setFill (Color) via an object Source or Id = ((Node) Source.getId ())

Similar Questions

• Is it possible to determine if a person has access to my computer via an external source?

  Original title: hacking

  Is it possible to determine if a person has access to my computer via an external source?

  Hello bconn07,

  You must grant permissions via remote access or they would have to introduce a software on your pc without your knowledge for them to access. The software is usually by means of malicious programs and your anti-malware application must pick up that, especially if it's a keylogger or a rootkit. Try to download Malwarebytes antimalware http://malwarebytes.org (download the free version). Install it and then run it. It's good enough to malicious software localization.

  Pirate can introduce a software called keyloggers that send information on the key, you press on your keyboard. This can help them steal passwords etc. However, I do not say that you even have apps keylogging or view on your system, so don't panic. I suggest, however, an application called Keyscrambler personal http:// http://www.qfxsoftware.com/download.htm it works by disguising and precautions that you ever install key press you. By example, if you typed "Bill" keyscrambler journal would be something like 'kl97' thuis makes it very difficult for any keylogging software interpret what keys you actually used.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• I'm trying to follow the video to "Change color" and I don't have a lot of options that uses the presenter.  I'm on a PC.  Can someone walk me by changing the color of an object step by step?

  I'm trying to follow the video to "Change color" and I don't have a lot of options that uses the presenter.  I'm on a PC.  Can someone walk me by changing the color of an object step by step?

  Sorry for the delay. Here is the video

• script to copy the color of the object below

  Hello

  I was wondering if there is a script to copy the fill color of an object below.

  I need to transfer the fill colors of 300 different places for 300 circles, how can I do this quickly?

  Thank you

  Pisistratus

  Update:

  #target illustrator
  function test(){
      function isSquare(item){
          if(item.pathPoints.length > 4){
              return false;
          }
          for(var i=0; i 0){
          var doc = app.activeDocument;
          for(var i=0; i= v[0] && v1[2] <= v[2] && v1[1] <= v[1] && v1[3] >= v[3]){
                              thisInnerPath.fillColor = thisPath.fillColor;
                          }
                      }
                  }
              }
          }
      }
  }
  test();
  

• Change the color of an object

  Very unsuccessfully tried to change the color of an object:

  My simple approach was:

  A BMP format color is black and I want to change in Royal Blue

  var myobject = MyDoc.GetNamedObject (Constants.FO_PgfFmt, "Heading 3")

  MyObject. Color.Name = "blue";

  alert (myobject. Color.Name) / / the color is always black

  I also tried:

  var mycolorprops is myobject. Color.GetProps)

  var i = GetPropIndex (myobject. Color, constant. (Name)

  mycolorprops [i].propVal.ival = Constants.FV_COLOR_ROYALBLUE

  or

  . propVal.sval mycolorprops [i] = 'Royal Blue '.

  If I can solve it for the color, then I'll be able to work with all other orders that involve properties.

  Hi Bob, here's basically how it's done:

  #target framemaker
  
  var doc = app.ActiveDoc;
  
  // Get the required objects.
  var pgfFmt = doc.GetNamedPgfFmt ("Heading1");
  var color = doc.GetNamedColor ("Red");
  
  // Apply the color object to the paragraph format.
  pgfFmt.Color = color;
  
  alert (pgfFmt.Color.Name);
  

  One thing to know: this only changes the color to the paragraph format, but it does not have the equivalent of an update all in the paragraph Designer. You should always pass by and apply the paragraph format updated (or color) to any paragraphs containing the tag with this format.

  Rick

• Change the color of the objects on the film

  For a project I'm working on, I need to be able to change the color of the objects individually. A person moves into the shot, and I wish that some objects in the street to change color as it passes through them. I tried various tools that alter only one color overall shot of another color, but that work here. I'm trying to change the color of individual objects at times keys in the shot.

  I could easily do it with Photoshop, but it takes a long time and I'm sure that Premiere Pro or After Effects to do this much faster.

  Please make suggestions. Thank you.

  The best thing to do would be to use the new masking effect and follow-up in 14 CC and the feature that allows you to apply an effect to an area of masking. The other option would be to duplicate the layer of film in order to have a copy for each element you want to change, roto individual items and then apply color effects to each of the duplicates. If you have no idea what I'm talking about then search Rotobrush and study up. If you have 14 CC then watch this tutorial by my friend Stu Maschwitz. It uses Colorista and Magic Bullet Looks, but the technique would do exactly what you want to do using other color effects.

  Red giant - RGTV

• Action to change the border color changes the color of full object instead

  Whenever I try to do an action in which I change the color of the border, the action is not the way that I save it. Instead to change the border color, as I did in the record, the action changes the color of the whole object (for the color that I have saved) and leaves the border to be black.

  Ok. I think that actions make a difference between the stroke and fill. If you have an action to apply a swatch/color, it will apply this color to everything you have 'face' (look at your tool palette: fill overlaps the race?).

  to get what you want, you may need to make a graphic with the fill color style, as you want and use the action to apply instead of the shade.

• Replace the color of Rusty object

  Hello

  I have a rusty object I need green replaced with red, but without interfering or color.

  I found the color replace did a pretty bad job, creating a solid color layer and masking work, but he "painted" on the rust, the Replace Color tool is pretty good, but there is no way to adjust the color. I used a dark red-brown and it seems enough rose (see attachment).

  It would be ideal if I could exit the replacement as an adjustment layer brush, not sure it's possible...?

  

  

  

  If anyone has any tips or advice it would be greatly appreciated.

  See you soon.

  Create green color with the Magic Wand selection, click Hue/Saturation in the Panel settings then check the colorize and play with hue, Saturation, and brightness sliders. You can change the mask later using the Brush tool, for example. In this way, you will have non-destructive adjustment layer and mask layer you can change at any time. You can use and other adjustments like curves but according to me, is easier with the Hue/Saturation, if you want to visually work without matching the exact values.

  On the screenshot below, I've done exactly in front of the thing by mistake, but the principle remains the same.

  

• Help make a mask of inverted color of an object

  Relatively new to Illustrator.

  I have a model to work, this example is composed of layers. I'd like to invert the colors (black <>- white) to an area defined by an object (form put in evidence, I called a mask) on the layer top - How can I do this? In this way, the white area within the object becomes black and vice versa. Thank you in advance!

  fill your shape 'mask' white.

  Open the transparency Panel. change its blending mode to "Difference".

• Find the color temperature of light source with neutral card

  Hi all;

  I have an adjustable color LED strip that I would get as close as possible to 6700 Kelvin. I hope that I can take pictures of a neutral light card and set the LED color based on temperature/RGB values, I get Lightroom (5.7.1).  Is this possible? If anyone can help with the workflow on how to do it?

  Thank you very much

  I was afraid of that. The numbers only make sense for a radiator of black body like a tungsten light bulb or the Sun, which is a broadband light source. CFLs are generally pretty well made using a series of Phosphors of rare earths that are tuned to human vision and with emissions enough broadband. If you use several sources of monochromatic light as single color LEDs you could not get good numbers. It really depends on the wavelengths of light coming out of the LED. If the color on your camera filters are not the same wavelength of the LED and the sensitivity of three colors of the sensor of the camera is not the same as your eyes, you can get to a situation where your eye perceives neutral colors while the camera sees something completely not neutral. This is from your two raw files. Your illuminated LED Gray card probably looked to the eye, but to the camera, it looked purple. This effect is called Metameric failure and is common if the spectrum of light is very "spicy". This is probably what is happening in your case. You have certainly three narrow band LEDs that you mix. You are really unable to apply the model of the black body of "color temperature" unique to it and then you get strange results you observe. There are index to record high in special colours of the LEDs, which have much wider spectrum light show who have far fewer problems with Metameric failure and that should work for this purpose well.

• Using AS 2.0 how to fade the color of an object from the blue to the red while using a button

  I want to create a model in this model, I want the user to be able to view some object of whatever color they choose, in addition to their choice of a color, I want the color to blend into the next color smoothly.

  do not attach code to objects, and you can use colorF for interpolation of color the first argument using the colors in the arguments of 2nd and 3rd on the length of arguments 4th (in seconds):

  Import mx.transitions.Tween;

  Import mx.transitions.easing. *;

  import flash.geom.ColorTransform;

  var rTween:Tween;

  var gTween:Tween;

  var bTween:Tween;

  var colorObj:Object = {};

  var mc_color:MovieClip;

  var ct:ColorTransform;

  colorF(mc,0xff0000,0xaaffff,1);

  function colorF(mc:MovieClip,startColor:Number,endColor:Number,duration:Number):Void {}

  rTween = new Tween (colorObj, 'red', None.easeNone, (startColor & 0xff0000) > > 16 16,(endColor&0xff0000), dura tion, true);

  gTween = new Tween (colorObj, 'green', None.easeNone, (startColor & 0x00ff00) > > 8 8,(endColor&0x00ff00), dura tion, true);

  bTween = new Tween (colorObj, 'blue', None.easeNone, startColor & 0x0000ff, endColor & 0x0000ff, duration, true);

  mc_color = mc;

  CT = mc.transform.colorTransform;

  rTween.onMotionChanged = colorChangeF;

  }

  function colorChangeF (): Void {}

  CT. RGB = Math.round (colorObj.red)<16 |=""><8 |="">

  mc_color. Transform.ColorTransform = ct;

  }

• Replace the color via color chart

  Hello

  I just need to find objects, texts or anything like that on the page have value of shades of color C = 0 M = 0 Y = 0 K = 100 in "black".

  Below is the code I tried, is not find color 'Black' in the list of swatch.

  
  

  var doc = app.activeDocument;  
  var item = doc.pageItems;  
  var col = doc.swatches.getByName('Black');      
  for(var i=0; i<item.length; i++){  
           if(item[i].fillColor.spot.color.cyan == 0 && item[i].fillColor.spot.color.magenta == 0 && item[i].fillColor.spot.color.yellow == 0 && item[i].fillColor.spot.color.black == 100){  
                  item[i].fillColor.spot.color == col;}     }
  

  
  

  
  

  Not sure why it does not apply. He is doing well if the color is in process mode.

  if(item[i].fillColor.cyan == 0 && item[i].fillColor.magenta == 0 && item[i].fillColor.yellow == 0 && item[i].fillColor.black == 100){  
               item[i].fillColor == col;}  
  

  Thank you

  Kitty

  Hello Kitty,

  Oh, my mistake, I think it happens because run you code when the strokeColor of the element is not a SpotColor, try to check it before, by using an 'If' structure like this:

  for(var i=0; i
  Maybe it's work!
  Kind regards
  Vinicius-
  		   

• vCO-plugins: documentation of type object &amp; source

  Hi guys,.

  I'm new to vCO and were it testing the past few days. Powerful tool, really I have to say.

  However, there are two things I have really miss me and could not find so far:

  -Construction in the API browser is nice to find custom objects provided by the vCO Plugins, but the description of the object often doesn't have any information about the types of objects and parameters (to be precise: all possible parameters and their brands to parameter order, required / optional, parameter object types) and return types. Is there some kind of documentation showing that the available information? I use the browser API the wrong way? It is almost impossible to develop without it.

  -This brings me to my next question: are the provided plugins open source? That would make it possible to extend some of the classes as well as of course it would make possible to verify what really happens behind the scenes. I found that for some plugins, like the vCAC plugin for example, it seems to be a package open source the plugin (for example https://my.vmware.com/group/vmware/details?downloadGroup=VCO_VCAC_PLUGIN_520 & productId = 344 ). However, during the inspection of the package I couldn't find the source files for the libraries open source used by the plugin, not the plugin sources themselves.

  My question is simple: is it possible the GET the plugins source provided?

  Thanks in advance

  Robert

  Right, I remembered supply open the powershell plugin has been discussed but did not know if this was published as the newer version does not have the included sources.

• Change the color of an object with blur

  I have a group of objects, that I submit for a stock site, but as I was testing things I realized that I couldn't change the color of the blurred items that I had developed the appearance. I had expanded the appearance so that if the object has been to scale upwards or downwards, the blur would stay in proportion. How can I maintain the blur effect (trying to make the highlights and shadows mix their better circles), while being able to change the color, AND resize it while maintaining the proportions? All tips are appreciated!

  I found a solution. If someone runs into it, here's how you can resize non-destructive. You don't need to expand appearance so you can keep changing the color and appearance itself. You'll just have to resize using the tool of the scale instead of drag the handles of the object. When you use the scale tool, you can specify that you want to scale appearances.

• Export of the correct Hex colors via script

  Hi all

  I need to export the fillColor of a paragraph via script style.

  I can get the fillColor of the paragraph style property and can also convert CMYK Hex. However, I realize that color in InDesign values in some color space of the document uses.

  My question is, is there a native API to convert the values of color for a web safe color value? If this is not the case, how can I go on the correspondences between colors?

  In addition, I see that Adobe knows internally to convert it to a good hex color (attached screenshot - note the color property in the export marking side). If I can't use some native API, is there a way to access the text in this pane?

  

  Thank you all in advance!

  Win! It worked!

  Here is the complete solution-

  Assuming that the original color is stored in a variable named color :

  var color = passedInColor; //the original color that we wish to convert.
  
  // Create a temporary color instance that we'll use to extract updated colorValues.
  var scratchColor = workingDoc.colors.add({
                           model: color.model,
                           space: color.space,
                           colorValue: color.colorValue
                      });
  
  // Now, we force adobe's internal color conversion mechanism to trigger by changing the scratchColor's color space.
  scratchColor.space = ColorSpace.RGB;
  var updatedValues = scratchColor.colorValue; // Updated values now has the properly mapped and converted RGB values.
  // You may need to round off the R, G and B values in the updatedValues array.
  // And that's it!
  

  Why am I not surprised that she should be a hacky autour work? * sigh *. It was so so so frustrating to work on this platform! I hope adobe gets his act together!