Set of variable expression

Similar Questions

• Set a variable in an expression of post

  I have a test loop and if one or several tests fail, I want to set a variable 'fail', that I can use at the end of the loop to a sheet of summary data.

  In pseudocode, I want:

  If step.result.status == 'failure '.

  then failure = 1

  There is no further action so the? : operator does not seem appropriate, but I don't see any option IF. So should I write something like:

  (step.result.status is "Failed")? (locals.failure = 1): (locals.failure = locals.failure)

  ?

  Thank you

  JVH

  
  

• When I set uo Outlook Express, all of my emails that were on my cox mail server have been transferred to outlook express and then dissapered. Where have all my messages and how to get them back?

  When I set uo Outlook Express, all of my emails that were on my cox mail server have been transferred to outlook express and then dissapered. Where have all my messages and how to get them back?

  You did not indicate EO to leave a copy of messages on the server, so when he downloaded from the server, they have been removed from it.  Go to tools | Accounts | Mail | Properties | Advanced and check the box leave a copy on the server for the future.
   
  Steve
   
  wrote in message News: * e-mail address is removed from the privacy *...

  When I set uo Outlook Express, all of my emails that were on my cox mail server have been transferred to outlook express and then dissapered. Where have all my messages and how to get them back?

• set up outlook express and change the ip address on windows xp

  I would like to set up outlook express and to change my ip address on windows xp home

  Outlook Express is built into Windows XP.  To run it, click Start > all programs > Outlook Express .  To configure an e-mail account, click Tools > accounts > Add > Mail .

  To change your IP address:

  1. go in Control Panel > Classic view > network connections .
  2 right click on your network connection.
  3. click on Properties .
  4. double-click on Internet Protocol (TCP/IP) .

  However, you probably cannot change your IP address if it is assigned by your Internet service provider.  How to get your computer IP address, and why would you change?

• [ADF, JDev12.1.3] How to set a variable to bind a VO (where clause) in a managed bean?

  Hallo,

  I have a request based on VO.

  The query contains a where clause clause and a bindi variable.

  In a managed bean I would like to access the iterator of VO setting the value of the bind variable and read the result.

  I found this code it is good start, but I do not know how to set the variable binding.

  BindingContext bctx = BindingContext.getCurrent();
  BindingContainer bindings = bctx.getCurrentBindingsEntry();
  DCIteratorBinding iter = (DCIteratorBinding ) bindings.get("MyVO1Iterator");
  iter.execute();
  
  
  

  You kindly help me?

  Also, I would like to know if it is generally advisable to use VO directly in controlled beans or whether it would be best to create in the AppModuleImpl methods that do this and return the result.

  In my case for example of the VO will return max 1 plug so I'm in doubt, if the creation of a method in the AM that returns a custom class, which attributes contain values of the line of VO.

  Sorry if these questions may seem artificial, but I am a beginner, I have many doubts and so I would be happy to receive some tips regarding best practices.

  Thank you

  Federico

  You can use:

  iter.getViewObject().setNamedWhereClauseParam("yourBindVar", value);
  

  Note that this approach is used if you have bind variable in the where clause.

  To set variables bind to ViewCriteria, you must use VarableValueManager.

  This post may be useful for you: binary: how to set the Bind variable values at run time?

  Also, I would like to know if it is generally advisable to use VO directly in controlled beans or whether it would be best to create in the AppModuleImpl methods that do this and return the result.

  You must set "use VO directly.

  For example, from the point of architecture, is probably best to use the method in the model project which will set the bind variable and execute the query.

  Or you can use the ExecuteWithParams operation in your the view layer.

  In my case for example of the VO will return max 1 plug so I'm in doubt, if the creation of a method in the AM that returns a custom class, which attributes contain values of the line of VO.

  Not to complicate your life

  All VO lines are represented as ViewRowImpl class if you already have "custom class".

  Finally, you can generate your own ViewRowImpl class if it is necessary for this.

  Dario

• How to set a variable to a string with special characters?

  I want to set a variable

  < cfset inputstring = "< img src ="... /... /.. "/ Server/Win/Form/Stamp/string_1" / > "/ >"

  but I get the error message:

   Invalid CFML construct found on line 184 at column 32.
  ColdFusion was looking at the following text:
  
  
  .
  

  I try different ways, what I am, I am doing wrong?

  You must escape the inner quotes or mix single and double quotes.  Try:

  "/>

  or

  Oh, and oblique aft are not necessary in the tag.

  -Carl V.

• Setting a variable that I can call it from any symbol value.

  Hey everybody!

  I'm working on a lively game of edge and I'm learning I'll you can tell

  The way I put it in place is that I have a container that contains different symbols depending on the button you clicked on. They symbols open up to a deep part of the game.

  However, I want to be able to define a variable on the stage that I can handle later when different symbols are open.

  What I have so far is my limited understaning of jquery, in the scene that I'm leaving by setting a variable

  var variable1 =     5,
    variable2 =     10;


  Then in my symbol I want to be able to do something like this

  
if(variable1 > variable2) {

  Then do something

  
}
else {


  Then do something else
}

  }

  Variable1 = 10

  variable2 = 5

  However the problem I'm having is that when I put the value of the variable in time the name of the variable value and whole isn't rememembered in the symbols.

  So is there any code I could write in symbols that can call the variables defined in the scene in the symbols.

  I thank very you much for any help. It is greatly appreciated.
  

  Hi, I have solved literally just this problem for me! I was unable to include variables in the symbols to remember too. It will be familiar if you have access to the care of in a symbol, like this (this kind - of takes a step backward and takes you to the main stage of symbol):

  sym.getComposition () .getStage ().$("anElement").hide ();

  How I updated the score (shown on the stage) to in a symbol, it's to GET the variable from the scene:

  var score = sym.getComposition () .getStage () .getVariable ("score");

  score += 100;

  sym.getComposition () .getStage ().$("valueDisplay").html (score);

  sym.getComposition () .getStage () .setVariable ("score", notes);

  So for you I recommend you:

  var variable1 = sym.getComposition () .getStage () .getVariable ("variable1");

  var variable2 = sym.getComposition () .getStage () .getVariable ("variable");

  if(Variable1 > variable2) {this}

  Else {who}

  If you want to update the variables and store them on the scene, then you'd in the same way:

  Variable1 ++;

  sym.getComposition () .getStage () .setVariable ("variable1", variable1")

  I hope this helps, I am not 100% and it can be better explained as I learn I will myself!

  Ray

• Forms 11 - setting a variable in formsweb.cfg can get its value

  Hello
  
  I need to read .pdf documents stored on a web server using WEB forms. SHOW_DOCUMENT();
  It is web server for dev environment and another for production.
  They do not have the same URL.
  So I need to set a variable in a configuration file in both environments.
  Unfortunately it seems that forms such as getenv functions do not provide much information.
  Right now I use something else, I get the name of the database of database v$, but the DBA is not enthusiastic about the subject to give read permissions to users in production.
  
  Thanks a lot for your help.

  Hello

  The value of the variable in the /forms/server/default.env file

   ...
   my_var=...
  ...
  

  Then, get the value at run time with the Tool_env.getvar () procedure.

  declare
    v varchar2(512);
  begin
    tool_env.getvar('my_var', v);
  end;
  

  François

• need to set env variables

  OS: Linux5
  DB: oracle10g
  
  I connect to my server with PuTTY.
  $export DISPLAY = MYIP:0.0
  Doesn't not help me, tried many things by google
  any suggestoin...
  
  Kind regards

  1. you must install a X-Windows Server on the computer that you connect from.

  for example MobaXterm (free and standalone application) http://mobaxterm.mobatek.net

  2. configure your firewall to allow to communicate over port TCP 22 (ssh)

  3 connect using SSH with X-transfer to the remote computer.

  for example ssh x oracle@remote_computer.

  When you use ssh with X-Forwarding you do not set the variables of any VIEW manually -'s done it by ssh. You do not have use xhost to configure server access control. The remote server connects to the X-Windows Server on your client computer to display the application-X window. To test the xclock type.

• Use the button to set a variable

  Hi, can someone help me.

  I would use a couple of buttons I made to set a variable. I would use the name of the instance of the keys as the value stored in the variable. How can I code this?

  Thank you.

  You can use the currentTarget of the event to target the button and acquire its name...

  var btnName:String;

  btn.addEventListener (MouseEvent.CLICK, storeName);

  function storeName(evt:MouseEvent):void {}
  btnName = evt.currentTarget.name;

  trace (btnName); will trace "btn".
  }

• SET the VARIABLE problem

  Hello world!
  
  I added a line to my report of responses on the tab advanced, prefix section as follows:
  SET VARIABLE DISABLE_CACHE_HIT = 1 DISABLE_CACHE_SEED = 1;
  
  I also put a session variable by using the dashboard line. Then when I start my report, you receive the following error message:
  
  A general error occurred. [nQSError: 27002] About < GAME >: Syntax error [nQSError: 26012]. (HY000)
  
  Publ. SQL: SET VARIABLE sv_test = "Test"; SET VARIABLE DISABLE_CACHE_HIT = 1 DISABLE_CACHE_SEED = 1; SELECT...
  
  So, the first SET statement is generated from Dashboard prompt and the second section of a throug prefix. I also tried to exclude 'SET the VARIABLE' section of my report prefix, but it still does not work. What is the correct syntax?
  
  Help me, please!
  
  TNX!

  user10203008 the error is in a semi instead of the comma
  SET the VARIABLE sv_test = "Test"<; !comma="" have="" to="" be="" here!="">SET VARIABLE DISABLE_CACHE_HIT = 1 DISABLE_CACHE_SEED = 1;

  So you can do this quickly with variable pvVar presentation. And a prefix write
  * SET VARIABLE sv_test='@{pvVar}',SET VARIABLE DISABLE_CACHE_HIT is 1 DISABLE_CACHE_SEED = 1;. *

  It must works.

  Published by: AnTonic January 26, 2011 12:23

• Set the Variables in a separate timeline of problems

  Hi all

  I'm having a problem strange setting variables in video clips of another (relative chronology). I run the following code from the clip relative to the target child clips it contains.

  setVars = function (clip, value) {}

  clip.val1 = value;

  clip.val2 = 0;

  clip.onEnterFrame = function() {}

  trace ("work function");

  trace ("value 1 =" + val1);

  trace ("value 2 =" + val2);

  };

  }

  I am trying to set variables in a movie clip targeted by the argument of 'clip' setVars service but they are drawn as undefined. However, works of fine function. I have also tried to manually set the variables in the clip and am still not able to change outside the setVars function.

  What I'm doing wrong here? Any help would be greatly appreciated.

  use:

  setVars = function (clip, value) {}

  clip.val1 = value;

  clip.val2 = 0;

  clip.onEnterFrame = function() {}

  trace ("work function");

  trace ("value 1 =" + this.val1);

  trace ("value 2 =" + this.val2);

  };

  }

• How to set the variable when you click on text/image

  Hello
  
  I have the following parts of the code. What I'm trying to do is set a variable and then the new window will read this variable and show detail appropriate according to the value. I call the new window, no problem, but struggling to get all of the variable 'productidkey '...
  
  Image
  
  < td width = "202" rowspan = 2 align = "center" bgcolor = "#FFFFFF" >
  < a href = 'details.php' > < form method = "POST" action = "details.php' style =" margin-bottom: 0; ">
  < input type = "hidden" id = "productidkey" name = "productidkey" value = "6198' > < img src ="6198.JPG"width ="200"height = '133' alt ="in more detail"border = '1' >"
  < / form > < /a > < table >
  
  Text
  
  < td >
  < div align = "right" >
  < are method = "POST" action = "details.php' style =" margin-bottom: 0; ">
  < input type = "hidden" id = "productidkey" name = "productidkey" value = "6198' > < a href = 'details.php' > < span class ="TexteÉlément"> < b >... < /b >"
  </span > < / form > < / div > < table >
  
  

  It works:

  
  
  
  

• com.sun.faces.el.impl.ElException: cannot set read-only expressions

  Hi all
  
  I have done rendering m using the conditional expression for the selected attribute of < af:selectBooleanCheckbox >, but the read-only check box and I am not able to deselect them or select later.
  
  Here is the code:
  
  * < af:selectBooleanCheckbox value = "#{rank." Eligible == 'Y '? "{true: false}" id = "selectBooleanCheckbox1" / >. *
  
  If I use the JSF HTML component like * < h:selectBooleanCheckbox value = "#{rank." Eligible == 'Y '? "{true: false}" id = "selectBooleanCheckbox1" / > * and uses conditional expression, the box is rendered and I am able to select or deselect. However once I have send the form then throw it upwards under the exception:
  
  com.sun.faces.el.impl.ElException: cannot set read-only expressions
  
  Thank you.
  
  Kind regards
  R N V Prasad.

  Hi Prasad,

  You don't mention that you use for your model layer; the easiest way to proceed is to expose a Boolean attribute on your model layer and link box to the. If you use ADF business components, just to create a transitional attribute and create a getter for her in the java class that will return true or false, depending on the value of "eligible" in the same way, create a Set accessor, which sets the 'eligible' O/N according to if true/false is passed.

  John

• Table row with loop for each group to set the variable.

  HI: There is probably a simple answer for this, but I don't the have not found...
  
  I have a single row table to move through a group to set a variable containing a sum running. I'm not display the amount in the table but when I saw the report, I see that the table is expanding (add lines) for each loop.
  
  The only line table has 3 columns.
  
  1st column
  <? for-each: AC_GROUP? >
  
  2nd column
  <? xdoxslt:set_variable ($_XDOCTX, 'xAmtVar', xdoxslt:get_variable($_XDOCTX,'xAmtVar') + CURRENT_AMOUNT)? >
  
  3rd column
  <? end foreach? >
  
  Can I use <? for each group? > or something else. My requirement is to set the value of the variable with the total running, but because the loop is adding lines for each value he travels (though not displayed), it's also affecting other areas of the presentation of the page.
  
  Hope it makes sense. Thanks in advance.

  You can do it many ways.

  No need to loop
  You can create a variable and specify the amount of the sum directly to that.

  or

  loop through, then add as you do.

  give any space or enter characters in a word between them, just put it in a single form field will be

  But as I said, I'd definitely go with the first option.