Set the variable to the text entered in a text box

Similar Questions

• Set the text box

  Could someone tell me how I can get the blocks of text that are automatically adjusted to changes in the margins?  After creating a document and put in all the stories and images, we realize that an adjustment is required to the margins, which would in turn ensure that we would need to set the text of the documents field to align with the new margins.  We can do it by hand, but it will take time and also complex that InDesign is that it seems that we should be able to do this automatically, but how?

  Depends on how you set up the document in the first place. If the text block is aligned with margin guides, allow the adjustment of the layout and change the margins of the master page.

  Bob

• CS6 inDesign when the text box is set it is not adapt the text with it

  Hi Adobe community.

  In the past, I have been using Adobe CS5.5 and when you use Indesign I would like to make a text box, text entry and when I need the text box to be narrower, as I'm adjusting the box with the text selection tool would be admissible and move and adjust to fit within the box like you were changing the text box. So, you could see the text as you did the box around it more small.

  Now, I just went to do the same in InDesign CS6 but when move the text box, it simply moves the text and the text moves with it (do not meet with setting the text box), so I'm left guessing where the text will be sitting and it provides a few going until she I understand...

  So what I am asking, is there a box I need check preferences or something in CS6 so that text moves I adjust its bounding box, as it moves in CS5.5?

  Please help because it really bugs me!

  Thank you

  Try to screen Live Edit/Preferences/Interface/design/immediate

• How can I get student got points in the text box

  Hello
  
  My problem is
  
  a student has a 5 subject .is there sort of set the text boxes according to these subject.if all have topic 6 then 6 text box should appear.
  is this possible.please suggest me
  
  
  
  
  
  Thank you
  Nisha
  
  Published by: Nisha Rani on September 3, 2009 23:14

  Hello

  There are a number of topics? You can create a form on your table that has all THE topics on it and then use a setting of Condition to hide the ones you don't need.

  Andy

• Script to change the fill color of the text box when the text is entered

  Hi all

  I'm working on a creation of a PDF form with a lot of text fields and I was wondering if it is possible to write a JavaScript script that will set the background color of the text box to white If the user enters any textand transparent otherwise. Any ideas?

  Thank you

  Zet

  Of course you can. You can do this during the Validate event, for example:

  Validate the script

  event.target.fillColor = event.value? Color.White: color.transparent;

• the value of variables in the text box.

  I write a code that has a function of function there is a table of the different variables of table, values come from Server I'd like
  Enter this value of var in the text box.
  
  It's like in the code file is like this
  
  public void mainMenu (rcvParametersArray:Array): void {}
  
  var IndianMenu:int = rcvParametersArray [0];
  var chainesMenu:int = rcvParametersArray [1];
  }

  Assuming a component textArea on the stage, something like the following should work (composed an array to pass to the):

  var theMenus:Array = [1,2];
  mainMenu (theMenus);
  function mainMenu(rcvParametersArray:Array):void {}
  var IndianMenu:int = rcvParametersArray [0];
  var chainesMenu:int = rcvParametersArray [1];
  arrayDisplay.text = IndianMenu + ', ' + chainesMenu;
  }

  However, it seems that he might extend to several items, I was wondering if maybe you don't want to have an array of arrays so that the menu name is incorporated with its index or regardless of the other properties are associated with. Maybe not, but I thought that I would say something like the following in case it is useful

  var theMenus:Array = new Array ({name: 'Indian', index: 1}, {name: 'Channels', index: 42});
  mainMenu (theMenus);
  function mainMenu(rcvParametersArray:Array):void {}
  for (var i: int = 0; i< rcvparametersarray.length;="">
  arrayDisplay.text += rcvParametersArray [i] .name + "" + rcvParametersArray [i] .index + "\n";
  }
  }

  Finally, if the values in the table of your original paintings are numbers or integers (ints), you can convert them to strings before displaying using the toString() function, unless they are be concatenated with an existing string.

• How to enter special characters/symbols (i.e. the degree character) in the text boxes?

  Not a problem/w Firefox - I was wondering if there is a way to enter the special characters and characters (not on the keyboard) in the text boxes? I remember that there is a keyboard sequence that activates a context menu allowing the single character/symbol entry. Thanks in advance, Allan.

  See:

  • http://en.Wikipedia.org/wiki/Windows_Alt_keycodes
  • http://en.Wikipedia.org/wiki/Character_Map

• How to set the text html for a label?

  Hi all

  I'm trying to set the text html for a label programmatically by using the following code

   tourDescriptionLabel->setText(""+tourDiscHtmlString+"");
  

  but unfortunately my display of the label

  Some text’s most known 
  

  I tried with this in webView has achieved the same result. I'm getting response json string. I've hardcoded, the response data such cases it shows how reqular.

  Thank you

  Dembélé George Jacob

  I got it

  Thank you for your support

  QString tourDiscHtmlString                        = tourSummary.value("tour_desc").toString();
      QTextDocument text;
      text.setHtml(tourDiscHtmlString);
      QString plain = text.toPlainText();
     tourDescriptionTextArea->setText(""+plain+"");
  

• Setting the text labels programmatically.

  I'm working on a project that requires a lot of labels and text fields (lets say more than 100). I want to:

  • get/set the text in a label
  • get/set the text in a textfield

  I can do it manually, but is it possible to do programmatically (i.e. run it through a loop), preferably in QML on C++. Any help will be appreciated.

  you could add the textfields to a data structure (in addition to container) and go.

• How can I set the first row is 0, depending on the text box

  How can I set the first row is 0, according to the text box selected_text_to_inlineobj.jsx

  
  

  https://gist.github.com/milligramme/9368861@

  Try this,

  function boooxed (object_style_name) {
    if (app.selection.length !== 1) return
    var doc = app.documents[0];
    var sel = doc.selection[0];
    if ('baseline' in sel) {
      var bx = sel.insertionPoints[0].textFrames.add();
      bx.appliedObjectStyle = doc.objectStyles.item(object_style_name);
      bx.geometricBounds = [0,0,5,30];
      sel.duplicate(LocationOptions.AT_END, bx.parentStory);
      bx.insertionPoints[0].firstLineIndent=0;
      bx.fit(FitOptions.FRAME_TO_CONTENT);
      if (sel.contents.length) sel.remove();
    }
  };
  
  var object_style_name = "AAA"; //set anchored object settings, textframe preferences, and more
  boooxed(object_style_name);
  

  Vandy

• Set the focus to the text box of the embedded NumericStepper control

  I have an application that requires I use NumericStepper edit control as ItemEditor of a DataGrid column.

  I have two problems that I can't seem to overcome, one being the result of the solution to another:

  (1) I need to instantiate the component NumericStepper during execution, because I don't ' know advance what columns it will require.  More important still, I need to specify default attributes (styles, min, max, width, etc.).  I can't understand how to specify these attributes other than in a .mxml file.  To handle this, I have crreated a component 'wrapper' that's an HBox with a NumericStepper inside her, and I can specify my attributes on the tag NumericStepper.

  (2) now that I did #1 above, although, when I click a DataGrid cell that uses this component editing, the editor comes back but the text box is NOT centered, which means that the user must click a second time if he wants to type a number.  It's very irritating, but I do not know how to manage the focus such as when my HBox-with-embedded-NumericStepper' control rises, it concentrates and its selected data, NumericStepper, just as the 'base' is.

  So, my questions are:

  (1) can I somehow assign property values to a standard when executing NumericStepper, so that I can avoid using my built-in custom control HBox?

  (2) how can I manage the focus so that when my control HBox is in place, the text box is selected and fucused?

  That sounds confusing, but I have a small program to demonstrate this.  The "QtyBad" column uses my own NumericStepper HBos-based and not to be put in the correct focus when activated.  The "QtyGood" column has demonstrated APPROPRIATE behavior, as exposed by the native NumericStepper component, but I can't specify additional attributes / s on this subject.

  Here are all of the program - called "DGNumStepperDemo" - here:

  DGNumStepperDemo.mxml

  <? XML version = "1.0" encoding = "utf-8"? >
  " < = xmlns:mx mx:Application ' http://www.Adobe.com/2006/MXML "layout ="absolute"creationComplete =" onInitialize () "> "
  < mx:Script source = "DGNumStepperDemo.as" / >
  < mx:DataGrid id = "dg1" editable = "true" top = "20" left = "20" width = "350" height = "124" >
  < / mx:DataGrid >
  < / mx:Application >

  DGNumStepperDemo.as

  
  

  ActionScript file
  Import mx.collections.ArrayCollection;
  Import mx.controls.DataGrid;
  Import mx.controls.dataGridClasses.DataGridColumn;
  //---------------------------------------------------------------------------------------- -------
  [bindable]
  private var gridData:ArrayCollection = new ArrayCollection([{Qty:0},{Qty:5},{Qty:10}]);

  private function onInitialize (): void
  {
  CDL of the var: Array = new Array();
  var dgc:DataGridColumn;

  DGC = new DataGridColumn ("QtyBad");
  dgc.dataField = "Qty";
  DGC. Width = 75;
  dgc.itemEditor = new ClassFactory (EditorDGNumericStepper);
  dgc.editorDataField = "value";
  cols.push (DGC);
  
  DGC = new DataGridColumn ("QtyGood");
  dgc.dataField = "Qty";
  DGC. Width = 75;
  dgc.itemEditor = new ClassFactory (mx.controls.NumericStepper);
  dgc.editorDataField = "value";
  cols.push (DGC);

  DG1. Columns = cols;
  DG1. DataProvider = gridData;
  }

  EditorDGNumericStepper.mxml

  <? XML version = "1.0" encoding = "utf-8"? >
  " < = xmlns:mx mx:HBox ' http://www.Adobe.com/2006/MXML ""4"verticalAlign ="middle"paddingRight ="4"paddingLeft = verticalScrollPolicy ="off"horizontalScrollPolicy ="off"> "
  < mx:Script >
  <! [CDATA]
  public function get value(): number {return itemQuantity.value ;}
  []] >
  < / mx:Script >
  < mx:NumericStepper id = "itemQuantity" value = "{data.". Qty}"minimum maximum ="0"="100"/ >
  < / mx:HBox >

  If anyone who bothers to run it, you can see what I mean about the focus problem in the QtyGood and QtyBad columns.

  Any help is appreciated!

  Quick response to the #2 is to change the EditorDGNumericStepper.mxml to the following:

  
  http://www.adobe.com/2006/mxml"
             verticalAlign="middle" paddingRight="4" paddingLeft="4"
             verticalScrollPolicy="off" horizontalScrollPolicy="off"
             creationComplete="focusManager.setFocus(itemQuantity)">
       
            
       
       
  
  

  The only thing I did was put the NumericStepper to 100% width so it fills the column like the standard NumericStepper and it looks a bit better and I added a creation complete event handler that sets the focus to the NumericStepper.  I tested it and it will be emphasis each time on it like a standard stepper.  There may be a more "preferred" way, but it's simple and effective.

  On the #1 question, you want to change the properties, styles, etc. of a NumericStepper standard once it has been added to the data grid?

• CS3: How can I set the text of a button widget in my control panel?

  Hello

  I have a panel with a PanelObserver. Now, I like to set the text of a ButtonWidget of this Panel.

  How can I do?

  Thank you

  Hans

  Oops, make that ITextControlData.

  Take a look at CDialogController.cpp for some ideas of code.

  Dirk

• Enter several values in the text box, separated by commas and spaces

  Hello
  
  I have the following syntax as my request to report to the opening of user_names in the area of text separated by commas, but the user sometimes come with a space between commas, could someone please let me know
  How this can be controlled, both when the user uses the space or not use space as well as the comma recording several user names in the text box?
  

  select 
  *
  from   DW_RFA_JOBDATA
  where  FINISH_TIME >= :P1_START_DATE 
  and FINISH_TIME < :P1_END_DATE
       AND  instr(',' || :P1_USER || ',', ',' || USER_NAME || ',') > 0
   OR (USER_NAME = USER_NAME AND :P1_USER is null)

  Thank you

  Select
  *
  of DW_RFA_JOBDATA
  where FINISH_TIME > =: P1_START_DATE
  and FINISH_TIME<>
  AND instr ("," |) REPLACE (translate (: P1_USER, '! @# $% ^ & * () _-+= {[]}] |------:; ~ ',' '),' ', "). ',', ',' || USER_NAME | ',') > 0
  OR (USER_NAME = USER_NAME AND: P1_USER is null)

• Test whether the text box is empty - tip action

  Hello

  I have a form that the user is required to fill out. When the user tries to advance to the next slide, I would test to check that none of the text boxes are empty.

  Ideally something like;

  If ((Textbox1) == null) {}

  See the legend of failure

  } else {}

  continue

  }

  I know you can use advanced actions but I'm unable to set the null value. I even tried to create a new variable and leave empty and tests textbox against that, but apparently not worked either.

  I'm probably missing something simple as I am very new to Captivate.

  Is it possible to submit the code of the advances in stocks using AS?

  Any help would be greatly appreciated!

  Concerning

  Tim

  Hello!

  I had the same problem.

  The user must enter his name.

  I preset the variable of the text using the feature box "what would happen if you reach this slide." You can find it if you double-click the slide with your text box, and then find the area of "navigation". I have a German version of the A4 the names of functions differ...

  Declare the variable of your text box we'll say "ABC123".

  With a collateral action, you can check if the text inside the variable passed as ABC123 to something else:

  If

  variable_name is not equal to ABC123

  then

  ...

  on the other

  ...

  If the variable is always ABC123 I jump to another slide with an error message.

  An example, which you can find here:

  http://forums.adobe.com/thread/446449?

  Kind regards

  Markus

• Regarding events for the text box

  Hi all,

  I'm new with the Labview I have it the simple program I use the tab control in the tab control I have set Num control a (text box) in the tab 1 and Num B in the tab2 and control on the front panel, I place the indicator of Num C.I want when I set the value of a control number and enter then value goes to the led num c.Simillarly when I put the value B number and press on enter, then the value of B will go to the num indicator. How do I put the event on the text box as the value of A or B num command will go num indicator capers press on enter for the number corrosponding control.

  Due to the fact that I can't delete my post, I'm editing only say I am ashamed of what my response was completely wrong because of the mistake of reading your question :/

• cannot delete the text box entry - break cp8

  I have two text input boxes and a button smartshape on a slide.

  Text entry areas require username, stores the responses into variables. The button moves to the next slide. I don't want the button to pause the slide, but not text entry areas.

  When I uncheck the 'pause after"in the properties of the input synchronization for each of the text boxes, the break is always carried out for each. In fact, icon pause shows still on the layer of the timeline for each as well.

  The result is that my slide stop 3 times instead of once:)

  It's Captivate 8, sensitive project.

  It is for some a bug in CP8, in previous versions you can change the time of the break, but you can disable it. Must be a design fault, using the same properties of timing for each interactive object to CP8 (to make it "clear").

  For me, it makes sense that you can't disable pause in BER, since it must wait for an input from the user. It's the same for question slides, no way to disable the pause, you can move only. For BER you can move with the synchronization properties, which is not yet the case for Question slides where you (still) that slide on the Timeline can move the point of interruption.

  Why should you get this button? If it is designed as a next button, do you want so that it can move without entries in of the TEB? Then set its action to 'go to the next slide", not to continue?

  Lilybiri