Set the password for screw programmatically

Similar Questions

• How to set the password for HARD drive?

  Hello

  Could someone help me please by setting the password for TOSHIBA STOR. E ART 3 (1 TB 2.5 ") HARD DRIVE?

  Hello

  I n t have this external HARD disk, but Toshiba pre-installed some additional software on this subject for the creation of HARD drive password?

• Password reset disk error - "year error occurred while the wizard attempted to set the password for this user account.

  Hello!

  -A bit of background: the desktop PC that I use is Windows Vista Ultimate Edition, with active user accounts total five. I have my own account, and I can access the computer through (or through account from my brother, because I know its password).--

  I had this problem recently came where the administrator password (that I know for a long time and never changed) no longer works. So, after some research, I created a reset password on a USB disk, that I found in my house. I managed to create the disc, but when I tried to put the new password, I got the message error "an error occurred while the wizard attempted to set the password for this user account', which I must say is not very clear. I found a few methods of force - reset the password for the account of the admin, as using a sort of Windows Vista DVD or go to Safe Mode to find the hidden administrator account... but I have no idea what this DVD is or where to find, and in Safe Mode, there is no account user administrator to be seen. I believe that my machine is corrupted, but I don't want to buy a new. I want just to reset a password...

  Any help is appreciated. If I was not specific enough, I can specify in comments.

  Thank you!

  Hello

  You must make a password reset disk before that there are problems with a password, not afterwards.

  ________________________________________________________________

  Read this for your problem:

  http://support.Microsoft.com/kb/940765

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  _____________________________________________________________

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  See you soon.

• I tried to reset my password computer laptop but the laptop telling me an error occurred while the wizard attempted to set the password for this user account how can I fix this pleas

  I tried to reset my password computer laptop but the laptop telling me an error occurred while the wizard attempted to set the password for this user account, how can I fix this means if someone knows how to fix teas pleas answer me quickly I have to work

  Logging in as an admin account, then reset the password for the account of the problem.

• How can I set the password for iPad 2 Air to something else than "immediately"?

  I have three iPad, iPad 2, iPad 2 Air and tha iPad Pro.

  My iPad 2 Air gives me the option to "set the password immediately".

  the other two iPads give options, for example, 15 minutes, 1 hour, etc.

  All three iPads running the latest IOS.

  is this a glitch with my iPad 2 Air or are they all like that?

  Why the 'immediately' is the only option? It looks like the other options are missing.

  Thank you.

  Try the help in this support article > using a password with your iPhone, iPad or iPod touch - Apple Support

• set the password for the 'parameters' on iphone 5

  Y at - it app to set a password for the "parameters" on an iphone 5?  My son continues to change some of the parameters,

  N ° define a word password on the phone and don't let not your son play with him.

• Cannot set the password for hard drive on the W530 with Intel SSD 520

  Hello

  I have a w530 with an Intel SSD 520 in primary hard drive Bay. Whenever I try to set a password for the primary hard drive, it doesn't stick. If I chose master + user or simply user, I will enter the password, it will take the passwords without producing an error and then just dump back me to the screen of passwords while leaving the disabled hard drive password.

  BIOS is on the latest version for the w530 and SSD, the machine seems fairly normally operate differently.

  Does anyone have ideas how I can activate the password? Thank you!

  Hi, ctenorman

  I did some research and came across this thread of Intel. There are a few people in the thread who were able to set the password on this particular drive. It seems that changing the BIOS "SATA" compatibility mode, set the password, restart, and then change it to "AHCI" worked for some, but not all customers with this player.

  Good luck and let me know how it goes

  Adam

• How to set the password for folders in Windows XP

  Original title: I want to put the password on file. So how can I do? My operating system is windows xp professional
  I want to set the password on file. So how can I do? My operating system is windows xp professional

  Hello

  You can set the My Documents folder as "Private" in Windows XP, to so please check the link below.

  http://support.Microsoft.com/kb/298399

  To set password for files, it you will need a third party program, you can use your favorite search engine and download the third-party program.

  Note:

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• How to set the password for the screen saver?

  When connecting, password is not necessary and I put it under 'control userpasswords2', but I'd like to set password within the screensaver 15 minutes idle.

  Anyone have any suggestions on how to do it?
  Thanks in advance for your suggestions

  Hello

  You will need to set a password for the connection on your computer user account.

  After that, you can set the screen saver and set the option on the resumption, the logon screen and specify 15 Minutes to time waiting .

  Concerning

• error occurs when you use Assistant password reset - "an error occurred while the wizard attempted to set the password for this user account.

  I create the reset disk of password on another laptop, because the other laptop I forgot the password. There is solution in another thjred saying to open cmd, but I can't open it because there is no password to access. But I have another account which is a guest account, then maybe I can reset the password to the guest account? (no internet in the guest account)

  Hello

  You cannot create a reset disk of password on another computer to another computer where you have forgotten your password.

  You create a password reset disk on your computer in case, and before that you have forgotten your password, not after that you forget it.

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-password-reset-disk

  @@@@@@@@@@@@@@@@@@@@@@@@@@@

  If it is not applicaple, you need to reinstall the operating system.

  "What to do if you forget your Windows password"

  http://Windows.Microsoft.com/is-is/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  "If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log on Windows and you need to reinstall Windows. »

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  See you soon.

• Cannot set the password for BIOS supervisor on U300s

  Hi all.

  I was able to enter the BIOS and will mark the setting on the Advanced tab, I could see Security tab, but, I couldn't change the settings! It was not locked by password at all. It seemed that everything on the menu has been disabled. So, I couldn't create the supervisor password.

  Does anyone have an idea?

  Thank you.

  I found that I have to change quick start the normal start first, and then I could put the password. Solved!

• Cannot set the password for user connection in Vista Home Basic

  My laptop (running Vista SP2) has no password on the user account. Guest account is disabled and my user account is administrator.

  I would like to add a password to secure my PC a little more by doing the following:
  AutoScan (Vista Orb) > Control Panel > user accounts > create a password for your account
  I enter a password to 10 characters. I tried more or less characters, a mixture of uppercase and lowercase letters and numbers etc, but everything I try I get the following message:

  "The password you entered does not meet the password policy requirements. Check the minimum password length, password complexity and password history requirements"

  Any ideas what to do here? I tried searching online and through this forum but have been unable to find someone who had the same problem, and even less it is solved!

  I ran Microsoft Security Essentials software, choose scan "Full". The software found no viruses or malware on my computer, but he did put in quarantine RealVNC (software remote access we use occasionally to work).

  I have created a screenshots of system information (to show which operating system I use), the dialogue 'create password for your account' (to show that I am logged on as administrator and to make sure that I do not have the process wrong--always possible!) and the error message "user account control panel.

  Computer info here

  I also took a screenshot of the thing that MSE found after analysis is complete on my system.

  Microsoft Security Essentials here Info

  Thank you

  Eamon

  I solved this problem!

  The problem was caused by HP - something that was installed on my laptop security manager because I bought - I never used and had no idea he was running. I discovered this when I decided to upgrade my operating system to Windows 7. I was running a tool to check if the software I had installed is compatible for the upgrade; It turns out that the HP Security Manager is not compatible with W7, and when I uninstalled it I followed a hunch that it might interfere with my account - tried by adding a password and he succeeded!

  I was also able to install Sophos and it works properly now.

  I've always upgraded to Windows 7 in the end, but it was nice to be able to solve this problem (even if it took me Age to understand!) Hope this helps someone else with a similar problem.

  Eamonlaser

• How to set up the password for the supervisor on Tecra A4

  Hello

  I want to activate a password for bios we give access my tecra A4. (supervisor password)

  But when I activate a password, it is for the start-up of the pc.

  I want to warn the user base to reach the bios without activating a password at the start of the pc.

  How can I do?

  Thank you

  Hello

  If you want to set the password for the supervisor so you should do it in the utility supervisor password.
  On my laptop, I found this utility in the assistance of Toshiba-> sure.
  I presume that it s also on your A4.

  There, you can start the supervisor password tool. Here, you have to choose the option saved.

  Please post if this works

• You can set the password to the screen saver different password that the password system on Windows 7

  I want to set the password for the screen saver to something else that the network password that I use. Is this possible in Windows 7?

  It is not possible. When the screensaver starts and then interrupted, the login screen appears. Then, of course, it cannot be a different password.

• How can I set a password for firefox so that everyone must enter the password before running firefox

  My younger sister run my firefox just to this afternoon (she origin use IE), and she saw something that is not visible. How can I set a password for firefox so that everyone must enter the password before running firefox?

  Another option is the master password + extension.

  You must first make sure that Firefox uses a master password, for more details on how to do that see use a master password to protect stored logins and passwords. Then with the master password + extension in its options, go to the getting started section and make sure that "ask for password at startup" and "Exit if cancelled" is selected both.

  As with all extensions, this protection is quite weak and can be bypassed if start you Firefox in safe mode that disables extensions.