What is the substitute in Windows XP for the command "netsh wlan set hostdenetwork mod = enable...". "in Windows 7?

Similar Questions

• What does the command netsh reset?

  I had problems with my internet connection on my laptop before and I was told that if I put something else in my internet, it may help. Netsh int ip reset, what exactly? When is it useful?

  Thank you.

  Using the NetShell utility you can reset the TCP/IP stack to a State of origin for the same State when the operating system has been installed.

  _Microsoft provides this information: _
  The reset command (netsh) is available in the context of the NetShell utility IP. When you run the reset command, it rewrites pertinent registry keys that are used by the protocol stack Internet (TCP/IP) to achieve the same result as the removal and the reinstallation of the Protocol.

  How to reset the Protocol Internet (TCP/IP) in Windows XP
  http://support.Microsoft.com/kb/299357

  Good bye

• Unable to connect to the SSID network which has the Double course using the command Netsh Wlan

  I tried to create a batch file that would connect to a wireless network, the name of the SSID is:

  simple "13."

  When I try to use the command:

  netsh wlan connect easy "13".

  It returns an error saying that the profile does not exist.

  I tried to use the following escape characters:

  netsh wlan connect easy \"13\.

  netsh wlan connect ' easy '13.

  But nothing seems to work and I can't find anything related on google. Can someone help me?

  Thank you

  Rene S.

  Hello René,.

  Thanks for posting your query in Microsoft Community Forum.

  You try to create a batch file to your question, I would say that you re - ask your question in the MSDN forum rather than on this forum. MSDN is watched by other computing professionals and developers who would more than likely be able to help.
  http://social.msdn.Microsoft.com/forums/en-us/windowsgeneraldevelopmentissues

  Hope this information is useful.

• What is the command of shortcut for all windows get the information from the computer?

  What is the command of shortcut for all windows get the information from the computer?

  instead of going to the computer / my computer > properties > discover the pc... basic information or go to the control panel...

  just a command for windows xp, vista, 7 for system looking for information....

  original title: what is the SHORTCUT COMMAND to get information from the computer system?

  Hello BlackSecret,

  The keyboard shortcut to get to the top of this information is Windows key + break Attn.
  
  
  Who does what you ask?

• What is the command run for removal of malicous tool?

  What is the command to run the malicous software removal tool?

  If the malicious software removal tool is installed on your machine you can start it by clicking on Start > click run > then type in MRT. EXE and press OK

  Instructions on how to use the tool can be found here: http://www.mydigitallife.info/how-to-use-windows-malicious-software-removal-tool-mrtexe-in-vista-xp-2000-and-2k3/

• What is the command key to trash preferences start with CC 2014?

  What is the command key to trash preferences start with CC 2014?

  Thank you.

  Hello

  • To restore default preferences settings, hold down Alt (Windows) or Option (Mac OS) during the startup of the application. You can release the Alt or Option key pressed when the splash screen is displayed.
  • To restore default preferences settings and the plugin cache at the same time, hold down the Shift - Alt (Windows) or shift-Option (Mac OS) during the startup of the application. Release the keys Shift - Alt or shift-Option key when the splash screen is displayed.

  Visit the below help page for more information

  Adobe Premiere Pro help. Preferences

  Thank you

  Mohd Naseem.

• What is the command 'grow' in Photoshop CC 2014?

  Photoshop CC 2014

  Windows 8.1

  What is the command 'grow' in Photoshop CC 2014?

  I think I found the answer: How to apply the Grow and similar commands in Photoshop CS6 - for Dummies

• Apple Extreme, Time Capsule and Express on the same system, what is the best way to set it up so that all devices smoothly from one end of the House to another?

  Apple Extreme, Time Capsule and Express on the same system, what is the best way to set it up so that all devices smoothly from one end of the House to another?

  I'm going to assume that you plan to have wireless devices.

  Let's say that the Capsule is your "main" router  If this is the case, then it must be located in the House, so that the distance between the time Capsule is the same for the outside walls of the House.

  Then, on the 'left' side of the House, looking for an airport to midway between the Capsule and time of the outer wall of the House. Do the same thing the 'right' side of the House.

  In other words, each of the two airports that "extend" the wireless signal are located at equal distance from the Capsule of time... but they are in opposite ends of the House.

  If you intend to interconnect all the airports and Time Capsule using a permanent, Ethernet wired... which by far is the 'best' way to put in place a network in terms of performance and reliability... then you can locate one of the devices anywhere you want.

• What is the command to view the Configuration of RMAN

  What is the command to view the Configuration of RMAN

  in oracle 11g R2

  Hello

  You have to look in the documentation?

  The SHOW ALL command will show you the configuration. Is that what you're looking for?

• What is the command to see the database

  What is the command to see the database? IAM using oracle express edition that I tried to create a database but it shows the database already created.

  I need to check what database is created.

  Log in as "sys as sysdba" in sqlplus to the command prompt

  Run "select * from database v$;

  BTW how you try to create a database?

• What is the command to mount an NFS share?

  What is the command that allows to mount an NFS share from a host ESX 4.1?

  See page 59

  http://www.VMware.com/PDF/vSphere4/R41/vsp4_41_vcli_inst_script.PDF

• What is the command to access management for

  could someone explain pls what is the exact purpose of the access management command.

  Assane

  1. it is not feasible to Telnet for the pix outside interface under any circumstance, you can just telnet to the inside interface with the command 'management-access' on the remote vpn access.

  2 Yes, the command 'telnet on the inside' is needed on top of the command "access management". as a general rule, no acl only if necessary.

  3. "but is it possible to have a client who cannot have access to the administration of the Interior. assuming that you are referring to restrict access remote vpn for the pix inside interface. with v6.x, connection vpn can be restricted by an incoming acl assuming that the command "sysopt connection permit-ipsec" is disabled.

  for example

  No ipsec sysopt connection permit

  access-list 111 permit tcp host eq 23

  allow IP access-list 111

  allow IP access-list 111

  Access-group 111 in external interface

  the first entry is used to restrict remote access vpn Telnet for pix inside interface only; the second entry is used to allow another group of remote user in order to get full access with remote vpn access. and the third section is used to allow a lan - lan vpn for a branch.

• What is the command to force a mac to reboot using mac os original version?

  What is the General Mac OS command to force a Mac to use restart (on the internet) is the original version of Mac OS (it has been bundled with)?  I am told that it is by a non-Apple technician.

  For a Mac that shipped with 10.7 or newer, Option, command, and R.

  For a Mac comes with an earlier version of Mac OS X, it is not a. These Macs require a DVD (or thumbdrive for MacBook Air) to reload the original OS.

  (137928)

• What is the best way to set a built-in webcam?

  My phone fell recently on his side of the counter for hardwood floor. My laptop (HP Pavilion g6) survived the fall and has seemed to suffer only a minor chip on the upper left. Everything seemed to remain as it was before the fall. The next time I tried to use my webcam, however, seems to be zoomed in its entirety and not in the update. When I place my thumb on the camera, it changes the lighting for a second before returning to its original state blurred. I think that the webcam is still working but perhaps has been jumped or moved? What is the best move for me to have this problem?  I lack the idea of buying an external webcam.

  Hi krissy2314,

  As mentioned by Hula_Baloo in the previous post, you need to contact the manufacturer of the computer for help because it is an built-in webcam.

  See the article-

  http://WWW8.HP.com/us/en/support-drivers.html?JumpID=ex_r11400_us/en//IPG/_ps_g_hpsupport/support&k_clickid=AMS | 13. 49711 | 6c4926f7-3e17-8788-b2d6 - 00003475191c

   

  Hope this helps!

• What is the average of default setting in the subject area Permission screen in SPR

  Hello gurus,

  We use OBIEE 11.1.1.7.150120. Trying to figure out how to play the permissions on the domain object.

  What is the average of the 'default' setting?  It translates to 'Read-write' or 'Read' or 'access forbidden '?  or business being a top-level object, the parameter 'Default' basically inherits the permission set for the application role "AuthenticatedUser"?

  Thank you

  Rakesh

  Hello

  Here is a copy/paste of the 'help' in the administration tool:

  By default. The permission is inherited from the parent object. Areas, because they are a higher level object, default value is equivalent to the permission granted to the application role AuthenticatedUser.

  If you ask for materials, 'default' in this case means same permission as an authenticated user.