service pack 3 installation problems.

Similar Questions

• Windows Vista Service Pack 2 installation problem

  I am having major problems installing service pack 2 on windows Vista on a Dell Inspiron from 32-bit. It returns the 8007000D error code.

  I tried the PC back to factory settings, removing the anti-virus and the deactivation of some things non-nessasary start up with msconfig. Also, I have disabled all the wireless devices using a switch on the side of the laptop - it seems that would enable me to install service pack 1.

  Even with all the foregoing it always fails and recommends the system "Update system tool" update running. I have run, restart the computer and run the SP2 and it does not always work with the same error message.

  The only other methods recommended to install must remove antiviris and other programs that I've done so I don't know what to do!

  Help, please!

  Thank you

  Matthew

  Robear,

  Thanks for your reply.

  I looked at the link (http://support.microsoft.com/kb/947366) and went through all the troubleshooting guide without success. With my current attempts to install SP2 (after the return to factory settings), I remove McAfee from the computer (that came with it as default) and then install the service pack SP1 and SP2 by using the stand-alone installation programs by downloading from another computer.

  Thank you for give me the Microsoft technical support link, that I had read on another thread that the free support is exhausted.

  I will try to sue microsoft and come back here if I have any luck!

  Thank you

  Matthew

• Service Pack 2 installation problem

  It's very strange.

  1. the laptop is a Sony where install a Vista - 32-bit clean has been made some time ago, in Portuguese, because he's my friend of the Brazil.

  2. the properties of the computer says that it has installed ServicePack 1.

  3. the update of windows to install service pack 2

  4. I run the SP2 Setup and it is said that it has been installed.

  5. I reboot the computer, check the properties of the computer and it says it has SP1 (not SP2).  and the windows icon appears and says that SP2 is ready to be installed.  So, I ran the installation again and I get the same results.  I did cela 10 times and still the same result.

  6. I download SP2 (all languages - 32-bit version) to my computer so I can try to install it in this way.  When I do that, it gives me a message that SP1 must be installed before installing SP2.  (can you believe it?)  So, just for grins, I download SP1, run the install.  The message that I get when I do this, it is that SP1 is already on my computer.  (ouch)  Now, apparently, there was disagreement with SP1 and SP2 are reports even if the properties of my computer that I already have SP1 installed.  Now I am frustrated and laughing.

  7. so, I ran the CMD Scannow program that someone suggested here and he said that he corrected certain errors.  I ran also register and frag clean disk.  I restarted my computer and see what happens.  Does anyone have suggestions more?

  Thank you

  Mike

  Try first with Safe Mode, see the link: http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode this applies to Vista or you can see the Vista Help for this topic.

  You can try this, if safe mode does not work, clean boot, it event all other programs and services.

  http://support.Microsoft.com/kb/331796
  Good luck!
  Concerning
  Carpet H

  HP Pavilion a6412.sc 4 GB RAM, Windows 7 x 64 Home Premium, Comodo IS 3.13, Samsung SyncMaster T200, Seagate Freeagent 500 GB, HP 1510PC

• XP Service pack 2 Installation problems

  I recently had to reformat my computer and reinstall XP Pro on it. I have already validated my windows. Whenever I try to get service pack 2, however, it gets to the point on the installer where it says 'check product key' (which is almost right at the beginning) and everything goes ever further. No matter how long wait he just stay here on this message. Help, please!

  SP2 installation hangs at step "product key Verification".

  Posted by another user having received a response from the MS Support: -.

  There are 3 steps that we have to do to get SP2 installed.

  The steps are:

  (1) please go to the CMD prompt (start / run--> cmd.exe)

  (2) then type cd /d %windir%\inf and make sure that we are in this directory.

  (3) then type ren oem*.inf oem*.old, he goes back to the command prompt after
  giving you an error (don't you worry about this)

  (4) then type ren oem*.pnf oem*.old1, he goes back to the command prompt after
  giving you an error (don't you worry about this)

  (5) then goto start - run - type '% windir%\inf' and you will see the files in
  the folder.

  (6) then find by name INFCACHE.1 file and make a backup of it on the desktop
  (by copying it to the desktop) and delete the INFCACHE.1 in c:\windows\inf.

  (7) close all windows and restart the computer in safe mode and start the
  installation of SP2 and it should be fine.

  I would check to make sure that you don't know what your product key is before
  attempt of what either especially if it is an OEM version.

  TaurArian [MVP] 2005-2010 - Update Services

• FSX service pack 2 installation problem

  Whenever I try to install service pack 2 for fsx, an error pops up saying error reading the file check this file is one you can access. What it means and how to fix it?

  Additional details: fsx service pack 1 installed correctly but has no service pack 2
   

  FSX SP2 is only for acceleration.

• SERVICE PACK 2 INSTALLS BUT SOON BLOCK BIG TIME.

  SERVICE PACK 2 INSTALLS BUT SOON BLOCK BIG TIME. I tried to install it 4 times. Whenever he works initially but soon has a devastating accident. The screen freezes and goes to a pinkish color ill. I use the system restore and go back before the installation of Service Pack 2. I chipset intel. Inspiron 530 desktop computer. Graphics NVIDIA GeForce 8300. Intel (r) Core (TM) 2 Duo CPU * address email is removed from the privacy * GHz and 32-bit operating system. A way to solve this problem? PS, Currently I have Windows Vista Service Pack 1 installed that works very well.

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• I get the error code 0x800706BE when trying to update to service pack 3 installation did not finish. and I don't have the installation CD

  I get the error code0x800706BE when trying to modernize the service pack 3 installation did not finish. and I do not have the original installation disc

  Go here and download the complete file of the OFFXPSP3 edition: http://www.microsoft.com/en-us/download/details.aspx?id=23334

  This page scroll down and read this paragraph: to install SP3 without the original Office XP CD

• XP Service Pack 3 Installation freezes

  While trying to install XP Service Pack 3, installation blocks every attempt I made at the same place. Then installation seems to freeze, the Setup Wizard reads "Creating cabinets" and the installation window state update bed 'Install Windows XP Service Pack 3 (update 1 1)'

  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718

• installation of service Pack 3 updates problem, asks me to insert the disc

  during the installation of service Pack 3 updates the system asks me to insert the disc of 2002 from microsoft that I did not

  Full version update may request Office source files
  http://support.Microsoft.com/kb/840169

• A security update for the installation of MSXML 4.0 Service Pack 2 (KB954430) problem

  I have a machine with vista ultimate 64 bit with all the updates except:

  Update of security for MSXML 4.0 Service Pack 2 (KB954430)

  who is always on the list and has been "successfully" installed a large number of times, but each time my computer again it's always on the updated list of the things that I need. Any help?

  Hello

  see the sections «How to get help...» "and"known issues... ". "of this MSKB: http://support.microsoft.com/kb/954430.

  Hope this helps, Vincenzo Di Russo - Microsoft MVP Windows Internet Explorer, Windows Desktop experience & Security - since 2003. ~ My Blog: http://blogs.dotnethell.it/vincent/

• VISTA SERVICE PACK 2 INSTALLER WONT says charger not plugged not, but it's

  Hi guys hope you can help im trying to upgrade to vista service pack 2 since the important updates, but whenever I try to download a message that informs you that my charger is not plugged in, but it is connected and it is my phone supported

  my original charger broke and I bought a replacement 1 but it was not the same as the 1 I had before that I don't know if this is the problem or not?

  Thanks for any help

  my original charger was broken and I bought a replacement 1 but it was not the same as the 1 I had before...

  Maybe then, you'll be up the proverbial Creek. That being said...

  Free unlimited installation and compatibility support is available for issues related to Windows Vista Service Packs. Availability of support chat or messaging differs depending on your location. Some questions may require more support for which it has advanced a charge: http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034

  Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Vista Service pack 2 install problem on Dell XPS M1330 with SSD hard drive

  Hello

  I have a DELL XPS M1330 with Solid State SDD drive. None of the solutions have solved my installation problem including run all the tools to clean up the intall. It restarts after installation, then crosses the restart process, then the States 'installation failed' and then back again.
  Vista Ultimate 32 bit, 24 GHz chip. Nothing else cannot simply install service pack 2.

  Thanks in advance for your help

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  [0 x Error 80070002; 0x8007000D; 0 x 80073712; 0x800B0100; & 0x8024200D]
  http://support.Microsoft.com/kb/947366

  =============================

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for Windows Vista Service Pack 2 (SP2) is valid until November 26, 2009. Availability of support chat or messaging differs depending on your location. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft

• Internet Explorer does not work after Vista Service Pack 2 installation with IE 8

  I accepted the installation of Vista Service Pack 2 yesterday with IE 8 upgrade.  Now, I can't get IE 8 or Firefox to connect to the Internet.  I checked my config proxy and it is set to auto detect.  I had Vista analyze my connection with my wireless router and it is no problem. Please notify.

  Uninstall IE8 and see if that helps:

  Click Start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the bad.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• Vista Service Pack 2 installs 64-bit (KB948465) / Service pack has not been installed - Code 80070005 - Windows Update encountered an unknown error

  I have never had a problem with my computer before updating. I looked at various sites in regard to this problem and have noticed that a lot of people's problems with this update. Windows Installer Clean Up tool has failed. I also tried to install this through my anti-virus and that didn't work either. It is a complete mystery. Any help would be appreciated.

  Thank you

  roadbowler74,
  Thanks for posting on the Microsoft Answers community forums.  We want to help you solve your problem with the installation of service pack 2.  There are several things that could cause this problem.  Here's an article in the knowledge base that has some tips troubleshooting step by step for this specific problem:

  http://support.Microsoft.com/kb/947366
  How to troubleshoot the installation of the service pack, Windows Vista and Windows Server 2008 issues.

  The article is too long for me to post this here, so I do not say that you read and follow the steps as it should help you solve your problem.  Please let us know if you need more assistance.
  Thank you

  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Vista Service Pack 1 installs - perpetual loop

  Hello! I was wondering if anyone would be good enough to help me. I'll have the perpetual loop of Service Pack 1 by saying it is installed but is not as he continues to repeat in Windows Update. I made a new reformat and reinstall yesterday to solve the problem, but is happening all over again. I ran the tool Vista only strengthened. I just ran a FixIt and he could not solve the problem of Windows Update. I'm worried about the stability of my laptop. I'm not wonder with computers. It's a Toshiba Satellite A210 Vista 32 bit Home Premium btw. I ran the Windows 7 Upgrade Advisor to see if I could just get the hell outta Vistaland altogether and go to 7, but I need that SP1 installed even for that! Having a nightmare. Help, please. Thank you, Simon :)

  Hello

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you which SP you have installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  See you soon.