Setting DTS VM substitute VM?

Similar Questions

• Why is there a setting duplicate when I create a file pfile from spfile on a DB of RAC?

  Hello world

  I ran ORACHK on a 11g (11.2.0.4) database RAC and one of the results shows "check no input parameter in the init.ora (spfile) database duplicate" that I generated a pfile from two of the database file and the following repeated, I saw:

  (BD1)

  amagua2.__streams_pool_size = 536870912

  amagua1.__streams_pool_size = 536870912

  amagua2.__streams_pool_size = 536870912

  amagua1.__streams_pool_size = 536870912

  (BD2)

  * .db_16k_cache_size = 1610612736

  METRO1.db_16k_cache_size = 2147483648

  METRO2.db_16k_cache_size = 2147483648

  I don't know why this happens, in BD2 when I select the setting of $ v that I see the greatest value, which was the last one I assigned to the parameter, so I don't know why the lower value appears in my file pfile.

  in BD1 two lines appear just a copy with the same value.

  I would fix this, any help will be appreciated.

  Thanks in advance.

  Giancarlo Giammaria

  (BD1)

  amagua2.__streams_pool_size = 536870912

  amagua1.__streams_pool_size = 536870912

  amagua2.__streams_pool_size = 536870912

  amagua1.__streams_pool_size = 536870912

  This is because Oracle manages the size of the SGA on its own. Either you MEMORY_TARGET or SGA_TARGET value. Oracle wrote its flow Pool size in the SPFILE so that when the instance is started, it can resume with that component SGA size to its last known value, based on the workload of your application. It is curious to see the two sets, and I have no idea why. But you can always delete the duplicate entries and re-create the SPFILE.

  (BD2)

  * .db_16k_cache_size = 1610612736

  METRO1.db_16k_cache_size = 2147483648

  METRO2.db_16k_cache_size = 2147483648

  In the case above, you have a set specifically for the METRO1 instance. And another parameter specifically for instance METRO2. The higher setting is global for all cases, unless the instance-specific setting would be substitute one world. If you have only two instances, then the global is not much until you add a third instance.

  Now for Oracle RAC... it is normally a good idea to have all the instances with the same cache size setting. It is rare that there is a good reason for instance1 to have a different value than instance2. In addition, if you use TAF and/or want a second instance to support connections over the failover of the first instance, then you want your LMS components sized so as to be able to manage not only the current work load, but the additional workload due to the failure of the instance.

  See you soon,.
  Brian

• Satellite A300: Cannot switch between programs by using the card external sound

  I want to use Notepad for recording and playback for music.
  I bought the TASCAM US - 144 d/a changer / sound card and Steinbergs Cubase LE 4.
  The driver is an ASIO for the d/a TASCAM changer.

  It can be set to a substitute of ASIO called ASIO DirectX Full Duplex Driver.

  It is not possible for me to change between the different programs, for example Windows Media Player 11, Cubase 4 or Audacity.
  The Mediaplayer Te gives the following information:
  "Ist Beim beaches der Datei in Windows Media Player ein problem aufgetreten. Klicken Sie auf "Webhilfe", um weitere zu receive support. »
  It is not possible to switch the output of the TASCAM external sound card.

  Drivers for Cubase, TASCAM and Media Player are the most recent.

  What I've done wrong? Someone at - it an idea?

  Thank you

  Hello

  Please don't be crazy about me but what I do not understand what your problem with Toshiba?
  If you use external third party product, please contact the support of manufacturers and clarify this issue.

  I mean, you'll be really lucky if anyone here uses the same wheels. Before you wait here contact manufacturer. They have the best experience with own products.

  Good luck!

• My new 5 d mkIV take a few seconds to write in the CF card, any other person having this problem

  I missed something in the game to the top... We should not 7 frames on anything other than the Auto... Help, please

  bpstevens wrote:

  Thanks for your reply Diverhank. All the itmes you mentioned below I have disabled according to the manual, I've read. I didn't buy it for speed I have a 5 d MkII 7 for this.

  I think that if you should be able to shoot without having to wait 4 seconds for it to write to the card and you can take your next shot... I am writing to a card Compact Flas - Scan disk Extreme Pro 16 GB 160 MB/s

  The thing that is relative, it is in auto mode to burst up to 7 fps continuous shooting,.

  Thanks again for your help

  Almost, the answer must be that you've stumbled upon one of these warnings shaded blue above, resulting in a setting that is substituted automatically in auto mode. Maybe the RAW dual-pixel, for example.

• Cannot select items Master Page - but only on the last Page of my Document

  I'm working on a magazine layout, which has the page number and month located downstairs outside the corner of each page (pretty standard). Of course, I have this set up on the master spread. So far whenever I have to remove these items on a page of my document I was able to Ctrl + Shift + click and delete. But for some reason any on the last page (on the back) I can't click little matter what I try. I'm still able to select on other pages, and I have confirmed that the layers are not locked. Any ideas why this is only a specific page that gives me any questions?

  (Just to be sure, that I save my document, close and restart the program.) The problem persisted unfortunately.)

  and I confirmed that the layers are not locked.

  Check that the master page element is not set to prevent substitute also. Go to the main spread and select the folio of problem, choose Pages > Master Pages... and make sure that allow point Master overrides on selection is checked. MP articles that are protected do not have the framework dotted on the pages when show the contours of the block is selected.

  And make sure that you have not inadvertently duplicated the folio on the page or master page.

• Hot Sync does not desktop to handheld

  My Palm Zire m150 broken. So I bought a "little used" on EBay. BIG mistake. I used the Palm for the past 5 years with no problems, which is why, my reasoning for the purchase of another.

  In any case, I can't get the information on my desk calendar to synchronize in the handheld. The default values are set to "desktop substitutes Pocket" and nothing.

  Help, please! In addition, the pocket computer restarts after each sync?

  Also, if someone could recommend an upgrade, I can easily move my calendar information, address, etc, I would be very happy. I'll buy something else. All those wasted hours are simply not useful to save a few dollars.

  Thanks in advance for your time and effort.

  Let's review.

  1. can you see all of your data on the desktop?  If so, run the repair tool to verify the alteration.  Tools/Options/tab / check now.  If no anomaly, it's good.

  2. do you Hard Reset of the 'new' device correctly?  I guess you saw "Clear all data, Y/N?" and you then hit the UP button?

  3. I suggest you Hard Reset the new device, check to see if it is working properly (some applications open, just to see if it attempts to reset).  If it works, good.

  4. as you get problems reset on the device, it's time to rename a folder in your Palm on your PC directory.  I am assuming you are using the right to Palm Desktop 4.x version?  Look in the C:\Program Files\Palm\ your HotSync name abbreviated \Backup is where it is located.  Rename the folder /Backup /BackupOLD.   Open Hotsync on your PC Manager icon, select custom and then press the 'Default' button to set all lines back to normal.

  5. now, you can try to Hotsync on the device you just erased with a Hard Reset.  When Palm Desktop application to "Create a new account" or select "Use an existing" use existing and select the user account that includes all of your data.   All of your PIM data should return, but no file problem that can cause the resets.

  I hope we can get this to get this mess straightened out.

  WyreNut

• Confusion about Non-AL32UTF8 and INTERNAL_USE

  Hello;
  
  Yesterday, I made a post in another forum with an example that included "INTERNAL_USE".
  
  Asked very politely by two different Oracle ACE to remove what I did as soon as I saw the request.
  
  I got my idea of this Oracle note:
  
  RCU fails with the character no-AL32UTF8 [ID 1063712.1]
  
  My questions:
  
  1 seeing. me this in a note and have Oracle Support direct me to use it are two different things correct? If yes maybe that 1063712.1 has a warning?
  
  2. is the message never use "INTERNAL_USE" with ALTER DATABASE?
  
  3. is CSALTER the only way to change (migration character set) must take place?
  
  Thanks to everyone for their time.
  
  mseberg

  The problem with INTERNAL_USE is that it is, essentially, made a direct update of the data dictionary without checking if this will cause any corruption of data in the database (which was, at the time of Oracle 7, the way which you did conversion of character sets and there are probably still on some Metalink note somewhere). As such, it is very easy to screw up something.

  Note in particular that you are referencing seems to assume that you have just installed an empty database that you want to use as repository WebCenter. In this very narrow circumstances, it probably does not hurt anything to change the character that is defined in this way (if I wouldn't really consider doing this way, I got a lot rather just re-create the database at that time there) because there is no data in the database. It's awfully dangerous outside this very narrow circumstance.

  On the other hand, if you have an existing database with the data, change the character set in this way is very likely going to corrupt at least some of your data. For example, imagine that you have a Windows-1252 database that stores the character 'a' in a particular line in other tables. In the Windows-1252 character set, which is represented in hexadecimal as 0xE1 (decimal 225). If you change the character set using INTERNAL_USE, Oracle tries to change the way this character is represented, it will start to treat as UTF-8. However, 0xE1 isn't a valid way to represent any character in UTF - 8 (you need two bytes to store this character). So when Oracle reads the data in this table, it will be impossible to convert binary data in any valid character, so (according to the client character set), it will substitute a replacement character (usually an exclamation mark or question mark in reverse). It's really insidious corruption because your basic ASCII data will be fine (since the first 127 characters have the same binary representation in this example), then you will have a bunch of data that are distorted that you might not recognize it immediately but your test data are often basic English. Of course, according to the source and target character sets and their different binary representations, you can also get the corruption where a character seems to have converted to another and other types of corruption.

  If you change the character set correctly by using the character set of scanning and the CSALTER script, on the other hand, Oracle takes various measures to warn you if there will be data loss or to prevent loss of data.

  Justin

• Open the Document as a COPY on MAC

  Hello world!

  A very simple question about the different behavior of InDesign on Windows and Mac. On Mac whenever a document is open, it always opens a copy of the document regardless of the selection of the options of the dialog open ORIGINAL or NORMAL. Instead, Windows runs the process as requested.

  In fact, I try to open the InDesign document using the script

  App.Open (file, true, OpenOptions.OPEN_ORIGINAL)

  
  

  call. But on Mac, it works as expected.

  Only, I want to know if this is the default behavior on MAC or there is some setting preference to substitute it.

  Thanks in advance.

  Files of older versions still open 'copy' - If you look in the window title, it will say "Yourfilename.indd-[converted]."

  If you open this file, and then save it as your current version, it behaves as expected.

• What is the substitute in Windows XP for the command "netsh wlan set hostdenetwork mod = enable...". "in Windows 7?

  It seems that the command "netsh wlan set hostednetwork mod = enable...". "in widows 7 do not leave in windows xp. Is any other breed cannot as a substitute for the purpose of putting a wlan host in Windows XP?

  Hello

  The question you posted would be better suited to the Technet community. Please visit the link below to find a community that will provide the best support.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• Can join a Cluster of storage disk out of Maintenance DTS Mode to set up the profiles for a virtual machine storage policies?...

  Can join a Cluster of storage disk out of Maintenance DTS Mode to set up the profiles for a virtual machine storage policies?...

  
  IE can you define the rules of affinity DTS depending on how the rules of storage of profiles are configured for a virtual machine?

  In my mind it seems there is disconnect from the DTS and storage profiles.

  Thank you.

  = NOTE =.

  My lab at home, 2 organizes running ESXi 5.0

  Dv01 has

  Of startup vmfs 7200 RPM 160 G = dv01-BOOT

  Vmfs 1 TB 7200 RPM = VM02-VMFS

  VM02 has

  Of startup vmfs 7200 RPM 160 G = VM02-BOOT

  Vmfs 1 TB 7200 RPM = VM02-VMFS

  Vmfs 5900 RPM 2 TB = VM02-TV01

  I have (3) facility profiles of storage using 'User-defined storage Capablity' as shown below:

  (160 @ 7200 RPM SATA) boot > Boot

  Fast (160 7200 RPM SATA and 1 TB @ 7200 RPM SATA) > fast

  Slow (2 TB @ 5900 RPM SATA) > slow

  Then, I set up a storage Cluster with my local disks on dv01 (only to date)

  LocalVM disc dv01-BOOT and dv01-VMFS disk of the 'cluster of storage.

  I have a computer virtual called DC01 (HardDisk1) want to live on 'Boot' profile storage drive
  His "Non-compliant" poster according to the storage profile, it should run on drive 'boot' on dv01

  To get to this point, I put the StorageCluster in Mode of Maintenace 'DTS' and forced a sVmotion of all virtual machines off dv01-BOOT

  No disks are IO or claim of space.

  But once I take the 'DTS Maintenacne mode' STARTUP dv01 floppy is now get the DTS to return him to satisfy the storage profile (rule) I install... IE do the 'storage profile' VM complient (without doing a few externall API, the PS script or the 3rd party software calls)... ??

  Seems weird it is (or may be) such disconnection of a memory of the profiles and the StorageClusters and the DTS?

  Thank you...

  At this point, I think that storage DRS and storage profiles are two technologies to separate and work independently, but what you suggest is a great idea-

• Security setting Internet properties continues to change on its own / CPU of the computer goes Haywire / 15 + Instances of dllhost.exe * 32 Com substitutes

  I have seen that this is a problem for more than just me by reading online about this.

  See:

  http://www.bleepingcomputer.com/forums/t/554044/slow-Internet-IE-security-settings-keep-changing/

  http://community.Norton.com/forums/trojanpoweliks-multiple-dllhostexe-32-processes-and-PowerShell-Windows-7

  I need the solution and you can't find it.

  Most of the places online say download all these other programs but never say what is really happening.

  I hope you guys can help.

  Windows 7 Home Premium PC

  THAT IS TO SAY 11

  I did add something new to my pc.  It started randomly happening...

  What I've noticed, is my computer will be stronger, as it is to wrap upward and the CPU goes crazy.

  After that research around these things, I noticed happen when this noise starts and the CPU going nuts:

  -Under Internet Security my settings changed on their own to custom

  (I then change them back only to have this all happen again minutes later)

  -When this is happening and I'm going under dllhost.exe Task Manager suddenly over 15 years * 32 Com alternatives pop up all at the same time

  I do stop by changing my Internet Security properties to default and putting an end to the tree of processes all the dllhost.exe * 32 Com substitutes.

  Then, about 5 or 10 minutes later it happens again. This has happened in recent days.  I ran safely scan and it found some VirToolWin32 - CeeInject.gen! KK (linked in Adobe Updater). This VirTool:MSIL/injector.BF has been removed but all that I mentioned above is still ongoing.

  I have apprecitate your answer. Thank you

  It arrived today.  I checked the updates as soon as I logged in and it was so maybe that fixed the issue.

  Update definition for Microsoft Security Essentials - KB2310138 (definition of 1.187.1412.0)

  I'll keep the links you posted and use them to check everything. I am running the Microsoft Safety Scanner again now, I ran it yesterday and he did not find anything.

  Another weird thing, all my update history disappeared. It says updated, ever. Now it only shows the update one alone that I did when I opened a session today.

• prototype allows to substitute the get/set accessor?

  Is - this there anyway use the prototype to override a getter/setter? I know that you can override the functions as follows:

      prototype.toString = function()
      {
          // statements
      };
  

  I was wondering if it is possible to do the same thing with a getter/setter?  If so, what is the syntax?

  Thank you

  j

  No way to add running replacements, or change the class definition at run time or even create new classes at runtime, unless you build through the old regime of prototype classes, that use without Flex classes.

  Alex Harui

  Flex SDK Developer

  Adobe Systems Inc..

  Blog: http://blogs.adobe.com/aharui

• How to set the new tab to open a homepage

  After the recent update to version 44.0.1 I lost the ability to open a new tab and open the new tab homepage. Someone can help me.

  Thank you

  Do you mean when you open a new tab, you want to see your regular home page instead of the page of the new integrated tab on Firefox?

  41 of Firefox is no longer uses the browser.newtab.url setting in about: config because he was constantly attacked by malware. From 41 of Firefox, you need an add-on to change the new tab page.

  Here are a few options (I'm learning more all the time):

  • If you are already using the "Restorer of classic theme" or "Tab Mix Plus" extension: There is an option somewhere (!) in his dialogues of the parameters to select another page in the new tab.
  • If you want to use your new tab homepage: Try https://addons.mozilla.org/firefox/addon/new-tab-homepage/
  • If you want to set another page or a completely blank page: Try https://addons.mozilla.org/firefox/addon/new-tab-override/
  • If you want the cursor to move in a search box in the page: Try https://addons.mozilla.org/firefox/addon/custom-new-tab/

  Use only one of these methods at the same time, otherwise there may be conflicts and dysfunctions.

  Setting up substitute new tab and new tab custom

  After installing one of these extensions, you must use the Options page to set the new desired tab page (instead of use subject: config).

  Open the page modules using either:

  • CTRL + SHIFT + a (Mac: Cmd + shift + a)
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click Extensions. Then on the side right, find the new tab replace or custom new tab and click on the Options button. (See first screenshot attached).

  New tab Override

  Depending on the size of your screen, you may need to scroll down to enter the address in the form. (See second screenshot attached). For example:

  • (Default) page thumbnails = > subject: newtab
  • Blank tab = > subject: empty
  • Built-in Firefox homepage = > topic: welcome
  • Any other page = > full URL of the page

  Then tab or click this form field and you can test using Ctrl + t.

  Custom new tab

  It is easy to enter your favourite homepage address. If you check either of the boxes, the expansion will set the focus in the page as well, for example, the cursor will be in the Google search box. (See third screenshot attached). I had to leave Firefox and start it up again before new custom tab started working, but this may have been due to tests so many extensions back to back.

  Success?

• How can I set my tabs so google opens as soon as I open a new tab?

  I had firefox put in place, that if I open a new tab, google would be the page. About: config the browser.newtab.url still says www.google.nl, but all I get is a choice to have the tiles or a page completely empty.

  41 of Firefox is no longer uses the browser.newtab.url setting in about: config because he was constantly attacked by malware. From 41 of Firefox, you need an add-on to change the new tab page.

  Here are a few options (I'm learning more all the time):

  • If you are already using the extension classic restaurateur theme: There is an option somewhere (!) in his dialogues of the parameters to select another page in the new tab.
  • If you want to use your home page on the new tab - if www.google.nl is your homepage, too: Try https://addons.mozilla.org/firefox/addon/new-tab-homepage/
  • If you want to set another page or a completely blank page: Try https://addons.mozilla.org/firefox/addon/new-tab-override/

  Use only one of these methods at the same time, otherwise there may be conflicts and dysfunctions.

  Setting up substitute again tab

  After installing this extension, you must use the Options page to set the new desired tab page (instead of use subject: config).

  Open the page modules using either:

  • CTRL + SHIFT + a (Mac: Cmd + shift + a)
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click Extensions. Then on the side right, find the new tab override and click the Options button. (See first screenshot attached).

  Depending on the size of your screen, you may need to scroll down to enter the address in the form. (See second screenshot attached). For example:

  • (Default) page thumbnails = > subject: newtab
  • Blank tab = > subject: empty
  • Built-in Firefox homepage = > topic: welcome
  • Any other page = > full URL of the page

  Then tab or click this form field and you can test using Ctrl + t.

  Success?

  Once you have set it as you wish, you can close the Add-ons page (or use the back button to return to the list of Extensions of this Options page).

• Its DTS can't find my headphone

  I have a problem with the sound dts, it randomly allows to switch between the headset and speakers output and when it is on the output speaksers the quality of the sound is terrible. When I have disbable dts audio I have no problem but then is not terrible sound quality.

  Hello

  The sound of the Studio DTS improves the sound quality (if his permit)

  You can set this improved sound internal speaker, 1 external (helmet) or external 2 (if connected external speakers)

  For each of the three modes, you can configure the sound surround, max volume and bass amplification.

  So according to the output device audio you use, you should choose the right DTS Studio Sound output mode.