Set the first value after the select statement

Hello

I have a problem here.

After you run the statement select, it'll come to me:

COM
DLY
EXC
NRD
RDY

My question: How can I set the first value instead of 'COM' in "EXC"?

Thank you.

Hello
Where you use this instead:

select *
from
(
select col_name
,case when col_name='EXC' then 1 else 0 end as "id"
from table_name
)
order by "id" desc

Tags: Database

Similar Questions

Call a method before the following operation to set the selected values

Use case: I display a VO as an ADF multiple checkbox select. This VO is the detail of a master/detail. I managed to store the selection state in a bean managed on autoSubmit. Then the user navigate to the record of the master, and then goes back to the previous record. The buttons next and previous were created using operations in data controls. I want to back up the State of the selection by clicking previous or next.
There are a lot of tutorial on how to get the selected values, but none on how to set the selected values. How would you do it?
11 GR 1 material JDev

What I ended up doing:

1 redefine listener action for the navigation buttons

{} public void nextQuestion (ActionEvent event)

saveSelectedState();

navigateQuestion ("Next");

restoreSelectedState();

}

{} private void navigateQuestion (string operation)

OperationBinding operationBinding = ADFUtils.findOperation (operation);

operationBinding.execute ();

}

2 Save and restore the selection state using bindings

Guava Multimap

Private ListMultimap selectedIndices.

private void saveSelectedState() {}

Get id question

DCIteratorBinding questionBinding = ADFUtils.findIterator ("QuestionsView1Iterator");

Question of rank = questionBinding.getCurrentRow ();

Number questionId = (Number) question.getAttribute ("Id");

JUCtrlListBinding listBinding = (JUCtrlListBinding) ADFUtils.getBindingContainer () .get ("AnswersView2");

int [] valueIndices = listBinding.getSelectedIndices ();

selectedIndices.putAll (questionId, Ints.asList (valueIndices));

}

private void restoreSelectedState() {}

Get id question

DCIteratorBinding questionBinding = ADFUtils.findIterator ("QuestionsView1Iterator");

Question of rank = questionBinding.getCurrentRow ();

Number questionId = (Number) question.getAttribute ("Id");

int [] valueIndices = Ints.toArray (selectedIndices.get (questionId));

JUCtrlListBinding listBinding = (JUCtrlListBinding) ADFUtils.getBindingContainer () .get ("AnswersView2");

listBinding.setSelectedIndices (valueIndices);

}

How to use the Type of Oracle Table values in the Select statement.
Hello

I get the initial set of values in the Table of Type Records of the Oracle and want to use the list of values in the Select statement.

For example, try something like the following:

TYPE t_record () IS RENDERING
ID TABLEA.ID%type,
NO TABLEA.NO%type

);
v_record t_record;
T_table TYPE IS the v_record TABLE % TYPE;
v_table t_table;

-Code to fill the values of v_table here.

SELECT ID, NO, COLLECT in BULK IN < some other table variabes here > FROM TABLEA
WHERE ID IN (i) v_table USER.USER;

I want to know how to use the Type of Oracle Table values in the Select statement.
Something like this:
```
create or replace type t_record as  object (
id number,
no number
)
/

CREATE or replace type t_table AS TABLE OF t_record;
/

set serveroutput on
declare

  v_table t_table := t_table();
  v_t1 t_table := t_table();

begin

  v_table.extend(1);
  v_table(1).ID := 1;
  v_table(1).No := 10;

  v_table.extend(1);
  v_table(2).ID := 2;
  v_table(2).ID := 20;

  SELEC t_record (ID,NO) BULK COLLECT INTO v_t1
  from TableA
  FROM TABLEA
  WHERE ID IN (select t.ID from table(v_Table) t);

  for i in 1..v_t1.count loop
    dbms_output.put_line(v_t1(i).ID);
    dbms_output.put_line(v_t1(i).No);
  end loop;
end;
/
```
No test!

P;

Published by: bluefrog on March 5, 2010 17:08

passing multiple values from the query in the select statement of the procedure

I am collecting IDS to select education agreement from the date of rental values and then I would pass the result of the query in the statement select to get the result.
data type for the contract id is of type varchar and date of rental there is more than one id to contract for most of the time. Help, please. Thank you

CREATE OR REPLACE PROCEDURE abstract_menu (p_letting   IN     VARCHAR2,
                                           p_results      OUT SYS_REFCURSOR)
IS
   v_contractId   VARCHAR2 (40);

SELECT lcontid
  INTO v_contractId
  FROM letprop
 WHERE datestat IS NOT NULL AND letting = p_letting AND letstat <> 'R';


BEGIN
   OPEN p_results FOR
        SELECT DISTINCT
                  SUBSTR (l.letting, 3, 2)
               || '-'
               || SUBSTR (l.letting, 5, 2)
               || '-'
               || SUBSTR (l.letting, 1, 2)
                  lettingdate,
               l.lcontid contractid,
               SUBSTR (q.cprojnum, 1, 10) projectnumber,
               DECODE (TRIM (MIN (j.route)), NULL, 'N/A', TRIM (MIN (j.route)))
                  routenumber,
               L.DATESTAT statusdate,
               L.LETSTAT lettingstatus,
               (q.cdescr) jobdescription,
               INITCAP (q.clocat1 || q.clocat2) LOCATION
          FROM vendor v,
               vendaddr r,
               letprop l,
               planhold p,
               proposal q,
               project j,
               propproj k,
               bidlet bd
         WHERE     v.vendor = r.vendor
               AND k.contid = q.contid
               AND k.pcn = j.pcn
               AND l.lcontid = k.contid
               AND p.vendor = v.vendor
               AND l.letting = p.letting
               AND l.lcontid IN v_contactid  "**************This is where I would like to pass the contract id from the above select statement***********'"
               AND l.CALL = p.CALL
               AND r.addrnum = p.billto
               AND bd.letting = l.letting
      GROUP BY q.cdescr,
               q.clocat1,
               q.clocat2,
               bd.letting,
               l.letting,
               l.lcontid,
               q.cprojnum,
               L.LETSTAT,
               L.DATESTAT
      ORDER BY lettingdate;

end;

user9196150 wrote:
AND l.lcontid IN v_contactid ' * this is where I would like to pass the id of the select statement above contract * ""»

CREATE OR REPLACE PROCEDURE abstract_menu (p_letting   IN     VARCHAR2,
                                           p_results      OUT SYS_REFCURSOR)
IS
BEGIN
   OPEN p_results FOR
        SELECT DISTINCT
                  SUBSTR (l.letting, 3, 2)
               || '-'
               || SUBSTR (l.letting, 5, 2)
               || '-'
               || SUBSTR (l.letting, 1, 2)
                  lettingdate,
               l.lcontid contractid,
               SUBSTR (q.cprojnum, 1, 10) projectnumber,
               DECODE (TRIM (MIN (j.route)), NULL, 'N/A', TRIM (MIN (j.route)))
                  routenumber,
               L.DATESTAT statusdate,
               L.LETSTAT lettingstatus,
               (q.cdescr) jobdescription,
               INITCAP (q.clocat1 || q.clocat2) LOCATION
          FROM vendor v,
               vendaddr r,
               letprop l,
               planhold p,
               proposal q,
               project j,
               propproj k,
               bidlet bd
         WHERE     v.vendor = r.vendor
               AND k.contid = q.contid
               AND k.pcn = j.pcn
               AND l.lcontid = k.contid
               AND p.vendor = v.vendor
               AND l.letting = p.letting
               AND l.lcontid IN (
                                 SELECT  ll.lcontid
                                   FROM  letprop ll
                                   WHERE ll.datestat IS NOT NULL AND ll.letting = p_letting AND ll.letstat  'R'
                                )
               AND l.CALL = p.CALL
               AND r.addrnum = p.billto
               AND bd.letting = l.letting
      GROUP BY q.cdescr,
               q.clocat1,
               q.clocat2,
               bd.letting,
               l.letting,
               l.lcontid,
               q.cprojnum,
               L.LETSTAT,
               L.DATESTAT
      ORDER BY lettingdate;

end;
/

SY.

Set the Variable in the select statement
Hello

Can we define a variable in the select statement.

Example:

Select firstname, lastname
employees;

in this simple select statement we can define x as number?
```
select fname,lname
from employees
where rownum <= 30;
```

Update using a function in the select statement
Hello

Is it possible to do the follwing.

I tabele and a custom function, the custome service will update the column (amount) of the table based on the value of going through the function of the select statement.

SELECT id, stock, where an id = get_update (id);

Now

Get_update function will return the same id I'm passing and update the column amount to a value in the
table a.

When I run the satament selection I have the updated data in the column amount in my first executtion, but if execute the same statement, again, I see the changes reflected. is it possible to get data updates to the first performance himself.

the function is of type PRAGMA AUTONOMOUS_TRANSACTION

Concerning
Indeed a strange requirement and probably not the way to go in a production environment. But anyway is a way to achieve your goal
```
SQL> create table a
as
   select   12 id, 500 amount from dual
   union all
   select   13 id, 600 amount from dual
/
Table created.

SQL> create or replace type a_typ as object (id number, amount number)
/
Type created.

SQL> create or replace function get_id (pid number)
   return a_typ
is
   pragma autonomous_transaction;
   l_a_typ   a_typ := a_typ (null, null);
begin
      update   a
         set   amount = 800
       where   id = pid
   returning   id, amount      into   l_a_typ.id, l_a_typ.amount;

   commit;

   return l_a_typ;
end get_id;
/
Function created.

SQL> select   id, d.a_typ.amount amount
  from   a, (select get_id (13) a_typ from dual) d
 where   id = d.a_typ.id
/
        ID     AMOUNT
---------- ----------
        13        800
1 row selected.
```

uniol all in the select statement

Hi I have a situation where I have to return the value based on the if statement, is it possible to put union all in the select statement
My use case is
IN the column State
If column01 > 0 to condtion 't'
IF column02 > 0 that the condition of 'Y '.
Condition IF COLUMN03 > 0 THAN 'w '.
If COLUMN04 > 0 that the condition of "Z".
Select 't'
TableName
where column01 > 0
Union of all the
Select "y".
TableName
where column02 > 0
Union of all the
Select 'W '.
TABLENAME
WHERE COLUMN03 > 0
I have what it takes to show value as it
EmpName, condition, empno
Jerry, T, 0158754585
TOM, Y, 0054789568
Am in oracle database 11 g 2

Yes you can put all THE UNION here

Select empname, 't' State, empno from tablename where column01 > 0

Union of all the

Select empname, 't' State, empno from tablename where column02 > 0

Union of all the

Select empname, condition of "W", empno FROM tablename WHERE COLUMN03 > 0

Union of all the

Select empname, condition of "Z", empno FROM tablename WHERE COLUMN04 > 0

and if you are looking for how to remove duplicates because your line might have satisfied all the conditions and my happen 4 times in your result set, you just need to give them an order and filter it.

For example, you want this

If column01 > 0 to condtion 't'

ELSE IF column02 > 0 that the condition of 'Y '.

Another condition of THAN > 0 IF COLUMN03 'w '.

otherwise if COLUMN04 > 0 that the condition of "Z".

Select empname, condition, empno, in

(

Select a.*, row_number() over (partition by empno arrested by myorder) rn

Of

(

Select empname, 't' State, empno, 1 myorder tablename where column01 > 0

Union of all the

Select empname, 't' State, empno, 2 myorder tablename where column02 > 0

Union of all the

Select empname, condition of "W", empno 3 myorder FROM tablename WHERE COLUMN03 > 0

Union of all the

Select empname, empno, condition of 'Z', 4 myorder FROM tablename WHERE COLUMN04 > 0

) a

) where rn = 1

How to set the initial state to hide/show buttons on opening PDF files?

InDesign offering a wonderful object multi-state capacity which unfortunately does not work in PDF files. It took a bit of research for me to come with this information, the UI program itself gives indications that this should work. (Why not maybe another forum of discussion.)
So, I create an interactive PDF using buttons to hide/show specific paragraphs (which are also implemented as buttons because only the buttons and forms can be hidden or shown, AFAIK).
I've set up a PDF created via InDesign using the six control keys and seven paragraphs - one of these paragraphs is the initial state that I want to see when the document is opened. As long as the PDF file that I create is distributed, that's how it works: an initial paragraph appears, buttons can be clicked and the stuff of Heroes appears the mark.
However, a colleague thoughtfully saved the PDF file (so it could rename something more to his liking). When he does this, he left one of the displayed subsidiary paragraphs, rather than the initial paragraph I intended... and of course, this is the version that came out to the customer.
Question: Is there a way to set the initial state to hide/show buttons when a PDF document is opened first, regardless of the State in which he could let or saved? I guess it's sort of ON OPEN event that would allow me to define an initial state as a safety net to the way I save the original document. Obviously, the PDF AS I DELIVER IT will pave the way, I want it, but I'm trying to overcome the appearance of the Murphy's law of a document that can be re-recorded in another State. An event which OPENED on that cure.
Thank you.

in this case you would have been better if you had locked the PDF file in order to prevent changes ANDS record as actions...

function() nested in the select statement

Oracle 11g. Try to nest a function within the select statement. Goal: get the average customer rating for each of the qualified user.
Select user_name, f_get_avg_cust_rating() "Notation.
of u, OTHER_TABLES o TAB_USER
where u.id = o.id and another condition matched;
How Oracle would deal with the sql. Is it
(1) first of all display records based on the where clause, then call the f_get_avg_cust_rating() for each of the selected records OR
(2) for the analysis in tables, the f_get_avg_cust_rating() will be called for each record met?
Thank you
Scott

Words of Frank, I created two functions with dbms_output and used a function in where clause in select another function. See the bottom of the unit tests. Everyone says, where first clause then select...

-Where function clause

SQL > CREATE or REPLACE FUNCTION ret_empno

2 RETURN NUMBER

3 AS

4 BEGIN

5 DBMS_OUTPUT. Put_line (' where Clause Function');

6 RETURN 7839;

7 END;

8.

The function is created.

-Select the function

SQL > CREATE or REPLACE FUNCTION ret_1

2 RETURN NUMBER

3 AS

4 BEGIN

5 DBMS_OUTPUT. Put_line ('Select function');

6 RETURN 1;

7 END;

8.

The function is created.

SQL > SELECT empno, ename,ret_1

2 FROM emp

3. WHERE empno = ret_empno;

EMPNO, ENAME RET_1

---------- ---------- ----------

7839 KING 1

Where the function Clause

Select the function

Pivot will not get result in the select statement
This is the version of oracle 11g R2 on windows details 7 OS

CREATE TABLE OTBOOKINGDETAILS
(EMPNO VARCHAR2 (10 BYTE),
DATE OF OTBOOKEDDATE,
NUMBER (5.0) DAY OF THE WEEK.
DAYCEILINGHRS VARCHAR2 (10 BYTE));

Here is the data

INSERT INTO OTBOOKINGDETAILS VALUES (101 ', 3 MARCH 2013', 1,' 09:00 ');
INSERT INTO OTBOOKINGDETAILS VALUES (101 ', 3 APRIL 2013', 2' 01:00 ');
INSERT INTO OTBOOKINGDETAILS VALUES (101 ', 3 MAY 2013', 3,' 01:00 ');
INSERT INTO OTBOOKINGDETAILS VALUES (101 ', 3 JUNE 2013', 4' 01:00 ');
INSERT INTO OTBOOKINGDETAILS VALUES (101 ', 3 JULY 2013', 5,' 01:00 ');
INSERT INTO OTBOOKINGDETAILS VALUES (101 ', 3 AUGUST 2013', 6,' 01:00 ');
INSERT INTO OTBOOKINGDETAILS VALUES (101 ', 3 SEPTEMBER 2013', 7,' 00:00 ');
INSERT INTO OTBOOKINGDETAILS VALUES (102 ', 3 MARCH 2013', 1,' 09:00 ');
INSERT INTO OTBOOKINGDETAILS VALUES (102 ', 3 APRIL 2013', 2' 01:00 ');
INSERT INTO OTBOOKINGDETAILS VALUES (102 ', 3 MAY 2013', 3,' 01:00 ');
INSERT INTO OTBOOKINGDETAILS VALUES (102 ', 3 JUNE 2013', 4,' 02:00 ');
INSERT INTO OTBOOKINGDETAILS VALUES (102 ', 3 JULY 2013', 5,' 01:00 ');
INSERT INTO OTBOOKINGDETAILS VALUES (102 ', 3 AUGUST 2013', 6,' 04:00 ');
INSERT INTO OTBOOKINGDETAILS VALUES (102 ', 3 SEPTEMBER 2013', 7' 01:00 ');
INSERT INTO OTBOOKINGDETAILS VALUES (101 ', 3 OCTOBER 2013', 1,' 00:00 ');
INSERT INTO OTBOOKINGDETAILS VALUES (101 ', 3 NOVEMBER 2013', 2' 01:00 ');
INSERT INTO OTBOOKINGDETAILS VALUES (101 ', 3 DECEMBER 2013', 3,' 01:00 ');
INSERT INTO OTBOOKINGDETAILS VALUES (101 ', 13 MARCH 2013', 4,' 04:45 ');
INSERT INTO OTBOOKINGDETAILS VALUES (101 ', 14 MARCH 2013', 5,' 01:00 ');
INSERT INTO OTBOOKINGDETAILS VALUES (101 ', 15 MARCH 2013', 6,' 01:00 ');
INSERT INTO OTBOOKINGDETAILS VALUES (101 ', 16 MARCH 2013', 7' 01:00 ');

Here, I want to Dayceiling hours below the output using pivot

EMPNO OTBOOKEDDATE DAY1_HRS DAY2_HRS DAY3_HRS DAY4_HRS DAY5_HRS DAY6_HRS DAY7_HRS
101 03/03/2013 09:00 01:00 01:00 01:00 01:00 01:00 00:00
102 03/03/2013 09:00 01:00 01:00 02:00 01:00 04:00 01:00
101 03/10/2013 00:00 01:00 01:00 04:45 01:00 01:00 01:00
ChakravarthyDBA wrote:
I need to include the pivot query in the select statement

Can' are you use PIVOT here since you do not know from the start what values OTBOOKEDDATE. So use:
```
select  empno,
        otbookeddate - weekday + 1 otbookeddate,
        max(
            case weekday
              when 1 then dayceilinghrs
            end
           ) day1_hrs,
        max(
            case weekday
              when 2 then dayceilinghrs
            end
           ) day2_hrs,
        max(
            case weekday
              when 3 then dayceilinghrs
            end
           ) day3_hrs,
        max(
            case weekday
              when 4 then dayceilinghrs
            end
           ) day4_hrs,
        max(
            case weekday
              when 5 then dayceilinghrs
            end
           ) day5_hrs,
        max(
            case weekday
              when 6 then dayceilinghrs
            end
           ) day6_hrs,
        max(
            case weekday
              when 7 then dayceilinghrs
            end
           ) day7_hrs
  from  otbookingdetails
  group by empno,
           otbookeddate - weekday + 1
  order by otbookeddate,
           empno
/

EMPNO      OTBOOKEDDA DAY1_HRS   DAY2_HRS   DAY3_HRS   DAY4_HRS   DAY5_HRS   DAY6_HRS   DAY7_HRS
---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ----------
101        03-03-2013 09:00      01:00      01:00      01:00      01:00      01:00      00:00
102        03-03-2013 09:00      01:00      01:00      02:00      01:00      04:00      01:00
101        10-03-2013 00:00      01:00      01:00      04:45      01:00      01:00      01:00

SQL> 
```
SY.

SHOW_LOV need to pass a parameter for the select statement
Hello

I have a requirement that there is only a drop down list but the display of the list should be based on the certern parameter.

I have a table (id, type, description). The select statement for dropdown I need is

SELECT id, description of the table where type = & input_param.

Can someone help please!
create a field and create value in the list select id, description from table1 where col =: block1.item

Cross tab in the SELECT statement?
Hello

The following SQL statement:
SELECT
T.LASTFIRST, C.COURSE_NAME, CC. COURSE_NUMBER, CC. SECTION_NUMBER, CC. EXPRESSION, ST. SEX, COUNT (CC.) STUDENTID) STUDENTCOUNT
TEACHERS T
JOIN THE CC
ON CC. TEACHERID = T.DCID
JOIN THE COURSE C
ON C.COURSE_NUMBER = CC. COURSE_NUMBER
JOIN STUDENTS ST
ON CC. STUDENTID = ST.ID
WHERE CC. SCHOOLID = 100 AND TERMID > = 1900
T.LASTFIRST, C.COURSE_NAME, CC GROUP. COURSE_NUMBER, CC. SECTION_NUMBER, CC. EXPRESSION, ST. BETWEEN THE SEXES
ORDER OF T.LASTFIRST, CC. COURSE_NUMBER, CC. SECTION_NUMBER, CC. EXPRESSION, ST. BETWEEN THE SEXES

Returns the following dataset:
Abram, American history Michael SOC1000 1 a 2 F 7
Abram, American history Michael SOC1000 1 has 2 M 12

Is there a way to make the count gender for each sex, introduce yourself as a column in the SELECT statement so that there is only ONE row returned by course number with as FEMALECOUNT and MALECOUNT column headers?

I tried to use a statement select count nested inside the original SELECT statement but without success.

Jeff
You should be able to use a CASE statement for this in collaboration with the County. COUNTY does not indicate that null instances no I have not specified a part to the CASE ELSE (so the default value is NULL).
```
COUNT(CASE ST.GENDER WHEN 'F' THEN 1 END) as Female_count,
COUNT(CASE ST.GENDER WHEN 'M' THEN 1 END) as Male_count, 
```
Note that you need to remove the Gender of your query column.

How to ask the user to type in the select statement
Hello

Can anyone tell me the syntax of the select statement where I can ask the user to enter the value.

for example, I try to use belowthing, but it displays error

Select * from emp where empname =: empname

SP2-0552: Bind "empname' undeclared variable.

2. is there a dictionary of data table to see all pl/sql procedures and corresponding code?

Thank you
Sri
Try:
```
select * from emp where empname='&empname';
```
L.

command evaluated Pivot and UnPivot in the select statement

My research assessing the order of the select statement is below.

 1 from
 2 where (Join condition)
 3 start with
 4 connect by
 5 where (filter of rows)
 6 group by
 7 having
 8 model
 9 select
10 order by

My question is Where clause Pivot and UnPivot clause ?

http://download.Oracle.com/docs/CD/E16338_01/server.112/e10592/statements_10002.htm

Well the pivot is applied to a single table or an inline or a view - so it's going to be like any other table or view in the list - it will be first

select b.BUSINESS_OBJECT_CATEGORY_DESCR, a.c, a.d
from
 (select PAY_METHOD_TYPE_CODE, BUSINESS_OBJECT_CATEGORY_CODE
  from target_odi.business_object_pay_methods)
 pivot (count(PAY_METHOD_TYPE_CODE)
         for PAY_METHOD_TYPE_CODE in  ('D' as d, 'C' as c)) a ,
target_odi.business_object_categories  b
where a.BUSINESS_OBJECT_CATEGORY_CODE = b.BUSINESS_OBJECT_CATEGORY_CODE

So for the SQL above the pivot is first assessed before the join between A and B.

ComboBox - trying to set the selected item
I call a remote object that calls the following function to the suite. The returned object is used to fill a form of TextInputs and a ComboBox control - this is a form of change. How can I set the selected item in the ComboBox? I could not get the selectedItem to work, and I do not know the value of the index that corresponds to selectedCompany.CompanyType in order to use selectedIndex.

private void receiveSelectedCompany(event:ResultEvent):void {}
selectedCompany = event.result as business;

copy the record in the areas of publishing
txtCompanyId.text = selectedCompany.CompanyID.toString ();
cboCompanyTypeEdit.selectedItem.CompanyType = selectedCompany.CompanyType;
txtCompanyName.text = selectedCompany.CompanyName;
txtCompanyShortName.text = selectedCompany.CompanyShortName;
txtTaxId.text = selectedCompany.TaxID;
}

Thanks in advance,
France

FranceC, here is a function allows you to do.

simply call the selectComboValue function and pass it the name of the combobox and the search string as follows:

selectComboValue (Mazonedelistederoulante, dataObj.fieldName.toUpperCase ());

Here's the function:

public void selectComboValue(select:_mx.controls.ComboBox,_optionToSelect:String):void {}
for (var i: int = 0; i< select.dataprovider.length="" ;="" i++)="">
If (select.dataProvider.getItemAt ( ) .label == optionToSelect) {}
select.selectedIndex = i;
break;
}
}
}

PS: If you are looking for the data rather than on the label simply change this line:
If (select.dataProvider.getItemAt () .label ==)
to do this:
If (select.dataProvider.getItemAt ( ) .data == )

mixture of column type in the select statement

Oracle 11g r2.
tab_test (name varchar2, blob... photo)
(1) select general use *.
Stored procedure: open ref_cursor to some * of table_test...
Coast of java: call.registerOutParameter (1, OracleTypes.CURSOR); Call.Execute ();
It works very well.
(2) enter the name of the column in the select such as
Stored procedure: open ref_cursor to select name, photo table_test...
Coast of java: call.registerOutParameter (1, OracleTypes.CURSOR); Call.Execute ();
ERROR: java.sql.SQLSyntaxErrorException: ORA-00932: inconsistent data types: expected - got BLOB
My question, if I specify the column names in the select statement, including the varchar2 and blob, how can I registerOutParameter (1, OracleTypes.CURSOR);?
Thank you
Scott
PS The number of returned columns, in real case schenario, is a little, so I prefer to specify column names.

Wrong forum. This forum is for questions of sql and pl/sql.

Enter the question ANSWER and the repost in the JDBC forum

https://community.oracle.com/community/developer/english/java/database_connectivity/java_database_connectivity _(jdbc)

When repost you provide the necessary information to help you:

1. information on the full version for Oracle DB

2 version of the JDK

3. the name and version of the JDBC jar file

4. real code that demonstrates the problem

You should also review the info re REF CURSOR in the JDBC Developer's Guide

http://docs.Oracle.com/CD/E16655_01/Java.121/e17657/oraint.htm#i1058743

Set the first value after the select statement

Similar Questions

Maybe you are looking for