Set the size of permanent text for pages in firefox

Similar Questions

• How to set the size of a text field

  I use the command

  #get - vm | Select name, folder

  The values that I get are truned.

  Please can someone explain how can I set the length of a text value?

  Concerning

  Marius

  The performance engine uses the rules of display and formatting the required properties on the limited space of the screen of the console.

  There are ways to influence the results.

  Get - VM | Select name, file | Format-Table - AutoSize

  Get - VM | Select name, file | Format-List

  Get - VM | Select @{N = "Name"; E={$_. {{Name.SubString (0.6)}}, @{N = 'File'; E={$_. {{Folder.SubString (0.10)}}

• Set the size of the window for DOS applications running on the Windows XP Pro machine

  I have some old Basic (QBasic, Flodraw) DOS programs I still want to run occaisionally. 2002 was the last time I used them, so I don't know what OS was running then. When I run the application now that open windows are not ideally sized, the Flodraw is too big, I can't see it as much of the screen as I would, and QBasic is too small to get enough text to keep my train of thought.

  Anyone know how I can get control of the size of the window? I need create .pif or something like that?

  Thank you.

  Right click on the shortcut for the program icon, and then click Properties. You will see where you can set the size. MS - MVP - Elephant Boy computers - don't panic!

• How to set the size of the text by the height of the capital letter?

  As an old signmaker, I have always referred to the size of a letter by the actual height of a capital as 'E '. Is it possible to assign the format letter by the height of a capital letter?

  Assign the effect "hierarchical", the text object. Set preferences for «Limits of use overview» To adjust the height.

  Does not work worth a dang with text.

  1 type tool: Set PointType object default myriad, 12pts Type 'X '.

  2. apply the effect > describe the object

  3. the general Prefs > turn on use Preview Bounds.

  4 Control Panel: turn on the proportional button.

  5. button '2' in height. Height passes to 1.2828.

  6. button '2' in height. Height passes at 1.7275.

  7. button '2' in height. Height passes at 1.8965.

  8. button '2' in height. Height goes to 1,9606.

  9 button '2' in height. Height passes to 1,985.

  10 key '2' in height. Height passes at 1.9943.

  11. key '2' in height. Height goes to 1.9979.

  12. button '2' in height. Height passes to 1.9992.

  13 '2' in the height field button. Height becomes 1.9997.

  14. button '2' in the height field...

  Nor do I want to have recourse to the use Preview Bounds development, affecting everything in the document. (Illustrator has so many things buried in general Prefs that should be more specific document/context.)

  The mentioned script is here. However...

  DMCLV, for this reason, sign stores commonly use Corel Draw rather than (or at least the) Illustrator. Draw has an explicit function which lets call you for the type of ceiling height. When you select an object, the so-called 'Artistic text' (roughly analogous to what is called "PointType" in Illustrator), you can set the size normally. But the object field shows the height of character of the text object outlines. If you can, for example, define an 'X' and see its typographic size and height of contour at the same time. So you can enter the size using both methods, when you want without having to go through hoops.

  

  Draw also provides scales of design defined by the user, tools of dimension, the connector tools, legend tools and other useful features every day for sign shops and everyone (, too). If I were you (or I was), I would take advantage of competitive sidegrade Corel Draw. The discounted cost is easily justifiable even with all the other useful things included in the package in addition to the features of common sense missing still HAVE afer nearly three decades (font manager Bitstream, a large collection of fonts, PhotoPaint, a collection of clipart) large.

  JET

• How to set the size of text with the report generator

  Hello.

  I'm trying to set the size of the text with the report generator, but I find that I can't do this. Here is an example of the code that I use. Can someone tell me what I'm doing wrong please?

  Thank you, Alec

  

  I was generation from a word template.

  I hacked my version of the Toolbox to give me maunal indicator control "model? He had obtained his permenatly self stuck on "T". I exposed this flag outside the API, so I can control under certain weather conditions I may or may not use the model police.

  Does anyone know how to use this toolkit, or I did the right thing?

  Cheers, Alec

• I can adjust the size of the text on the new mail / out, but can't set the size on the mail coming on my screen.

  Problem with the size of the text

  I can adjust the size of the text on the new mail / out, but can't set the size on the mail coming on my screen. Evil in my sight.

  Inhabitant of the desert

  Is this a comment or a question? If a question, care to share with us, what e-mail program you speak?

• 1815dn how to set the size of the paper for the sweep of glass

  I have received a report from a colleague working in Europe on A4 size paper and want to scan it for editing.  The report is spiral, I went to scan on the glass instead of the separation for feeding through the ADF.  When I do this, instead of automatically detect the size of the paper, it scans only the portion of standard letter size simply and lack substance.  But I can't seem to find anywhere in the analyze menu to set the size of paper either.  Can anyone help?

  
  

• C1765nfw copy Issue: printer always takes into account that I have copies of legal size, even though I set the size of the copy as "letter"...

  C1765nfw always guess I make copies of legal size, even if I set the size of the copy as a 'Letter' in the default copy settings.  Paper default tray is also 'Letter' and 8.5 x 11 paper I get incompatibility of paper for each page, because the C1765 is looking for legal size paper. and then have to erase/reset for each page I copy (including multi-page documents) how to fix this?

  I just fixed that for a client, and it was pretty simple. Somehow its default settings for the MPF tray have been changed to legal. Try going to settings of the tray then MPF and change the default to the letter. This corrected it in my case.

• after update, the size of a text annotation needs to be adjusted independently

  The version of my Adobe Acrobat Reader DC is 2015.016.20039.

  In this version, I have to adjust the size of text annotations independently.

  For example, when I write the first textual annotation on my PDF document and adjust the text size to size 18, after that, when I write the second textual annotation, the size is automatically reset to 10 and I need manually set the size for the second textual annotation again!

  Dose anyone know how to set the size of all annotations together?

  Hello LDENG,

  My apologies for the inconvenience caused.

  For the text comment adds the functionality to maintain the font properties, once the game does not work in the latest version, and a BUG is already connected to it.

  We're working on this priority issue.

  Regarding 2nd query defines the font size for multiple annotations together is not supported until now, but we will consider this feature.

  For the time being, you will need to change the font of each cannot than desired.

  We will inform you quickly once this bug is fixed.

  Thanks and greetings

  Aduait Pokhriyal

• ORA-19510: unable to set the size of the blocks of file ' ' (blocksize =)

  I checked archivelog dest everything ok, power logs archived bit time, everything ok, I wondered what could cause this and how to solve this problem permanently.
  
  
  Log queue alerts
  Fri Jul 31 06:10:08 2009
  Errors in the /oracle/admin/gdwp/bdump/gdwp_arc0_1220702.trc file:
  ORA-19510: unable to set the size of the blocks of 74905 for the file ' / archive/gdwp/gdwp_1_18207_654896926.arc ' (blocksize = 512)
  ORA-27037: unable to get file status
  IBM AIX RISC System/6000 error: 2: no such file or directory
  Additional information: 9
  Fri Jul 31 06:10:08 2009
  Errors in the /oracle/admin/gdwp/bdump/gdwp_arc0_1220702.trc file:
  ORA-19510: unable to set the size of the blocks of 74905 for the file ' / archive/gdwp/gdwp_1_18207_654896926.arc ' (blocksize = 512)
  ORA-27037: unable to get file status
  IBM AIX RISC System/6000 error: 2: no such file or directory
  Additional information: 9
  Fri Jul 31 06:10:08 2009
  Arc0: Error 19510 closing log file archive ' / archive/gdwp/gdwp_1_18207_654896926.arc'
  ARCH: Stopped archiving, error occurred. Will continue to retry
  Fri Jul 31 06:10:08 2009
  ORACLE Instance gdwp - archive error
  Fri Jul 31 06:10:08 2009
  ORA-16038: log 1 # 18207 sequence can be archived
  ORA-19510: unable to set the size of the blocks of file ' ' (blocksize =)
  ORA-00312: thread 1 1 online journal: ' / db01/oradata/gdwp/redo01.log'
  Fri Jul 31 06:10:08 2009
  Errors in the /oracle/admin/gdwp/bdump/gdwp_arc0_1220702.trc file:
  ORA-16038: log 1 # 18207 sequence can be archived
  ORA-19510: unable to set the size of the blocks of file ' ' (blocksize =)
  ORA-00312: thread 1 1 online journal: ' / db01/oradata/gdwp/redo01.log'
  Fri Jul 31 06:10:11 2009
  ARCH: Stopped archiving, error occurred. Will continue to retry
  Fri Jul 31 06:10:11 2009
  ORACLE Instance gdwp - archive error
  Fri Jul 31 06:10:11 2009
  ORA-16014: log 1 sequence # 18207 not archived, no available destinations

  DBA2008 wrote:
  Notes 560204.1 suggest that to get rid of the generation of the trace file, is - it safe?

  I won't read the note at the moment but would surely say they told you to check the destination where the files are current. Did you do that? Raise a SR with OSS, to get their approval before doing something like what you try. Its you only who would face consequences, good or bad, no one else so better take a safe approach and the first approval of OSS.

  HTH
  Aman...

• Set the size of fixed table

  Hello. I am developing a VI to a FPGA target and I'm trying to make sure who is using the VI can specify the size of an array of input when they instantiate (such as by the presence of an entry to the VI who said "maximum table size" or something). So far, it seems that the only way to do something like this is to go into the VI himself and manually set the size of table for each entry in the table for the VI (open the VI, do a right-click on each input array, select 'Set the size Dimension', choose 'fixed', set number of items). I would like to have a point where I can set the size of all tables at once (as in my case, they are all the same size) and let the person using the VI set it to the right size for which application they use it for (to be clear, let's say I have two uses for this VI and in one case (, I have a table of entry of size 100 and other use of size 1000, I would like to be able to put these in some way rather than do it through the dialog box). Thank you.

  It's a little more work, but it could be a case of good use for a memory block on the FPGA.  Make it bigger you wait, you need, and then store the actual number of items somewhere.  This will allow you to vary the amount of data without consuming large amounts of FPGA resources on an oversized table.

• How to set the size of the frame in the controls of decoration

  Hello

  I paint frames or boxes using the templates in the control of "Décorations" in labview.

  Is there another way to set the size of the frames or boxes rather than drag? also, how can I change the color of the borders?

  Thank you

  Joyce

  Select the item.  Click the resize objects in the toolbar.  Choose the last of them, which shows a resizing in a speech bubble.  Now, a dialog box appears that allows you to set the height and width.

  For something of color, Shift right click to bring up the box tool.  Take the brush.  Click on the thing you want to change for example from the border.  It could now be the wrong color, do a right click so that brings up the color picker.  Now, select the color you want in fact.  If you want something to be transparent, choose the T in the upper right of the color dialog box.

• Programmatically set the size of a table control (not the number of col and lines)

  Hi all

  I am trying to create a little VI, in which the user selects the number of columns and rows in a table, and after clicking on a button 'OK', the table control is displayed in the control panel (to be filled in by the user). To do this, I use the nodes property to the number of columns and lines. I have no problem with that.

  However, I want to "limit" the size of the control table (control of himself, not the dimensions of the table) and make use of vertical and horizontal table, the scroll bars. I want to avoid it is that passes type 100 user and 100 lines and appears a huge table control.

  I could tho this by using an array instead of an array, via the node property "size", but I would use an insead table a table.

  Thank you very much

  Daniel

  With a table control, you cannot set the display size to be anything other than a multiple of a complete cell.

  If you are limited to a number of lines and columns.  If you want to resize with more control you also need to resize the control within the Bay, accessible via the property 'picture Element '.

  Another option (but seems huge exaggerated) is to place your table in a secondary and set the size of the secondary to the size you need and enable scrollbars for her.  It is not an option that I would choose but if it helps...

  Have it, your description of your user interface sounds not very intuitive.  How the user knows at any time exactly what cell they access if they have to scroll backwards?

• My window size is about 1/4 "wider than my monitor screen. How to set the size of the window?

  My window size is about 1/4 "wider than my monitor screen. How to set the size of the window?

  Hello

  ·        You did it changes on your machine before this problem?

  ·        You have a LCD or TFT monitor?

  Usually in LCDs, there will be an option to set the button of the screen on the monitor resolution.

  You can also follow these links for the resolution of the monitor & check if it helps.

  Change the resolution of your monitor

  To change your screen resolution

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to set the size of my screen?

  Original title: maintenance

  How to set the size of the screen

  Norm 21

  How to set the standard for screen size 21

  Resolution:
  Right-click on a free space of the desktop > Personalize > Display Setings > move the slider to the left or right to set the resolution. Check your user manual, see if she tells you what resolution is for your computer. My laptop is using 1280 x 800 pixels.

  Here is a table of the guide line:

  

  You can also try this method...
  Re - set DPI:
  Right-click on a free space of the desktop > customize > column to the left, adjust the size of police (in PPP) > uac prompt > click default scale (96 DPI).

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.