Interface between the browser and my app.

Similar Questions

• It is possible to create an interface between the host and the VM

  It is possible to create a virtual switch between esxi host and a virtual machine.  I know that technically I can get to the esxi host for the virtual machine in the virtual machine network and back into the host esxi during the port of the kernel.  But we wonder if it is possible to have a private network setup so that the VM guest can talk directly to the shell host secure without leaving the network?

  Yes you can - create a virtual with a vmkernel port and a port of the VM of the group as long as they are on the same segment that traffic will not leave the ESX host

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• What are the relationships between the logging and IKM?

  What is the best method to use in the following scenario:
  I have about 20 tables with the large amount of data sources.
  I need to create interfaces that join the source tables in target tables.
  The tables are inserted every few seconds with about hundreds of thousands lines.
  There may be a gap of a few seconds between the insertion of different tables that could be attached.
  The source and target tables are on the same Oracle instance and schema.
  I want to understand the role of: 'Logging CDC' and "IKM - incremental" and
  How can I use it in my script?
  In general, what are the relationships between "Logging" and 'IKM '?
  Use both? Or maybe it's better deelte and insert the target tables?
  
  I want to understand what is the role of "Logging CDC"?
  Can 'IKM - incremental' work without "logging"?
  Must 'Logging' have PK on the tables?
  What should I do if I can't say PK (there may be several identical lines)?
  
  Yael thanks in advance

  user604062 wrote:
  Hello
  Thanks for your quick response!

  No probs - its still fresh in memory I did a major project on this topic last year (400 tables, millions of lines per day (inserts, updates, deletes), sup-5 minute latency). The problem is it isn't that well written on the web, that you have read the blog of the example I linked to in my first answer? See also here: http://odiexperts.com/changed-data-capture-cdc/

  Always on logging:
  My source table is inserted all the time.
  The interface to join the source table in the target table.

  In ODI, the correct term would be your source table "fits" in the table target, unless you mean literally that want to join the the source with the taget table table? My question if you want to do with the result of the join?

  What exactly the "journaling" CDC updates?
  It updates the model of ODI? interfaces? The source of data in the model of ODI? The target table?

  Logging CDC configures and deploys the data capture mechanism (Triggers or log based capture, IE Logminer/streams/Goldengate) - it is not updated the model as such, she pointed out the metadata of the model of ODI repositoty as a CDC data store, allowing you, the developer say ODI to use log data if you wish (reported in the interface) There is no change in the target table, you get an indicator of metadata (IND_UPD) against a line during the integration (in C$ and I have tables$) that tells you if its insertion (I) and update (U) or deletion (D). It had ' lines allow you to synchronize the deletions, but yoy say its inserts only then you probably used use this option. "
  So the only changes are the source table to your interface, another diary data (if you use logging) or the table of the actual source (if not using the logging).

  This is the main thing that I don't understand!

  I hope I made a little clearer.

  Try the following as a quick test:

  Reverse a source table an engineer and the target (at least) table.
  Import the update incremental LKM and IKM.
  Import of the JKM you want to use.

  Create an interface between the source and the target without any deployed JKM.
  Configure the options of JKM on the model, the "Start log" to start the process of capture - this is quite a complex stage and a lot of things to understand what is happening in the source database, better to check code ODI sends to the database and to review the documentation of Oracle database for a description of what his weight (instantiate Tables (, sets of creating change, creation of subscribers etc. establishment of newspaper groups, creating views Journalising etc.) -you will need to consult your Source DBA database initially as ODI wants to make many changes to the source DB (in mode Archivelog process max, parallelism, size, Java etc.)

  Now, edit your interface and mark the table source for use "Journalized data bank.
  Restart your interface
  Compare the difference in the generated code in the journal of the operator, see the differences of the operator.

  >

  Thank you, Yael

• synchronization between the editor in the browser and file failing muse

  In the past I had problems with changes in the browser to a client site hosted on Business Catalyst not successfully implemented Muse who have never explained Re: Muse is not merge changes

  Last week, I got a trouble with this same site (opbarks.com) and have a frustrated customer, angry as a result. Restore things, here's what happened:

  Last week, when I open my file of Muse, I sometimes got a notice stating that the site had changed through the editor in the browser, and I agree to incorporate changes. However instead of the request for review and merge the changes, the window has very quickly to full synchronization screen.

  

  I thought that maybe site changes had been made and then cancelled or returned back to match what I already had so so no change despite the alert - or that Muse was just confused. So I continued to work on the site and published some tests I did with Wufoo forms. Unbeknownst to me, I had crushed my client did to two of its significant changes classes pages. Annex OpBarks Sweet Spot cottages Quakertown   and OpBarks calendar Little White Dog East Falls

  Before you crush me, my client had used in the browser edition to publish information for may and June classes. Because my Muse file has not been updated (because no changes were to merge), I published the outdated class dates and descriptions on my customer changes. First noticed my client (because one of his customers asked when she could run classes), she thought that maybe amended no had not stuck because she forgot to hit publish them in the browser - then blamed editor itself. While she paid his assistant to redo the changes and they both checked the site online to ensure that may and June were posted. They have been. They don't have to tell me about it and it wasn't until they looked back a day later and seen their changes went even once they contacted me to help solve. Turns out that the dates of their endangered changes coincided with the time Muse told me the site changed, but had then no changes to show me and I had published it. Beyond technical frustration and overtime costs, my company customers was hit - registration was non-existent because customers could see only old and outdated classes.

  
  

  Temporary workaround: now that we have understood what the problem was (bad timing), my client is pay me to make any changes directly in the Muse and publsih until we can trust the synchronization again. Of course, we could continue to use the editor in the browser and if I get a alert Muse change, but no change to merge I will not post and he will ask my client if she has made changes. But it does not solve much - I have no way to get my Muse folder to update without doing manually what is already done in the browser.

  
  

  I'm looking for an explanation or if it is a bug, I would like assurance that she is treated and want to know when I can sync trust to accomplish his task again.

  
  

  In case it helps to solve the problems, I am totally up-to-date on Muse software and faithfully were rename files .muse publishes in the browser do the merge (a solution that I read on a forum somewhere). I don't know what else to try. This is a link to the muse file that do not correctly accept the changes in the browser. Dropbox - opbarks_Apr22 - 2015.muse and it's a current a Dropbox - opbarks_Apr29-2015-for - AdobeHelp.muse I can not always going to work. (more on that below)

  
  

  ------
  

  
  

  Re: Dropbox - opbarks_Apr29-2015-for - AdobeHelp.muse to make it worse, I did a test see if I could reproduce the error. Successfully, I got a change in the browser, I did to the homepage of bend in my file of Muse. BUT I can't get a small change, I did to OpBarks annex Sweet Spot Farm Quakertown able to trigger an alert in Muse that an amendment was filed and manually using file > synchronize with the web version displays a window that says no changes detected.

  
  

  
  

  It's small change I made to the editor in the browser. Add a hyphen and has published.

  

  
  

  My Muse file may not see the change.

  

  
  

  He has given some time and closed my file of Muse, reopened and I always get a message "no changes detected.
  

  

  Yet once again, I would like your help to understand this.

  
  

  Thank you

  Janine
  

  Hi Janine.

  There are a handful of circumstances that may prevent the Muse of the merger successfully completed through editing in the browser changes. One of them is the invalid HTML markup on your page.

  This seems to be the case with OpBarks annex Sweet Spot Farm Quakertown

  Specifically, the HTML for the form at the bottom of the page is not valid. Do you remember how you got/integrated HTML?

  Thank you

  Abhishek

• synchronization between the iphone and windows 7

  Can I synchronize excel and word between iphone and windows 7?  How?  CAN I get excel and word or compatible programs (aps) on iphone?  Also - I have an old version of MS Outlook (2002, 10.6 V, SP3) I want to be able to sync with the calendar on the iphone.  What can I and how?

  Also - I do not trust "the cloud."  How can I synchronize and transfer stuff between the iphone and my computer (win 7) without putting them on the cloud?

  Don't have an iphone yet, this will be my first smart phone.  Being able to use the above programs and stay out of the cloud are my priorities.

  Thank you

  Word and Excel:

  https://iTunes.Apple.com/us/app/Microsoft-Excel/id586683407?Mt=8

  https://iTunes.Apple.com/us/app/Microsoft-Word/id586447913?Mt=8

  Yes, you can sync if you store your documents in the cloud, but you do not trust so the answer is, you cannot them synchronize the.

  lar136 wrote:

  Don't have an iphone yet, this will be my first smart phone.  Be able to use the above programs and stay out of the cloud is my priorities.

  Don't get an iPhone. I think the Android device is a better solution for you.

• In preferences, search option is missing between the general and the content.

  I use Firefox 40.0.3 on OSX and I tried to set the search parameters. When I go into Preferences, I don't see the search catgergory. If I remember correctly there used to be between the general and the content, but it just disappeared. I was wondering if there is a way to recover or if these options have been moved to another location in the new version.

  I restarted Firefox in safe mode to disable all addons. It is not yet here.

  You have disabled browser.search.showOneOffButtons [set this pref to false] in Subject: config?
  Enter about: config in the URL bar and press ENTER. then use the search box at top.

  Options > Search "tab" disappears when this pref is toggled to false. Search preferences back to the old system where the 'controls' are in the search bar - manage search... engines such as those used before Firefox 34.

• Everyone is having a problem with only being able to do a Google search and then nothing after that. I have to close the browser and reopen it to each search

  Since the upgrade to 12.0, I am only able to do a Google search. After the initial search, nothing happens when you try to make another. I have to close the browser and reopen it to each search. Any ideas.

  Try to start Firefox in safe mode. This mode disables all extensions, customizations, hardware acceleration, etc., temporarily for the diagnosis and troubleshooting. If Firefox works fine in Safe Mode, then it is probably a problem with the add-on. Restart Firefox in normal mode, and then type "subject: addons" (without the quotes) in the address bar. Disable your extensions, restart Firefox between each one, until you find the troublemaker.

  A few other basic problems you can try things is the following:
  Run all Windows updates, install all required service packs, etc.

  Updating your graphics driver (Firefox uses the graphics card for rendering and an outdated graphics card driver can cause problems. https://support.mozilla.org/en-US/kb/how-do-i-upgrade-my-graphics-drivers.

  Update all of your plugins (Flash, Java, etc.): http://www.mozilla.org/plugincheck/.

  Download and install MalwareBytes Anti-Malware, run a full scan. http://www.malwarebytes.org/. This check allows that there is no virus on your computer, causing problems. You can uninstall this program after having cleaned the infections.

• What is the difference between the IO and line?

  Hi all

  I'm using Labview 7 and in my mahcine I have an installed 6013 card. However, there was an interface card designed by someone else long ago, on the table, only AO0, AO1,..., A07, DIO0, DIO1,..., DIO7 were printed. In the program, I saw some code to write to digital Line.vi allows you to send data to the digial io. Say that I write for DIO 3, so I understand here DIO 3 means the channel of e/s 3, but online? What is the difference between the channel and the line? When I write the data to a single channel of e/s, are us wriitng a byte or a bit of it? Thank you.

  A channel is usually used with inputs/outputs analog.  Each AI or AO is a string.

• Open the browser and the application exits

  Hello

  I need to open a browser with a URL and close the application (which started the browser).

  I need this behavior for improving the application.

  OS > = 4.5

  I read http://www.blackberry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800440/How_To _...

  If I use launchBrowser() (BlackBerry Device Software prior to version 4.0), I get an exception ControlledAccessException.

  Also, I found the net.rim.blackberry.api.invoke.Invoke class, but I don't see anything on the browser.

  If I use Browser.getDefaultSession () .displayPage ("http://www.BlackBerry.com/fr");  the browser appears, but when I want to finish the application, the browser closes too.

  How can I open the browser and 'kill' the application?

  Thank you.

  I wrote once the weblaunchers for blackberryforums.com, some time ago...

  I use the app as a base class and call the code you mentioned:

  Browser.getDefaultSession () .displayPage ("url")

  and for good measure also

  Browser.getDefaultSession () .show)

  the finishs application just up and running with this spell, the browser continues.

  in fact the browser is never closed, he always runs in the background.

• Relationship between the list and ListField...

  Hey people of Java...

  I can't thank you enough for your answers because I'm really starting to "grok" the paradigm of Java.

  Another came today I'm having problems understanding I deconstruct this app MemoryDemo...

  In the screen of the demo is these two lines:

  Get and display the list of customers.
  _customerList = CustomerList.getInstance ();
  _customerListField = new MyListField (_customerList.getNumCustomerRecords ());

  Well, now I understand the first line perfectly. She develops an object with the contents of the customers it contains.

  The second line calls a custom ListField routine that I show below:

  the final private class MyListField extends ListField
  {
  public MyListField (int numEntries)
  {
  Super (numEntries);
  }

  }

  Here is the part that I don't understand:

  It seems to appeal to both the MyListField() and the super() is simply the NUMBER of elements required, but not * that * list to use.  Exactly how is MyListField() or super() knows how to use the list of customers?  I ask because this exact routine is used a few lines more later (in the part of the main screen) to do the same thing for a list of the records of the order - even once without any reference to which list to use.

  It doesn't seem to be an explicit connection or the relationship between the _customerList and ListField is building.  Is somehow deconstruct '_customerList.getNumCustomerRecords ()' to its root and use _customerList somehow?  I don't think that I changed the call to this:

  _customerListField = new MyListField (_customerList.getNumCustomerRecords ());
  _customerListField = new MyListField (PICK_A_NUMBER);

  Where the constant is: public private static final int PICK_A_NUMBER = 50;

  And he ALWAYS displays a list of customers (though now with only 50 files).  How to do know?

  Thanks in advance!

  -John

  "I guess that somewhere in the interior architecture of the ListField, he knows that he has to paint the whole - one at a time - when put on the screen - that's it."

  Fix.

  This is the great thing about ListField.  It attracts only those who are on the screen.  If you use ListField draw a list of 10,000 rows (I tested), and it will only extract and draw the 10 that he needs.

  "Again, I don't find any explicit loop where it is through each element and then calling drawListRow()."

  Good yet once, it is not there.

  "Maybe one day I'll be able to pay it back here."

  It would be great.

• What is the difference between the 9500 and the 9530 smart blackBerry STORM phones?

  I was wondering just what was the difference between the 9500 and 9530 STORM?  I have a 9530. But isn't sure if the 9500, apps, etc. are compatible with the 9530.

  Tell you the OS flow, okay.

  No, the OS files are specific to the models and every OS file begins with the model number, it is destined.

• EIGRP running between the router and ASA by switch

  Hello

  Is that possible I can running an EIGRP between router and ASA by switch?

  Router and ASA connected to the switch with static route.

  Hi Tommy Chin.

  It is possible, we must advertise to the route between the router and ASA.

  Please provide your connectivity diagram to better explain.

  For example...

  interface GigabitEthernet0/0

  Description links to WAN router

  nameif OUTSIDE

  security-level 50

  IP 10.1.1.1 255.255.255.192 ensures 10.1.1.2

  Summary-address eigrp 100 10.1.0.0 255.255.0.0 1

  !

  Confiuration Protocol EIGRP

  standard access list eigrpACL_FR allow a

  !

  Router eigrp 100

  eigrpACL_FR distribute-list in the interface outside

  neighbor 10.1.1.3 OUTSIDE interface

  neighbor 10.1.1.2 OUTSIDE interface

  Network 10.1.1.0 255.255.255.192

  redistribute connected

  redistribute static

  !

  Kind regards

  Srinivas.

  Note: if it solves your problem it mark it as resolved.

• The difference between the ADR and ADF

  People,

  Hello.   I have implemented PeopleSoft Campus Solution 9.0 revision 5 for a University. I develop the application for Admission online for future student to apply for admission.

  I need to install Oracle ADF (Application Development Framework) or ADR (execution of Application Development) to run my application for Admission online web page for PeopleSoft Campus Solution 9.0, but I do not know the difference between the ADF and the ADR.

  My installations are below:

  Server machine: Oracle Linux 5.10 (64-bit)

  Client computer: Windows XP Professional (64 edition) with the Internet Explorer browser

  Architecture Internet Oracle Linux 5.10 Server:

  (1) database server: Oracle Database 11 g

  (2) the server application: Tuxedo 11 g

  (3) web Server: Web 11 g logic

  (4) browser: Firefox Mozila

  5) 8.53 PeopleTools and PeopleSoft Campus Solution 9.0 R5

  On the download page http://www.Oracle.com/technetwork/developer-tools/ADF/downloads/index.html , there are 2 packages to download:

  (1) execution of the 12.1.3.0 application development

  (2) oracle ADF essential 12.1.3.0

  My Architecture Internet of PeopleSoft as shown above has been working properly for a long time. Logical Web 11g works correctly. It seems that the first 'Application development performance' package also install logical Web server which is not necessary in my machine. In addition, ADR is not free, and we may need to purchase the license.

  Essential because ADF is free and without license fees, I chose Oracle ADF essential 12.1.3.0.0 to develop the application for admission online. I read his paper on http://www.oracle.com/technetwork/developer-tools/jdev/documentation/121300-cert-2164864.html

  9.0 Solution Campus system will be run by a University to do business formally.

  My questions are:

  First of all, what package is right for my application for Admission online Campus Solution 9.0? ADR or essential ADF?

  Second, if choose essential ADF, I have a few questions about the 12.1.3.0.0 ADF to match my installations as below:

  (1) as indicated in the document, ADF 12.1.3.0.0 can work with Oracle Linux 5 & 6 (64-bit) and other operating systems. ADF can also work with Windows XP? Can I install ADF with my Oracle Linux 5 server machine?

  (2) as indicated in the document, ADF 12.1.3.0.0 can work with Websphere Server Application. ADF can work with Tuxedo 11 g?

  (3) as indicated in the document, ADF 12.1.3.0.0 can work with the Firefox browser. ADF can work with Internet Explorer in Windows XP?

  Thanks in advance.

  If you want to use essentials, you must download the package from the essential. ADR is the complete stack where you must purchase a license.

  Timo

• Lack of interface between Apple Photo and items

  Hello:

  I imported my photos of Apple's Photo to the elements.   All the photos are in the elements, but they have question marks at the top

  left corner and I get a photo is disconnected message if I try to change.

  I talked to Adobe Elements cat and they don't know anything about.    (I take it from the search forum that there is no real interface between the two

  applications.)

  Apple has suggested that I have to copy my photos to a USB file and then import items from there.

  Is there a downside to this?   Which will look like the file structure in the elements?    Should I delete the images currently in the elements before importing?

  Thanks for any help you can provide.

  Andrea Bardfeld

  I have

  If I click on the link to the right answer, where it seems that the answer should be, my system is not responding.

• (1) now I use Lightrom 5.7 How to level 6 or CC? (2) what is the difference between the 6 and CC vercion? (3) when I used lightromm 3, inEXIF the distance in metres to the object that I took, in the virsions later that the function has disappeared, I coul

  (1) now I use Lightrom 5.7 How to level 6 or CC?

  (2) what is the difference between the 6 and CC version?

  (3) when I used lightromm 3, I could see in EXIF distance in metres to the object that I took, in the virsions later that the function is missing, it is very sad I am stiil waiting and I hope it would be possibble in new versions. Or this indication may possible by setting?

  (1) now I use Lightrom 5.7 How to level 6 or CC?

  Buy the standalone update from here: products

  Download CC version here: Adobe explore desktop apps | Adobe Creative Cloud

  (2) what is the difference between the 6 and CC version?

  See this comparison chart: Lightroom compare versions. Adobe Photoshop Lightroom CC

  (3) when I used lightromm 3, I could see in EXIF distance in metres to the object that I took, in the virsions later that the function is missing, it is very sad I am stiil waiting and I hope it would be possibble in new versions. Or this indication may possible by setting?

  Plugin ExifMeta of Rob Cole displays the distance between the subject field (and much more).  Unfortunately, his Web site seems to be down again.  He has been very active here, but he has not posted in several months.