Set up new network iSCSI for VCenter

Similar Questions

• Cisco ACS SE "set ip" error: could not set up new NETWORK card configuration.

  Hello

  I get the error "error: could not set up new NETWORK card configuration." When I try to set the IP ACS SE.

  When I called into the device image and tried to do an initial installation, the IP to not hold after the restart and went back to the default value.

  I went by NetPro and apparently it is a common problem. One person it is solved re-imaging unit, but who has not worked for me.

  Someone there with a solid solution? I use NIC 1 FYI.

  EDD.

  Ed,

  Please make sure that if ACS is associated with active before setting Ethernet connection

  or change the IP address of your ACS system engineer.

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_solution_engine/4.0/installation/guide/appliance/admap.html#wp1109621

  Kind regards

  ~ JG

• Whenever I plug my Android phone, Windows sets a new network

  I have a recent development between my Android phone and Windows 7. Whenever I plug my Android phone to my computer to download pictures of her, (I didn't put it up as a hotspot, blue tooth is off), Windows detects it as a new network and the pop up window appears asking me to identify if it is a home network, work network. My concern is that it is now 'Network 15', and next time it will be "16", etc. of the network.

  Right now, it doesn't seem to be the cause of the problems, but if this continues, I will be 75 network, etc. 76 network. Is that eventually created a problem, and if so, does anyone know how to solve it if Windows can't detect my phone as a new network whenever I connect it?

  Also, I've been digging into network connections, trying to find and delete all of these additional network connections that are created, and I can not locate them. I can't see them not listed anywhere under "network and sharing Center." Any suggestions on where they live?

  Windows 7 Home Premium 64 - bit SP1

  ASUS P8Z68VPro

  Intel Core i7 3770 k

  8 gb Crucial Ballistix DDR3

  Crucial 128 GB SSD M4

  Hello

  I imagine the inconvenience that you are experiencing. I will certainly help you in this matter.

  This could be due to network settings.

  You can try the methods below and check if it helps.

  Method 1: Troubleshooting run Internet Connection.

  1. Open the of Internet connections Troubleshooter by clicking the Start button, then Control Panel.
  2. (b) in the search box, type Troubleshootingand then click Troubleshooting.
  3. Click view all, and then click on the resolution of the problems of Internet connection.
  4. Follow it on the instructions on the screen.

  If the problem persists, follow method 2.

  Method 2: Turn off network discovery

  Enable or disable network discovery

  Also see the Microsoft Help article:

  Wireless and wired network problems

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

  Thank you

• Failed to set the new CSS rule for the background image

  Hello

  Maybe I've finally lost my mind... I myself find it impossible to add a background image to the header of my project portion.  I select the "header" in the property Panel section, click on "add a new CSS rule.  Curiously, DW does not in the name of the selector for me, which is probably an indication that something is wrong, but I don't know what.  I went through the steps of filling in the name of the switch by hand, choose the .jpg file and setting is like a background image, but he never takes.

  There has got to be something simple that experienced users of DW can explain.  Go ahead, experts, you out there?

  Thank you...

  When things go south, it is almost always caused by a mistake of small coding somewhere.

  Unbalanced tags are the usual suspects.

  Run validation and fix the errors reported.

  Nancy O.

• PowerCLI Script to migrate virtual machines with the same network Source for the new vCenter Server.

  Hi all

  I checked a few posts on the migration to the new vCenter Server virtual machine. But I'm not very good with Powercli and need some help here.

  We have a new vCenter server where we migrate virtual machines from one source vCenter server. Here are two things that I don't know how to connect together to make sure that bwfore we turn on the virtual machine to the virtual machine is connected to its source network.

  Part 1 - this script works well but do not get any network on the vCenter destination.

  cluster = Get-Cluster "clusterA.

  $inventory = get-Cluster $cluster | Get - VM | Add-Member - MemberType ScriptProperty-name "VMXPath" - value {$this.extensiondata.config.files.vmpathname}-Passthru-Force | Select-Object Name ResourcePool, folder, VMXPath |

  $inventory | Export-Csv c:\file.csv

  $inventory = import-csv c:\file.csv

  $cluster = get-group 'b '.

  {foreach ($vm to $inventory)

  $ESXHost = get-Cluster $cluster | Get-VMHost | Select - 1 first

  New-VM - VMFilePath $vm. VMXPath - VMHost $ESXHost - location $vm. Folder - ResourcePool (Get-Cluster $cluster |) Get-ResourcePool $vm. ResourcePool)

  }

  Part 2 - I want to preserve the Portgroup macaddress and the Ip of the virtual computers and connect them to the new vCenter. How can I do this with the script below. Or how can I combine them together?

  $vm_list = get-Cluster-name "clustera | Get - VM test * | Name sort

  $information = {foreach ($vm to $vm_list)

  $network_adapter_information = get-NetworkAdapter - VM $vm

  $vm | Select Name,PowerState,ResourcePool,@{N="Path; E=       {$_. ExtensionData.Summary.Config.VmPathName}},@{N="NetworkAdapter '; E = {[string]: join (":", ($network_adapter_information |))} %{$_. {{(Nom + "," + _.NetworkName $}))}}, @{N = "MacAddress"; E = {[string]: join (",", ($network_adapter_information | % {$_.}))} MacAddress}))}}

  }

  Step 2

  # Unsubscribe virtual machines

  Remove-VM - VM $vm_list-RunAsync Verbose - confirm: $false

  Step 3

  $cluster = get-group 'b '.

  {foreach ($vm to $inventory)

  $ESXHost = get-Cluster $cluster | Get-VMHost | Select - 1 first

  New-VM - VMFilePath $vm. VMXPath - VMHost $ESXHost - location $vm. Folder - ResourcePool (Get-Cluster $cluster |) Get-ResourcePool $vm. ResourcePool)

  }

  # Save virtual machines

  foreach ($info in $information)

  {

  $vmxpath = $info. Path

  $resource_pool = $info. ResourcePool.Name

  New-VM - ResourcePool (ResourcePool-Get-name $resource_pool) VMFilePath - $vmxpath - RunAsync-Verbose | Out-Null

  }

  Step 4

  # Put the network cards

  foreach ($info in $inventory)

  {

  foreach ($network_information in ($info.NetworkAdapter - split ":"))))

  {

  $virtual_machine = $info | %{$_. Name}

  $network_adapter = ($network_information-split ",") [0]

  $network_vlan = ($network_information-split ",") [1]

  Get-VM-name $virtual_machine | Get-NetworkAdapter-name $network_adapter | Together-NetworkAdapter - NetworkName $network_vlan-Verbose-RunAsync-confirm: $false | Out-Null

  }

  }

  # Start the virtual machines

  foreach ($vm to $vm_list)

  {

  Start-VM - VM $vm. Name-RunAsync Verbose - confirm: $false | Out-Null}

  }

  Thanks in advance for any help.

  Hi all

  I made some changes to the script and it worked for me. We have added a host on the destination with all exchanges and storage mapped vCenter.

  $vm_list = get-Cluster-name 'Site B - b | Get - VM | Name sort

  $information = {foreach ($vm to $vm_list)

  $network_adapter_information = get-NetworkAdapter - VM $vm

  $vm | Select Name,PowerState,ResourcePool,@{N="Path; E=       {$_. ExtensionData.Summary.Config.VmPathName}},@{N="NetworkAdapter '; E = {[string]: join (":", ($network_adapter_information |))} %{$_. {{(Nom + "," + _.NetworkName $}))}}, @{N = "MacAddress"; E = {[string]: join (",", ($network_adapter_information | % {$_.}))} MacAddress}))}}

  }

  # Unsubscribe virtual machines

  Remove-VM - VM $vm_list-Verbose - confirm: $false

  $cluster = get-Cluster "Site A - clustera.

  {foreach ($vm to $information)

  $ESXHost = get-Cluster $cluster | Get-VMHost | Select - 1 first

  New-VM - VMFilePath $vm.path - VMHost $ESXHost - location $vm. Folder - ResourcePool (Get-Cluster $cluster |) Get-ResourcePool $vm. ResourcePool)

  }

  # Save virtual machines

  foreach ($info in $information)

  {

  $vmxpath = $info. Path

  $resource_pool = $info. ResourcePool

  New-VM - ResourcePool (ResourcePool-Get-name "test1") VMFilePath - $vmxpath - RunAsync-Verbose | Out-Null

  }

  # Put the network cards

  .

  foreach ($info in $information)

  {

  foreach ($network_information in ($info.NetworkAdapter - split ":"))))

  {

  $virtual_machine = $info | %{$_. Name}

  $network_adapter = ($network_information-split ",") [0]

  $network_vlan = ($network_information-split ",") [1]

  Get-VM-name $virtual_machine | Get-NetworkAdapter-name $network_adapter | Together-NetworkAdapter - NetworkName $network_vlan-Verbose - confirm: $false | Out-Null

  }

  }

  # Start the virtual machines

  foreach ($vm to $vm_list)

  {

  Start-VM - VM $vm. Name-RunAsync Verbose - confirm: $false | Out-Null

  }

  Hope this will help many of you.

• OsCustomizationSpec and OSCustomizationNicMapping they are a good way to set up the new virtual machine for the model

  I build a script to generate auto magicly VM when I have import information from a csv file. I have the latest PowerCli, I am trying to build servers r2 Sever 2012 model.  I tried several OsCustomizationSpec (OCS) of in the hope of getting something to work, but I had no luck so far.  In VCenter, it shows that it applies the OCS, but is not apear to have an impact on the server.  I have disabled UAC since the last time that I tried it so maybe that will make a difference.  I am under ESXi 5.1 update 2, just to try to give all the necessary information.  Ideally, I'd like Sysprep, the value of intellectual property, change the computer name and join the server to the domain.  That's all! lol I have the book "VMware vSphere PowerCLI Reffernece, automating vSphere Administration, I walked through step by step.  The new version of PowerCli seems not have the x 86 limitation as earlier versions of PowerCli.  I tried so many different things, I'm not sure what to put in place as a starting point.

  # Save the object credentials with permission to join the domain.
  $DomainCredentials = get-Credential "domain\testername."
  # Clone our Spec by adding the domain information.
  $Spec = get-OSCustomizationSpec "Windows Server 2012 R2"
  $Spec += get-OSCustomizationNicMapping - Spec $Spec
  #$Spec | Select *.

  # Get our VM
  # Change network settings
  Get - VM BigServername | Get-NetworkAdapter | Together-NetworkAdapter - NetworkName nic - 172.16.25 - VLAN225 - connected: $true '
  -Confirm: $false | out-null
  # Close the comments to make change.
  Stop-VMGuest - VM $VM - confirm: $false | out-null
  # Wait while feedback stops
  While ($vm. ExtensionData.Runtime.PowerState - not "poweredOff")
  {
  Start-Sleep - seconds 1
  $vm. ExtensionData.UpdateViewData ('Runtime.PowerState')
  }
  # Apply Spec customization to apply the new network settings
  Get - VM "BigServername" |
  Set-VM - OSCustomizationSpec "R2 Windows Server 2012" - confirm: $false |
  Start-VM

  I can rebuild the model, or something else, we must do this work.

  OR - is simply not the best way to configure the VM?  If not, what Sysprep?

  Good news, but first, I would really like to know where the log files are on which server to the OsCustomization process.

  I decided to reverse engineer and create a CSOS within vCeneter and once I got to work, I kept creating new CSO via PowerCli until I could get that to work, create a new virtual machine.  Once I got this to work, I have tryied to apply on a cloned vm, with no parameters. I got it works too.  I tried to go back to my original image, but I couldn't get this to work.  Something's wrong with this picture.  He wrath that the problem was related to the permissions on the local client.

  New OSCustomizationSpec - OrgName company OSType - Windows - ChangeSid-Server "vcenter.dom.com" - name PowerCliOnly4 - persistent administrator-Type FullName - AdminPassword! password123 - zone "Eastern (USA and Canada)" AutoLogonCount - 3 - domain dom dadmin - DomainUsername - DomainPassword! password123 NamingScheme - vm-Description "PowerCli Use only" - confirm: $false

  Get-OSCustomizationNicMapping - OSCustomizationSpec PowerCliOnly4 | Game-OSCustomizationNicMapping - Position 1 - IpMode UseStaticIP - IpAddress 10.10.10.98 - 255.255.255.0 - DefaultGateway 10.10.10.1 Dns subnet - mask "10.10.10.10","10.10.10.11" "-confirm: $false

  This seems to be very picky.  Because the area is one of the parameters, you cannot put it in the DomainUsername, no dom\dadmin. The part that I really want to know how to get more, is what happens if your vm has a different local administrator as the administrator account.  It turns out that FullName - is not the account that it to connect locally with tires. When I created the vCenter Medtronic Chondroitin, I put 'me' in the name and information of the Organization and that's what was settled in the FullName property:

  Name: PowerCliOnlyM
  Type: persistent
  ServerId: /VIServer = dom\[email protected]: 443.
  Server: vcenter.dom.com
  LastUpdate: 24/09/2014 13:33:19
  DomainAdminUsername: dadmin NO dom/dadmin here!
  DomainUsername: dadmin
  Description: PowerCli use only, done manually in vCenter.
  AutoLogonCount: 3
  ChangeSid: true
  DeleteAccounts: false
  DnsServer:
  DnsSuffix:
  Domain: vsi
  Full name: me
  GuiRunOnce:
  NamingPrefix:
  NamingScheme: Vm
  OrgName: CompanyTU
  OSType: Windows
  ProductKey:
  Time zone: (USA and Canada)
  Working Group:
  LicenseMode: NotSpecified
  LicenseMaxConnections:
  EncryptionKey: {-126, 3, 48, 108...}
  ExtensionData: VMware.Vim.CustomizationSpecItem
  ID: PowerCliOnlyM
  UID: /VIServer = vsi\[email protected]: 443/OSCustomizationSpec = PowerCliOnlyM /.
  Client: VMware.VimAutomation.ViCore.Impl.V1.VimClient
  AdminPassword: w
  DomainAdminPassword: N
  DomainPassword: N

  DNS: {10.10.10.10, 10.10.10.11}
  Wins                  :
  SpecId: PowerCliOnlyM
  Spec: PowerCliOnlyM
  SpecType: persistent
  NetworkAdapterMac:
  Position: 1
  IPMode: UseStaticIP
  IP address: 10.10.10.98
  Subnet mask: 255.255.255.0
  DefaultGateway: 10.10.10.1
  AlternateGateway:
  VCApplicationArgument:
  ID: /VIServer = dom\[email protected]: 443/OSCustomizationNicMapping = OSCustomizationNicMappingImpl-PowerCliOnlyM-persistent-1.
  UID: /VIServer = dom\[email protected]: 443/OSCustomizationNicMapping = OSCustomizationNicMappingImpl-PowerCliOnlyM-persistent-1.
  ExtensionData: VMware.Vim.CustomizationAdapterMapping
  Client: VMware.VimAutomation.ViCore.Impl.V1.VimClient
  Version: 1

  I think that it is good to know that the virtual machine reboot 4 or 5 times as it goes through this process.  It breaks is you try and do something for the virtual machine that interrupt the process.  I don't know that I'll think more questions in a second.

  In addition, it cost he had some problems with the put between quotation marks, single or double around the password, but I did not check this again, I just know that once I took them, he began to work.  I ran on other issues while testing as I was using a single IP address, so if I do not disable the test VM, the following would not work because of the conflct network, maybe I shouldn't admit that... lol

• Need help understanding create new network / different subnets for 2nd VM NIC

  I am newer to Vmware and not quite sure that the best way to accomplish the task.  I have a couple of hosts of ESX 4.0 update 1, each host has several physical network connected to the LAN interface cards and iSCSI, vCenter with about 10 mV and each VM has only a single virtual NETWORK adapter for LAN.

  I need to install a new virtual machine with a special application that must be double virtual NICed.  1 NETWORK card must be on the private LAN (e.g. 192.168.10.x) and NIC2 must have a public IP (e.g. 4.2.2.x).  I was going to give NIC2 a private address and NAT through our Cisco PIX firewall, but I am told that causes problems with the application and it must have a public IP address on NIC2.  I now host a card physical NETWORK connected to public physical switch outside the firewall (so I can give him a pub addess).

  I have a physical NETWORK card I booked for this on the Vmware host.  How can I create virtual switch separate from the local LAN, associated with the physical NIC to the virtual switch, assign a range of IP addresses that are associated to the public IP address works (if that's what I do)?  From there on, I think that we would give the real public IP to vNIC2 during the installation of the OS.

  Thanks for any help you can offer.

  Steve

  Welcome to the forums.

  You can add an additional vSwitch and assign the 2nd physical NIC as the uplink. All the networks is done through the vSphere client configuration tab. In the virtual machine settings just add an extra vNIC and connetct for the new vSwitch.

  You should have a look through the information on http://www.vmware.com/technical-resources/virtual-networking/

• Impossible to install the new printer, Pixma MG5320 without error "setting up the network printer down.

  I have a new all-in-one Canon Pixma MG5320. I am unable to get the installer to finish with on "setting up the network printer down." Despite numerous attempts to:

  (1) download the driver on the internet instead of the installation CD.

  2) with the help of msconfig with selective startup and disabled all programs except Microsoft.

  (3) creates the new administrator account and returned through it all.

  (4) turned off firewall and anti-virus

  The error is compatible and I never have the unit set up under devices and printers. The installation is carried out without any errors marked and you will see the error if you get into the details of setting up and get him. The computer sees the printer when it finds and he answers. The printer and the router, both seem to be communicating correctly. Repair auto and troubleshooting programs I ran as fix - it do not detect errors. The printer works fine through a USB cable. I don't want to continue to use USB because that's why I wanted to go wireless. I'm sure that I forget some of the things I went through in my attempts to get this working. Anyone with any ideas or know what's going on please help.
  Tech of Cannon was very knowledgeable and says he sees this once a month. He believes that some program interferes with the installation process. I do thanks in advance. Nice day.

  Hi Gary,.

  Thanks for posting in the Microsoft Community.

  From the description of the problem, you are not able to install the printer Pixma MG5320. I'll be happy to help you on this question.

  Let us try the steps from the following link:

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information is helpful and let us know if you need help with Windows in the future. We will be happy to help.

• I have recently reinstalled Windows 7 and now I have no option for wireless connection and wireless adapter is not (wireless connections do not show up when I go to set the new connection)

  I recently installed Windows 7 on my PC, and now when I try to set up a new wireless connection, it's impossible. My plug-and-play wireless adapter is not recognized by the computer (but he did more earlier today before installing Windows 7). NETGEAR has the appeal of Microsoft, Microsoft refused to help me for less than 80 bucks, which I can't afford, after buying their product of GD.

  So I was wondering if someone can help me? On my laptop when I go to the networks and together a new network, there is an option to set up a WIRELESS CONNECTION. Can someone help me please? I can't afford $ 80 to tell what drivers to download.

  Thanks and + karma to one who can help me solve this problem.

  Most often when a device does not work, it's because the driver has been corrupted.

  Try reinstalling your.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• 6980 HP wireless printer set up on the new network does not see printer IP URL

  I installed a new wireless router and the INVESTIGATION period on the new router is xxx.xxx.2.1 - access web URL for the printer (connected to router ethernet) is xxx.xxx.1.104 - I can't get the printer to connect to the new network IP address so I can set it up on the network.  I don't have a USB cable to the printer.  Is it possible to reset the printer so that he can put up with the new wireless router?

  Any suggestions would be helpful.

  dleew

  Hello

  I see that the IP address of the router is xxx.xxx.2.1 while the printer IP address if xxx.xxx.1.104 that are not in the same range, the printer should have an IP ending in xxx.xxx.2.xxx, proceed as follows.

  Printer has been set to an IP address manually for router previous? If so, unplug the ethernet cable select network Menu > restore default network settings and reconnect the cable.

• Put network advise for new installation ESXi

  OK please bare with me as I'm still new in the world of "vmware". I am about to install our new server vm infrastructure and hoped some advice and guidance to make sure I understand the first time...

  I have two physical hosts with a new ESXi 4.1 installation. Each host has six physical gigabit NIC that I plan on the use of iSCSI and vmotion. I have also two HP without HP gigabit switches and two. On each host, I intend to configure the following networking:

  vSwitch0
  -the vm network

  -service console

  vswitch1
  -iscsi

  vswitch2

  -vmotion

  Each vswitch will have two physical cards for purposes of Multipathing (one network adapter for each HP switch). HP switches are not stacked as I like to keep independent and to avoid any downtime if a switch fails. Also, the HP without having two network cards and will be attached to each of the HP switches. I have two Setup VLANS on switches HP, the first vlan is part of my regular business network and the other is just for traffic iscis/vmotion.

  Before going any further... does that make sense and its sensitive so far?

  Hello and welcome to the forums.

  I would follow the advice of Edward Haletky in "gears Blue - 6 NIC with VMware ESX physical."

  Good luck!

• a new datastore iSCSI (disk/lun) appears in the inventory. Warehouses of data, but not availble for quick vMotioning...

  Hello

  We have added the new datastore iSCSI (disk/lun)

  This new data store appears in the inventory. Warehouses of data, but not availble for quick vMotioning or the creation of a new virtual machine.

  did we miss a step?

  Ty

  r

  The reason is that the data store is not presented to all hosts in a cluster. When you create the VM in vCenter Server, only warehouses of data visible to the host on which the virtual machine is created are displayed.

  Make sure the presentation on your storage system is correct and rescan your hosts.

  To check the above, take a look at the Configuration-> Storage for guests.

  André

• I have the time to default iPhone 4 iOS 7.1.2 iPhone App not updated since the last 3 days and also checked all the settings for location and also set as new iPhone always present problem... Please try to fix... Thanx

  I have the time to default iPhone 4 iOS 7.1.2 iPhone App not updated since the last 3 days and also checked all the settings for location and also set as new iPhone always present problem... Please try to fix... Thanx

  Turn off your device and turn it on again. If this does not help, sign out of your account and reconnect.

  In addition, you can try to reset your settings.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

• Clock set to date before January 1, 2001. Pop - ups require to accept incoming network connections for: krb5kdc, cups-lpd, MDNSResponder, configd. File system ARDAgent.app has been changed and cannot be repaired by disk utility. Files repaired permissions

  As soon as that connected with the password, the clock is set to date before January 1, 2001. Pop - ups require to accept incoming network connections for: krb5kdc, cups-lpd, MDNSResponder, configd. File system 'System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent' has been changed and cannot be repaired by disk utility. Files permissions were repaired by disk on the install disc utility. How can I stop this?

  Am also using Firefox 43.0.3 browser like Safari.

  'System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent' has been changed and cannot be repaired by disk utility. Files permissions were repaired by disk on the install disc utility. How can I stop this?

  You can ignore the above.

  Utility disk - permission errors, you can ignore

  System preferences/Date & Time/Date & time - is it set to automatically set the date and time?

• I want to just set up a new user account for my beautiful - how should I do this?

  I just want to create a user account for my beautiful... She wants to download i tunes and I don't want that on my account.do I have just tap setting a new user account and go from there?

  Original title: I want to set up a user account for my niece so she can do all he I tunes and things. How is it done? just press this new user account link?

  Hi Arthur,.

  Thanks for posting in the Microsoft Community Forums.

  We're here to help and guide you in the right direction.

  -What version of windows you are using on the computer.

  See the help link and check if that helps.

  Create a user account
  http://Windows.Microsoft.com/en-in/Windows7/create-a-user-account

  For reference:
  User accounts: frequently asked questions
  http://Windows.Microsoft.com/is-is/Windows7/user-accounts-frequently-asked-questions

  It will be useful.
  Let us know if you encounter problems under windows in the future. We will be happy to help you.