HP Envy 5530: HP Envy 5530 fails to complete initialization

Similar Questions

• HP Officejet 6500 Wireless - printer installation failed to complete the

  I have the installation of the printer with a static IP address and a Linksys WRT310N router. I am able to connect wireless from a desktop running Windows 7 PC. Then tried to install on my laptop Dell also runs Windows 7, with software firewall disabled, but the Setup program does not complete.

  The measures taken are: run the add a peripheral Officejet icon from the desktop, select the wireless option in printers network found it shows my printer with the good IP and MAC, then I select him and click Next, run Network Diagnostics shows then goes to the installation of your screen of the printer. The green progress bar goes all the way through and says 100%, but then says "printer setup failed to complete. Clicking Retry done the same thing, then just closes but no installed printer.

  Help!

  Hello

  I had the same problem on my two computers to Vista (x 64) and 7 (x 64).

  I manually configured address (192.168.1.90) on my printer (OfficeJet Pro 8500).

  In part, I installed current drivers (OJP8500vA909_Full_14.exe), but had the same problem as you:

  the printer has been detected but not installed. I had the same helpful error ' printer setup failed to complete «...»»

  Strangely, I could open the printer info web page to my IP address (http://192.168.1.90), for the config network was good.

  Here is what fixed the problem for me:

  -Open the computer

  -Click on network

  -must be registered with your printer

  -Double-click it, and then click 'continue' if he asks you to do

  This will start an installation of the driver. When it is finished, try to rerun the original installer or click the icon that was placed on your desktop to complete the installation of the printer.

• Call of Duty World at War: Error 1628: failed to complete Installation

  I get a "Error 1628: failed to complete Installation" when installing under Windows 7.
  I open the DVD and right click on Setup.exe to run as administrator.

  I found some info on the internet to try to go in administrative tools - local security policy - Software Restriction policies - updated in application and verification of all users except thing administrators, but nothing helped.

  I remember when installing on a previous Vista machine, I had the same problem, but I don't remember what I did, but there is obviously some kind of security problem.

  I have install from (only) on the machine and there of course administrator rights. The account has no password. I tried to create an other administrator account that I gave a password and tried to install it from her, but that didn't help either.

  I also tried the following, after a suggestion from Activision:

  1 create a folder "test" on your desktop.
  2. go to the "My Computer" screen
  3. right click on the DVD drive located in the game disc, and select "explore".
  4. copy all the files and folders that you see here and paste in your 'test' folder on your desktop.

  The copy process must begin now. If the game has copied correctly for you, then try to install the game from the "setup.exe" file in your copied folder.

  This did not help either.

  Help, please!

  Hi Bengt,

  We are pleased to hear that you were able to solve the problem.  Do not hesitate to contact us, in the case where you face other problems in the future.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Impossible to install programs, download 1628: failed to complete the installation after the installation of service pack 3

  Impossible to install programs, download 1628: failed to complete the installation after the installation of service pack 3. What I have to do.

  Assuming you meant WinXP SP3...

  Why the SP3 was not installed for over a year?

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?  Who were these applications that run in the background when you tried to install WinXP SP3?

  A (another) Norton or McAfee application has already been installed on this machine (for example, a free trial version which is preinstalled when you bought it)?

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I use Windows 7 Professional, my result the research failed to complete folder list. Help, please!

  I use Windows 7 Professional, my result the research failed to complete folder list. Help, please!

  Hi Shaji,

  You are referring to the methods mentioned links.

  Method 1: Fix Windows Desktop Search when it hangs or no display of results

  http://support.Microsoft.com/mats/windows_search?WA=wsignin1.0

  Method 2:

  Open the troubleshooter for search and indexing

  http://Windows.Microsoft.com/en-us/Windows7/open-the-search-and-indexing-Troubleshooter

  For your reference:

  Change advanced indexing options

  http://Windows.Microsoft.com/en-us/Windows7/change-advanced-indexing-options

  Improve Windows searches using the index: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/improve-Windows-searches-using-the-index-frequently-asked-questions

  Hope this information helped!

• Want to 5530 failed to update 08/04/2014

  After update (?) the 5530 "2014-04-08" envy, Version32.2, 110.49 M many problems have arisen.

  #1-can't scan or from the computer (via USB or NET) - can scan to SD card.

  #2 when you are trying to solve this problem, the following error message appears:

  "The comprehensive software solution is not installed on this computer.

  Click - 'install software' - watch download - then "download failed".

  Other info: "print and scan the doctor 4.3" does not work.

  Several attempts to repair or uninstall and reinstall the software failed.

  Message: ' PROPSYS.dll is not designed to run Windows or.

  It contains an error"arose from time to time.

  FYI - the basic features of printer worked fine for months without incident.

  Instant access to the web ink still - works but not the computer.

  Computer system: WIN 7 (64)

  Help, please.

  28/09/2013

  This user has the same basic problem: "ENVY 5530 All in One not founf when you try to scan from Printer Wizard."

  -No solution listed in Blog.

  Thank you for this answer.

  Yes, it seems that you receive two error messages when you attempt to install the 5530 like software. I would like to start off the power using this tool called Microsoft Fix it, which will fix all the problems that programs cannot be installed or uninstalled: (this information is shown here.)

   

• HP ENVY 7640: failed to update for windows 10

  I had this error on update, I have windows 10

  • Error of Hewlett-Packard - Company WSD multifunction printer, MFP, HP ENVY 7640 of material other series - Null Print - 0 x 80070103

  • Update driver HP for Fax - series HP ENVY 7640 - error 0 x 80070490

  Hi, Hello!

  Thanks for sharing this request in this forum.

  Please, try the following steps and hope this helps!

  1. Go to settings-> devices-> devices
  2. Click the Device Manager link at the bottom of the screen.
  3. Open "printers".
  4. Then uninstall/remove the "unknown device" if present.
  5. Restart Windows 10 update.

  Thank you and best regards,
  meg0316
  
  I work in HP, but I am personally.

• HP Envy 5660: Failed to update Windows 10 thanks HP Envy 5660

  After the installation of the printer HP ENVY 5660 updates always display the error "• Hewlett-Packard - Company WSD multifunction printer, MFP, other materials - Null Print - 5660 HP ENVY series - error 0x800f020b". Even after the withdrawal of the unit and uninsatalling this error repeatedly, and update windows 10 is not coming. How to remove this error and how to install the printer without this problem?

  Hi @tstyam,

  Thank you for showing your interest in the HP Forums!

  I understand that you are experiencing this error "Hewlett-Packard - Company WSD multifunction printer, MFP, other materials - Null Print - 5660 HP ENVY series - error 0x800f020b". I'd be happy to help you with this.

  It seems that there is a driver on the computer. If you have just installed Windows or a device and the Device Manager has 'Unknown devices' or 'other devices '. This means that they are in a State of error or without no driver installed.

  To resolve this issue, remove the "unknown device" or "Other devices" and run Windows Update to fix the problem.

  1. Go to settings, then select devices.
  2. Click on connected devices.
  3. Click on Device Manager.
  4. Open Printers and then uninstall/remove/delete the "unknown device".
  5. Open the devices and then uninstall/remove/delete the "unknown device".
  6. Launch Windows Update to correct the problem.

  Don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  Reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• HP-Envy 100 D410a just shows (INITIALIZE) is on the screen!

  HP-Envy 100 D410a was printing then stopped. When I turned it back on, just shows the printer (INITIALIZE) is on the screen! It was after I left the power for hours. Can't do anything to the screen.  My firmware Version is: SLM1CN1039FR

  Hello

  If your printer is connected wireless, make sure temporary connect the USB device, and then follow the patch below:

  Windows:

  http://ftp.HP.com/pub/softlib/software12/COL37748/MP-92513-1/D410Envy_FWUpdate_4684_HPCOM_x86_v2.exe

  Macintosh:

  http://FTP.HP.com/pub/softlib/software12/COL37909/MP-92884-2/HP_Firmware_Updater.dmg

  Please let me know if this is useful,

  Shlomi

• HP envy 4520: unable to complete printer does not recognize UK

  problems trying to complete registration. Default country is to the United States and no option to change in the uk and so code postal uk is rejected. How can I continue?

  Thank you. I bought it on Amazon UK. I managed to skirt around the problem I think and can print now.

• iTunes exe file fails to complete the download for windows surface 3 pro 10

  When I go to the itunes store and download itunes for windows, download appears to move, but when you are finished, he said that the exe file failed to download.  I have 3 pro surface, running windows 10

  If you have trouble downloading the installation file from iTunes to the current address try; Uncheck the box "Keep me updated", clear the cache of your browser, change the settings of the blocker, a right-click or ctrl - click on the download button, using a different browser, or by using the direct links here.

  See troubleshoot problems with iTunes for Windows updates if you have additional problems at the facility.

  TT2

• Pavilion g4-1117DX: fail to complete the restore of HP. Error mess - 'Error of CTO Flg' + ' [205] UIA writing failed 3 times!

  After failing to recover my system from hard on the D-disk partition recovery software, I bought HP Recovery disks from HP support turned on the PC and installed the first disk according to the instructions. I also pressed ESC on powerup and then selected F9 to boot from the DVD. After 5 minutes of access to records of HP recovery in the DVD player, an error message led indicating that "HP restore incomplete". I looked at the details of the error and showed an other error message stating "[205] UIA writing failed 3 times! In any case I try to do the PC recover either by the recovery using the HP Recovery Manager Software Manager & recovery on the drive partition hard D or using the HP Recovery DVD s I get two ways the same 'error CTO flg' + ' [205] UIA writing failed 3 times. Anything else that can be done, please?

  Thanks for the reply. Since I posted my problem on this Forum description, I worked directly with the HP Support and finally concluded that I have needed to push the F9 key button immediately that the PC has been poweringup. Do this correctly then leave the HP recovery disks provided (I bought them from HP) be read by the system and recovery properly executed.

  But it shows there is some question buggy with the test drive HP I ran several times and each time has shown an error message of hard drive with result [305] and also [303] - that led me to that almost an expensive for a 320 GB hard drive HP replacement purchase.

  Fortunately HP support people were so full with me and kep remember to follow-up with me to see how I was doing and then I got my laptop HP back from work. otherwise I would have made a mistake and installed the third disk, driver HP disk - and his great work now faster than ever.

  Thanks Hewlett Packard.

  Actually, I was aware of this type of support for HP since the 1970s, when I buy and install servers HP A2100, then servers HP 1000 HP 9000 server, and I have met and had presentations from the team of engineering and management in California from HP this for me and my boss the next type of systems that HP grew for the future and then the HP - DEC ALpha - all this for machinea the best range of computers with the best support for ground control systems (GE Americom in time) operating a critical General Electric fly over most of the commercial SATCOM satellites in the United States.  Even if I quit this job just now, HIS AMericom always uses HP to fly to the top of 20 + satellites over the United States and around the world.

  Shows just why HP is the longer computer company and will continue to be!

  My support case number was 3013351909 so that whoever the Lady of HP support could get credit for its excellence and how she persisted on its initiative of checkin continuously with me and guide me and helped to stop me from buying a disk hard when I didn't need to.

  Thanks HP and what concerns the life long realtionship with me!

• How can I correct direct3d functionailty problem isn't available, get error message: failed to display initialization

  When I play a part of the computer comes up with a direct3d error message feature is not available "failed initialization of display.

  I downloaded what I thought, it was the most recent update of windows updates current direct3d, but it does not solve the problem.

  How can I fix it?

  Hello

  · What game do you play?

  You can follow the steps from the link: DirectDraw or Direct3D option is unavailable: http://support.microsoft.com/kb/191660

  For reference: Age of Mythology: you receive the "Initialization failed" error message after the video clip introduction when you try to start Age of Mythology: http://support.microsoft.com/kb/811553

• 5510 printer/Mac 10.7 fail to complete the installation after said to unplug the USB.

  Have installed the relevant software & drivers such as advised by Apple/HP as disc not suitable for my Mac 10.7. After going through the installation process complete Mac fails to find the printer wirelessly after saying to unplug the USB cable. The printer indicates that there is a wireless connection to my router wireless of AOL, but still I get the message "select devices below" but having contracted the USB cable, there is no display device.

  ... Hello again.

  It seems now that HP Support have found the problem so let me give you some information.

  I called the Apple Technical Support on the advice of the staff of the local Apple store but it told me that it is acknowledged as a problem as Apple have already tried to solve the problem and failed he spent on HP.

  I spent 50 odd minutes on phone to the call center of Newcastle (which was fantastic) and now upward and the operation.

  We have downloaded 2 updates of for Mac and printer 5510 (firmware).  In the preferences system (Print & Scan) the file sharing box has been checked (and also ensured that the sharing printers, file sharing and the sharing of scan have been checked).  This has allowed to get up and running with print but then had a problem with scanning.  We then cut to reset (in that order)-router, Mac and printer, then turn it back on in reverse.  Then we have the source of installation of scan in the menu of applications under Hewlett Packard/HP Scan 3.

  I hope this helps.

  John

• Windows 7 backup system Image - 0x8078012D error Code - fails to complete system image backup?

  I seem to have a problem with the Windows backup when a scheduled backup image on a hard drive external fails to finish, although she worked successfully before many times.  Backup Windows reports an error code of 0x8078012D.

  I ran the tool of error checking on the external hard drive with running repair options, but no problem discovered.  The external disk drive seems ok because I use a Norton program to back up data on the same drive with no problems.  Also Windows backup will happily make a 'non-system image' backup on the external drive.

  But it is not an image of the system stand alone, or as an add on the a normal backup.

  Any advice?

  Thank you
  David

  After many tests on the solutions listed here, I found a way to fix my problem. I had continually failure is to say the system could not create a snapshot or that my drive has been a failure. It seems, with Windows 7, you must configure options that are not obvious to the users.

  1. go to control panel/system/System Protection and select your C: drive.

  2. Select "set up" and make sure "Restore system settings and previous versions of files" is on.

  3. the Max use value at least 2%

  4. apply

  5. Select your key USB you will use for backup and configure it again to the protection and the whole file size of at least 18%.

  6. apply

  7. in the control panel go to administrative tools, open Services.

  8 scroll down until Windows backup and make sure it is set to manual and not started.

  9. highlight Volume Shadow and make sure it is also set to manual and not started.

  10 10 aller go to control panel, select backup and restore.

  11. click on "Change settings", and then select the drive you will support up to.

  12 run backup let the system do its thing and everything should work.