to install and uninstall problems. I suggest to use to uninstall the printer. It will search the registry and delete entries as much as she concludes relating to what you choose to uninstall.
  Microsoft FixIt

• How to superimpose a partially transparent image (created by the user RGB) on a grab image acquired (I16 in grayscale) session in a while loop?

  Hello

  I'm trying to superimpose a partially transparent Alpha, RGB image, which I have already created through manipulation of pixels on an image in grayscale I16.  I16 image is acquired grab and RGB is a file location.  So my problem is that when I try to add (IMAQ) images, IMAQ add.vi gives me an error of type incompatible image.  I understand that these are different types of images; but I need to find a work-a-round in order to get the information from color to grayscale during a frame grab session information.  This frame grab is quite awhile so it runs a bit slow which is correct loop.

  I already overlaid on an image I16 RGB.  However, the two images in this instance is called from a location file and not a capture session.  Now, I need a new vi which will overlap the file created on the images of the capture session.

  If any addition information is needed, please do not hesitate to ask.  This situation is a little difficult to explain.

  Thank you for your help,

  David Fox

  
  

• Departure VISA is Looping

  After the automatic update 11.09.2009 looped departure VISA.
  Repair with the original CD was not made and there is a Message 'verhindert Ein Patch Systemstart Den'
  Back on an old update has not been successful.

  Hi goli42,

  Thank you for visiting the community Microsoft Windows 7.  Start your computer in Safe Mode and do a System Restore.

  Please let us know if that helps.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• with a 2 drive formatting issues to WD cannot format passed 1 TB (931 gb)

  I have a problem of formatting with my new 2 Terabyte Western Digital Drive using Windows tools (computer management: storage: disk management)

  I am running Vista Ultimate 32 bit SP2 all patches current
  ASUS P5NSLI MB (award bios) bios is more recent (1801) of the site of ASUS
  Western Digital Caviar Green WD20EADS is 2 TB drive

  I can't format beyond the point of 1 TB if I do formatting in windows full it stops at 54% and crashes if I do a formatting quick I get an IO error. I've already replaced the drive once through new eggs. the replacement drive is having the exact same issues. full format stops at 54% or quick format gives me a failure.

  If I partiion drive (usually get mistakes of e/s through the windows Disk Manager) I can create a partion of 1 TB and sucessfully do a quick format. Player appears to sucessfully read and files right. I made several transfers of multi GB files to this partion sucessfully. However the rest of 1 TB is not able to be formatted or partitioned through the windows. I get an IO error every time. I also tried to expand the disk through windows unsucessfully, it will not alow me or to increase the 1 TB storage. (931 GB).

  try a different aproach I downloaded the WD diagnostic tools executed through vista and they always give me an error "cable" in vista. I replaced the cables 2 x just to dismiss it as a problem. (I ran other readers on this port sata very well with the same cables).

  I also used what seems to be successfully using gparted (linux) to format the drive to NTFS. GParted reported a success on the format, but look in windows it usually shows as a drive of 1 MB for some reason any. tweak in windows, that I managed to access a partition of 1 TB. The part funny though when I express this partition to its maximum, this is where things get weird. The reader in vista Disk Manager displays as a 1963,1 GB disk but look through 'My computer' its only shows a 931 GB drive empty.

  I'm at my wits end trying to figure this. I made many calls to western digital and Asus to see if it is a bios issue or a conversation about drive failure nearly goes like this. Western Digital blamed the bios, Asus gripe with vista.

  Can someone help me?

  See this discussion on the gaming PC from HP, the final post on page 2 forum:

  http://www.thenextbench.com/HPG/board/message?board.ID=desktops&thread.ID=7453&view=by_date_ascending&page=2

  -----------
  I have just solved this problem for my HP Blackbird PC and am now able to easily partition and format a new Seagate 2 TB internal hard drive of 32-bit Vista running on this PC.

  The solution was to update my drivers Nvidia 680i chipset, available in a package update of Nvidia, not through normal driver of Microsoft and pages of OS update as much as I know.  See the above URL for more details.

  I had already tried using a stand-alone and formatting utility drive partition and even if I could create and do a quick format of the drive 2 TB, it would still fail software database to hard drive diagnostics, falsely showing hard drive looking for errors.  Also, when I ran the Windows chkdsk/f/r half of the hard drive has been marked as containing bad sectors, which later proved to be false.  After the update of the driver, no material errors are produced and no large number of defective sectors found.

  It's a problem of confusion since it seems due to disk problems hard or maybe a Vista problem.  Actually, I only update my SATA controller driver, which is Nvidia nForce 680i driver in my case.  NVIDIA has a web page with a script that will scan your PC and tell you what you need to update, for the GPU and their nForce chipset SATA hard drive controller drivers.

  Seagate also has a page to discuss the need to update the nForce drivers, which can be true for drivers of other manufacturers.

  http://Seagate.custkb.com/Seagate/CRM/selfservice/search.jsp?docid=206391&NewLang=en&HiLite=

  I hope this information is useful.

• MacBook Pro/Windows 7 driver sound issues

  I own a macbook pro, one of the new models of unibody 15 inches and since the installation of Windows 7, I was not able to properly use the microphone (on Windows) and sound acted pretty strange.

  The OS x included with my computer installation cd is supposed to install the necessary drivers on the windows side, and it seems to have done that, for the most part, except that I couldn't use the microphone in a multitude of applications. The control panel "sound" recognizes the microphone and shows that the microphone is receive sounds. The small green level bar next to "microphone" move when I make noise, yet no application appears withdraws all the sounds.

  After a little research, I gathered that the soundcard in these is actually a Realtek HD card and not a card Cirrus Logic, which is what I had drivers. So I tracked the Realtek driver, I thought I needed, uninstalled the Cirrus Logic driver and installed realtek one. However, this realtek driver does not seem to do anything, because the driver is now just listed as high definition Audio Device, which is the standard windows driver.

  Other issues I had with the cirrus logic driver - once I plug the headphones, I can't sound on speakers of the laptop again unless I have restart windows. In addition, if iTunes plays the sound in all other programs in the past and not coming back unless I restart the program.

  I guess I need to know if A) I am not mistaken on the Realtek is the right driver, B) cirrus driver is in fact correct and there is another solution for the microphone and other problems or C) there is no hope.

  Thanks in advance.

  So it seems that my problem now is that the realtek driver does not work. I downloaded the executable version of the driver first and installed, but when windows restarts, the sound icon at the bottom right has a red cross on it and after a quick diagnosis, he told me there was a problem with the driver. So I downloaded the file .zip of the drivers, uninstalled the 'old' and extracted the new and after a reboot, same thing. Red X.

  If I let windows solves the problem, restart, I am back to the driver high definition Audio Device windows and I have no sound from my speakers, that my helmet. And still no microphone function.

• Display the pictures and videos on iCloud drive app issues

  Hello

  My iCloud drive is enabled in my iPhone 6 + and iPad Pro and on the Apple TV. I can see all the photos and videos on my Apple TV. However, when I opened the iCloud reader app on my iPad Pro, no photos or videos are indicated. He is white, except for a couple of documents. I have a subscription of 200 GB and 157GB of available, but nothing shows up on my iCloud drive app in my iPad Pro. Ditto for the iPhone 6 + if I was made to understand the elements are all in the camera app. I took almost all of my pictures and videos on my iPhone and these are uploaded to the icloud drive. Please give me some suggestions as to why they do not appear on my iPad Pro but are visible on my Apple TV. I signed in with the same username and password to iCloud.

  The photo aren't in the iCloud drive application, which concerns the documents.

  Here's what you do;

  You are using Safari go iCloud.com on iPad Pro.

  Once there hold your finger on the circular at the end of the URL field arrow until the Bureau request website. Tap the Office application site.

  Connect to your iCloud account.

  Press photo icon.