Setting up the environment of the customer for multilingual support

Similar Questions

• where can I get advice on how to set up the iPad for a partially sighted person

  Where can I get advice on how to set up the iPad for a partially sighted person. Are there apps that can help the user, perhaps activated by voice?

  Paul,

  Go to http://help.apple.com/ipad/9/#/iPad9a2465f9and see all the topics under accessibility.

  

• Apple "final cut pro 7", high res Pro 422lt 1920 x 1080 (odd) clips, is this gradual?, no 1080 progressive setting sequence, how can I ensure that I have the best setting of the timeline for my clips

  Apple "final cut pro 7", high res Pro 422lt 1920 x 1080 (odd) clips, is this gradual?, no sequence definition 1080 progressive

  How can I make sure that I have the best setting of the timeline for my clips. I did all the settings of Mount clips but there is no progressive setting for 1080 p. Images originally dslr Nikon that I used mpeg streamclip to convert to prores. Thanks for your help!

  The frame for you size source of material is HDTV 1080i (16:9). That only sets the size of the image, not the domination of the field, it's what makes progressive or interlaced. The reason it's labels with the 'i' is that when FCP7 was abandoned by Apple, they have never updated the software in order to take account of 1080 p contents.

  To make your progressive sequence, set the dominant field to None.

  gerforce wrote:

  Images originally dslr Nikon that I used mpeg streamclip to convert to prores.

  In your screenshot of the properties of the element for your clip to the source, the material is interlaced. At the original camera file interlaced or progressive?

  Also, the fps footage was actually 30 original and 29.97 not standard?  30 images/s is very limited its use.

  MtD

• printer HP from Mac 10.5.8 deskjet 970cse how to set up the printer for the printing of the project

  printer HP from Mac 10.5.8 deskjet 970cse how to set up the printer for the printing of the project

  Hello

  You can find out how to access and change the settings of quality below:

  http://support.HP.com/us-en/document/c01662356

  Kind regards

  Shlomi

• Facing a problem with writing the custom for WLS identity assertion provider

  I am facing a problem with writing the custom for WLS identity assertion provider.

  Requirement:

  Asserter identity configured in WLS should get called when the following cookie is sent in a request by my application
  cookie name: OAMAuthnCookie_blr1234567.idc.oracle.com:7777
  
  I added the name of the cookie as a token of support and Active token in WeblogicCustomIdentityAsserter.xml
  
  < MBeanAttribute
  Name = "SupportedTypes.
  Type = "java.lang.String [].
  Writeable = "false".
  Default = "new String() {& quot; OAMAuthnCookie_blr1234567.idc.oracle.com:7777 & quot ;}.
  / >
  <!-ActiveTypes attribute contains the subset of your mbean SupportedTypes who are active in the area. ->
  < MBeanAttribute
  Name = "ActiveTypes".
  Type = "java.lang.String [].
  Default = "new String() {& quot; OAMAuthnCookie_blr1234567.idc.oracle.com:7777 & quot ;}.
  / >

  Problem:

  Identity asserter provider is not invoked for the request that has the cookie named OAMAuthnCookie_blr1234567.idc.oracle.com:7777.
  
  I did some experiments with the cookie name, to see where the problem could be
  
  Identity asserter provider is triggered for the following cookies:
  OAMAuthnCookie_blr1234567.idc.oracle.com7777.
  blr1234567. IDC. Oracle
  blr12_XXX. IDC. Oracle.com
  
  and it does not work for cookie name - OAMAuthnCookie_blr1234567.idc.oracle.com:7777
  
  I think that the name of the token supports not the colon. I don't have control over the name of the cookie, two points will always be
  
  Tried it with giving the name of the cookie after the encoding of the colon
  

  < MBeanAttribute

  Name = "SupportedTypes.

  Type = "java.lang.String [].

  Writeable = "false".

  Default = "new String() {& quot; OAMAuthnCookie_blr2211441.idc.oracle.com & #58;. 7777 & quot ;} »

  / >

  
  But still does not work
  Am I missing something? Any help will be appreciated.
  Help, please!

  colon ': ' is an illegal character in the name of the cookie.

  RFC 2616, Section 2.2 says:

  token = 1 *.

  separators = "(" | ")" | " <" |="" "="">" | " @"

  | "," | ";" | ":" | " \" |<">

  | "/" | "[" | "]" | "?" | "="

  | "{" | "}" | SP | HT

  It is clear ":" a "separator" and thus not allowed in a token or a cookie name.

• Can join a Cluster of storage disk out of Maintenance DTS Mode to set up the profiles for a virtual machine storage policies?...

  Can join a Cluster of storage disk out of Maintenance DTS Mode to set up the profiles for a virtual machine storage policies?...

  
  IE can you define the rules of affinity DTS depending on how the rules of storage of profiles are configured for a virtual machine?

  In my mind it seems there is disconnect from the DTS and storage profiles.

  Thank you.

  = NOTE =.

  My lab at home, 2 organizes running ESXi 5.0

  Dv01 has

  Of startup vmfs 7200 RPM 160 G = dv01-BOOT

  Vmfs 1 TB 7200 RPM = VM02-VMFS

  VM02 has

  Of startup vmfs 7200 RPM 160 G = VM02-BOOT

  Vmfs 1 TB 7200 RPM = VM02-VMFS

  Vmfs 5900 RPM 2 TB = VM02-TV01

  I have (3) facility profiles of storage using 'User-defined storage Capablity' as shown below:

  (160 @ 7200 RPM SATA) boot > Boot

  Fast (160 7200 RPM SATA and 1 TB @ 7200 RPM SATA) > fast

  Slow (2 TB @ 5900 RPM SATA) > slow

  Then, I set up a storage Cluster with my local disks on dv01 (only to date)

  LocalVM disc dv01-BOOT and dv01-VMFS disk of the 'cluster of storage.

  I have a computer virtual called DC01 (HardDisk1) want to live on 'Boot' profile storage drive
  His "Non-compliant" poster according to the storage profile, it should run on drive 'boot' on dv01

  To get to this point, I put the StorageCluster in Mode of Maintenace 'DTS' and forced a sVmotion of all virtual machines off dv01-BOOT

  No disks are IO or claim of space.

  But once I take the 'DTS Maintenacne mode' STARTUP dv01 floppy is now get the DTS to return him to satisfy the storage profile (rule) I install... IE do the 'storage profile' VM complient (without doing a few externall API, the PS script or the 3rd party software calls)... ??

  Seems weird it is (or may be) such disconnection of a memory of the profiles and the StorageClusters and the DTS?

  Thank you...

  At this point, I think that storage DRS and storage profiles are two technologies to separate and work independently, but what you suggest is a great idea-

• Problem installing KB980408 - set up the parameters for custom: Windows Desktop Update

  After installing KB980408, the computer restarts, goes through the normal boot process, displays the Windows logo, and then goes to a black screen with a window:

  Custom settings

  Implementation of the custom settings for:

  The Windows Desktop Update

  and stay on it indefinitely (4 + hours so far). Moving the mouse on the screen shows the circular cursor "wait", and I am able to move the window around; I am also able to start the Task Manager and restart, but that's all.

  So I thought another reboot may solve the problem, but it doesn't... it keeps just hung to this window.

  No matter who else affected by it, or have solutions to try?

  I had this same problem on both machines. During his connection, this behavior began immediately after the KB980408 update has been installed. The solution I found is to ctrl + alt + delete, start taskmgr and kill the task of custom settings. Then you have to manually run explorer.exe (file--> Run--> Explorer.exe) and windows should load as usual. The next time that I rebooted and logged in Windows loaded as usual. I'm guessing that this problem is a "run once" task. However, updates are not supposed to make your computer more stable?

• How to set up the password for the supervisor on Tecra A4

  Hello

  I want to activate a password for bios we give access my tecra A4. (supervisor password)

  But when I activate a password, it is for the start-up of the pc.

  I want to warn the user base to reach the bios without activating a password at the start of the pc.

  How can I do?

  Thank you

  Hello

  If you want to set the password for the supervisor so you should do it in the utility supervisor password.
  On my laptop, I found this utility in the assistance of Toshiba-> sure.
  I presume that it s also on your A4.

  There, you can start the supervisor password tool. Here, you have to choose the option saved.

  Please post if this works

• How to select the resolution of the PC to the customer for the execution of LV App?

  Hello

  My GUI is 1250 x 812. (assuming that it is the value of a pixel. This is measured using the width and height-> resize option object).  What resolution PC should I offer for the customer who is going to run this GUI?

  Thank you!

  1280 X 1024.

  List of common resolutions

  SXGA (1280 x 1024)

• Where can I get the age of empires II set up the file for Windows 8

  I don't know where I will get a full version of age of empires II the age of Kings for windows 8. I tried Google, but I just. Please give me a link where I can get the full version of the game for windows 8.

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you are unable to get age of Empire II set up the file.

  You can try to install it from Microsoft Store.

  https://support.Microsoft.com/en-us/pH/560/NL?WA=wsignin1.0

  You can contact the support of Age of Empires for better assistance.

  http://support.Microsoft.com/ph/7745

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• My touch screen blackBerry smartphones does not how to contact the customer for Filipino blackberry service

  help me get the contact number of the customer service of blackberry in the philippines

  Do a battery pull should fix your problem and prevent you having to make a phone call.  Just remove the battery while your phone is on and replace it a few seconds later.

  Let us know if that helps you.

• HP Photosmart 5520: what is the customer in canada support

  Can someone please tell me how to contact someone within HP for troubleshooting - I need to change the factory settings

  Preference to the good Canada that saw how reluctant, they seem to offer any kind of support not automated, I'll take anywhere in the world that has a human being at the end of the line.

  HP really went their best to make the customer experience as unpleasant as possible - I guess that they are too focused on the maximization of profits worry about stakeholders

  Hello:

  Call this number...

  1-800-HP-invent (1-800-474-6836)

• The network for ZFS supports "virtual storage device.

  Hello

  I'll put up a 5.1 ESXI machine to test the performance / proof of concept with a "storage device" in a virtual machine on a host computer.

  Right now I use a version of solaris (community edition of nexenta) to test.

  With success, I was able to set up the machine with through disk controllers and add a vswitch initial with a configured vmkernel port and a group of ports for virtual machines. -J' was able to set up comments solaris vm with two adapters e1000 in the vswitch, to be used for the management and the other configured with an address within the same private network that the port on the management... network vmkernel and things seem to work well.

  I wanted to test if there is no improvement in performance using the vmxnet3 adapter and have a completely 'virtual network' dedicated solely to the nfs traffic.

  So I created an additional vswitch without adapters attached to it, with an another vmkernel port and a second virtual machine portgroup and added a vmxnet3 adapter to my "vm storage" to go on this vswitch.

  Before I do, I was wondering if VMCI or anything else already going to do what I want (i.e. ESXi allow communicate with the computer in virtual storage on nfs with speeds above that the limitation of the e1000 adapter would provide by default)

  I say this because my initial test with iozone gave me numbers that seemed beyond 1 GB...

  So, to summarize, the e1000 would be made generally better than 1 Gbit of networking 'local' (in the same host); and (assuming that the handles of the tcp/ip stack of the guest OS UI VMXNET3 well - IE drivers, configuration, the efficiency of the OS.)  the VMXNET3 adapter would be even better.

  It can even better if the uplink to the physical network is faster.  The rate of 1GBit 'link' basically means nothing.

  If someone could point me to a 'best practice' guide or the discussion about setting up isolated networks 'private host' for best performance with NFS virtualized shared storage, I'd appreciate it. My plan is to implement three hosts, with the majority of local data stores to the same host, with little nfs traffic going to each box...

  Well, there's really only 1 way to set up a network of 'host-only', so I don't think you will find a guide BP.

  Also the terminology escapes me a bit, because 'virtual private network', 'private network' have other meanings in other contexts. Don't know what to call a network which has not set the physical network adapters and is localized to a single ESXi host...

  Most called it a network invited only.

• How to set up the reconciliation for a custom resource?

  Hello
  
  I have a custom connector, I need to implement. For a layout of this system, I'm going to write configuration information to a file. The target system takes this info and knows to eat somehow.
  
  I wonder how I can implement the process of reconciliation in this system of target back to IOM. Can IOM have a reconciliation of the target of a flat file?
  
  Any format of standards to follow?
  
  Thank you
  
  Khanh

  Simply create a flat file GTC connector. It's what he does. Reference:

  http://docs.Oracle.com/CD/E21764_01/doc.1111/e14309/about.htm#Toc153968019
  &
  http://docs.Oracle.com/CD/E21764_01/doc.1111/e14309/prdfnd_prov.htm#Toc153968039 for the Format CSV reconciliation provider and you would know how to do

• concatenate the hexadecimal code set by the user for communication series

  Hello.. I'm a newbie to LAbView. I am trying to contact a power supply Source. for which my order will be in the format of 4 to 5 bytes; for example, to set a voltage of 220 VAC, it's 1509 0898 in hexadecimal, 15 of which is binding for all orders of shaky writing, 09 for various operations such as setting Volatge or FREQ. and last four digits 0898 is a 2200 (by 220.0VAC) hex code.

  By sending the complete command 1509 0898 in hexadecimal Serail port communicating my source, even in the giving them using string concatenation as 1509 is the first chain and 0898 in second, it works fine.

  But these last two bytes would be defined by the user and can therefore vary in digital, so I put a number of Hex code conversion there before concatenation. who does not send the code Hex 0898 as reqd.  but this garbage to send value... 3038 3938

  Help, please... Thanks in advance...

  Ermani salvation,

  Here is a step by step journey: