Setting focus to the input text area

Similar Questions

• How to detect if the cursor is no longer within the input text area

  Hello.

  My question today is:

  How to detect (in AS3) if the cursor is no longer within the input text area?

  I tried to mouse events, events, events in text but without success.

  Any ideas?

  Concerning

  If you have a textfield of entry with the instance name it '...

  it.addEventListener (FocusEvent.FOCUS_OUT, focusOutHandler);

  function focusOutHandler(evt:FocusEvent):void {}
  trace (evt. Target.Name);
  }

• How to check the answer in the input text area

  Hey, I have a project for school on the colons and semicolons. As part of it, I want to make a box of text input that puts the answer to a question in the player then clicks on a button that controls the input box, and if its correct goes to a correct screen so bad it goes to a screen that is incorrect. Unfortunately I do not know how to do someone help me. Thank you!

  var answerA:Array is ["the correct answer to the question 1', 'address 2', '3 ', answer...];.

  var questionA:Array = ['question 1', "Q2", "q3",...];

  var currentQuestion:int = 0;

  checkAnswer.addEventListener (MouseEvent.CLICK, checkF);

  function checkF(e:MouseEvent):void {}

  {if (answer_tf. Text is answerA [currentQuestion])}

  as much as goto

  }

  }

  increment currentQuestion somewhere

  Check if the quiz is completed.

• disappears from the input text area

  I know it must be something simple, but it's still my butt.  I put a text on a layer entry box and everything seems fine.  I play the movie, and any text box?  If I put a top filter, it will be displayed, but otherwise, it seems that there is nothing there.  Not even the border is visible.  All static text is good, just without input box.

  «.. . "just one of those days."

  Dynamic textfields get cranky for any type of animation or if a mask is applied to them.  You could try the incorporation of police and see if that makes a difference (I don't know why it would be... it is usually the text that has the problem, but then again, it's usually just dynamic text fields that raise this problem (no dynamic input textfields).)

• How to set the width of the input text

  Hello
  
  
  I form, which have little input text.the layout of the form is not correct.some input text is so long, it's hard to do in any seizure of text the same length. Some inputtext have varchar2 (1000). How do I?

  Hello

  first of all to mention the jdev version that you are working

  In the input text is property called columns. You can give a value such as 200 or 300 according to your need.

  Try this.

• Refresh an input text area

  A popup main user selects the check boxes for a few (3) lines in the list and click on send.
  submit button-> bean managed-> shows second popup.
  In a second window, we have a text entry area where we show "you have selected 3 elements.
  
  The input text is binding to the managed bean where I put the message "" you selected 3 items".
  
  It works very well.
  
  But when I close the second popup and return to the main window and select 5 check boxes and click on submit, it still shows
  "you have selected 3 elements.
  
  No idea what that can do to show the "you have selected the 5 elements.
  
  Thank you

  My best off the cuff guess is to change attribute of default ContentDelivery of your popup to Lazy to Lazy (Uncached)

• How to display the ToolTip when the input text is disable

  How to display the ToolTip when the input text is disable?

  Just checked in FF and IE11, works fine for me (jdev 12.1.3)

  Dario

• How to restrict the scope of the EU change when the input data are not available?

  Hi Experts,
  
  I have a user enter-able (EU) field in the Section. When the tag input XML contains data for this field, then the value must print in this area and it is not editable.
  If the input data are not available only that one time that the field of the EU must be editable.
  
  Any thoughts?
  
  I tried like below,
  
  Domain name creation: UE_CompName
  Length: 15
  Type: alphanumeric
  Rule: XDD
  Source name:! Transaction/Compname
  under PreEdit,.
  module: DALW32
  Procedure: procedure of desired
  Information: CALL ("UE_CHECK")
  
  like that, I've updated in the field properties.
  
  Content of UE_CHECK DAL below,
  
  CurrFieldName = Fieldname()
  CurrFieldData = @("CurrFieldName")
  
  IF CurrFieldData! = « »
  SetProtect ("CurrFieldName")
  END
  But it does not work... Pls help me to do this...

  I assume that the 'mapping' occurs during a batch operation (Gendata) through any rule the XDD defined for this field. In the batch, pre and Post Edit calculations do not. This feature is related to the WIP/entry. What you can do is to add a level section - PostImageDAL rule to call your script and protect your land once it was located batch of your operation.

  In FAP that contains that field, add the PostImageDAL rule in the property of the rules in the Section box. In the data box, do call your script.
  Your script is a bit wrong, it seems you were trying to get the 'current' domain name and then check the value of fields. Drop the part and simply name your field in the string in quotation marks in the @ () function and the SetProtect.

• Height of the input text box...

  Hi all
  
  Is there a way to dynamically get the size of an input text throught javascript box? For example, I have an < input type = "text" id = "myBox" size = "50" >, and I would like to get the height of the text box with the id "myBox" through javascript dynamically.
  
  Thanks in advance!

  Daverms wrote:
  > Hi,.
  >
  > You can not retrieve the height of the text box since there are actually no 'height' attribute is available for theand also the width is represented as an attribute of "size".

  a text box CAN have HEIGHT and WIDTH set in style = attribute.
  If so, you can get these values with
  document.getElementById("yourid").style.height and
  document.getElementById("yourid").style.width

  However, WITHOUT setting the height and width in the style = attribute, that you can't
  get the default width/height of a textbox
  --

  Azadi Saryev
  SABAI - Dee.com
  http://www.SABAI-Dee.com

• total dynamic input text area help

  Hey people,

  I have four areas of input text that I want a user to enter numbers. I have their instance names on the text box itself, but nothing stated in his. I have a total box as a dynamic, with the name totalbox. If I wanted to have the total area to display the sum of all the numbers from input boxes, how would we go to this topic. I seem to formulas autour, just do not know how to get the numbers appears in the dynamic area. Any ideas?

  You can use an if statement to assign 0 to empty textfields and you can use the restrict property of textfields to restrict entry to the numbers

  :

  for (var i: int = 1; i<>

  This ["costbox" + i] .restrict = "0-9";

  {if (this ["costbox" + i]. (Text=="")}

  This ["costbox" + i] .text = 0;

  }

  }

• Setting Focus on the header of the accordion

  Hi all
  
  I have a form application based with 3 strips of accordion and need to navigate using the keyboard only. I can't tab on the accordion header to allow the user to press space / Enter to move to the next section.
  
  Anyone know how to set the focus on the accordion header using the tab key?
  
  Thank you very much
  Annie

  Hello

  Never found a solution about it - had move the focus to an input field with a listener. Once the hidden field received focus, the function of earphone managed the press space bar event and dispatched an event click on the header depending on accordion.

  Annie.

• Problem adding images to the html text area.

  This, like a flying Executive pants down, is driving me crazy...
  
  Source can be downloaded where says "herehere" below (not used on this forum, seems a bit odd.)
  
  I have 2 text boxes on the stage, both are the "multiline" value and configured to return 'html '.
  they can also be programmed to display the contents of variables html1 and html2 respectively
  Thanks to the field "Var" in the Properties window. (if it's one thing to Actionscript 2).
  
  the html code that I use is a very basic < img src / > tag.
  You can use any small image file that you want to try, just change the two names of source files.
  (mine happened to be called bonkers.jpg, but gif and png seems to be the same).
  
  When I define "html1" directly, it works very well.
  If I set "html2" directly it works fine,
  However if I set html2 via a table, although the contents of the html1 both two html2 looks the same.
  (and all tracing code following checks it) the second html box does not work.
  
  It took me the better part of a day to understand that it was the process of transfer of an array
  that was the origin of the problem, but why? What does an array into a string that allows you to stop working in html?
  
  Any help would be appreciated.
  Thank you
  Gas
  
  
  
  here here

  Thanks, that certainly seems to overcome the problem. I was beginning to think it was me :), but obviously display of the variables in a html text box can be a little bug in flash.

  I called box1 and box2 and box1.htmlText =... to change the values, it now works fine.

  Thanks a lot for this.

• I want to accept only Arab characters in the input text

  Hello

  Is it possible to let the user just write in Arabic in the af input text?

  If he enter English tank when you use keyboard ENG that I want to prevent this event and not let him write without error msg and if it helps keyboard AR I want let write

  Thank you.

  You can implement something like this using javascript. You should prevent the addition of English characters of:

  -Keyboard

  -By using ctrl + v (in case you have copied English words)

  -Using right-click + spent (in the case where you have copied English words)

  To do this test to track the following:

  1 - inside af:inputText add 2 clientListener. One to accept only Arabic characters and the other for the deactivation of ctrl + v as:

  2 - Add af:resource with type = "javascript" and inside this write three functions:

  -an acceptArabic function.

  b disabledPastFunction

  c disabled right click on the page.

  as:

  
  
          = 1560 && k <= 1610) || k == 32)
      {
      }
      else
      {
        evt.cancel();
      }
    }
    ]]>
  
    function disabledPastFunction(evt)
    {
      var k=evt.getKeyCode();
      var e = window.event;
  
      if(e.ctrlKey)
      {
        if (window.event.keyCode == 86)
        {
          evt.cancel();
        }
      }
    }
  
    function dis_rightclickNS(e)
    {
      if ((document.layers || document.getElementById && !document.all) && (e.which == 2 || e.which == 3))
      {
        return false;
      }
    }
    if (document.layers)
    {
      document.captureEvents(Event.MOUSEDOWN);
      document.onmousedown = dis_rightclickNS;
    }
    else if (document.all && !document.getElementById)
    {
      document.onmousedown = dis_rightclickIE;
    }
    document.oncontextmenu = new Function("return false")
  
  

• Setting Focus when the Page is loaded

  Apex 3.2

  Theme 15

  IE8

  I'm trying to focus on the loading of the page with javascript

  OnLoad = "$f_First_field ('P10_BMI_EXTKEY')" "

  Now users have asked for this field a dynamic default value (always 4 characters),

  for example, DEM -.

  I'll put this using one before the header is calculated.

  How can I set the focus when loading for the fifth character in my field, that is to say, after DEM -.

  Thanks in advance

  Gus

  Gus,

  It's true. SelectionRange works only when the focus is actually on the ground. Indeed, so you will first need to focus on the issue and then run the code selectionrange. Take care of property: the post SO talking about a 'problem' of synchronization, where the focus is always past before execution of the selection range. Try it, you need it. Basically, with the polyfill in place you will be able to use the code in the linked thread stackoverflow. To keep your manageable onload tag, you can move the focus + selection code in a function.

• The input text formatting

  Hello
  
  I have a requirement for formatting the text entry in a format [(XXX) XXX-XXXX phone number].
  
  Implementation:

  1.Defined an input text component in the UI.
          <af:inputText id="it2" value="#{pageFlowScope.testAppBean.phoneNumber}" label="Enter Phone number:">
              <f:converter converterId="CustomConverter"/>
          </af:inputText>
  
  2.Implemented custom converter as mentioned below.
  public class CustomConverter implements javax.faces.convert.Converter, org.apache.myfaces.trinidad.convert.ClientConverter{    
      public CustomConverter() {
          super();
      }
  
      public Object getAsObject(FacesContext facesContext,
                                UIComponent uiComponent, String value) {
          if (value == null || (value.trim().length() == 0))
                       {
                           return value;
                       }
             
               // format phone numbers to display correctly
             
                 String phone = value.trim();
                 if (phone.length() == 10) {
                     phone = phone.substring(0, 3) + "-" + phone.substring(3, 6) + "-" + phone.substring(6, 10);
                 }
                 else if (phone.matches("\\d{10}\\s*\\d+")) {
                     phone = phone.replaceAll("\\s+", "");
                     phone = phone.substring(0, 3) + "-" + phone.substring(3, 6) + "-" + phone.substring(6, 10) + " x" + phone.substring(10);
                 }
           
               return phone;
      }
  
      public String getAsString(FacesContext facesContext,
                                UIComponent uiComponent, Object value) {        
          
          String phoneNumber = (String)value;
                   if (phoneNumber == null || (phoneNumber.trim().length() == 0))
                    {
                        return "";
                    }
                    String phone = phoneNumber.trim();
  
  
                    if (phone.length() == 10) {
                        phone = phone.substring(0, 3) + "-" + phone.substring(3, 6) + "-" + phone.substring(6, 10);
                    }
                    else if (phone.matches("\\d{10}\\s*\\d+")) {
                        phone = phone.replaceAll("\\s+", "");
                        phone = phone.substring(0, 3) + "-" + phone.substring(3, 6) + "-" + phone.substring(6, 10) + " x" + phone.substring(10);
                    }
                  
                  return phone;
      }
  
      public String getClientLibrarySource(FacesContext facesContext) {
          return null;
      }
  
      public Collection<String> getClientImportNames() {
          return Collections.emptySet();
      }
  
      public String getClientScript(FacesContext facesContext,
                                    UIComponent uiComponent) {
          return null;
      }
  
      public String getClientConversion(FacesContext facesContext,
                                        UIComponent uiComponent) {
          return null;
      }
  }
  3.Registered in faces-config.xml
   <converter>
      <description>A Converter for phone number</description>
      <converter-id>CustomConverter</converter-id>
      <converter-class>view.util.CustomConverter</converter-class>    
      </converter>
  
  4.Ran the application.

  The question is, at the entrance of text in text box... the custom converter is not called. Can someone help me to convert the text entered in planned phone number format.
  
  * Note: I expect that for every key stroke... the custom converter is called.
  
  Kind regards
  Kiran

  Check out this blog https://blogs.oracle.com/jdevotnharvest/entry/get_social_security_numbers_right
  or this example: http://multikoop.blogspot.de/2012/11/adf-smart-input-date-client-converter.html

  Timo