Setting alerts for newly added or deleted nodes

Similar Questions

• How to set up an alert for cpu use > 90% on a processor Intel Pentium 4 cpu solaris box

  I would like to set up an alert to warn me if the CPU usage is greater than 90%. The problem is there are 4 processors. I can create an alert for each of them to the cpu separately, but I would like to
  usr auto-regroupement CPU and have the fire alert if all 4 processors reach a level of 90%. Is it
  what I would do for the cpu monitoring.  I know that in the past our mysql service would get in a loop and use 90% or more of all processors.
  
  You must use the "CPU usage" metric platform rather every CPU indicator.

  German Laullon
  Web: http://www.laullon.com/
  PhotBlog: http://photoblog.laullon.com/

  On Monday, July 7, 2008 at 17:08, mike monczynski [email protected]> wrote:

  I would like to set up an alert to warn me if the CPU usage is greater than 90%. The problem is there are 4 processors. I can create an alert for each of them to the cpu separately, but I would like to

  usr auto-regroupement CPU and have the fire alert if all 4 processors reach a level of 90%. Is it

  what I would do for the cpu monitoring.  I know that in the past our mysql service would get in a loop and use 90% or more of all processors.

• Still get alerts for deleted host

  I get purple notifications for a handful of guests. I get the impression there is a problem with something I've done about the bbdef.sh. Briefly, I changed the COMPLETE domain name = "TRUE" full domain name = "FALSE" line when I was trying to test something and since evolution back, I keep getting these purple alerts for shortname guests. This is the only simple "testip" hosts, no client installation.

  [2804010] .conn purple Thu Mar 3 15:10:34 THIS 2011 connection OK
  PING nnn.nnn.nn.nn (nnn.nnn.nn.nn) 56 (84) bytes of data.
  64 bytes from nnn.nnn.nn.nn: icmp_seq = 1 ttl = 250 time = 1.56 ms

  There are some files that I need to clear out somewhere or something? I tried one stop complete/start the BB server without success.

  Here's the related associated line starting from my bb-hosts;

  short nnn.nnn.nn.NN - hostname.longfqdn.com # testip

  Jeremiah,

  Remove the associates of the log files (.conn) of $BBVAR/logs and reports purple should stop.

  -Paul

• On a 3.0.3 HYPERIC SERVER will attempt to set up an alert for hq agent and controlling -?

  On a 3.0.3 HYPERIC SERVER Im trying to put in place an alert for hq agent and controls the action to restart if I get an alert -?
  I open the page web hyperic and select the hyperic Server customer. I then click on alert
  and create an alert if the availability of the agent hq changes.  When I try and change the CONTROL ACTION with the help of change. It does not list the agent in the resource type.
  So I can not change the name of resource either, so I can't enter restart since I can get the hyperic
  customer as long as the resource. Thi snot is available. What I am doing wrong. I try to test the control
  action in EE and create just a simple test to restart the clien...

  Well, you can NAVIGATE to the AGENT to AC and control A QUESTION
  command?

  If you cannot issue a regular command via the command tab, then you
  won't be able to run a control to an alert action
  definition.

  In this case, the agent does not control, is not
  something you can do.  As I said, you can try the program control
  orders to different resources (other than the agent)

  -Jon

  On 2 May 2007, at 16:08, mike monczynski says:

  > I do not understand, can't, I have a client command to shutdown or reboot with the
  > The alert CONTROL.
  > Control has start stop restart but I can't get the hyperic
  > customer as the resource. I'm using the EA version.  I know that I can
  > maually shut down and boot a client. isn't this control will do the
  > same thing? Since he in the hyperic customer alert?  I have on
  > ocassion corrected problem by restarting the hyperic customer.
  >

• How to set up for 2 node RAC parallelism init.ora parameters

  What are the init.ora parameters required to activate RAC parallelism for a cluster with two nodes (Oracle9i and Oracle11g).
  
  1 * select statistics, the value of v$ pq_sysstat
  
  VALUE STATISTICS
  ------------------------------ ----------
  2 busy servers
  Servers Idle 19
  Servers Highwater 4
  Server 80 sessions
  Servers started 1
  Stop 0 servers
  Cleaned servers 0
  Underway 19 queries
  Insider (IPQ) queries 0
  DML initiated+ 0
  DML Insider (IPQ) 0
  
  VALUE STATISTICS
  ------------------------------ ----------
  DDL launched 0
  DDL Insider (IPQ) 0
  DFO 19 trees
  Sessions active 1
  Local sent messages 514343
  Original sent messages 126
  Local messages Recv'd 414094
  Msgs Recv Distr.'d 230
  
  19 selected lines.
  
  
  The statistics above "DML statistical = 0.
  
  Please advise on the required parameters. Thank you

  Second test:
  No specific configuration is necessary.

  --
  Sybrand Bakker
  Senior Oracle DBA

• Get error when adding or deleting instance of a table row

  I'm absolutely brand new to LiveCycle ES2 (we were using Adobe Pro 7 until a week ago). I've been playing with some of our forms in an attempt to see what LiveCycle can do to update these in a format better.

  I have a table with a header line, a line of body and a footer line. The line of body must be reproducible. I used the custom object "subform Instance: insert delete move controls" to add the most and the sign less. I put the Action to repeat or delete the instance of this single line.

  The entire table is encapsulated in a subform that sank. The line that repeats is set to "repeat the line for each data item ' with Min County set to 1 and no Max count. The entire document is also wrapped in a subform, the value passed.

  When I go to preview and click the Add button of the Instance, I get this error:

  «WARNING: JavaScript Window - element insertion.»

  You have reached the maximum number of items allowed. »

  If I try to remove it an Instance button, I get a similar error on the minimum number of items allowed.

  BUT (and here the confusion belongs) the buttons work! The line is added or deleted, it gives me just the error first. What could happen? I tried affecting count Max 20 to see if giving it a number max can help, but I still get the error.

  I have it all done by using Design view, because I don't know anything about JavaScript, but I can post the generated code, if it helps.

  Hmm ok, the script of Action Builder is very overloaded, do not know what is causing the error.

  My suggestion:

  1. remove all the actions that you created with the constructor of the action

  2. for the button Add use this JavaScript in the click event

  Table._TableRow.addInstance (1);

  3. to remove button this JavaScript (will remove always the last instance of the line)

  If (Table._TableRow.count > 1) {}

  Table._TableRow.removeInstance (Table._TableRow.count - 1);

  }

• Alert for a stopwatch

  Hello

  I have a form of Acro for the day with a stop watch field and a field of time/hours.

  When the time/hours text box is updated by the user, for example '00:00:10:00', the stopwatch starts.

  I'd like an alert to show 2 minutes before the end of the duration of the stay.

  In the field of stop watch, the following calculation script has been added:

  var g = this.getField ("StopWatchDisp");

  var t = this.getField("Action_Time").value;

  If (g.value == t) {}

  App.Alert ("finishing the point in two minutes");

  }

  The script does not work, can someone please tell you an alert for the stopwatch?

  Thanks in advance

  JO

  Form the script provided, you are aware that the displayed string is a single string of formatting and you'll have this format for your comparison.  Your clock displays the time in the form 'HH:MM:ss:tt' or hours, minutes, seconds and hundredths of a second (milliseconds divided by 10). If your time of the event is only the hours and Minutes, then you must add the seconds and hundredths of a second for the comparison of the channels or remove the seconds and hundredths of a second off the display shows stop value.

  You don't want to compare the duration of the order of the day, but point of the order of the day length less than 2 minutes. You must separate the minutes of the length of the agenda point to obtain the value of minutes for the order of the day and then build the string comparison necessary. You can adjust the comparison to only hours, minutes and seconds.

  If your time on the order of the day has a format "mm; SS", then you can use the 'split' method to extract values of the minutes and the seconds value.

  (function () {}

  date 2 minutes waring and alert when the set time is matched
  get the value of stirng for the duration of the day
  var sAgendaTime = this.getField("Action_Time").value;
  run only if there is a value for the event
  If (sAgendaTime! = ") {}
  convert an array with the elements for the minutes and seconds with the set time duration of the point of the day
  var aAgendaTime = sAgendaTime.split(":");
  var sAgendaWarning = util.printf ("% 02d: % 02d: % 02d", 0, aAgendaTime [0] - 2, aAgendaTime [1]);
  compare to the display shows stop value
  If (Event.Value.substr (0.8) == sAgendaWarning) app.alert ('2 min WARNING');
  }
  return;
  }) ();

• How to fill a column with numbers and maintain when adding or deleting lines?

  So far, I've discovered two ways to fill a column with the number:

  1. Enter '1' in a single cell, '2' in the one below, select both, and then use the yellow dot to drag down - it will do the rest.

  2 create a formula such as 'A2 + 1' and drag also.

  However, in both cases it will work if I manually this continues to do for each newly added line at the bottom. Now, that alone would not be that big of a problem if it wasn't for the fact that I'm working with a table where the lines can be added among other rows in the future.

  Having said that, could someone please tell me how to create a column with a number that will increase automatically? I mean - if I add a new line between line 56 and 57, I want the new line to have a '57"in it, and the" old 57 "would now be"58"and so on." " I don't want to drag the whole column, which can be hundreds if not more than a thousand lines.

  Try to put this in the cells in the column:

  = ROW()

  In the formula, you can add or subtract a number if necessary to get the starting number that you need.

  SG

• How can I activate the alert for when I leave an encrypted page?

  I disabled inadvertently alert for when I leave an encrypted page, and want to turn it on, I know when I leave a page that is well attached. He used to be an option to do this, but I'm not. Help someone?

  The settings for warning messages have been removed from the UI (Bug 513166).

  You must change preferences related security.warn_* directly on the topic: config page.
  
  Filter: security.warn_leaving_secure

  To open the topic: config page, type Subject: config in the address bar (address) and press the 'Enter' key, as you type the url of a Web site to open a Web site.
  
  If you see a warning then you can confirm that you want to access this page.

  • Use the filter at the top bar of the on: page config to more easily spot a preference
  • Preferences that have changed also show "BOLD" (user set)
  • Preferences can be reset via the context menu by default if they are set of users
  • Preferences can be changed via the context menu: Edit (string or integer) or toggle (Boolean).

• want to remove some programs from my "adding and deleting' on the control panel

  I am wanting to remove some programs from my "adding and deleting' on the control panel.  I have several that I don't know if they are necessary in order to do not want to delete them until I have found.  Example: Microsoft.NET framework 2.0 service pack 2, if I said the same thing with the exception of program 3.0 can remove either one or both or what?  Redistributible MS Visual C ++ 2005 and also have 2008 and 2110.  Platform Installer 3.0, WCF RIA Services V1.0 for visual studio 2010.  I don't even remember downloading all of this stuff, but don't know if it has a meaning to my computer or not.  Y at - it somewhere I can look to find such information?  Don't like silly things like this, but would rather ask that screw up something.  Thank you

  Hello

  • What version of Windows are you using?

  I suggest you to see these steps:

  a. type msinfo32 in the start search box and press on Enter.

  b. a pop-up window, press CTLR + A, then CTLR + C and after that information here.

  c. then we can suggest you what program needs to be uninstalled.

  Response with more information

• Newly added music will not play

  My rocket is pretty well loaded with music (no videos or pictures), and I keep on mixing random almost constantly. One day I realized that he y a few songs I've never heard, I went into my library on the device and checked each album. Some of them belong and when I tried to play them it just showed the title of the song and immediately jumped to the next track without ever playing the songs. I plugged my camera into my PC and deleted the faulty albums.

  After reloading them they would not play again, and any other music newly added won't play either. Please tell me that I don't have to erase my library and reformat this stupid thing.

  Jump across titles as it means that the music is in a format of the "rocket" don't play - like iTunes'.m4a or .aac files. You will have to convert to .mp3.  You can do it with iTunes.

• Vista Windows Mail: sounds of alert for incoming email, but do not see

  Hello, I noticed recently that when our Windows Mail (Vista) plays the alert for incoming e-mails, sometimes we do not find the item of electronic mail.  It is not in the box of reception, junk e-mail or Deleted, or highlighted as spam.  Suggestions, please?

  Thank you.

  Hi DarrenSampson,
  

  It seems that you have the same for another activity on the computer.
  

  See the link below to check if you have assigned the same for more several activities

  Change the sounds of the computer
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-computer-sounds

• I would like to know if Windows Backup and Restore will copy a new set of files and adding to what is there in the previous backup folder

  On my old computer (XP), I used app fast backup protection to back up my files to an external drive, Iomega hosted Media Network Hard (2 TB).  I have a new Dell PC with Windows 7 (64 bit) OS.  With the help of a cable I copied all the files from my XP to Windows 7 computer.  All the files on the external hard drive, copied to a "network".  I am able to view all the folders of the Iomega file, but I can't back up my files to protect fast has not been improved to work w/Win 7.  Quick protect is divided into 6 different discs (photo-U, V-ActiveFolders, W-Music, X-backups, Public-Y, Z-movies), Iomega recommends using backup Windows and restore.  "Before you start this process, I would like to know if Windows Backup and Restore will copy a new set of files and adding to what is there in the folder backup previous Player X or if it will start a"new"backup" folder on drive X.

  Original title: BACKUP AND RESTORE

  New.

  Probably in a completely different format than you are accustomed to and accessible in a different way.

  Although I suppose you could create separate jobs for each of the existing partitions, if you wish.  But I would like to backup these partitions to something else before you start. Heh

• Alerts for text, email, messaging, blackBerry Smartphones voice etc. disappeared

  There is nothing extraordinary, but I no longer get alerts for sms or mms, e-mail and virtually everything that uses alerts.   I checked and double checked the option for each and every settings seem normal.  Normal is that they are set up as they would be working.  Thanks in advance for any help.  Its much appreciated.  Once again thanks...

  Hi and welcome to the Forums!

  Each time a random strange behavior or slow creeps, the first thing to do is a battery pop reboot. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

  Best!

• How to remove newly added line in table advanced

  Hello

  It comes to 12.1.3.

  I have a case of use with advanced table and the "Add Row" button.

  The user can add two lines (empty), field 2 (both part of PK, the two LOVs), then start filling, then realizes he added too many, because the TooManyObjectsException exception is thrown. What would be the 'Nice' way of having the last added row deleted, or some newly added lines to delete if a few lines have been added (before actually trying to commit). I mean how must reference any row that has been added and should be removed - this line do always not PK (PK because not even adjustable due to violation of PK if this makes sense). Is there a fun/easier way to do it? Would be great if someone could share a line or two...

  Thank you

  Anatoliy

  PS

  I have a delete button in a footer with action to fire the event as 'remove' in LICS, I like below, and copy the following code deletes the LAST record in the advanced table, not the one where the cursor is?

  If ("delete".equals (pageContext.getParameter (EVENT_PARAM)))
  {
  String rowRef = pageContext.getParameter (OAWebBeanConstants.EVENT_SOURCE_ROW_REFERENCE);
  Line OARow = (OARow) am.findRowByRef (rowRef);
  Row.Remove ();
  }

  Asmirnov-Oracle wrote:

  Hello

  Yes, I actually try this approach too.

  Have what approach you tried? 1 or 2?

  If you try to follow the second approach, you can try this?

  OAViewObject srcAppvo = (OAViewObject)findViewObject("SrcAppVO1");
  if (srcAppvo != null) {
      RowSetIterator srcAppRowItr =
          srcAppvo.createRowSetIterator("srcAppRowItr");
  
      try {
          Row srcAppRow;
          srcAppRowItr.setRangeStart(0);
          srcAppRowItr.setRangeSize(srcAppvo.getFetchedRowCount());
          int recCnt = srcAppvo.getFetchedRowCount();
          while (srcAppRowItr.hasNext()) {
              srcAppRow =
                      srcAppRowItr.next();
              if (srcAppRow != null) {
                  if (srcAppRow.getAttribute("SelectFlag") != null &&
                      srcAppRow.getAttribute("SelectFlag").toString().equals("Y")) {
                      srcAppRow.remove();
                  }
              }
          }
      } finally {
          srcAppRowItr.closeRowSetIterator();
      }
  }