Setup error: unknown database 'HQ '.

Similar Questions

• Setup error CS6, inconsistency in the database of the installer, code output 15

  Hello

  I am trying to install Photoshop CS6 on my new Mac.

  After asking 2%, I get the error message "Setup error CS6, inconsistency in the database of the installer."

  The file of summary shows error code fatal exit 15 and 0 errors/errors/warnings.

  I've seen the other threads in this forum with the same error and I tried the only suggestions here, but so far no luck.

  My Photoshop CS6 is a version downloaded from the Adobe Web page. Everything works fine until the installation begins.

  These are the actions that I have tried:

  1. restart and reinstall

  2 cleaning adobe tool (no result because there was nothing to clean up)

  3. I have disabled the software from my old computer

  4 tried to install it in safe mode

  5. I was contact Adobe support, did not get much support at all. After awhile, I was told to open a discussion in this forum.

  Please help... spent two days on this already.

  Jeff,

  Finally... The problem is resolved.

  I contacted chat support and the person I spoke to connected to my computer and only could find a corrupt file that caused the whole issue.

  Once the file has been deleted, installation could be completed without any problems.

  Thank you for your support.

• Well, Fldid32 (TA_CLASS) has failed. TMIB: LIBFML_CAT:8: ERROR: unknown domain name.

  Now, I'm trying to access the TMIB service by shaking as a result of this article http://wenku.baidu.com/view/fe071e628e9951e79b89278d.html

  Some parts are in Chinese, but you can guess what he says.

  The problem is, after the bottom of the article, I have this error in the console: bea.jolt.ServiceException: data conversion failed. Check the log file

  In the log file, I find

  Fldid32 (TA_CLASS) has failed. TMIB: LIBFML_CAT:8: ERROR: unknown domain name.  Maybe FIELDTBLS32 is not properly defined.

  What I put in the environment variable is

  FIELDTBLS32 = tpadm, Usysfl32, evt_mib; export FIELDTBLS

  FLDTBLDIR32 = $TUXDIR/udataobj; export FLDTBLDIR

  So what's the problem with my setup?

  Hello

  Not sure if it was a mistake to cut + paste on this forum but export declarations are missing "32" at the end:

  *******************************

  What I put in the environment variable is

  FIELDTBLS32 = tpadm, Usysfl32, evt_mib; export FIELDTBLS

  FLDTBLDIR32 = $TUXDIR/udataobj; export FLDTBLDIR

  *****************************

  They must be:

  export FIELDTBLS32

  export FLDTBLDIR32

  Kind regards

  Bob Finan

• The Instance of product registration error message: "system failure: Error retrieving database xml file.

  Hi intend installation gurus,
  
  do you have hopefully solve this problem and I am also facing the same problem "Error creating instance" during the installation of Planning 9.3.1. I tried the reconfiguration of 30 to 50 times each time problem...
  
  
  OS: Vista Premium
  SQL Server 2005
  Essbase:9.3.1
  
  
  Error message: "system failure: Error retrieving database xml file.
  
  
  Details of error:
  at com.hyperion.planning.event.HspSysExtChangeHandler.run (unknown Source
  )
  He can't get the JDBC connection for external change SYS actions.
  He can't get JDBC connection.
  java.lang.NullPointerException
  at com.hyperion.planning.sql.HspSQLImpl.getConnection (unknown Source)
  at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller (exercise
  WN Source)
  at com.hyperion.planning.event.HspSysExtChangeHandler.run (unknown Source
  )
  He can't get the JDBC connection for external change SYS actions.
  He can't get JDBC connection.
  java.lang.NullPointerException
  at com.hyperion.planning.sql.HspSQLImpl.getConnection (unknown Source)
  at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller (exercise
  WN Source)
  at com.hyperion.planning.event.HspSysExtChangeHandler.run (unknown Source
  )
  He can't get the JDBC connection for external change SYS actions.
  He can't get JDBC connection.
  
  
  Please give Solution

  Hello

  I don't understand why this is the case, it may be up to Vista, the details in the file properties appear to be correct
  except the encrypted password too short
  SYSTEM_DB_PASSWORD = GGAKFJ
  have you changed it before posting?

  Also you can try to change
  SYSTEM_DB_URL = jdbc:hyperion:sqlserver://neeraj-PC:1433
  to use your ip address just to test, if you change it after you have saved you will need to make sure that you have closed the configuration utility and then restarted, it.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• ConfigFree on Satellite A100-413 Setup error

  Helle everyone,

  I just removed the notebook Windows XP MCE of mij forum, Francois, it's that I don't want any stuff-tools than thosiba on my laptop.

  So I installed windows XP Pro LEGAL. All the drivers are working perfect but miss me one tool of Toshiba.
  It is his network manager, whireless, bleutooth etc. which apears right at the bottom of the screen (this isn't a system tray icon)

  Now if I whas fix included in configfree (or confree)
  So thinking, I downloaded the zip and run the insite facility there.

  The result is an error "the installation image is not correct.

  All knows how to get this Setup working of our get this program I whas talk on my computer?
  Excuse me for my bad English

  You talk about the Toshiba Configfree application.
  I don't know why the Setup error appears, but I wouldn't reinstall this tool m.
  You can find it on the page of the Toshiba driver A100 section.
  But there are 3 different satellite A100, so be sure that you have chosen the right way.
  After removing the BONE in addition Configfree & remove programs, you must restart the unit, and then you try to install it again.

• error: unknown file system

  Hello users of HP, I use ProBook 4530 s. Last year, I installed Microsoft Professional Home 64 bit. Yesterday, I delete the partition from my linux system and after that I get the following error;

  error: unknown file system.

  Enter rescue mode...

  grub rescue >

  I also followed the steps for recovery, but failed. How? I put the DVD in the window and the restart, after the initial stages, the screen on the install, I click on 'Recovery Option '. I received the message that the I have Window 7 is installed. After you click Next, it is said that the resovery window option is not compatible with the window. What to do in this case. I have install this window in my country, now I am in China, where every product of the window is in Chinese. Secondly, I have a lot more data research everything I hope you not own format in all cases. Please help me if possible guys.

  Best looks ahead

  as it happened after that you deleted linux I suggest to download an iso of ubuntu and start to see it if you anywhere

• DAQmx Setup error

  I have a brand new with Windows7 - 64 bit.  I installed LV 2010 RT, FPGA and all drivers. No problem.  I then installed LV 2012 with RT, FPGA, a few tools and drivers.  I got an error when installing on DAQmx.  I told him to continue.  Then, I got an error at the end saying that something was not installed correctly.  The two messages are attached below.  I have uninstalled all NOR associated and repeated.  Same result.  I can open and run LabVIEW 2010 and 2012.  I can open MAX.  However, when I attach a USB-6008 to the computer, it is said that the driver is not loaded.  MAX can't see the 6008.  Which, of course, corresponds to the Setup error.  Any ideas how can I fix?

  Thank you

  DaveT

  Hi Dave,.

  This problem is often related to anti-virus software. You have any antivirus running on your new computer software? If you do, please try to uninstall DAQmx, disable the active virus scan utility and install the drivers as administrator.

  I hope this helps! Thank you

• Active Directory certificate services installation failed with the following error: unknown mapping algorithm. 0 X 80091002 (-2146889726 CRYPT_E_UNKNOWN_ALGO)

  Hello

  I installed the role of CA of the authority in the installation, I want to use the existing root certificate when I try to import this certificate .pfx, that I have this error

  Active Directory certificate services installation failed with the following error: unknown mapping algorithm. 0 X 80091002 (-2146889726 CRYPT_E_UNKNOWN_ALGO)

  Anyone know what's wrong

  Thanks for help.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Windows could not search for new updates. 8007007E error (unknown error)

  Friday, 3/4, I did a windows update and downloaded and applied Windows Live Essentials.  When it restarted, my computer crashed.  Somehow, I was able to come back to life, but Windows Live Messenger has stopped working (did not connect).  I uninstalled and reinstalled several times, clean cache contacts, use the Windows Installer Cleanup tool and everything I could find.

  In addition to this, when I go to Windows Update now it states: not Windows is able to check for new updates.  8007007E error (unknown error)

  Also, I noticed that I have a few updates installed in the history of the update, but when I click on "installed updates" to try to remove them, they are not in this list.  They are:
  -Office Live add in
  -Windows Live Essentials
  -Windows Powershell 1.0

  Hi bennyeos

  Thanks for posting your questions to answers.microsoft.com

  Keeping in line with what said Sohail Patel, the functions for the 831429 KB are for XP and older versions, but which must take place for your question are measures which would be beneficial for this update.

  Here is a link to SFC/scannow Vista procedure, please follow and understand any corrupt file errors found and paste this information into the post on the forum.

  http://support.Microsoft.com/kb/929833

  If this corrects any file corruption, try again the updates.  If it's not here is a link to a forum that describes the registration of the dll.

  Please follow the instructions to register the dll in a batch file and then try the updates.

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/f02efc4b-7D6A-48df-8d85-5f6a36de6161/

  Let us know if you have any questions or if you need further assistance for the purpose this.

  Best regards

  Debbie Microsoft Support Engineer answers visit our Forum of Microsoft answers Feedback and let us know what you think.

• Cannot install on XP Pro SP3: "Service Pack 3 Setup error - the system cannot find the file specified."

  I am trying to install SP3 on my XP Pro.  I get a notice on my screen, stating: "Service Pack 3 Setup error - the system cannot find the file specified."  Don't know what I'd do.  Thank you.  Peter glass

  That's good news. I think you also need to analyze of rootkits being on the right side. So, now:

  Search for rootkits with a program SPECIALLY designed to detect and remove the (aswMBR):

  http://public.avast.com/~Gmerek/aswMBR.htm

  Download this file to your desktop. Double-click the icon to run the program. When the opportunity to download and install the latest Avast definitions do.

  Run a scan. Results in red indicate that this was not a false positive! Do you need to remove the rootkit (including "FixMBR" if necessary).

  And finally, leave your PC on overnight and search for viruses, using this site:
  http://www.eset.com/us/online-scanner/
  Once we are convinced that your PC is clean, here are my instructions (just in case where you still cannot run batch of Geek-Tech file, etc.):

  1. download the installation of SP3 and IE8 (beforehand) files. I prefer to keep these (and other useful files) on a USB key, but this is optional. Here are the links for the installation files:

  http://www.Microsoft.com/download/en/details.aspx?ID=24 (for SP3)

  (You can TOTALLY ignore the message "intended for it professionals"!)

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=43 (for IE8)

  (You need to install IE8 AFTER SP3! Trust in me.)

  IMPORTANT NOTE!

  It is VERY important to ensure that Internet Explorer is at the level IE6 before installing SP3. In case you have IE7 or IE8, you must uninstall it / them, using the Control Panel Add / Remove programs. Let us know if you need assistance with this.

  Once again:

  Make sure that IE is IE6 level before installing SP3. You can go directly from IE6 to IE8 after SP3 has been installed.

  2. disconnect Internet. Also unplug all unnecessary devices.

  3. temporarily disable the automatic updates. To do this:

  Start | Control Panel (switch to Classic view if not already selected). Automatic updates

  4 set up a clean boot. The last thing you need is for a program that runs in the background to interfere with these updates! (It happens!) For more information:

  http://support.Microsoft.com/kb/310353

  (Note that this is the same as setting up a "Diagnostic boot.")

  Reset.

  5 install the SP3. Restart TWICE.

  6 switch to IE8. Restart TWICE.

  (What happens very often is that someone has their software antivirus running as they try to install SP3, which often translates into chaos! "This is why it must be done after installing SP3 and IE).

  7 unscrew the clean boot. (That is, return to the Normal startup).

  8 make sure that firewall Windows is activated (it should already be):

  Start | Control Panel | Security Center

  9 visit Windows Update to download and install only the critical security updates. Restart each time you are prompted.

  10 re - enable automatic updates.

• Service Pack 1 Setup error. -The server has failed

  original title: Service Pack 1 Setup error. Windows XP Home 32 bit

  The following occurred during the installation of Service Pack 1a tried to download files from the service pack 1 on the internet:

  The server did not respond.

  This happened again and again I clicked retry. The program tries to connect to http://xpSP1.microsoft.com/isapi/pstream3.dll/xp/SP1.USA.1106a

  I also followed the links he is said to take on the web page of the service pack for installation troubleshooting. I am only given a choice to restore the default settings on the automatic updates. I have not automatically updated.

  You try to update a system restore which is now Windows XP 'Or' (without service pack)?

  If so, please read the tips following long-standing MS MVP PA Bear.

  If this isn't the case, please explain what you are trying to do.

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything in the list below, in order, before connecting the machine to the internet or a local network (i.e. other computers) and before you plug in a flash, SD card, or any other external computer diskotherwise:

  1. Make sure that the Windows Firewall is enabled.
  2. Uninstall any moment invalid Norton, McAfee, etc., free version of test which was also reinstalled, run the appropriate removal tool (see below), and then install an application antivirus of your choice (for example, http://www.microsoft.com/security_essentials/default.aspxMicrosoft Security Essentials- free).
  3. Arrival to Windows Update & get the computer fully patched.
  4. Install Windows Defender [Editor's Note: obsolete; do not install] or another anti-spyware application that integrates a real-time protection.

  TIP: Use another and negative computer to download programs for, for example, SP2 or SP3 installation, the installer for your new anti-virus application and or other removal tools cited below. Transfer these files to CD or DVD (not a flash drive) and then transfer the files of the CD or DVD on the desktop of the computer you are using.

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  TIP: After getting the computer fully patched, download/install KB971029 manually before connecting any external drive to your computer: http://support.microsoft.com/kb/971029 [1]

  VERY IMPORTANT! => Any Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You need TO uninstall the trial for free AND download/run the appropriate removal BEFORE tool to install updates, the Windows Service Packs, or updates of IE AND BEFORE installing your new antivirus application (for example, Microsoft Security Essentials - free).

  Norton Removal Tool
  FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
  http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  =========================================
  [1] in force 08 Feb-11, KB971029 will be offered through Windows Update.

• Service Pack 3 Setup error: "Service Pack 3 Setup cannot update an active (debug) system with a free (retail) version of Service Pack 3, or vice versa"

  Service Pack 3 Setup error: "Service Pack 3 Setup cannot update an active (debug) system with a free (retail) version of Service Pack 3, or vice versa"

  I have XP SP3 download Tuff. I have a Dell Inspiron 16000 w / XP Edition home (version 2002) W / SP 2 is installed.  I couldn't find a reference to the error in line last night.  Can anyone help?

  Turbo Tax 2011 says that I can not download their stuff until I get my XP Stuff to the height.

  Only 6 more days until what the tax man will come :-)...

  Help!

  Put your search inside the quotes term allows when you search for the exact error messages:

  "Service Pack 3 installation cannot update an active (debug) system with a free (retail)"

  The first shot has the answer: http://www.askvg.com/windows-xp-sp3-setup-error-cannot-update-a-checked-debug-system-with-a-free-retail-version-of-service-pack-3/

  CurrentType at HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion value should read "Uniprocessor Free" or "free multiprocessor".

  John

• Download error: Unknown Publisher / is not an application valid win 32

  I can't download anything. My hijack this wont even work. Previous download exe. files do not work I get a
  Download error: Unknown Publisher / is not an application valid win 32 I have Win xp.  Firefox browser on a gateway netbook. No floppy drive or c/d.

  No location with AVG or Malewarebytes Virus. AVG update itself. Security Windows has done as well.

  I was trying to Messenger from yahoo to d/l, then updating firefox.  Nada.

  Hello

  · Were there any changes made on the computer before the show?

  · Who is the service pack installed?

  1. try to download files from Internet explore and check the results.

  2. empty the Temp folder:

  a. Click Start, point to programs, point to Accessories, point to system tools and then click on disk cleanup.

  b. click C: or click the drive where Windows XP is installed and then click OK.

  c. Click to select the temporary files check box.

  d. click OK and then click Yes to confirm the deletion.

• Windows Automation api. Setup error: cannot update your XP files because the language installed is different from the update.

  Installing Win AP Automation! 3.0 to accelerate VB Express 2010.

  Warning message:

  Update for MS Wim (KB971513) Setup error

  Setup cannot update your Windows XP files because the language installed on your system is different from the update language.

  My XP language is Norwegian. The rest of my 'stuff' MS is English.

  
  

  • What you have already tried to solve the problem

  Hello

  I suggest you to check the article mentioned below.

  Error message: Setup cannot update your Windows XP files

  http://support.Microsoft.com/kb/555042

  I suggest to select the language appropriate to the download page and check if you are able to install the update on the system or not. The update that you are trying to install on the system must be of the same language as installed.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Windows Update has encountered an error unknown coed 80072EFE

  Windows Update has encountered an error unknown coed 80072EFE

  Hi Larry,

  I suggest you follow the link and check if it helps.

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates