Set up for the signature of 10 BlackBerry applications (error: null)

Similar Questions

• A software says I need 4 MB of VM set aside for the program to run.

  Original title: virtual memory.

  How to set 4 MB of virtual memory in windows xp? A software says I need 4 MB of VM set aside for the program to run.

  Hi KennethBrasel,

  Welcome to the Microsoft community where you can find all the answers related to windows.

  According to the description provided, looks that you receive a virtual memory message when installing a program on Windows XP computer.

  By default, the virtual memory paging file that is created during installation is 1.5 times the physical RAM on your computer. Therefore, a computer that has 1 GB of RAM installed will have 1.5 GB of virtual memory.

  You can manually change the size of the swap file to make it larger or smaller. You can also optimize virtual memory use by dividing the space of files between multiple drives and by removing the disks slow or very open space.

  He would be grateful if you can answer this question in order to help you further.

  1. What is the size of your RAM memory?
  2 are. what program you referring?

  I suggest you try the following steps to change the virtual memory:

  a. Click Start, right click my computer and then click Properties.

  b. in the System Properties dialog box, click the Advanced tab.

  (c) in the results pane, click settings.

  d. in the performance Options dialog box, click the Advanced tab.

  e. in the virtual memory section, click on change.

  f. change the initial size value and the value of maximum size to a higher value, click on set and then click OK.

  g. click OK to close the performance Options dialog box and then click OK to close the System Properties dialog box.

  Note: With virtual memory, the computer can use the hard drive as memory (RAM) space. The computer uses virtual memory to increase the ordinary RAM that is installed on the computer. If you reduce the size of the pagefile, some the program may not start correctly or may not start at all. This problem may occur even if the computer has plenty of RAM.

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• I think I bought the wrong to adobe. I was hoping to edit PDFS and make arrangements for the signature and I get to do it with my current plan. Can I ask to sign up for the correct adobe?  I don't know what the creative cloud is all about

  I think I bought the wrong to adobe. I was hoping to edit PDFS and make arrangements for the signature and I get to do it with my current plan. Can I ask to sign up for the correct adobe?  I don't know what the creative cloud is all about

  Look at desktop applications Adobe Creative Cloud | Adobe Creative Cloud to see what is in the cloud and click on the names to find out what each

  Acrobat is what you use to create and edit a PDF file

  If that's all you want to do, you cancel your current subscription and then buy the correct subscription

  This is an open forum, not Adobe support... below to connect with Adobe personnel to help

  While the forums are open 24/7 you can't contact Adobe support at any time

  Chat support: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• I do a layout of paper every two weeks; This time, when I opened my model, set up for the next issue when I typed 'W' to display the grid I have something totally different than previously, a background grid which is more annoying.  Why in the world

  new to InDesign 6 months I do a newspaper page layout every two weeks.  This time, when I opened my model, set up for the next issue, when I typed "W" to display the grid, I have something I never saw elsewhere. ".  The background was filled with a new grid of tiles rather than the void behind the newspaper that I'm used to seeing.  I don't know what happened, but it seems that Adobe has tinkered once more with the program.  The last time this happened, I lost the icon "cover the columns" at the top; now, it's a case of two steps to put the head-lines across more than one column.  NOT useful.

  There is probably a command or a term, I don't know that this right but my main question is why, when I did this dozens of times before, doing something different will come this time.  (I know, without replica.)

  I'd also appreciate comments that someone out there could offer re why now when I tap on InDesign, is there a slight pause before that something happens to the screen.  What is my new Mac, or something to do with the program that I can fix it?

  Thanks, Sacie

  It looks like the grid of the document, which can be disabled in the view menu.

• set up for the BIG - AND - plus size small desktop computer?

  Disappointment, do not respond unless a change do not know.

  Can q. I set up for the two wide and normal sized desk?

  Reactive Adobe Muse CC 2015 is now online. Please install the update of CC > Apps.

  What's new: news summary

  Release notes: https://helpx.adobe.com/muse/release-note/adobe-muse-release-notes.html

  Delicate design:

  Adobe help Muse | Create responsive Web sites

  Adobe help Muse | Responsive web design in Adobe Muse

  Adobe help Muse | Migrate existing Adobe Muse Web sites to answer

  Tutorials

  To get started with Adobe Muse (replaces how to make a website with Adobe Muse (coffee of Katie)):

  - https://helpx.adobe.com/muse/how-to/create-responsive-website.html

  Create a sensitive webpage with Adobe Muse:

  - https://helpx.adobe.com/muse/how-to/responsive-web-design.html (more detailed features RWD of Muse demo)

  Thank you

  Sanjit

• What type of certificates are not suitable for the signature of the extensions to HTML5?

  It is not clear to me, of the literature exactly what types of certificate are not suitable for the signature of the CC2014 HTML5 extensions.

  I used a Thawte 'Adobe Air' certificate for signing extensions based on Flash. It is now expired. Can I buy the same type and that will work cross-platform for the signature of the extensions to HTML5?

  See http://www.thawte.com/code-signing/content-signing-certificates/adobe-air/index.html

  Thank you

  Hi meeky2,

  Required certificates have not changed for HTML5 extensions, so the same type of certificate that you had before work ('Adobe Air' certificates are very good).

  Note that if you only distribute your HTML5 extension through modules Adobe / Adobe Exchange, then there is no need to use a paid certificate. If you distribute your extension elsewhere, then you should do the same thing as you did with the extensions of the AIR.

  Best regards

  Fraser

• Creating BBID token for the signature of invalid query results

  EDIT: WARNING: I may sound like a bitter ars * hole for some.  I'm not.  I'm grumpy and sarcastic, but generally happy and have good intentions.  If that is not met in this post, please accept my apologies.

  ----------

  I just installed Momentics IDE under Windows XP x 64 and I'm going to run a project (making the first application of waterfalls * beep *-EDIT: who says cr * p lol, because really, it * is * a cr * p app lol), and he wants a token of debugging. I find in the preferences and enter a password, and it jumps to the top of the web page to connect with my BBID (for BlackBerry Jam Zone). So I do that and it spits out:

  ERROR: Invalid query. Missing required parameters.

  I don't think it's a browser problem, but who knows. The page is apparently planned the use of IE and I went and made sure that cookies are enabled, but no change.  I couldn't think of something else IE would do is stupid.  So assuming it was something stupid (EDIT: lol), I tried the URL on the page in Chrome properties.  Same result.  Still think this isn't a browser problem (EDIT: lol) I tried Firefox (I have all these browsers, because I am trying to find one that does not suck.  It turns out that all suck somehow (EDIT: lol, first world problems huh? lol)).  Same result.

  Should I wait for the servers to stop playing with them?  EDIT: lol I wait for BlackBerry update the IDE?  EDIT: lol has anyone else had this problem?  Apparently not because my research give nothing... (EDIT: try to point out that I have * fact * research before posting)

  Creating thus a vendor account is released.  At the point where I have to present Government ID BlackBerry in order to run Hello world on a phone that I own, I check.  I want just a few keys to be able to run things on my phone.  BBOS was relatively trivial.  I applied for keys, key got sent to me, actually.  Isn't this possible in BB10?

  ...

  If it turns out that it is.  I finally realized that I could "bb10 code signing" in google and see if I could get the keys from outside the IDE.  Duh.  I didn't when I was half asleep.  Led me to https://www.blackberry.com/SignedKeys/codesigning.html where I could connect with my BBID without errors.  I was able to get bbidtoken.csk and it sat in my downloads directory.  I went through the record of signature and the Configuration Wizard in the IDE preferences and arrived to the party requesting the token BBID password.  I clicked get Token and instead of the page web to appear, he did what he needed to do and carried on.  I saved the token and certificate and noticed that the token in the zip file was different from the one I downloaded.  Don't know what is happening here.  Note that the browser was still open and connected to the area of Jam BB while I did this.  Not sure if this is important or not.  I thought that maybe a cookie was the key but the browser is chrome plated and the IDE using IE.

  So problem solved, sort of.  You don't have a supplier account to run applications on your phone.  Do you if you want spam BlackBerry World with bubble bursting games well.  Hope this helps someone in the future and I hope that BlackBerry corrects this bug, which probably didn't happen to me, because everyone has Windows 7, or something.  So for the record:

  Windows XP x 64 Version 5.2 (Build 3790.srv03_sp2_gdr.130306 - 1435) SP2

  Momentics IDE for BlackBerry Version: 2.0 Build id: v201310251603

  BlackBerry SDK native 10.2 installed

  Internet Explorer 8.0.6001.18702

  Google Chrome 33.0.1750.154 m

• For the profile of Smartphones blackBerry ring tones

  All new to the BlackBerry famiy and had my new Pearl for about a week, the only complaint I have for the moment is when the phone is set to vibrate + ring, it vibrates to the time set then rings rather than doing both at the same time... is anyway to get both at the same time or not?

  Mark

  There is a 3rd party software that corrects this bug called Vibandring.

  http://www.MobiHand.com/product.asp?ID=19664&n=VibAndRing

• New Satellite C55-A-1UE trying to set up for the 1st time

  Hello

  Just got my new Toshiba Satellite C55-A-1UE turned on for the 1st time and went through the entire internet upward, account set up etc. Then it says loading software and please wait do not turn off.

  I've been sitting for more than 30 minutes of waiting and all I have is a circle go around round n as its load. Seems an awful lot of time for it to set up - someone can advise?

  > I've been sitting for more than 30 minutes of waiting and all I have is a circle go around round n as its load. Seems an awful lot of time for it to set up - someone can advise?

  Well, during the first configuration, the image of Toshiba must be configured and all necessary updates must be downloaded and installed. It takes time.

  However, it would be possible that the system would not answer more and in this case, you simply turn off the laptop and it should restart again.

  Usually the system would begin the configuration of the point of interruption

• OfficeJet 4630: Setting up for the second computer

  On behalf of my father who has a Macbook Pro and a 8.1 Asus which are both able to print: I tried the scanner now and then that the Mac has a utility program that I used for the Mac can receive scans the Asus doesn't seem to have any HP software. I suspect my father set up the HP with the Mac and left intact Asus. What do I need for the Asus can receive scans? Y at - it other software I should install on the the Asus.

  Thank you

  VFN

  Hi @VFN

  Run, and then follow Installation Wizard HP printer below, it will get and run the software for your printer latess:

  http://h20180.www2.HP.com/apps/NAV?h_pagetype=s-926&h_lang=en&h_client=s-h-E016-1&h_keyword=DG-PIW

  Please let me know if you're having trouble.

  Shlomi

• Authorization for the notification icon in BlackBerry Hub

  Hey people,

  is there a way for us to ask for permission to add a notification icon in BlackBerry Hub?

  We do not want to publish applications for the BlackBerry World storefront but only for use in internal business applications.

  I asked for a response in support of the supplier portal and he directed me to the forum of Support here.

  Thank you!

  Kind regards

  Daniel

  Documentation says to email,

  [email protected]

  https://developer.BlackBerry.com/native/reference/core/com.QNX.doc.UDs.lib_ref/topic/manual/overview...

• Application of blackBerry Smartphones of features for the next version of Blackberry... (roadmap)?

  Greetings

  I recently had the pleasure to develop on the Blackberry 9700 for my work, and it was a happy experience. I have several questions about the Blacberry and its future directions:

  Y there or there is already (or planned) for the blackberry with sensor functionality more?

  Y there or there is already (or planned) to have blackberry specialized for medical diagnosis?

  (I know this is a crazy idea, but with portable scanners and identifiers of available portable bacteria, it could be an interesting feature)...

  More specifically, it would be interesting that some of the features of Blacberry could include one or more of the following sensors:

  -Altimeter

  -Magnetometer

  -Thermometer

  -Accelerometer

  -Barometer

  -Hygrometer
  -Photometer
  -Rangefinder / Distance finder
  -Light meter
  -Sound level meter
  -Dosimeter (radiation)
  -MRI mobile (technology is not ready yet however)

  I know that my ideas may seem crazy, but I think that these types of portable devices will exist eventually on the market one day, and I just wanted to give people to Blackberry a few ideas!

  PS: I have a technical training in electronics, with some years of experience, so my idea is probably less crazy than you think!

  I hope that we will one day these types of devices!

  Carl Eric Codere

  Don't count on anyone of the RIM that goes just to your suggestions here, since this is a user community support forum.

  You can send your suggestions to [email protected]

• So much for the Palm Centro. BlackBerry to add ads to TV +.

  "Users of blackBerry smartphones will gain the convenience of being able to discover what are the [TV] shows.

  Press release-RIM http://press.rim.com/release.jsp?id=1794

  Sorry for the lack of context. I like the Palm OS, and the main reason I guard autour is offline, full text searchable ads TV using my favorite 3rd party app.

  Given that the Centro is primarily intended for users of the non-professionnelle, my funtime comes with my Palm and not my company BlackBerry. To watch TV, I often start my Palm just to see if something interests me before you even turn on the TV. Otherwise, my life is pretty boring with young children, usually watching kiddie shows.

  Message relates to: Palm m105

• [ADF, JDev12.1.3] (How to set values for the attributes 1) to create a file and 2) committing to the database?

  Hallo,

  in my tables and forms (created from VO istances) there are some areas for which, insert and update, I calculate and set the value programmatically when a record is created or updated.

  In some cases, I put the necessary values using the 'CreateWithParams' in the workflow diagram...

  

  In some other ones, I associate an action, a bean, a created button drag-and - drop operation 'CreateWithParams' of the istance VO...

    public String cwpButton_action() {
      BindingContainer bindings = getBindings();
      OperationBinding operationBinding = bindings.getOperationBinding("CreateWithParams");
      // here I calculate and set the needed params
      // ...
      Object result = operationBinding.execute();
      if (!operationBinding.getErrors().isEmpty()) {
        return null;
      }
      return null;
    }
  

  And is ok if I can calculate the values for the attributes before a new record is created.

  But the approach that I have used to define the attributes (for new and updated records) whose value should be caluclated after the user has filled in the fields, before committing to the database?

  Thank you

  Federico

  Federico,

  Let me first tell you that our code is activity masking errors (the cache instead of working on them).

  1. If (! operationBinding.getErrors () .isEmpty ()) {}
  2. Returns a null value.
  3. }
  4. Returns a null value.

  This means that you do not check the errors at all. You must at least print a log with the error message, you receive, if you get one!

  To solve your problem, you override the method prepareForDML() of the entity or entities in question. You can calculate and set the necessary attributes until they get engaged in the doDML(). Do not use doDML() because it is too late in the life cycle.

  Timo

• The tolerance setting works for the "Convert anchor point tool"? Are there other ways?

  Hello
  I wonder if the setting "tolerance"in the preferences only works for the arrow tools?» I put it to 8 pixels and it seems OK for these tools, but when I use the tool 'Convert Anchor' point it is incredible difficult to hit a point for me. It seems that I have to hit a point exactly one pixel, which is hard with a screen high resolution.
  My PC keeps beeping all the time and I'm getting crazy on this subject...
  It seems that the framework of tolerance doesn't work here, I'm right? There are other parameters that could help me to work with this tool?

  Sorry if this is the kind of a beginner question, I have much experience with PS and LR, but not so much with Illustrator (and I couldn't find anything useful in the internet).

  Thank you
  Raschko

  I agree, it is sometimes difficult to click on the sweet spot. Here are 3 proposals:

  1. Pay attention to the cursor icon. This will change when you are on a point anchor or direction.
  2. Try to turn on 'bearings commented. They can be a nuisance, but they are sometimes useful.
  3. Use the button "convert" on the Options bar. They may take a little longer but they are full-proof, moreover, you can convert or remove several selected points simultaneously using this method.