Setup error program HR block tax

Similar Questions

• Win 7 64 - bit error 1402 Setup / Remove Programs r key blocked

  I tried to install MS Office 2010 and to install HP Officejet J4580.

  I tried to remove some programs.

  Win 7 64 - bit error 1402 Setup / Remove Programs r key blocked with unknown

  Hello

  1. do you receive the same error message when you try to install HP Officejet J4580?

  2 have you made any changes to the computer before the show?

  I suggest you follow these methods and check.

  Method 1: Run the application as administrator and check.

  Refer to this link: How to apply once with a full administrator access token?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-run-an-application-once-with-a-full-administrator-access-token

  Method 2: try to install using this printing software tool HP Officejet J4580.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Regarding the installation of MS Office 2010, you can visit this link and check if it helps. You receive an error message when you install an Office program or you open an Office program or a document

  http://support.Microsoft.com/kb/838687

  I hope this helps!

• I have a problem when I want to print an email page.it shows me an error that seems to come from a program that blocks the appearance windows.thos do sais.what do?

  Question
  I have a problem when I want to print an email page.it shows me an error that seems to come from a program that blocks the emerged Windows.ce do sais.what do? Edit

  Can you check this problem on Firefox 9?

  • getfirefox.com

• Windows 7 2000 error "this program is blocked due to compatibility issues"

  Original title: Windows 7 for 2000.

  I am trying to install Windows 2000 on a Windows 7 netbook so I can run older programs that are not stable on 7/8.1, but I'm stuck when the program compatibility Assistant gives me a message saying "this program is blocked due to compatibility issues... the installation cannot continue because th version of Windows on your computer is newer than the version on the CD.

  As suggested, a virtual machine would be better for running Windows 2000. More modern is no longer supported by Windows 2000, this is why you probably encounter problems installing it.

  You can use one of the free utilities Virtual Machine to run Windows 2000 on your system:

  You can use alternatives such as Oracle VirtualBox or VMWare Player.

  https://www.VirtualBox.org/wiki/downloads

  VMware Player;

  http://downloads.VMware.com/d/details/player_401/dGpkYnRwd3didGRwQA==

• Error "this program is blocked by group policy. For more information, contact your system administrator. "downloading program.

  Original title: virus

  I can't download new programs, changing the date or make a few changes to my computer, that is the message I get "' this program is blocked by group policy. For more information, contact your system administrator ' ' how can I solve this problem.

  Hello

  Thanks for posting your query to the Microsoft forum. I will definitely help you with this.

  I would like to know;

  1. Your computer is connected through a network of field?
  2. You did it any significant hardware or change software on the computer before this problem?
  3. You have any other security software installed in the system or that you have uninstalled earlier?

  The question could arise due to lack of permissions due to the remains of some program in the uninstalled registry before. To further diagnose the problem, I would suggest trying the following methods and check if the problem persists.

  Method 1:

  Run the next fixit and check if the remains of any previously uninstalled security software is deleted.

  The problems that the programs cannot be installed or uninstalled

  Method 2:

  Give all the permissions on your user account and check if it helps.

  Follow the steps to give all permissions:

  a. press the Windows key + R, type regedit.exe in the Run dialog box and press enter.

  b. right-click on HKEY_LOCAL_MACHINE , and then click permissions.

  c. click Add under the Security tab and add a new group: everyone.

  d. Select everyone and check the option: total control.

  e. restart the computer and check if the problem is solved or not.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756/en-us

  Method 3:

  Please see the advice given by HappyAndyK April 26, 2014.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-security/group-policy-on-Windows-81-issue/8a524894-fa6c-41AE-9E26-29ec4ccca36c

  System Restore warning: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Let us know if you need more assistance. We will be happy to help you.

  _____________________

  Thank you best regards &,.

  Isha Soni

• ConfigFree on Satellite A100-413 Setup error

  Helle everyone,

  I just removed the notebook Windows XP MCE of mij forum, Francois, it's that I don't want any stuff-tools than thosiba on my laptop.

  So I installed windows XP Pro LEGAL. All the drivers are working perfect but miss me one tool of Toshiba.
  It is his network manager, whireless, bleutooth etc. which apears right at the bottom of the screen (this isn't a system tray icon)

  Now if I whas fix included in configfree (or confree)
  So thinking, I downloaded the zip and run the insite facility there.

  The result is an error "the installation image is not correct.

  All knows how to get this Setup working of our get this program I whas talk on my computer?
  Excuse me for my bad English

  You talk about the Toshiba Configfree application.
  I don't know why the Setup error appears, but I wouldn't reinstall this tool m.
  You can find it on the page of the Toshiba driver A100 section.
  But there are 3 different satellite A100, so be sure that you have chosen the right way.
  After removing the BONE in addition Configfree & remove programs, you must restart the unit, and then you try to install it again.

• The program is blocked by group policy, you contact the administrator

  original title: group policy

  I get an error when I try to play legally purchased game just cause 2

  the program is blocked by the foundations of the group, contact your administrator

  I have legal win 7 ultimate

  I don't know where or how or why this restriction is in Group Policy (you are on a domain network or is it a computer sttand-only or only connected to an ad hoc network).  If connected to a domain, the restriction may be from the server in which case you need to talk to the server administrator to understand why it is there and if it can be removed.

  If it is a home network or a stand-alone computer, access you group policy editor by going to start / search box and type in the Group Policy Editor, and then double-click on the icon for the program that apppears.  You will now be in the editor.  That is the problem - there is no way to search for the Publisher, so essentially you must check all entries to find the one that is blocking you.  On my system, no policy was in place by default, so I don't know how your got policies implemented - but if she says that group policy is causing this program is the solution.  I wish there were an easier way, but I know not at all.

  Sometimes blocks of security software programs by using Group Policy, so it is possible, this is how it happened--unfortunately, it does not help us find the location of the block, so it can be deleted.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cannot install on XP Pro SP3: "Service Pack 3 Setup error - the system cannot find the file specified."

  I am trying to install SP3 on my XP Pro.  I get a notice on my screen, stating: "Service Pack 3 Setup error - the system cannot find the file specified."  Don't know what I'd do.  Thank you.  Peter glass

  That's good news. I think you also need to analyze of rootkits being on the right side. So, now:

  Search for rootkits with a program SPECIALLY designed to detect and remove the (aswMBR):

  http://public.avast.com/~Gmerek/aswMBR.htm

  Download this file to your desktop. Double-click the icon to run the program. When the opportunity to download and install the latest Avast definitions do.

  Run a scan. Results in red indicate that this was not a false positive! Do you need to remove the rootkit (including "FixMBR" if necessary).

  And finally, leave your PC on overnight and search for viruses, using this site:
  http://www.eset.com/us/online-scanner/
  Once we are convinced that your PC is clean, here are my instructions (just in case where you still cannot run batch of Geek-Tech file, etc.):

  1. download the installation of SP3 and IE8 (beforehand) files. I prefer to keep these (and other useful files) on a USB key, but this is optional. Here are the links for the installation files:

  http://www.Microsoft.com/download/en/details.aspx?ID=24 (for SP3)

  (You can TOTALLY ignore the message "intended for it professionals"!)

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=43 (for IE8)

  (You need to install IE8 AFTER SP3! Trust in me.)

  IMPORTANT NOTE!

  It is VERY important to ensure that Internet Explorer is at the level IE6 before installing SP3. In case you have IE7 or IE8, you must uninstall it / them, using the Control Panel Add / Remove programs. Let us know if you need assistance with this.

  Once again:

  Make sure that IE is IE6 level before installing SP3. You can go directly from IE6 to IE8 after SP3 has been installed.

  2. disconnect Internet. Also unplug all unnecessary devices.

  3. temporarily disable the automatic updates. To do this:

  Start | Control Panel (switch to Classic view if not already selected). Automatic updates

  4 set up a clean boot. The last thing you need is for a program that runs in the background to interfere with these updates! (It happens!) For more information:

  http://support.Microsoft.com/kb/310353

  (Note that this is the same as setting up a "Diagnostic boot.")

  Reset.

  5 install the SP3. Restart TWICE.

  6 switch to IE8. Restart TWICE.

  (What happens very often is that someone has their software antivirus running as they try to install SP3, which often translates into chaos! "This is why it must be done after installing SP3 and IE).

  7 unscrew the clean boot. (That is, return to the Normal startup).

  8 make sure that firewall Windows is activated (it should already be):

  Start | Control Panel | Security Center

  9 visit Windows Update to download and install only the critical security updates. Restart each time you are prompted.

  10 re - enable automatic updates.

• Service Pack 1 Setup error. -The server has failed

  original title: Service Pack 1 Setup error. Windows XP Home 32 bit

  The following occurred during the installation of Service Pack 1a tried to download files from the service pack 1 on the internet:

  The server did not respond.

  This happened again and again I clicked retry. The program tries to connect to http://xpSP1.microsoft.com/isapi/pstream3.dll/xp/SP1.USA.1106a

  I also followed the links he is said to take on the web page of the service pack for installation troubleshooting. I am only given a choice to restore the default settings on the automatic updates. I have not automatically updated.

  You try to update a system restore which is now Windows XP 'Or' (without service pack)?

  If so, please read the tips following long-standing MS MVP PA Bear.

  If this isn't the case, please explain what you are trying to do.

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything in the list below, in order, before connecting the machine to the internet or a local network (i.e. other computers) and before you plug in a flash, SD card, or any other external computer diskotherwise:

  1. Make sure that the Windows Firewall is enabled.
  2. Uninstall any moment invalid Norton, McAfee, etc., free version of test which was also reinstalled, run the appropriate removal tool (see below), and then install an application antivirus of your choice (for example, http://www.microsoft.com/security_essentials/default.aspxMicrosoft Security Essentials- free).
  3. Arrival to Windows Update & get the computer fully patched.
  4. Install Windows Defender [Editor's Note: obsolete; do not install] or another anti-spyware application that integrates a real-time protection.

  TIP: Use another and negative computer to download programs for, for example, SP2 or SP3 installation, the installer for your new anti-virus application and or other removal tools cited below. Transfer these files to CD or DVD (not a flash drive) and then transfer the files of the CD or DVD on the desktop of the computer you are using.

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  TIP: After getting the computer fully patched, download/install KB971029 manually before connecting any external drive to your computer: http://support.microsoft.com/kb/971029 [1]

  VERY IMPORTANT! => Any Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You need TO uninstall the trial for free AND download/run the appropriate removal BEFORE tool to install updates, the Windows Service Packs, or updates of IE AND BEFORE installing your new antivirus application (for example, Microsoft Security Essentials - free).

  Norton Removal Tool
  FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
  http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  =========================================
  [1] in force 08 Feb-11, KB971029 will be offered through Windows Update.

• Service Pack 3 Setup error: "Service Pack 3 Setup cannot update an active (debug) system with a free (retail) version of Service Pack 3, or vice versa"

  Service Pack 3 Setup error: "Service Pack 3 Setup cannot update an active (debug) system with a free (retail) version of Service Pack 3, or vice versa"

  I have XP SP3 download Tuff. I have a Dell Inspiron 16000 w / XP Edition home (version 2002) W / SP 2 is installed.  I couldn't find a reference to the error in line last night.  Can anyone help?

  Turbo Tax 2011 says that I can not download their stuff until I get my XP Stuff to the height.

  Only 6 more days until what the tax man will come :-)...

  Help!

  Put your search inside the quotes term allows when you search for the exact error messages:

  "Service Pack 3 installation cannot update an active (debug) system with a free (retail)"

  The first shot has the answer: http://www.askvg.com/windows-xp-sp3-setup-error-cannot-update-a-checked-debug-system-with-a-free-retail-version-of-service-pack-3/

  CurrentType at HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion value should read "Uniprocessor Free" or "free multiprocessor".

  John

• Error 65535 and Turbo Tax uninstalls the product.

  Hello

  I'm having a similar problem with Windows XP Home Edition.  I try to install Turbo Tax 2010.  The product seems to install fine, but the final stages occurs an unexpected error 65535 and Turbo Tax cancels (or uninstall) of the product.  Turbo tax site suggested I install the .net tool I did, but he says that it cannot find the installation or the CD.  I did as you suggested and ran sfc/scannow and the system tells me that there are critical files from the Windows XP Professional Service Pack 3 that are not, please insert the disc 3.  Well I don't have any of the disks as installed as part of an update of windows Service Pack 3.  I cannot reinstall the product without uninstalling the current version through the Microsoft Update site.  I can do this, but my system gives me a list of programs that may not work once the service pack is uninstalled (I guess this would be corrected once the relocation takes place).  Is it possible that I can get around this?  It does not seem that I can download SP3 and create the CD or is it?  My computer is a Dell XPS.  Thank you!

  Hi Tax2010,
   
  You cannot run the System File Checker scan if you don't have a CD of Windows XP Service Pack 3.
   
  Try the steps listed in the following items:
   
   
  Troubleshoot installation and execution of TurboTax (Windows)
   
  Error code 65535: "unexpected error".

• Can't save changes made to the photos. Claims "error in Gallery blocks save ' how can I save the changes?

  When cropping or erase red-eye or auto adjust color, a box appears that says, error in Gallery blocking save.   Very frustrating...

  ==========================================
  Windows Photo Gallery... Cannot save modified photos...
  ==========================================

  No guarantee, but the news shows might offer some ideas.

  Proceed at your own risk *.

  Good luck...

  --

  (1) try to do a system restore to an hour before
  the problem started.

  With the help of the Windows Vista system restore
  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  --

  (2) I've seen reports that this problem may be related
  Kodak Easy Share software. Installation "Kodak
  Single-action Version 8 for Windows from the
  the following link may be the solution.

  Kodak Easy Share 8 software version
  http://www.kodak.com/eknec/PageQuerier.jhtml?PQ-path=130&PQ-locale=en_US&_requestid=5320
  (FWIW, it's a good idea to create a system)
  restore point before installing software or updates)

  --

  (3) I saw reports that could clarify the next steps
  until the question...

  Right click the library icon and choose
  "Run as Administrator"

  --

  (4) I copied the info from a tech forum on
  the net... I don't know if it works, but maybe it's
  worth a try:

  A. right click on Task Manager open the
  taskbar on the bottom of your screen and choosing
  The task in the menu Manager.

  B. click the tab process, along the upper part of the
  The Task Manager screen.

  C. in the process tab, select the corresponding button at the bottom
  left of the screen that says "show processes of.
  all users"and click on it. Click 'Continue' to the UAC
  the prompt that appears.

  D. the screen should turns off a moment, then
  back with much more than process listed. Click
  the "Command line" column to sort the list and
  Search:

  "C:\Program Files\Windows Media Player\wmpnetwk.exe"

  Read the description in the next section on:

  Windows Media Sharing Service reader network

  F. click on this process. Click the end «»
  Treat button"at the bottom right of the screen.
  Confirm 'End process' if necessary.

  You should now be able to save your changes to
  your photos normally. The bad news is that this
  should be performed whenever you start or restart Vista.
  And I don't know how to prevent the situation from
  in the first place of loading.

  --

  5) posted by: artologik
  The solution came to me when I could not recreate
  the problem on a laptop with Vista Home.
  Everything I could compare, I noticed that the
  %Path% environment variable was not between different
  the 2 machines.

  I guess that WLPG relies on the dll must be found
  on the way to the system; When not found, it must return
  Back to ' base or incomplete "library finds it
  the default specific paths or the user. The solution for
  me has been to ensure the entire path system
  to the folders in the order appropriate.

  To fix, follow these steps:

  A. right click on the COMPUTER icon on the
  desktop and choose PROPERTIES

  B. choose ADVANCED SYSTEM SETTINGS

  C. Si you are prompted by UAC to allow, go ahead.
  and ALLOW

  D. click on ENVIRONMENT VARIABLES...

  E. in the bottom half, under SYSTEM VARIABLES,.
  Find the PATH variable and highlight the

  F. click the button CHANGE

  G. ensure that what starts with
  % SystemRoot%\system32;%SystemRoot%;

  H. ensure you that a semicolon separates each entry.

  I. click OK three times

  J. restart the computer

  Good luck...

• SharePoint Server 2007 - this program is blocked due to compatibility issues

  During the installation of Sharepoint Server 2007 standard or Premium it came with an error: this program is blocked due to compatibility issues

  SHAREPOINT FORUMS:
  http://social.msdn.Microsoft.com/forums/en/category/SharePoint/

• disable the alert popup "some programs are blocked.

  Remember - this is a public forum so never publish information such as e-mail or telephone how to disable the pop-up window which keeps telling me that some programs can not be opened? loved ones!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  It depends on your operating system (vista most likely) and why programs are blocked in the first place... Very probably to many programs at startup... It is easy to disable... If you right-click on the banner and disable the warning or launch programs...

  Jared Gray - checked CrossLoop Helper - www.crossloop.com/jaredgray

• BlackBerry World: "application setup error".

  I made a simple program called "Custom dice. When I launch from the NDK BlackBerry on my Dev Alpha, it works fine. However, when I try to install my application on BlackBerry World, I get this rather vague error message: "application setup error". Is attached a screenshot of this error. I have absolutely no idea what could cause this error. Someone has any advice how to solve this problem, what I could do to find the cause of this error? Thank you!

  I can confirm that the application now installs fine. What gives some help apparently contributed time